!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. P50E1.pdf 05.3.30 CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Murata Manufacturing Co., Ltd. Cat.No.P50E-1 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E1.pdf 05.3.30 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CONTENTS 1 2 CERAFILr and "CERAFIL" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. 3 Part Numbering 2 4 1 CERAFILr 10.7MHz Small Chip Type SFECF Series 6 2 CERAFILr 10.7MHz Ultra Thin Chip Type SFECD Series 9 3 CERAFILr 10.7MHz Chip Type SFECV Series 11 6 4 CERAFILr 10.7MHz Standard Lead Type 15 7 5 CERAFILr 10.7MHz Low Loss Type 18 6 CERAFILr 10.7MHz Low Profile Type 21 7 CERAFILr 10.7MHz Low Spurious Response Type 24 8 9 8 CERAFILr 10.7MHz Wide Bandwidth Type 27 10 9 CERAFILr 10.7MHz Narrow Bandwidth Type 29 10 CERAFILr 10.7MHz for FM-IF Tuners 32 11 CERAFILr 10.7MHz High Selectivity Type SFTLF Series 37 12 40 13 CERAFILr 10.7MHz Related Data on Lead Type 5 11 12 CERAFILr 4.5-6.5MHz Chip Type SFSKA Series 41 13 CERAFILr 4.5-6.5MHz Standard Lead Type SFSRA Series 42 14 CERAFILr 3.5-6.5MHz for Chroma Signal SFSRA/F Series 48 14 15 15 CERAFILr 455kHz Chip Type PFWCC Series 49 16 16 CERAFILr 455kHz Chip Type SFPKA Series 51 17 CERAFILr 455kHz SFULA/SFZLA Series 53 17 18 CERAFILr 455kHz PFSLF/PFWLF Series 56 18 19 CERAFILr 455kHz SFPLA/CFWLA Series 58 19 20 CERAFILr 455kHz for AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series 60 21 CERAFILr 455kHz for AM Search-stop Signal Detection 62 CERAFILr 455kHz SF/PF Series Temperature Characteristics 63 20 21 CERAFILr 455kHz SF/PF/BF Series Application Circuit 64 22 23 22 Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series 66 23 Ceramic Trap 4.5-6.5MHz Chip Type Double Traps TPWKA Series 67 24 Ceramic Trap 4.5-6.5MHz Standard Lead Type TPSRA Series 68 24 25 Ceramic Trap 3.5-6.5MHz Two Lead Type TPSRF_J Series 71 25 26 Ceramic Trap 3.5-6.5MHz for 2ch Sound TV in Germany TPSRF_W Series 74 27 Ceramic Trap 3.5-6.5MHz Double Traps TPWRF Series 75 26 28 Ceramic Trap 3.5-6.5MHz Triple Traps TPTRF Series 77 29 Ceramic Discriminator 10.7MHz Ultra Thin Chip Type CDSCB Series 78 30 Ceramic Discriminator 10.7MHz Standard Lead Type CDALF Series 81 Ceramic Discriminator 10.7MHz Appllied IC Reference Table 85 27 28 29 87 30 Notice (Soldering and Mounting) 89 31 Notice (Handling) 94 31 Ceramic Discriminator 3.5-6.5MHz Wide Bandwidth Type CDSRF Series Packaging 102 Recycled Paper P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. o Part Numbering CERAFILr for FM (Part Number) SF E LF q w e 10M7 FAA0 r -B0 t y qProduct ID tProduct Specification Product ID Code SF Ceramic Filters FAA0 wOscillation/Numbers of Element Product Specification Four-digit alphanumerics express pass-bandwidth, center frequency tolerance, rank, series, others. Code Oscillation/Numbers of Element E 2 Elements Thickness Expander mode T 3 Elements Thickness Expander mode Code V 2 Elements Thickness Expander mode (2nd Harmonic) -B0 Bulk -R0 Plastic Taping o180mm K 2 Elements Thickness Expander mode (3rd Over Tone) -R1 Plastic Taping o330mm -A0 1500pcs. /Radial Taping H0=18mm -A1 1000pcs. /Radial Taping H0=18mm eStructure/Size Code Structure/Size Lp Lead Type Cp Chip Type yPackaging Packaging Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, two-digit alphanumerics indicating "Individual Specification" is added between "tProduct Specification" and "yPackaging". p is expressed "A" or subsequent code, which indicates the structure/size. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". CERAFILr for TV/VCR (Part Number) SF S RA 4M50 CF 00 -B0 q w e r t y u qProduct ID tProduct Specification Code (1) Product ID SF Ceramic Filters wOscillation/Numbers of Element Product Specification Code (1) AF Standard Bandwidth Type BF Tight Bandwidth Type CF Standard Bandwidth Type Code Oscillation/Numbers of Element DF Broad Bandwidth Type S 2 Elements Thickness Shear mode EF Ultra-broad Bandwidth Type T 3 Elements Thickness Expander mode The code AF is only applied to SFT series. yProduct Specification Code (2) eStructure/Size Code Structure/Size Code Product Specification Code (2) Rp Lead Type 00 Standard Type Kp Chip Type p is expressed "A" or subsequent code, which indicates the structure/size. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". 2 Code uPackaging Code Packaging -B0 Bulk -A0 Radial Taping H0=18mm -R1 Plastic Taping o=330mm Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, two-digit alphanumerics indicating "Individual Specification" is added between "yProduct Specification Code (2)" and "uPackaging". P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr for AM (Part Number) PF W LF 450K P2A -B0 q w e r t y tProduct Specification qProduct ID Product ID PF Ceramic Filters SF Ceramic Filters CF Ceramic Filters Code Product Specification P2A Standard Type ppA indicates standard type. yPackaging wOscillation/Numbers of Element Packaging Code Code Oscillation/Numbers of Element -B0 Bulk S 1 Element Length mode -R0 Plastic Taping (o180mm) W 2 Elements Length mode -R1 Plastic Taping (o330mm) U 1 Element Area Expansion mode -A0 Radial Taping H0=18mm Z 2 Elements Area Expansion mode -M0 Magazine Cassette P 4 Elements Area Expansion mode eStructure/Size Code Structure/Size Lp Lead Type Cp Chip Type Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, three-digit alphanumerics indicating "Individual Specification" is added between "tProduct Specification" and "yPackaging". p is "A" or subsequent code, which indicates the structure/size. It varies depending on vibration mode and number of elements. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Capital letter "K" following three figures expresses the unit of "kHz". CERAFILr for Search-stop Signal Detection (Part Number) BF U LA q w e 450K C -B0 r t y qProduct ID tProduct Specification Product ID BF Resonator Code Product Specification Cp Bandwidth With standard type, p is omitted. wOscillation/Numbers of Element Code Oscillation/Numbers of Element U 1 Element Area Expansion mode eStructure/Size Code Structure/Size LA Lead Type Standard yPackaging Code Packaging -B0 Bulk Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, "Individual Specification (serial number)" and "Lead Shape (Lead Bend : B)" are added between "tProduct Specification" and "yPackage Specification Code" upon specification. rNominal Center Frequency Code Nominal Center Frequency 450K 450kHz 3 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Traps (Part Number) TP S RA 4M50 q w e r B 00 -B0 t y u qProduct ID tProduct Specification Code (1) Product ID TP Ceramic Traps Code Product Specification (1) B Broad-bandwidth Type C Low-capacitance Type wFunction yProduct Specification Code (2) Code Function S Single Traps Code Product Specification Code (2) T Triple Traps 00 Standard Type W Double Traps uPackaging eStructure/Size Code Packaging Code Structure/Size -B0 Bulk Rp Lead Type -A0 Radial Taping H0=18mm Kp Chip Type -R1 Plastic Taping o=330mm p is expressed "A" or subsequent code, which indicates the structure/size. Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, three-digit alphanumerics indicating "Individual Specification" is added between "yProduct Specification Code (2)" and "uPackaging". rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". Discriminators for FM (Part Number) CD A LF 10M7 GA 001 -B0 q w e r t y u qProduct ID tProduct Specification Product ID CD Discriminators Code Product Specification GA Two-digit alphanumerics express type, center frequency, rank, others wOscillation Oscillation A Thickness Expander mode Code IC S Thickness Shear mode 001 Applicable IC Control Code eStructure/Size uPackaging Code Structure/Size Code Packaging Lp Lead Type -B0 Bulk Cp Chip Type -A0 Radial Taping H0=18mm -R0 Plastic Taping o=180mm -R1 Plastic Taping o=330mm p is expressed "A" or subsequent code, which indicates the structure/size. rNominal Center Frequency Expressed by four-digit alphanumerics . The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". 4 yIC Code Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, an alphanumerics indicating "Individual Specification" is added between "yIC" and "uPackaging". P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Discriminators for TV/VCR (Part Number) CD S RF 4M50 q w e r E K t y 048 -A0 u i yProduct Specification Code (2) qProduct ID Product ID CD Discriminators wOscillation Code Product Specification Code (2) K Specification uIC Code Oscillation Code IC S Thickness Shear mode 048 Applicable IC control code eStructure/Size iPackaging Code Structure/Size Code Rp Lead Type -B0 Bulk -A0 Radial Taping H0=18mm p is expressed "A" or subsequent code, which indicates the structure/size. Packaging With non-standard products, a letter Indicating "Individual Specification" is added between "uIC" and "iPackaging". rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". tProduct Specification Code (1) Code Product Specification Code (1) C Three-terminals E Two-terminals 5 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. 