A Series High Performance 3-Phase RFI Power Line Filters for WYE Applications UL Recognized CSA Certified TUV Approved* AYP / AYT A Series The 3-phase filters are designed for 3-phase, four wire, WYE applications providing filtering in each of the three lines plus the neutral and ground line. The 3-phase models feature: * Both common mode and differential mode suppression from 50 kHz to 30 MHz * Effective for both balanced and unbalanced three phase loads Specifications Maximum leakage current, each line-to-ground @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: 1.4 mA 3.4 mA Hipot rating (one minute): line-to-ground neutral-to-ground line-to-neutral 1500 VAC 1500 VAC 1450 VDC * Ground choke included Operating frequency: 50/60 Hz * Made to IEC 380 specifications * Shielded construction Rated voltage: phase-to-phase phase-to-neutral/ground 440 VAC 250 VAC The dual stage AYT provides higher performance, while the single stage AYP is good for lower noise environments. Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Electrical Schematics AYP6C Models Current Rating Frequency-MHz .05 .1 .15 .5 1 5 10 30 AYP6C 20A 30A 45A 60A 22 15 8 5 32 24 19 16 39 30 25 22 55 55 49 50 56 55 49 50 65 61 56 54 65 63 58 54 54 50 45 47 AYT6C 20A 30A 45A 60A 45 29 15 12 63 53 36 37 70 61 43 46 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 70 65 60 50 45 Line-to-line in 50 ohm circuit AYT6C Models A 6 Resistor location for reference only. * 20AYT6C and 60AYT6C only. Current Rating Frequency-MHz .05 .1 .15 .5 1 5 10 30 AYP6C 20A 30A 45A 60A 20 18 8 20 38 28 20 24 50 43 27 27 65 65 60 60 65 65 65 65 65 65 65 65 60 59 56 56 52 48 43 50 AYT6C 20A 30A 45A 60A 27 17 14 26 56 46 41 50 65 55 50 58 70 75 75 75 70 75 75 75 70 75 75 75 70 75 75 75 70 70 65 60 Libertyville, IL (847) 680-7400 Series A Case Style Metric shown in italics. AYP6C & AYT6C Case Dimensions Metric shown in italics. Part No. A* (max) B (max) C (max) D .030 .76 E .015 .38 20AYP6C 8.82 224.0 5.57 141.5 2.56 65.0 4.616 117.2 1.5 38.1 30AYP6C 8.82 224.0 5.57 141.5 2.56 65.0 4.616 117.2 1.5 38.1 45AYP6C 9.43 239.5 6.92 175.8 4.82 122.4 5.95 151.1 3.75 95.3 60AYP6C 9.43 239.5 6.92 175.8 4.82 122.4 5.95 151.1 3.75 95.3 20AYT6C 13.82 351.0 5.57 141.5 2.56 65.0 4.616 117.2 1.5 38.1 30AYT6C 13.82 351.0 5.57 141.5 2.56 65.0 4.616 117.2 1.5 38.1 45AYT6C 13.83 351.3 6.92 175.8 4.82 122.4 5.95 151.1 3.75 95.3 60AYT6C 13.83 351.3 6.92 175.8 4.82 122.4 5.95 151.1 3.75 95.3 End Bell Mounting Accessory End Bell mounting accessory available in two sizes, 20/30 amp and 45/60 amp. * For end bell covering terminals and connections, add: 20A & 30A 5.57 141.48 45A & 60A 6.45 163.83 Ordering Information Consult your local Corcom sales representative for pricing. Mounting Hardware Mounting Bracket Kit with KEPS Nuts: AA400 (20/30 Amp) AA405 (45/60 Amp) End Bell Kit with KEPS Nuts: AA406 (20/30 Amp) AA407 (45/60 Amp) Additional KEPS Nuts to Mount Filters: AA401 10 Filters Libertyville, IL (847) 680-7400 Available Part Numbers 20AYP6C 30AYP6C 45AYP6C 60AYP6C 20AYT6C 30AYT6C 45AYT6C 60AYT6C A 7