1 CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Small Chip Type SFECF Series 1.30.1 SFECF10M7 series for FM-receivers are small, high performance and super thin (1.4mm max.) filters. Piezoelectric element is connected in the sandwich shape by ceramics substrate. They have 1.4mm max. thickness and small mounting area. (3.45x3.1mm) SFECF series and CDSCB series (MHz Discriminator) enable customers to make VICS/RKE/TPMS set so thin and small sized. 3.10.2 3.450.2 Inputelectrode marker 0 to 0.4 (0.6) (0.6) (0.6) 0 to 0.4 (1.28)(1.28) 0.3 min. 0.3 min. (1) (6) (2) (3) (5) (4) (1.28)(1.28) 0 to 0.35 Features 0.750.3 0.850.3 0.850.3 0.650.3 0.70.3 0.650.3 (1) : (2)(5) : (3)(4) : (6) : : ( ): Input Ground No connect Output EIAJ Monthly Code Reference 0 to 0.35 (in mm) 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.4mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling flexible PCB design. 3. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 4. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Center Nominal Center 3dB Bandwidth Attenuation Frequency (fo) Frequency (fn) (kHz) (kHz) (MHz) (MHz) Part Number Insertion Loss (dB) Ripple (dB) Spurious Input/Output Attenuation Impedance (dB) (ohm) SFECF10M7HA00-R0 10.700 30kHz - 180 40kHz 470 max. 4.0 2.0dB 1.0 max. 30 min. 330 SFECF10M7GA00-R0 10.700 30kHz - 230 50kHz 510 max. 3.5 2.0dB 1.0 max. 30 min. 330 SFECF10M7FA00-R0 10.700 30kHz - 280 50kHz 590 max. 3.0 2.0dB 1.0 max. 30 min. 330 SFECF10M7EA00-R0 10.700 30kHz - 330 50kHz 700 max. 3.0 2.0dB 1.0 max. 30 min. 330 SFECF10M7DF00-R0 - 10.700 fn150 min. 990 max. 6.0 max. [at fn] 3.0 max. 20 min. 330 Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A, B, C, D, E M Combination A, B, C Continued on the following page. 6 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit 1 (5) (4) 1.05 (6) 0.1 0.3 0.1 Standard Land Pattern Dimensions (3) (4) (2) (5) 1.40 0.3 R1 (1) 0.1 0.3 (3) 1.05 (2) 0.1 E1 (1) (6) Rg C2 R2 E2 RF Voltmeter S.S.G. 0.1 0.1 0.8 0.6 0.8 0.6 0.8 (1) : Input (2)(5) : Ground (3)(4) : No connect (6) : Output It shows solder resist land pattern. Rg = 50 R1 = 280 5% R2 = 330 5% C2 = 10 2 pF (Including stray capacitance and Input capacitance of RF Volt Meter) E1 : S.S.G. Output Voltage (in mm) (1) : Input (2)(5) : Ground (3)(4) : No connect (6) : Output Frequency Characteristics 7.0 1 6.0 1 6.0 2 5.0 2 5.0 3 4.0 3 4.0 4 3.0 4 3.0 5 2.0 5 2.0 6 1.0 6 1.0 10.500 10.700 Frequency (MHz) 10.900 7 0.0 11.100 10.300 10.700 Frequency (MHz) 10.900 0.0 11.100 SFECF10M7EA00-R0 7.0 0 7.0 1 6.0 1 6.0 2 5.0 2 5.0 3 4.0 3 4.0 4 3.0 4 3.0 5 2.0 5 2.0 6 1.0 6 1.0 7 10.300 10.500 10.700 Frequency (MHz) 10.900 Attenuation (dB) 0 G.D.T. (sec.) Attenuation (dB) SFECF10M7FA00-R0 10.500 7 0.0 11.100 10.300 10.500 10.700 Frequency (MHz) 10.900 G.D.T. (sec.) 7 10.300 Attenuation (dB) 0 G.D.T. (sec.) SFECF10M7GA00-R0 7.0 G.D.T. (sec.) Attenuation (dB) SFECF10M7HA00-R0 0 0.0 11.100 7.0 1 6.0 2 5.0 3 4.0 4 3.0 5 2.0 6 1.0 7 10.300 10.500 10.700 Frequency (MHz) 10.900 G.D.T. (sec.) Attenuation (dB) SFECF10M7DF00-R0 0 0.0 11.100 7 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) SFECF10M7GA00-R0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFECF10M7HA00-R0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.700 12.700 SFECF10M7DF00-R0 0 10 20 30 40 50 60 70 8.700 8 9.700 10.700 Frequency (MHz) 11.700 11.700 12.700 40 50 9.700 10.700 Frequency (MHz) 30 50 70 8.700 9.700 SFECF10M7EA00-R0 0 Attenuation (dB) Attenuation (dB) SFECF10M7FA00-R0 Attenuation (dB) 1 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment 2 CERAFILr 10.7MHz Ultra Thin Chip Type SFECD Series 1.0 max. 3.450.2 3.10.2 SFECD10M7 series for FM-receivers are small, high performance and ultra thin (1.0mm max.) filters. Piezoelectric element is connected in the sandwich shape by very thin ceramics substrate. They have 1.0mm max. thickness and small mounting area. (3.45x3.1mm) SFECD series enable customers to make RF modules so thin and small sized. 0 to 0.4 (0.6) (0.6) (0.6) 0 to 0.4 (1.28)(1.28) Features (1) (6) (2) (3) (5) (4) (1.28)(1.28) 0 to 0.35 0.750.3 0.850.3 0.850.3 0.650.3 0.550.3 0.650.3 0 to 0.35 (1) : (2)(5) : (3)(4) : (6) : : : : ( 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.0mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling flexible PCB design. 3. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Input Ground No Connect Output Marking EIAJ Monthly Code Center Frequency Rank Code ) : Reference (in mm) Applications 1. Card type radios 2. Card type RKE modules 3. Card type PHS modules Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Ripple (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFECD10M7FA00-R0 10.700 30kHz 280 50kHz 590 max. 3.0 2.0dB 1.0 max. 30 min. 330 Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A, B, C, D, E M Combination A, B, C Continued on the following page. 9 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Standard Land Pattern Dimensions 0.1 2 Test Circuit (5) (4) 1.05 (6) 0.1 0.3 (3) (4) (2) (5) R1 1.40 0.3 (1) 0.1 E1 (3) 0.1 0.1 0.8 0.5 0.8 0.5 0.8 R2 C2 E2 S.S.G. 1.05 (2) 0.1 0.3 (1) (6) Rg (1) : Input (2)(5) : Ground (3)(4) : Float (Signal Line) (6) : Output It shows solder resist land pattern. (in mm) Frequency Characteristics RF Voltmeter R1+Rg=R2=3305%, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage (1) : Input (2)(5) : Ground (3)(4) : Float (6) : Output Frequency Characteristics (Spurious) SFECD10M7FA00-R0 SFECD10M7FA00-R0 0 7 1 6 0 5 3 4 4 3 5 2 6 1 7 10.300 10 10.500 10.700 Frequency (MHz) 10.900 0 11.100 20 Attenuation (dB) 2 G.D.T. (sec.) Attenuation (dB) 10 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Chip Type SFECV Series 3 6.90.3 4.050.4 SFECV10M7 series for FM-receivers are monolithic type ceramic filters which utilize the thickness expander mode of the piezoelectric ceramic. SFECV series and PFWCC (kHz filter for AM receiver) enable customers to make AM/FM set so thin, and it can be of help to the total chip circuit. 2.90.3 1.20.5 1.20.3 (2) (1) 1.50.2 Features 1. Piezoelectric element is connected in the sandwich shape by heat resistant substrate, thus it has excellent mechanical strength, and it is suitable for automatic mounting. 2. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 1.50.2 * * * (3) 1.20.5 : Marking 1.00.5 1.00.5 1.00.5 (1) : Input (2) : Ground (3) : Output ** : EIAJ Monthly Code ** : Center Frequency Rank Code (in mm) Applications 1. Small, thin radios 2. Automotive radios 3. Headphone stereos Part Number Center Frequency (fo) (MHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFECV15M0EQ0001-R0 SFECV10M7KA00-R0 750 max. 7.0 max. 30 min. 330 320 max. 6.0 2.0dB 35 min. 330 150 40kHz 380 max. 5.5 2.0dB 35 min. 330 10.700 30kHz 180 40kHz 470 max. 4.0 2.0dB 35 min. 330 10.700 30kHz 230 50kHz 510 max. 3.5 2.0dB 35 min. 330 SFECV10M7FA00-R0 10.700 30kHz 280 50kHz 590 max. 3.0 2.0dB 35 min. 330 SFECV10M7CQ0C01-R0 10.700 40kHz 500 40kHz 950 max. 2.0 +2.0/-1.0dB 20 min. 470 SFECV10M7DF0021-R0 - fn175 min. 950 max. 3.0 2.0dB 20 min. 470 3dB Bandwidth (kHz) Attenuation (kHz) 15.000 50kHz 300 min. 10.700 30kHz 110 30kHz SFECV10M7JA00-R0 10.700 30kHz SFECV10M7HA00-R0 SFECV10M7GA00-R0 Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz], SFECV15M0EQ0001-R0: [within 14MHz to fo/fo to 16MHz], SFECV10M7CQ0C01-R0: [within 5MHz to 12MHz] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A, B, C, D, E M Combination A, B, C Continued on the following page. 11 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Standard Land Pattern Dimensions 1.2 1.2 1.2 4.0 3 1.65 1.65 2.85 2.85 Land (in mm) Test Circuit SFECV10M7_A00-R0 SFECV10M7CQ0C01-R0 SFECV10M7DF0021-R0 R1 R1 (3) (1) (2) Rg E1 R2 C2 E2 S.S.G. =-10dBm E1 R2 C2 E2 RF Voltmeter S.S.G. Rg = 50 R1 = 280 5% R2 = 330 5% C2 = 10 2 pF (Including stray capacitance and Input capacitance of RF Volt Meter) E1 : S.S.G. Output Voltage (1) : Input (2) : Ground (3) : Output SFECV15M0EQ0001-R0 R1 (3) (1) (2) Rg E1 R2 C2 E2 S.S.G. =-10dBm Rg = 50 R1 = 280 5% R2 = 330 5% C2 = 10 2 pF (Including stray capacitance and Input capacitance of RF Volt Meter) E1 : S.S.G. Output Voltage 12 (2) Rg RF Voltmeter (3) (1) RF Voltmeter (1) : Input (2) : Ground (3) : Output Rg = 50 R1 = 420 5% R2 = 470 5% C2 = 10 2 pF (Including stray capacitance and Input capacitance of RF Volt Meter) E1 : S.S.G. Output Voltage (1) : Input (2) : Ground (3) : Output P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics SFECV10M7JA00-R0 8.0 1 6.5 1 7.5 2 6.0 2 7.0 3 5.5 3 6.5 4 5.0 4 6.0 5 4.5 5 5.5 6 4.0 6 5.0 10.700 Frequency (MHz) 10.900 7 3.5 11.100 10.300 10.500 4.5 11.100 SFECV10M7GA00-R0 0 5.5 1 5.5 1 5.0 2 5.0 2 4.5 3 4.5 3 4.0 4 4.0 4 3.5 5 3.5 5 3.0 6 3.0 6 2.5 7 10.500 10.700 Frequency (MHz) 10.900 Attenuation (dB) 6.0 10.300 7 2.5 11.100 10.300 10.500 SFECV10M7FA00-R0 10.700 Frequency (MHz) 10.900 2.0 11.100 SFECV10M7DF0021-R0 5.0 0 8.0 1 4.5 1 7.0 2 4.0 2 6.0 3 3.5 3 5.0 4 3.0 4 4.0 5 2.5 5 3.0 6 2.0 6 2.0 7 10.300 10.500 10.700 Frequency (MHz) 10.900 Attenuation (dB) 0 G.D.T. (sec.) Attenuation (dB) 10.900 0 G.D.T. (sec.) Attenuation (dB) SFECV10M7HA00-R0 10.700 Frequency (MHz) 7 1.5 11.100 10.300 10.500 SFECV10M7CQ0C01-R0 1 10.700 Frequency (MHz) 10.900 1.0 11.100 SFECV15M0EQ0001-R0 7.0 0 G.D.T. (sec.) 10.500 G.D.T. (sec.) 7 10.300 3 G.D.T. (sec.) 0 Attenuation (dB) 7.0 G.D.T. (sec.) Attenuation (dB) SFECV10M7KA00-R0 0 6.0 0 10.0 2 8.0 4 6.0 6 4.0 8 2.0 4 3.0 G.D.T. (sec.) 4.0 Attenuation (dB) 5.0 3 G.D.T. (sec.) Attenuation (dB) 2 5 2.0 6 7 10.300 10.500 10.700 Frequency (MHz) 10.900 1.0 11.100 10 14.700 14.800 14.900 15.000 15.100 Frequency (MHz) 15.200 0.0 15.300 13 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) SFECV10M7KA00-R0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) 3 SFECV10M7JA00-R0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.700 70 8.700 12.700 SFECV10M7FA00-R0 9.700 10.700 Frequency (MHz) 11.700 12.700 SFECV10M7DF0021-R0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) 12.700 40 50 9.700 11.700 30 50 70 8.700 10.700 Frequency (MHz) SFECV10M7GA00-R0 0 Attenuation (dB) Attenuation (dB) SFECV10M7HA00-R0 9.700 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 SFECV10M7CQ0C01-R0 9.700 10.700 Frequency (MHz) 11.700 12.700 SFECV15M0EQ0001-R0 0 0 10 10 20 Attenuation (dB) Attenuation (dB) 20 30 40 30 40 50 50 60 60 70 70 8.700 14 9.700 10.700 Frequency (MHz) 11.700 12.700 80 13.000 14.000 15.000 Frequency (MHz) 16.000 17.000 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Standard Lead Type 4 7.02.0 SFELF10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CODE Features 7.02.0 MARKING 0.50.1 2.50.2 2.50.2 3.01.0 SFELF10M7HA00-B0 0.30.1 (3) (1) : Input (2) : Ground (3) : Output (in mm) (1) (2) 7.02.0 MARKING EIAJ CODE 7.02.0 1. These miniature filters have high mechanical strength. 2. Low loss, favorable waveform symmetry, and high selectivity 3. Various band widths are available for applications in wide to narrow bands. 4. Small dispersion and stable characteristics 5. Change in center frequency is typically within +-30ppm/(degree C) at -20 to +80 (degree C). 6. High reliability 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 0.50.1 3.01.0 SFELF10M7GA00-B0 0.30.1 2.50.2 2.50.2 (3) (1) : Input (2) : Ground (3) : Output (in mm) (1) (2) 7.02.0 EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 3.01.0 SFELF10M7FA00-B0 0.30.1 2.50.2 2.50.2 (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFELF10M7HA00-B0 10.700 30kHz 180 40kHz 520 max. 7.0 max. 40 min. 330 SFELF10M7GA00-B0 10.700 30kHz 230 50kHz 570 max. 4.0 2.0dB 40 min. 330 SFELF10M7FA00-B0 10.700 30kHz 280 50kHz 650 max. 4.0 2.0dB 30 min. 330 Part Number Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 15 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code 4 CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C Test Circuit (1) R1 (2) (3) RF Rg C R2 Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 6.0 1 6.0 1 5.5 2 5.5 2 5.0 3 5.0 3 4.5 4 4.5 4 4.0 5 4.0 5 3.5 6 3.5 6 3.0 7 10.500 10.600 10.700 Frequency (MHz) 10.800 7 3.0 10.900 10.500 5.5 1 5.0 2 4.5 3 4.0 4 3.5 5 3.0 6 2.5 7 10.500 16 10.600 10.700 Frequency (MHz) 10.800 2.0 10.900 G.D.T. (sec.) Attenuation (dB) SFELF10M7FA00-B0 0 Attenuation (dB) 0 10.600 10.700 Frequency (MHz) 10.800 2.5 10.900 G.D.T. (sec.) SFELF10M7GA00-B0 6.5 G.D.T. (sec.) Attenuation (dB) SFELF10M7HA00-B0 0 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) SFELF10M7GA00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELF10M7HA00-B0 0 30 40 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 4 30 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELF10M7FA00-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 17 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Low Loss Type 7.02.0 SFELF10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CODE 7.02.0 MARKING Features 1. Insertion loss is 1 to 1.5dB lower than conventional products. These types are useful for elevating the sensitivity of sets. 2. Small dispersion and stable characteristics 3. Excellent shape factor of frequency response 4. Good waveform symmetry 5.01.0 1.380.2 1.70.1 0.50.1 3.01.0 SFELF10M7JAA0-B0 0.30.1 2.50.2 2.50.2 (3) (1) : Input (2) : Ground (3) : Output (in mm) (1) (2) 7.02.0 EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 3.01.0 (3) MARKING MARKING 7.02.0 7.02.0 EIAJ CODE 0.50.1 3.01.0 SFELF10M7GAA0-B0 2.50.2 2.50.2 (3) (2) (1) : Input (2) : Ground (3) : Output SFELF10M7FAA0-B0 0.30.1 2.50.2 2.50.2 3.01.0 0.50.1 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 (in mm) (1) (2) 7.02.0 EIAJ CODE (1) : Input (2) : Ground (3) : Output 7.02.0 SFELF10M7HAA0-B0 0.30.1 2.50.2 2.50.2 0.30.1 5 (in mm) (1) (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFELF10M7JAA0-B0 10.700 30kHz 150 40kHz 360 max. 4.5 2.0dB 35 min. 330 SFELF10M7HAA0-B0 10.700 30kHz 180 40kHz 470 max. 3.5 1.5dB 35 min. 330 SFELF10M7GAA0-B0 10.700 30kHz 230 50kHz 520 max. 3.0 2.0dB 35 min. 330 SFELF10M7FAA0-B0 10.700 30kHz 280 50kHz 590 max. 2.5 2.0dB 30 min. 330 Part Number Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 18 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C 5 Test Circuit (1) R1 (2) (3) RF Rg C R2 Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 6.5 1 6.5 1 6.0 2 6.0 2 5.5 3 5.5 3 5.0 4 5.0 4 4.5 5 4.5 5 4.0 6 4.0 6 3.5 10.600 10.700 Frequency (MHz) 10.800 7 3.5 10.900 10.500 10.700 Frequency (MHz) 10.800 3.0 10.900 SFELF10M7FAA0-B0 6.0 0 5.5 1 5.5 1 5.0 2 5.0 2 4.5 3 4.5 3 4.0 4 4.0 4 3.5 5 3.5 5 3.0 6 3.0 6 2.5 7 10.500 10.600 10.700 Frequency (MHz) 10.800 2.5 10.900 Attenuation (dB) 0 G.D.T. (sec.) Attenuation (dB) SFELF10M7GAA0-B0 10.600 7 10.500 10.600 10.700 Frequency (MHz) 10.800 G.D.T. (sec.) 7 10.500 Attenuation (dB) 0 G.D.T. (sec.) SFELF10M7HAA0-B0 7.0 G.D.T. (sec.) Attenuation (dB) SFELF10M7JAA0-B0 0 2.0 10.900 19 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) 5 SFELF10M7HAA0-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELF10M7JAA0-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 20 10.700 Frequency (MHz) 11.700 12.700 40 50 9.700 11.700 30 50 70 8.700 10.700 Frequency (MHz) SFELF10M7FAA0-B0 0 Attenuation (dB) Attenuation (dB) SFELF10M7GAA0-B0 9.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Low Profile Type SFELG10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. MARKING 5.01.0 0.50.1 1. Installed height is 6.0mm, making it well suited for compact, thin sets. 2. Environmental reliability is the same as those of the ceramic filter SFELF10M7 series. 3.01.0 SFELG10M7KA00-B0 0.30.1 2.50.2 2.50.2 (1) in mm (3) EIAJ CODE MARKING 0.50.1 0.50.1 3.01.0 SFELG10M7HA00-B0 in mm (3) (1) MARKING in mm (3) 7.52.0 EIAJ CODE 6.0 max. 7.52.0 (2) (1) : Input (2) : Ground (3) : Output MARKING 0.50.1 (1) (2) (1) : Input (2) : Ground (3) : Output SFELG10M7FA00-B0 0.30.1 2.50.2 2.50.2 3.01.0 0.30.1 2.50.2 2.50.2 3.01.0 0.50.1 5.01.0 1.50.1 1.30.1 5.01.0 1.50.1 1.30.1 EIAJ CODE 6.0 max. (2) (1) : Input (2) : Ground (3) : Output 0.30.1 2.50.2 2.50.2 3.01.0 0.30.1 2.50.2 2.50.2 (1) 5.01.0 1.50.1 1.30.1 5.01.0 1.50.1 1.30.1 EIAJ CODE 6.0 max. MARKING (2) (1) : Input (2) : Ground (3) : Output 7.52.0 6.0 max. 7.52.0 SFELG10M7GA00-B0 6 1.50.1 1.30.1 Features SFELG10M7JA00-B0 EIAJ CODE 6.0 max. 7.52.0 in mm (3) (1) (2) (1) : Input (2) : Ground (3) : Output in mm (3) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFELG10M7KA00-B0 10.700 30kHz 110 30kHz 350 max. 7.0 2.0dB 30 min. 330 SFELG10M7JA00-B0 10.700 30kHz 150 40kHz 360 max. 4.5 2.0dB 35 min. 330 SFELG10M7HA00-B0 10.700 30kHz 180 40kHz 470 max. 3.5 2.0dB 35 min. 330 SFELG10M7GA00-B0 10.700 30kHz 230 50kHz 570 max. 3.0 2.0dB 40 min. 330 SFELG10M7FA00-B0 10.700 30kHz 280 50kHz 650 max. 3.0 2.0dB 30 min. 330 Part Number Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 21 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code 6 CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C Test Circuit (1) R1 (2) (3) RF Rg C R2 Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 7.5 1 7.5 1 7.0 2 7.0 2 6.5 3 6.5 3 6.0 4 6.0 4 5.5 5 5.5 5 5.0 6 5.0 6 4.5 10.600 10.700 Frequency (MHz) 10.800 4.5 10.900 7 10.500 10.700 Frequency (MHz) 10.800 4.0 10.900 SFELG10M7GA00-B0 6.5 0 6.0 1 6.0 1 5.5 2 5.5 2 5.0 3 5.0 3 4.5 4 4.5 4 4.0 5 4.0 5 3.5 6 3.5 6 3.0 7 10.500 10.600 10.700 Frequency (MHz) 10.800 3.0 10.900 Attenuation (dB) 0 G.D.T. (sec.) Attenuation (dB) SFELG10M7HA00-B0 10.600 7 10.500 10.600 10.700 Frequency (MHz) 10.800 G.D.T. (sec.) 7 10.500 Attenuation (dB) 0 G.D.T. (sec.) SFELG10M7JA00-B0 8.0 G.D.T. (sec.) Attenuation (dB) SFELG10M7KA00-B0 0 2.5 10.900 Continued on the following page. 22 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics 5.5 1 5.0 2 4.5 3 4.0 4 3.5 5 3.,0 6 2.5 7 10.500 10.600 10.700 Frequency (MHz) 10.800 G.D.T. (sec.) Attenuation (dB) SFELG10M7FA00-B0 0 6 2.0 10.900 Frequency Characteristics (Spurious) SFELG10M7JA00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELG10M7KA00-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.700 12.700 40 50 9.700 11.700 30 50 70 8.700 10.700 Frequency (MHz) SFELG10M7GA00-B0 0 Attenuation (dB) Attenuation (dB) SFELG10M7HA00-B0 9.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELG10M7FA00-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 23 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Low Spurious Response Type 7.52.0 SFELF10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. 7.02.0 EIAJ CODE These types have lower spurious response compared to the standard filters. 5.01.0 1.380.2 1.70.1 Features 0.50.1 3.01.0 (3) 7.52.0 MARKING MARKING 7.02.0 7.52.0 EIAJ CODE EIAJ CODE 5.01.0 0.50.1 (1) (2) 3.01.0 (3) (in mm) (1) (2) 7.52.0 7.52.0 MARKING MARKING EIAJ CODE 7.02.0 (3) SFELF10M7HAB0-B0 0.30.1 2.50.2 2.50.2 3.01.0 0.30.1 2.50.2 2.50.2 EIAJ CODE 0.50.1 3.01.0 2.50.2 2.50.2 (3) (2) (1) SFELF10M7FAB0-B0 0.30.1 2.50.2 2.50.2 3.01.0 0.50.1 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 (in mm) 7.02.0 0.50.1 SFELF10M7GAB0-B0 (in mm) 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 SFELF10M7JAB0-B0 (1) (2) 7.02.0 SFELF10M7KAB0-B0 0.30.1 2.50.2 2.50.2 0.30.1 7 MARKING (3) (in mm) (2) (1) (in mm) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFELF10M7KAB0-B0 10.700 30kHz 110 30kHz 350 max. 7.0 2.0dB 45/30 min. 330 SFELF10M7JAB0-B0 10.700 30kHz 150 40kHz 380 max. 5.5 2.0dB 45 min. 330 SFELF10M7HAB0-B0 10.700 30kHz 180 40kHz 520 max. 5.0 2.0dB 45 min. 330 SFELF10M7GAB0-B0 10.700 30kHz 230 50kHz 570 max. 3.0 2.0dB 45 min. 330 SFELF10M7FAB0-B0 10.700 30kHz 280 50kHz 650 max. 3.0 2.0dB 45 min. 330 Part Number Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz], SFELF10M7KAB0-B0: [within 9MHz to fo/fo to 12MHz] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 24 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C Test Circuit 7 (1) R1 (2) (3) RF Rg C R2 Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 7.0 1 7.5 1 6.5 2 7.0 2 6.0 3 6.5 3 5.5 4 6.0 4 5.0 5 5.5 5 4.5 6 5.0 6 4.0 10.600 10.700 Frequency (MHz) 10.800 4.5 10.900 7 10.500 10.700 Frequency (MHz) 10.800 3.5 10.900 SFELF10M7GAB0-B0 6.5 0 6.0 1 6.0 1 5.5 2 5.5 2 5.0 3 5.0 3 4.5 4 4.5 4 4.0 5 4.0 5 3.5 6 3.5 6 3.0 7 10.500 10.600 10.700 Frequency (MHz) 10.800 3.0 10.900 Attenuation (dB) 0 G.D.T. (sec.) Attenuation (dB) SFELF10M7HAB0-B0 10.600 7 10.500 10.600 10.700 Frequency (MHz) 10.800 G.D.T. (sec.) 7 10.500 Attenuation (dB) 0 G.D.T. (sec.) SFELF10M7JAB0-B0 8.0 G.D.T. (sec.) Attenuation (dB) SFELF10M7KAB0-B0 0 2.5 10.900 Continued on the following page. 25 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics 7 5.5 1 5.0 2 4.5 3 4.0 4 3.5 5 3.0 6 2.5 7 10.500 10.600 10.700 Frequency (MHz) 10.800 G.D.T. (sec.) Attenuation (dB) SFELF10M7FAB0-B0 0 2.0 10.900 Frequency Characteristics (Spurious) SFELF10M7JAB0-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELF10M7KAB0-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.700 12.700 SFELF10M7FAB0-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 26 9.700 10.700 Frequency (MHz) 11.700 11.700 12.700 40 50 9.700 10.700 Frequency (MHz) 30 50 70 8.700 9.700 SFELF10M7GAB0-B0 0 Attenuation (dB) Attenuation (dB) SFELF10M7HAB0-B0 8.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Wide Bandwidth Type 7.02.0 SFELF10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CODE Features 7.02.0 MARKING 1.380.2 1.70.1 8 5.01.0 Realizes widerband characteristics not obtained by conventional ceramic filters. 0.50.1 3.01.0 SFELF10M7EA00-B0 0.30.1 2.50.2 2.50.2 (3) (1) : Input (2) : Ground (3) : Output (in mm) (1) (2) 7.02.0 EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 3.01.0 SFELF10M7DF00-B0 0.30.1 2.50.2 2.50.2 (3) Center Frequency (fo) (MHz) Part Number (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFELF10M7EA00-B0 10.700 30kHz - 330 50kHz 680 max. 4.0 2.0dB 30 min. 330 SFELF10M7DF00-B0 - 10.700 fn175 min. 950 max. 3.0 2.0dB 20 min. 470 Area of Attenuation: [within 20dB] Area of Spurious Attenuation: SFELF10M7EA00-B0: [within 8MHz to 12MHz], SFELF10M7DF00-B0: [within 5MHz to 15MHz] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code (SFELF10M7EA00-B0) CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C 27 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Test Circuit (1) R1 (2) (3) RF Rg C R2 Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) 8 (1) : Input (2) : Ground (3) : Output Frequency Characteristics 4.5 1 4.0 1 4.0 2 3.5 2 3.5 3 3.0 3 3.0 4 2.5 4 2.5 5 2.0 5 2.0 6 1.5 6 1.5 7 10.300 10.500 10.700 Frequency (MHz) 10.900 Attenuation (dB) 0 7 1.0 11.100 10.300 10.500 10.700 Frequency (MHz) 10.900 1.0 11.100 Frequency Characteristics (Spurious) 10 10 20 20 30 40 30 40 50 50 60 60 70 8.700 28 SFELF10M7DF00-B0 0 Attenuation (dB) Attenuation (dB) SFELF10M7EA00-B0 0 9.700 10.700 Frequency (MHz) 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 G.D.T. (sec.) SFELF10M7DF00-B0 4.5 G.D.T. (sec.) Attenuation (dB) SFELF10M7EA00-B0 0 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Narrow Bandwidth Type 7.0 2.0 Features 7.0 2.0 MARKING SFELF10M7LFTA/KAH0, SFVLF/SFKLF series realizes narrower band characteristics not obtained by conventional ceramic filters. Besides, low spurious and temperature characteristics is stable. This series suits for European car-audio or AM up conversion use that needs narrow band characteristics. EIAJ CO DE 5.0 1.0 1 .65 0. 1 1 .40 .1 0. 50 .1 9 3.0 1.0 0.30 .1 2.50.2 2.50.2 SFVLF10M7MF00-B0 (3) (2) (1 ) (in mm) 10.02.0 7.0 2.0 7.0 2.0 EIAJ CODE 1. 650.1 1.380.2 1.70.1 5.0 1.0 1. 40. 1 0. 50. 1 5.01.0 EI AJ CODE 10.02.0 MARKING MARKING 0.50.1 (1 ) 2.50.2 2.50.2 +1.5 3.5 -1.0 (in mm) (3) 7.02.0 MARKING MARKING EIAJ CODE 0.50.1 0.50.1 SFELF10M7KAH0-B0 3.01.0 3.01.0 (2) (1) : Input (2) : Ground (3) : Output 0.30.1 2.50.2 2.50.2 0.30.1 2.50.2 2.50.2 (3) 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 (in mm) (1) (2) 7.02.0 EIAJ CODE (1) : Input (2) : Ground (3) : Output 7.02.0 (2) SFKLF10M7NL00-B0 7.02.0 (3) (1) : Input (2) : Ground (3) : Output 0.30.1 3.0 1.0 0.30. 1 2.50.2 2.50.2 SFVLF10M7LF00-B0 SFELF10M7LFTA-B0 (1) : Input (2) : Ground (3) : Output (in mm) (1) (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Center Frequency (fo) (MHz) Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) - 10.700 fn13 min. 135 max. 5.0 2.0dB 35 min. 330 SFVLF10M7LF00-B0 - 10.700 fn25 min. - 5.5 2.5dB 30 min. 330 SFKLF10M7NL00-B0 10.700 15kHz - 20 min. 95 max. 6.0 max. 24 min. 600 SFELF10M7LFTA-B0 - 10.700 fn25 min. 280 max. 7.0 2.0dB 30 min. 330 SFELF10M7KAH0-B0 10.700 30kHz - 110 30kHz 350 max. 7.0 2.0dB 30 min. 330 Part Number SFVLF10M7MF00-B0 Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz], SFKLF10M7NL00-B0: [within fo-1.0MHz to fo+1.0MHz] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 29 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code (SFELF10M7KAH0-B0) CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C Test Circuit 9 (1) R1 (2) (3) RF Rg Voltmeter C R2 S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 15.0 1 18.0 1 14.0 2 17.0 2 13.0 3 16.0 3 12.0 4 15.0 4 11.0 5 14.0 5 10.0 6 13.0 6 9.0 10.650 10.700 Frequency (MHz) 10.750 7 12.0 10.800 10.600 10.700 Frequency (MHz) 10.750 8.0 10.800 SFELF10M7LFTA-B0 0 0 12.0 1 1 11.0 2 2 10.0 3 9.0 4 8.0 5 5 7.0 6 6 6.0 Attenuation (dB) Attenuation (dB) SFKLF10M7NL00-B0 10.650 3 4 7 10.600 7 10.650 10.700 Frequency (MHz) 10.750 10.800 10.600 10.650 10.700 Frequency (MHz) 10.750 G.D.T. (sec.) 7 10.600 Attenuation (dB) 0 G.D.T. (sec.) SFVLF10M7LF00-B0 19.0 G.D.T. (sec.) Attenuation (dB) SFVLF10M7MF00-B0 0 5.0 10.800 Continued on the following page. 30 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics 8.0 1 7.5 2 7.0 3 6.5 4 6.0 5 5.5 6 5.0 7 10.600 10.650 10.700 Frequency (MHz) 10.750 G.D.T. (sec.) Attenuation (dB) SFELF10M7KAH0-B0 0 4.5 10.800 9 Frequency Characteristics (Spurious) SFVLF10M7LF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFVLF10M7MF00-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 10.700 Frequency (MHz) 11.700 12.700 SFELF10M7LFTA-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFKLF10M7NL00-B0 9.700 30 40 50 30 40 50 60 60 70 9.700 10.200 10.700 11.200 11.700 Frequency (MHz) 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELF10M7KAH0-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 31 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz for FM-IF Tuners 9.0 max. SFELF10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CO DE 2.50.2 2.50.2 (3) (2 ) 10. 0 ma x. EIAJ CO DE 5.0 1.0 1. 38 0.2 1. 70 .1 0.5 0. 1 (2 ) ( 1) (in mm) 9.0 max. 11 .0 max. 7.02.0 MARKING EIAJ CODE EIAJ CO DE 5.01.0 0.5 0. 1 (1) : Input (2) : Ground (3) : Output SFELF10M7GAXX-B0 2.50.2 2.50.2 (in mm) (3) (1) (2) (2) (in mm) 1.380.2 1.70.1 0.50.1 2.50.2 2.50.2 (1) : Input (2) : Ground (3) : Output (in mm) SFELF10M7GALP03-B0 0.30.1 2.50.2 2.50.2 4.0 max. (1 ) 5.01.0 0. 50.1 7.02.0 EIAJ CODE 5 .0 1.0 1. 380. 2 1.70. 1 MARKING 3.01.0 EI AJ CODE 11.0 m ax. MARKING (2 ) (1 ) 7.02.0 9. 0 ma x. (3) (1) : Input (2) : Ground (3) : Output 4.0 max. 3.01.0 0.30.1 2.50.2 2.50.2 0. 30 .1 0.50.1 5. 01 .0 1. 38 0.2 1. 70 .1 1.380.2 1.70.1 (3) (1) : Input (2) : Ground (3) : Output 4.0 max. SFELF10M7HAXD-B0 2.50.2 2.50.2 MARKING 0.3 0.1 (in mm) MARKING 7.02.0 SFELF10M7GAXA-B0 (1) 9.0 max. (3) SFELF10M7HA0G-B0 (1) : Input (2) : Ground (3) : Output 4.0 max. SFELF10M7JAXE-B0 0.3 0.1 0.5 0. 1 0.3 0.1 1. Little dispersion of amplitude characteristics and phase characteristics (G. D. T. characteristics) 2. The SFELF_X series has GDT characteristics and is useful for obtaining low distortion. SFELF_L series, in these ceramic filters, being in harmony with flatness of GDT, roundness of the amplitude and selectivity characteristics, therefore, these ceramic filters are suitable to high-grade stereo tuners. Even in mismatching conditions, they can keep little distortion because of low Qm of ceramic material. The SFELF_G series is based on SFELF_FA00/GA00/HA00, and it obtains high selectivity with low loss. There is little dispersion of amplitude and GDT characteristics, and low distortion rate can be obtained. 3. All products are inspected the flatness of GDT characteristics. 5.0 1.0 1. 38 0.2 1. 70 .1 Features 10 10. 0 ma x. MARKING (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Continued on the following page. 32 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. 7.02.0 MARKING MARKING EIAJ CODE 7.02.0 7.02.0 EIAJ CODE 0.50.1 0.50.1 (in mm) (1) (2) (3) MARKING MARKING 7.02.0 7.02.0 EIAJ CODE 10 0.50.1 SFELF10M7FA0G-B0 (in mm) (1) Center 3dB Bandwidth Frequency (fo) (kHz) (MHz) 3.01.0 3.01.0 (2) (1) : Input (2) : Ground (3) : Output 0.30.1 2.50.2 2.50.2 0.30.1 2.50.2 2.50.2 (3) 5.01.0 0.50.1 Part Number (in mm) 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 (1) : Input (2) : Ground (3) : Output (1) (2) 7.02.0 EIAJ CODE SFELF10M7FALL-B0 3.01.0 SFELF10M7GA0G-B0 7.02.0 3.01.0 (3) (1) : Input (2) : Ground (3) : Output 0.30.1 2.50.2 2.50.2 0.30.1 2.50.2 2.50.2 SFELF10M7GALM-B0 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 7.02.0 Continued from the preceding page. (3) Insertion Spurious Loss Attenuation (dB) (dB) Attenuation (kHz) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) GDT Bandwidth (kHz) Input/Output Impedance (ohm) SFELF10M7JAXE-B0 10.700 30kHz 150 30kHz 500 max. 14.0 max. 35 min. fo50 min.[within 0.15sec.] 330 SFELF10M7HAXD-B0 10.700 30kHz 180 30kHz 530 max. 14.0 max. 33 min. fo60 min.[within 0.15sec.] 330 SFELF10M7HA0G-B0 10.700 30kHz 180 40kHz 520 max. 7.0 max. 40 min. fo45 min.[within 0.5sec.] 330 SFELF10M7GAXX-B0 10.700 30kHz 250 40kHz 670 max. 12.0 max. 25 min. fo110 min.[within 0.2sec.] 330 SFELF10M7GAXA-B0 10.700 30kHz 220 40kHz 610 max. 12.5 max. 30 min. fo80 min.[within 0.15sec.] 330 SFELF10M7GALP03-B0 10.700 30kHz 250 50kHz 650 max. 10.0 max. 30 min. fo65 min.[within 0.25sec.] 330 SFELF10M7GALM-B0 10.700 30kHz 230 50kHz 600 max. 9.0 2.0dB 30 min. fo60 min.[within 0.25sec.] 330 SFELF10M7GA0G-B0 10.700 30kHz 230 50kHz 600 max. 7.0 max. 40 min. fo60 min.[within 0.5sec.] 330 SFELF10M7FALL-B0 10.700 30kHz 280 50kHz 700 max. 7.0 2.0dB 25 min. fo70 min.[within 0.25sec.] 330 SFELF10M7FA0G-B0 10.700 30kHz 280 50kHz 650 max. 4.0 2.0dB 30 min. fo85 min.[within 0.5sec.] 330 Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz], SFELF10M7GAXA-B0: [within 8MHz to 12MHz] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C Continued on the following page. 33 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit R1 (1) (2) (3) RF Rg R2 C Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Frequency Characteristics 0 4.50 1 4.75 1 4.25 2 4.50 2 4.00 3 4.25 3 3.75 4 4.00 4 3.50 5 3.75 5 3.25 6 3.50 6 3.00 10.600 10.700 10.800 Frequency (MHz) 10.900 3.25 11.000 7 10.400 10.500 10.700 10.800 Frequency (MHz) 10.900 2.75 11.000 SFELF10M7GAXX-B0 6.5 0 3.25 1 6.0 1 3.00 2 5.5 2 2.75 3 5.0 3 2.50 4 4.5 4 2.25 5 4.0 5 2.00 6 3.5 6 1.75 7 10.400 10.500 10.600 10.700 10.800 Frequency (MHz) 10.900 Attenuation (dB) 0 G.D.T. (sec.) Attenuation (dB) SFELF10M7HA0G-B0 10.600 3.0 11.000 7 10.400 10.500 SFELF10M7GAXA-B0 10.600 10.700 10.800 Frequency (MHz) 10.900 1.50 11.000 SFELF10M7GALP03-B0 0 3.75 1 3.50 1 3.50 2 3.25 2 3.25 3 3.00 3 3.00 4 2.75 4 2.75 5 2.50 5 2.50 6 2.25 6 2.25 10.500 10.600 10.700 10.800 Frequency (MHz) 10.900 2.00 11.000 Attenuation (dB) 3.75 G.D.T. (sec.) 0 7 10.400 G.D.T. (sec.) 10.500 7 10.400 10.500 10.600 10.700 10.800 Frequency (MHz) 10.900 G.D.T. (sec.) 7 10.400 Attenuation (dB) 5.00 G.D.T. (sec.) SFELF10M7HAXD-B0 0 G.D.T. (sec.) Attenuation (dB) SFELF10M7JAXE-B0 Attenuation (dB) 10 (1) : Input (2) : Ground (3) : Output 2.00 11.000 Continued on the following page. 34 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics 6.0 1 3.75 1 5.5 2 3.50 2 5.0 3 3.25 3 4.5 4 3.00 4 4.0 5 2.75 5 3.5 6 2.50 6 3.0 7 10.400 10.500 10.600 10.700 10.800 Frequency (MHz) 10.900 Attenuation (dB) 0 7 2.25 11.000 10.400 10.500 10.600 10.700 10.800 Frequency (MHz) 10.900 G.D.T. (sec.) SFELF10M7GA0G-B0 4.00 G.D.T. (sec.) Attenuation (dB) SFELF10M7GALM-B0 0 2.5 11.000 10 3.25 0 5.5 1 3.00 1 5.0 2 2.75 2 4.5 3 2.50 3 4.0 4 2.25 4 3.5 5 2.00 5 3.0 6 1.75 6 2.5 7 10.400 10.500 10.600 10.700 10.800 Frequency (MHz) 10.900 1.50 11.000 Attenuation (dB) 0 7 10.400 10.500 10.600 10.700 10.800 Frequency (MHz) 10.900 G.D.T. (sec.) SFELF10M7FA0G-B0 G.D.T. (sec.) Attenuation (dB) SFELF10M7FALL-B0 2.0 11.000 Frequency Characteristics (Spurious) SFELF10M7HAXD-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELF10M7JAXE-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.700 12.700 40 50 9.700 11.700 30 50 70 8.700 10.700 Frequency (MHz) SFELF10M7GAXX-B0 0 Attenuation (dB) Attenuation (dB) SFELF10M7HA0G-B0 9.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 Continued on the following page. 35 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) SFELF10M7GALP03-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELF10M7GAXA-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 10 SFELF10M7GA0G-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELF10M7GALM-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 36 10.700 Frequency (MHz) 12.700 40 50 9.700 11.700 30 50 70 8.700 10.700 Frequency (MHz) SFELF10M7FA0G-B0 0 Attenuation (dB) Attenuation (dB) SFELF10M7FALL-B0 9.700 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz High Selectivity Type SFTLF Series 10.01.0 SFTLF10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CODE 6.01.0 MARKING 0.40.1 Features 1.40.1 0.50.1 2.50.2 2.50.2 (1) : Input (2) : Ground (3) : Output 3.01.0 SFTLF10M7HA00-B0 0.30.1 (3) (2) (in mm) (1) 10.01.0 MARKING EIAJ CODE 6.01.0 1. It has an excellent shape factor, and it is possible to obtain 1.5 times more excellent selectivity than SFELF10M7 series (by detuning +-300 or 400kHz). 2. Good performance of spurious suppression 3. Having the same terminal pitch as the SFELF10M7 series, it easily replaces that series. 4. By replacing two SFELF10M7 series filters with one SFTLF10M7 filter, more compact sets can be made. 5. Well-suited for 1-chip ICs 5.01.0 0.650.1 0.40.1 5.01.0 0.650.1 1.40.1 0.50.1 (1) : Input (2) : Ground (3) : Output 3.01.0 SFTLF10M7GA00-B0 0.30.1 2.50.2 2.50.2 (3) (2) (in mm) (1) 10.01.0 EIAJ CODE 6.01.0 MARKING 0.40.1 5.01.0 0.650.1 1.40.1 0.50.1 (1) : Input (2) : Ground (3) : Output 3.01.0 SFTLF10M7FA00-B0 0.30.1 2.50.2 2.50.2 (3) (2) (in mm) (1) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFTLF10M7HA00-B0 10.700 30kHz 180 40kHz 510 max. 5.5 2.5dB 50 min. 330 SFTLF10M7GA00-B0 10.700 30kHz 230 40kHz 650 max. 6.0 2.0dB 50 min. 330 SFTLF10M7FA00-B0 10.700 30kHz 280 50kHz 700 max. 6.0 2.0dB 50 min. 330 Part Number Area of Attenuation: [within 40dB] Area of Spurious Attenuation: [within 9MHz to 12MHz] Area of Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 37 11 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C Test Circuit (1) R1 (2) (3) RF Rg Voltmeter S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) (1) : Input (2) : Ground (3) : Output Frequency Characteristics 0 7.5 1 8.0 1 7.0 2 7.5 2 6.5 3 7.0 3 6.0 4 6.5 4 5.5 5 6.0 5 5.0 6 5.5 6 4.5 7 10.500 10.600 10.700 Frequency (MHz) 10.800 7 5.0 10.900 10.500 7.0 1 6.5 2 6.0 3 5.5 4 5.0 5 4.5 6 4.0 7 10.500 38 10.600 10.700 Frequency (MHz) 10.800 3.5 10.900 G.D.T. (sec.) SFTLF10M7FA00-B0 0 Attenuation (dB) 8.5 10.600 10.700 Frequency (MHz) 10.800 4.0 10.900 G.D.T. (sec.) SFTLF10M7GA00-B0 0 G.D.T. (sec.) Attenuation (dB) SFTLF10M7HA00-B0 Attenuation (dB) 11 C R2 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) SFTLF10M7GA00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFTLF10M7HA00-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFTLF10M7FA00-B0 11 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 39 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr 10.7MHz Related Data on Lead Type Temperature Characteristics Variation (kHz) W20 SFELF10M7HA00-B0 Center frequency 0 Y20 W2 W1 Y20 0 W20 W40 Temperature (C) W60 W80 Variation (dB) Y40 Insertion loss 0 Y1 Y2 W40 W20 Y20 0 W20 W40 Temperature (C) W60 W80 Variation (kHz) Variation (kHz) Variation (dB) Variation (kHz) SFELF10M7GA00-B0 W40 3dB Bandwidth 0 Y20 Y40 Y20 0 W20 W40 Temperature (C) W60 W80 W40 W20 Center frequency 0 Y20 Y40 W2 W1 Y20 0 W20 W40 Temperature (C) W60 W80 0 W20 W40 Temperature (C) W60 W80 0 W20 W40 Temperature (C) W60 W80 Insertion loss 0 Y1 Y2 W40 W20 Y20 3dB Bandwidth 0 Y20 Y40 Y20 11 Matching Conditions *When using ceramic filters, it is most important to match the input/output load to impedance 330 ohm (SFELF10M7DF00-B0 is 470 ohm and SFKLF10M7NL00-B0 is 600 ohm matching). Waveform symmetry is damaged when reactance is added to the input/output load. *Two ceramic filters directly connected can be used for high selectivity. For reducing waveform variation, it is recommended to input a buffer AMP between ceramic filters. *The SFELF10M7 and SFTLF10M7 series are of input/output symmetric structure so that in theory there is no input/output directionality. Actual circuits may use different input/output loading conditions (for example, mismatched impedance) or capacitance load. In such cases, the waveform will be a little changed by the direction of the input/output of the ceramic filters. Loaded Resistance and Waveform (Rg+R1=330 ohm) Attenuation (dB) R2=560 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) R2=1k 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Group Delay Time (sec.) Attenuation (dB) 0 1 2 3 4 5 6 7 Group Delay Time (sec.) 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) R2=330 Attenuation (dB) 1.2 1.0 0.8 0.6 0.4 0.2 0 Group Delay Time (sec.) Attenuation (dB) 0 1 2 3 4 5 6 7 Group Delay Time (sec.) SFELF10M7GA00-B0 R2=220 Loaded Capacitance and Waveform (Rg+R1=R2=330 ohm) 40 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) C=82pF 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Group Delay Time (sec.) Attenuation (dB) 0 1 2 3 4 5 6 7 Group Delay Time (sec.) Attenuation (dB) C=56pF 0 1 2 3 4 5 6 7 C=33pF Attenuation (dB) 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Group Delay Time (sec.) Attenuation (dB) 1.2 1.0 0.8 0.6 0.4 0.2 0 Group Delay Time (sec.) SFELF10M7HA00-B0 C=10pF 0 1 2 3 4 5 6 7 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 4.5-6.5MHz Chip Type SFSKA Series SMD ceramic filter SFSKA_CF is a small and thin SMD filter sealed with a metal cap. Recommended for LCD-TVs, and small and thin tuners. 7.90.2 3.00.1 1.80.2 Features 0.50.1 8.50.2 1. High attenuation outside bandwidth 2. Small and thin package 3. Reflow-solderable 0.60.2 3.80.2 1.00.1 1.30.2 0.30.1 1.30.2 (1) (2) (3) (1) : Input (2) : Ground (3) : Output (in mm) 2.50.2 2.50.2 Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) 20dB Bandwidth (kHz) Insertion Loss (dB) Spurious Attenuation(1) (dB) Spurious Attenuation(2) (dB) Input/Output Impedance (ohm) SFSKA4M50CF00-R1 4.500 fn60 min. 600 max. 6.0 max. 20 min. [within 0 to fn] 15 min. [within fn to 7.0MHz] 1000 Area of Insertion Loss: at minimum loss point For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Land Pattern Dimensions 1.0 1.0 1.5 Test Circuit (1) (2) (3) 1.0 1.5 R1 4.8 Rg E1 R2 C2 E2 RF Voltmeter S.S.G. R1+Rg=R2=1000 5%, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1:S.S.G. Output voltage (in mm) Frequency Characteristics (Spurious) 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) Frequency Characteristics (1) : Input (2) : Ground (3) : Output 30 40 50 60 30 40 50 60 70 70 3.5 3.7 3.9 4.1 4.3 4.5 4.7 Frequency (MHz) 4.9 5.1 5.3 5.5 0.0 2.0 4.0 6.0 8.0 10.0 Frequency (MHz) 41 12 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 4.5-6.5MHz Standard Lead Type SFSRA Series 0.9 (Ref.) 2.50.2 2.50.2 4.0 max. 0.480.1 7.0 (Ref.) Features 13 1. Excellent spurious suppression characteristics within video signal band. 2. Available 4 pass bandwidth variation to meet various requests. 3. Low profile (H=7.0mm max.) 4. Lead dimension: Improved mounting reliability (cut & clinch) due to round terminal. 3.50.5 M 7.0 max. 10.0 max. As part of the environment protection activity, solder for terminal plating and terminal-element connection inside of ceramic filter SFSRA series contains no lead (Pb). This series also features thickness shear mode same as SFSRH series (current type), which provides very low spurious response within video signal band. (3) (2) (1) : Input (2) : Ground (3) : Output (1) (in mm) Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) 20dB Bandwidth (kHz) Insertion Loss (dB) Spurious Attenuation(1) (dB) Spurious Attenuation(2) (dB) Input/Output Impedance (ohm) SFSRA4M50BF00-B0 4.500 fn40 min. 420 max. 8.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.0MHz] 1000 SFSRA4M50CF00-B0 4.500 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.0MHz] 1000 SFSRA4M50DF00-B0 4.500 fn70 min. 750 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.0MHz] 1000 SFSRA4M50EF00-B0 4.500 fn125 min. 850 max. 6.0 max. 25 min. [within 0 to fn] 18 min. [within fn to 7.0MHz] 1000 SFSRA5M50BF00-B0 5.500 fn50 min. 400 max. 8.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.5MHz] 600 SFSRA5M50CF00-B0 5.500 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to7.5MHz] 600 SFSRA5M50DF00-B0 5.500 fn80 min. 750 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.5MHz] 600 SFSRA5M74BF00-B0 5.742 fn50 min. 400 max. 8.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.5MHz] 600 SFSRA5M74CF00-B0 5.742 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.5MHz] 600 SFSRA6M00BF00-B0 6.000 fn50 min. 420 max. 8.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 8.0MHz] 600 SFSRA6M00CF00-B0 6.000 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 8.0MHz] 470 SFSRA6M00DF00-B0 6.000 fn80 min. 750 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 8.0MHz] 470 SFSRA6M50BF00-B0 6.500 fn50 min. 470 max. 8.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 8.5MHz] 470 SFSRA6M50CF00-B0 6.500 fn70 min. 650 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 8.5MHz] 470 SFSRA6M50DF00-B0 6.500 fn80 min. 800 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 8.5MHz] 470 Area of Insertion Loss: at minimum loss point For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 42 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Test Circuit 1 2 3 R1 Rg S.S.G. R2 RF Voltmeter C Rg+R1=R2=Input and Output Impedance C=10pF (Including stray capacitance and input capacitance of RF voltmeter) (1) : Input (2) : Ground (3) : Output Frequency Characteristics SFSRA4M50CF00-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSRA4M50BF00-B0 30 40 40 50 50 60 60 70 3.5 3.7 3.9 4.1 4.3 4.5 4.7 Frequency (MHz) 4.9 5.1 5.3 70 3.5 5.5 13 30 3.7 3.9 0 10 10 20 20 30 40 60 60 3.9 4.1 4.3 4.5 4.7 Frequency (MHz) 4.9 5.1 5.3 70 3.5 5.5 3.7 3.9 0 0 10 10 20 20 30 40 60 60 5.1 5.3 5.5 5.7 Frequency (MHz) 54 4.3 4.5 4.7 Frequency (MHz) 4.9 5.1 5.3 5.5 5.9 6.1 6.3 6.5 40 50 4.9 5.5 30 50 4.7 5.3 SFSRA5M50CF00-B0 Attenuation (dB) Attenuation (dB) SFSRA5M50BF00-B0 70 4.5 5.1 40 50 3.7 4.9 30 50 70 3.5 4.3 4.5 4.7 Frequency (MHz) SFSRA4M50EF00-B0 0 Attenuation (dB) Attenuation (dB) SFSRA4M50DF00-B0 4.1 5.9 6.1 6.3 6.5 70 4.5 4.7 4.9 5.1 5.3 5.5 5.7 Frequency (MHz) Continued on the following page. 43 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics SFSRA5M50DF00-B0 SFSRA5M74BF00-B0 0 0 10 10 20 Attenuation (dB) Attenuation (dB) 20 30 40 40 50 50 60 60 70 4.5 30 70 4.7 4.9 5.1 5.3 5.5 5.7 Frequency (MHz) 5.9 6.1 6.3 6.5 4.7 4.9 5.1 SFSRA5M74CF00-B0 0 0 10 10 20 20 30 40 60 60 4.9 5.1 5.3 5.5 5.7 5.9 Frequency (MHz) 6.1 6.3 6.5 70 5.0 6.7 5.2 5.4 0 0 10 10 20 20 30 40 60 60 5.6 5.8 6.0 6.2 Frequency (MHz) 6.4 6.6 6.8 70 5.0 7.0 5.2 5.4 0 0 10 10 20 20 30 40 60 60 6.1 6.3 6.5 6.7 Frequency (MHz) 6.6 6.8 7.0 5.6 5.8 6.0 6.2 Frequency (MHz) 6.4 6.6 6.8 7.0 7.1 7.3 7.5 40 50 5.9 6.4 30 50 5.7 5.8 6.0 6.2 Frequency (MHz) SFSRA6M50CF00-B0 Attenuation (dB) Attenuation (dB) SFSRA6M50BF00-B0 70 5.5 5.6 40 50 5.4 6.7 30 50 5.2 6.5 SFSRA6M00DF00-B0 Attenuation (dB) Attenuation (dB) SFSRA6M00CF00-B0 70 5.0 6.3 40 50 4.7 6.1 30 50 70 5.5 5.7 5.9 Frequency (MHz) SFSRA6M00BF00-B0 Attenuation (dB) Attenuation (dB) 13 5.3 6.9 7.1 7.3 7.5 70 5.5 5.7 5.9 6.1 6.3 6.5 6.7 Frequency (MHz) 6.9 Continued on the following page. 44 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics SFSRA6M50DF00-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 5.5 5.7 5.9 6.1 6.3 6.5 6.7 Frequency (MHz) 6.9 7.1 7.3 7.5 Frequency Characteristics (Spurious) SFSRA4M50BF00-B0 SFSRA4M50CF00-B0 0 0 10 10 20 Attenuation (dB) Attenuation (dB) 20 30 40 40 50 50 60 60 70 0.0 13 30 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 SFSRA4M50DF00-B0 9.0 10.0 7.0 8.0 9.0 10.0 7.0 8.0 9.0 10.0 20 Attenuation (dB) Attenuation (dB) 8.0 10 20 30 40 30 40 50 50 60 60 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 SFSRA5M50BF00-B0 0 10 10 20 20 30 40 40 50 60 60 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 4.0 5.0 6.0 Frequency (MHz) 30 50 1.0 3.0 SFSRA5M50CF00-B0 0 Attenuation (dB) Attenuation (dB) 7.0 SFSRA4M50EF00-B0 10 70 0.0 4.0 5.0 6.0 Frequency (MHz) 0 0 70 0.0 3.0 7.0 8.0 9.0 10.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) Continued on the following page. 45 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) SFSRA5M74BF00-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSRA5M50DF00-B0 30 40 30 40 50 50 60 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 SFSRA5M74CF00-B0 0 0 10 10 20 20 30 40 50 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 10 10 20 20 30 40 7.0 8.0 9.0 10.0 40 50 60 60 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 4.0 5.0 6.0 Frequency (MHz) 30 50 1.0 3.0 SFSRA6M00DF00-B0 0 Attenuation (dB) Attenuation (dB) 10.0 60 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 SFSRA6M50BF00-B0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 SFSRA6M50CF00-B0 0 0 10 10 20 Attenuation (dB) 20 Attenuation (dB) 9.0 40 SFSRA6M00CF00-B0 30 40 30 40 50 50 60 60 70 0.0 8.0 30 0 70 0.0 7.0 50 60 70 0.0 4.0 5.0 6.0 Frequency (MHz) SFSRA6M00BF00-B0 Attenuation (dB) Attenuation (dB) 13 3.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 Continued on the following page. 46 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E1.pdf 05.3.30 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) SFSRA6M50DF00-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 13 47 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 3.5-6.5MHz for Chroma Signal SFSRA/F Series 2.50.2 2.50.2 4.0 max. 0.480.1 1. Frequency adjustment free 2. Responsible for VHS. 8mm VCR system 0.9 (Ref.) 7.0 (Ref.) Features SFSRA Series (3) (2) (1) : Input (2) : Ground (3) : Output (1) (in mm) Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) 20dB Bandwidth (kHz) Insertion Loss (dB) Spurious Attenuation(1) (dB) Spurious Attenuation(2) (dB) Input/Output Impedance (ohm) SFSRA4M43CF00-B0 4.430 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.0MHz] 1000 SFSRF3M58CF00-B0 3.580 fn40 min. 530 max. 6.0 max. 25 min. [within 0 to fn] 15 min. [within fn to 6.0MHz] 1000 Area of Insertion Loss: at minimum loss point For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit 1 2 3 R1 Rg S.S.G. R2 RF Voltmeter C Rg+R1=R2=Input and Output Impedance C=10pF (Including stray capacitance and input capacitance of RF voltmeter) (1) : Input (2) : Ground (3) : Output Frequency Characteristics Frequency Characteristics (Spurious) SFSRA4M43CF00-B0 SFSRA4M43CF00-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) 14 3.50.5 M 7.0 max. 10.0 max. Chroma signals frequency conversion process is involved in VCRs video signal processing circuit. These SFSRA/SFSRF series are suitable for B.P.F. 30 40 40 50 50 60 60 70 3.5 3.7 3.9 4.1 4.3 4.5 4.7 Frequency (MHz) 48 30 4.9 5.1 5.3 5.5 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz Chip Type PFWCC Series IN 5.00.3 OUT 5.70.3 GND (3) (1) (4) 1.50.2 1.00.2 Features 1.20.2 (2) 1.00.2 1.20.2 1.50.2 PFWCC series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability, and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. This is the most recommendable for portable radio with small package. Especially, reflowable with SMD package. Input Mark GND 4.00.2 (in mm) 1. Center frequency range between 450 and 470kHz are available standard tolerance of +-2kHz. 2. For frequency synthesizers, center frequencies of 450, 459 and 468kHz are available standard tolerance of +-1kHz. Part Number PFWCC450KS2A-R0 Center Frequency (fo) (kHz) 3dB Bandwidth (kHz) Selectivity (+) (dB) Selectivity (-) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element 450 2.0kHz 5.5 1.5kHz 17 min.[fo+9kHz] 17 min.[fo-9kHz] 6.0 max. 3000 2 Area of Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Land Pattern Dimensions 6.0 1.5 6.0 4.0 1.2 1.2 (in mm) The solder resist should be printed except for the land pattern on the P.C.B. The material of P.C.B. is the epoxy resin of glass fabric base (t=0.8mm) 49 15 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Recommended IFT PFWCC/PFSLF Type Item 5x5mm IFT 7x7mm IFT Winding Specification S(3) (1)--(2) (2)--(3) (4)--(6) (1)--(2) (2)--(3) (4)--(6) 85T 67T 23T 84T 98T 33T (4)S (2) (1) (6) (Bottom view) No load Qu 90 65 Tuning Capacitance 180pF 180pF * Maching of CERAFILr PF_ series with IFT is decided by the IFT secondary side impedance, |Z2|. Set the |Z2| at about 4.2k. Test Circuit (CERAFILr Only) Test Circuit (CERAFILr with IFT) 7pF (1) (2) IFT (4) (3) RF Voltmeter 3k S.S.G. (Rg=50) 300k (3) (1) RF Voltmeter (6) IFT+PFWCC450KS2A-R0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) IFT+PFWCC450KS2A-R0 30 40 30 40 50 50 60 60 70 70 440 450 Frequency (kHz) 50 (3) (4) Frequency Characteristics (Spurious) 0 430 (2) (2) S.S.G. (Rg=50) 15 Frequency Characteristics (1) (4) 3k 3k 460 470 0.000 1.000 2.000 Frequency (kHz) 3.000 4.000 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz Chip Type SFPKA Series 7.50.3 SFPKA series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. 8.4 max. 7.00.3 3.00.3 MARKING EIAJ CODE 5.0 max. 0.90.1 2.00.3 1.50.3 2.00.3 Features 1.60.3 Connection (1) : Input (2) : Ground (3) : Output (1) (2) (3) 1. The filters are mountable by automatic placers and can be reflow soldered and withstand washing. 2. The filters are wide bandwidth and high selectivity. So they are suitable for car radio and multi band radio. (in mm) Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) SFPKA450KH1A-R1 450 1.0kHz fn3.0 min. SFPKA450KG1A-R1 450 1.0kHz fn4.5 min. SFPKA450KF4A-R1 450 1.5kHz fn6.0 min. 40 min.[fn+12.5kHz] Part Number 1.50.3 Selectivity (-) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element 40 min.[fn+9kHz] 40 min.[fn-9kHz] 6.0 max. 2000 4 40 min.[fn+10kHz] 40 min.[fn-10kHz] 6.0 max. 1500 4 40 min.[fn-12.5kHz] 6.0 max. 1500 4 Selectivity (+) (dB) 16 Area of Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 6.95 2.0 1.1 0.925 2.0 2.0 0.9 1.55 7.45 1.6 2.475 0.8 Standard Land Pattern Dimensions (in mm) 51 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Recommended IFT Test Circuit Type SFPKA Item Winding Specification (1)--(2) (2)--(3) (4)--(6) R1 S(3) (4)S (2) (3) (1) (2) (1) (6) 60T 125T 28T RF Voltmeter Rg (Bottom view) R2 E1 E2 S.S.G. 0dBm No load Qu 40 Tuning Capacitance 180pF * Matching of CERAFILr SFPKA series with IFT is decided by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because a Qu value which is too high (e.g.,90) may produce ripple in the waveform. It is recommended to match the impedance of |Z2| with that of the CERAFILr. (1) : Input (2) : Ground (3) : Output Rg+R1=R2=Input/Output Impedance E1 : S.S.G. Output Voltage Frequency Characteristics 400 10 360 10 360 20 320 20 320 30 280 30 280 40 240 40 240 50 200 50 200 60 160 60 160 70 120 70 120 80 80 80 80 90 40 90 40 0 100 100 425 450 475 Frequency (kHz) 400 10 360 20 320 30 280 40 240 50 200 60 160 70 120 80 80 90 40 450 Frequency (kHz) 52 475 0 G.D.T. (sec.) Attenuation (dB) SFPKA450KF4A-R1 425 450 Frequency (kHz) 0 100 425 475 0 G.D.T. (sec.) 0 Attenuation (dB) 16 SFPKA450KG1A-R1 400 G.D.T. (sec.) Attenuation (dB) SFPKA450KH1A-R1 0 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz SFULA/SFZLA Series 3.50.3 7.00.3 SFULA/SFZLA series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability, and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. 9.00.3 MARKING +1.0 3.5 -0.5 EIAJ CODE 1.10.1 Features 0.25 0.80.1 1. Center frequency range between 450 to 470kHz are available standard tolerance of +-2kHz. 2. For frequency synthesizers, center frequencies of 450, 459 and 468kHz are available standard tolerance of +-1kHz. 0.1 (3) 1.750.5 SFULA Series Connection (1) : Input (2) : Ground (3) : Output (in mm) (2) (1) 2.50.2 2.50.2 7.00.5 7.00.3 EIAJ +1.0 3.5 -0.5 CODE 9.00.3 MARKING 1.10.1 0.25 0.1 SFZLA Series (1) (2) (3) (6) (5) (4) 2.50.2 2.50.2 3.5 1.75 0.5 0.5 0.80.1 Connection (1) : Input (2)(5) : Ground (3)(4) : Direct connection (6) : Output (in mm) Center Frequency (fo) (kHz) 3dB Bandwidth (kHz) Selectivity (+) (dB) Selectivity (-) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element SFULA455KU2A-B0 455 2.0kHz 10.0 3.0kHz 4 min.[fo+10kHz] 6 min.[fo-10kHz] 5.0 max. 3000 1 SFULA455KU2B-B0 462 2.0kHz 10.0 3.0kHz 4 min.[fo+10kHz] 6 min.[fo-10kHz] 5.0 max. 3000 1 SFZLA455KN2A-B0 455.5 2.0kHz 4.0 1.0kHz 23 min.[fo+9kHz] 23 min.[fo-9kHz] 7.0 max. 3000 2 SFZLA455KS2A-B0 456 2.0kHz 5.5 1.0kHz 18 min.[fo+9kHz] 18 min.[fo-9kHz] 7.0 max. 3000 2 SFZLA455KT2A-B0 456 2.0kHz 7.0 1.0kHz 16 min.[fo+9kHz] 16 min.[fo-9kHz] 6.0 max. 3000 2 Part Number Area of Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Frequency Characteristics (CERAFILr with IFT) Selectivity 6dB Band Width (kHz) +9kHz off (dB) IFT+SFULA455KU2B-B0 6.5 20 IFT+SFZLA455KN2A-B0 5.0 38 78 IFT+SFZLA455KS2A-B0 7.0 33 78 IFT+SFZLA455KT2A-B0 8.5 27 78 Part Number -9kHz off (dB) Input Level (at 0.6mV output) (dB) 23 78 Typ. value 53 17 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Recommended IFT SFZLApA SFULApB Type Item 7x7mm IFT Winding Specification S(3) (1)--(2) (2)--(3) (4)--(6) (1)--(2) (2)--(3) (4)--(6) 70T 115T 7T 68T 84T 14T (4)S (2) (1) (6) (Bottom view) No load Qu 105 90 Tuning Capacitance 180pF 180pF * Maching of CERAFILr SFULA/SFZLA series with IFT is decided by the IFT secondary side impedance, |Z2|. The design target values of |Z2| are : For SFULApB : 300 For SFZLApA : 1k Test Circuit (CERAFILr Only) SFULA Series 3k (1) SFZLA Series (3) 3k (2) RF Voltmeter (4) (2) (5) (1) (6) S.S.G. (Rg=50) 3k 3k S.S.G. (Rg=50) (3) RF Voltmeter 17 Test Circuit (CERAFILr with IFT) SFULA Series SFZLA Series 7pF 7pF (1) (6) (5) IFT (2) 300k RF Voltmeter S.S.G. (Rg=50) (3) (1) (6) (4) (2) (1) 3k (2) (1) 54 (4) 3k S.S.G. (Rg=50) (3) (4) (2) (3) IFT 300k (3) (6) RF Voltmeter P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics IFT+SFZLA455KN2A-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) IFT+SFULA455KU2B-B0 0 30 40 30 40 50 50 60 60 70 70 435 445 455 465 475 435 445 455 Frequency (kHz) IFT+SFZLA455KS2A-B0 475 465 475 IFT+SFZLA455KT2A-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) 465 Frequency (kHz) 30 40 30 40 50 50 60 60 70 70 435 445 455 465 475 435 445 455 Frequency (kHz) 17 Frequency (kHz) Frequency Characteristics (Spurious) IFT+SFZLA Series 0 10 10 20 20 30 30 Attennation (dB) Attennation (dB) IFT+SFULA455KU2B-B0 0 40 50 40 50 60 60 70 70 80 0 1 2 3 4 5 6 Frequency (MHz) 7 8 9 10 80 0 1 2 3 4 5 6 7 8 9 10 Frequency (MHz) 55 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz PFSLF/PFWLF Series PFSLF/PFWLF series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability, and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. This is the most recommendable for portable radios with small package. 5.01.0 6.01.0 5.01.0 1.40.1 1.40.1 0.50.1 3.01.0 0.30.1 PFSLF Series Marking : 2.50.2 2.50.2 Features (3) 1. Center frequency range between 450 to 470kHz are available standard tolerance of +-2kHz. 2. For frequency synthesizers, center frequencies of 450, 459 and 468kHz are available standard tolerance of +-1kHz. (2) (1) Input (2) Ground (3) Output : EIAJ Monthly Code (in mm) (1) 6.2 max. 6.01.0 5.01.0 1.40.1 1.40.1 PFWLF Series 18 (3) Center Frequency (fo) (kHz) 3dB Bandwidth (kHz) PFSLF455KP2A-B0 455 2.0kHz 4.5 1.5kHz PFWLF450KP2A-B0 450 2.0kHz 4.5 1.5kHz PFWLF450KS2A-B0 450 2.0kHz 5.5 1.5kHz 17 min.[fo+9kHz] Part Number (2) Marking : (1) Input (2) Ground (3) Output 2.50.2 2.50.2 3.01.0 0.30.1 0.50.1 : Vender's Code : EIAJ monthly Code (1) (in mm) Selectivity (-) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element 8 min.[fo+9kHz] 8 min.[fo-9kHz] 5.0 max. 3000 1 19 min.[fo+9kHz] 19 min.[fo-9kHz] 7.0 max. 3000 2 17 min.[fo-9kHz] 6.0 max. 3000 2 Selectivity (+) (dB) Area of Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 56 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Recommended IFT PFSLF455KP2A-B0 PFWCC/PFSLF Type Item 5x5mm IFT 7x7mm IFT Winding Specification S(3) (1)--(2) (2)--(3) (4)--(6) (1)--(2) (2)--(3) (4)--(6) 85T 67T 23T 84T 98T 33T (4)S (2) (1) (6) (Bottom view) No load Qu 90 65 Tuning Capacitance 180pF 180pF * Maching of CERAFILr PF_ series with IFT is decided by the IFT secondary side impedance, |Z2|. Set the |Z2| at about 4.2k. Test Circuit (CERAFILr Only) Test Circuit (CERAFILr with IFT) PFSLF/PFWLF Series PFSLF/PFWLF Series 7pF 3k (1) (3) (1) (3) IFT 300k (2) (4) (2) (3) (2) S.S.G. (Rg=50) 3k RF Voltmeter 3k S.S.G. (Rg=50) (1) RF Voltmeter (6) 18 Frequency Characteristics IFT+PFWLF450KS2A-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) IFT+PFSLF455KP2A-B0 0 30 40 30 40 50 50 60 60 70 70 435 445 455 465 475 430 440 Frequency (kHz) 450 460 470 3.000 4.000 Frequency (kHz) Frequency Characteristics (Spurious) IFT+PFWLF450KS2A-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) IFT+PFSLF455KP2A-B0 0 30 40 30 40 50 50 60 60 70 0.000 1.000 2.000 Frequency (kHz) 3.000 4.000 70 0.000 1.000 2.000 Frequency (kHz) 57 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz SFPLA/CFWLA Series 7.30.3 EIAJ CODE 2.70.3 (1) (3) SFPLA Series 0.60.1 1.20.5 Connection (1) : Input (2) : Ground (3) : Output 4.20.3 (2) 0.80.1 3.00.3 1.5 max. 0.150.05 0.30.1 SFPLA/CFWLA series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability, high attenuation, and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. This is the most recommendable for car-stereo and all band radio with high attenuation. 7.00.3 8.00.3 MARKING (in mm) 3.30.5 11.00.5 7.50.5 EIAJ CODE 3.50.5 0.15 2.90.3 0.80.1 (2) (1) (5) 4.30.3 1.350.5 2.30.5 19 (4) (3) 0.60.1 2.60.3 2.90.3 2.9-- 2.9 --0.3 1.20.5 CFWLA Series 1.5 max. 7.00.5 MARKING Connection (1) : Input (2)(3)(4) : Ground (5) : Output (in mm) 2.00.3 Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Selectivity (+) (dB) Selectivity (-) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element SFPLA450KJ1A-B0 450 1.0kHz fn2.0 min. 40 min.[fn+7.5kHz] 40 min.[fn-7.5kHz] 6.0 max. 2000 4 SFPLA450KH1A-B0 450 1.0kHz fn3.0 min. 40 min.[fn+9kHz] 40 min.[fn-9kHz] 6.0 max. 2000 4 CFWLA450KJFA-B0 450 (fn) fn2.0 min. 50 min.[fn+7.5kHz] 50 min.[fn-7.5kHz] 7.0 max. 2000 6 CFWLA450KHFA-B0 450 (fn) fn3.0 min. 50 min.[fn+9kHz] 50 min.[fn-9kHz] 6.0 max. 2000 6 Part Number Area of Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Recommended IFT Test Circuit SFPLA/CFULA/CFWLA Type Item 7x7mm IFT Winding Specification S(3) (1)--(2) (2)--(3) (4)--(6) 60T 125T 28T R1 (4)S Input Output Rg (2) (1) (6) RF R2 SSG (Bottom view) No load Qu 40 Tuning Capacitance 180pF * Matching of CERAFILr SFPLA/CFULA/CFWLA series with IFT is decided by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because a Qu value which is too high (e.g.,90) may produce ripple in the waveform. It is recommended to match the impedance of |Z2| with that of the CERAFILr. Voltmeter Ground Rg+R1 =R2 : Input/Output Impedance Continued on the following page. 58 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics IFT+CFWLA450KHFA-B0 0 10 10 20 20 Attennation (dB) Attenuation (dB) IFT+SFPLA450KH1A-B0 0 30 40 30 40 50 50 60 60 70 430 440 450 460 470 70 430 440 450 Frequency (kHz) Frequency (kHz) 460 470 Frequency Characteristics (Spurious) IFT+CFWLA450KHFA-B0 0 10 10 20 20 Attennation (dB) Attennation (dB) IFT+SFPLA450KH1A-B0 0 30 40 50 30 40 50 60 60 70 70 80 0 1 2 3 4 5 6 Frequency (kHz) 7 8 9 10 80 0 1 2 3 4 5 6 Frequency (kHz) 7 8 9 10 19 59 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz for AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series 2.70.3 (2) (1) (3) 3.00.3 Connection (1) : Input (2) : Ground (3) : Output (in mm) 8.00.3 MARKING MARKING 2.30.5 20 Part Number (1) 2.00.3 Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) 0.60.1 2.70.3 Connection (1) : Input (2)(3)(4) : Ground (5) : Output (2) CFULA Series (in mm) (1) (3) 3.00.3 0.80.1 1.20.5 0.60.1 4.20.3 (2) (5) 4.30.3 1.350.5 (4) (3) 1.5 max. 0.150.05 2.60.3 2.90.3 2.9-- 2.9 --0.3 1.20.5 CFWLA Series 1.5 max. 3.50.5 0.15 2.90.3 0.80.1 7.30.3 EIAJ CODE 7.50.5 EIAJ CODE 7.00.5 11.00.5 7.00.3 3.30.5 Connection (1) : Input (2) : Ground (3) : Output 3.30.5 Selectivity (+) (dB) Selectivity (-) (dB) Insertion Loss (dB) 30 min.[fn+9kHz] 30 min.[fn-9kHz] 0.30.1 SFPLA Series 0.60.1 1.20.5 4.20.3 0.150.05 0.80.1 0.30.1 7.30.3 EIAJ CODE 1.5 max. SFPLA/CFULA/CFWLA series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability, high attenuation, and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. Especially, CFULA/CFWLA_Y series is the frequency fidelity in the high sound area of an AM stereo will be improved with wide band, flat group delay time characteristics. 7.00.3 8.00.3 MARKING (in mm) GDT 20sec. Input/Output Bandwidth Impedance Element (kHz) (ohm) SFPLA450KG1A-B0 450 1.0kHz fn4.5 min. 6.0 max. - 2000 4 SFPLA450KF1A-B0 450 1.0kHz fn6.0 min. 40 min.[fn+12.5kHz] 40 min.[fn-12.5kHz] 6.0 max. - 2000 4 SFPLA450KE1A-B0 450 1.0kHz fn7.5 min. 40 min.[fn+15kHz] 40 min.[fn-15kHz] 6.0 max. - 1500 4 SFPLA450KD1A-B0 450 1.0kHz fn10.0 min. 40 min.[fn+20kHz] 40 min.[fn-20kHz] 4.0 max. - 1500 4 CFULA450KG1Y-B0 450 1.0kHz fn4.5 min. 40 min.[fn+15kHz] 40 min.[fn-15kHz] 10.0 max. fn3.0 2000 4 CFULA450KF1Y-B0 450 1.0kHz fn6.0 min. 40 min.[fn+17.5kHz] 40 min.[fn-17.5kHz] 9.0 max. fn4.0 2000 4 CFULA450KD1Y-B0 450 1.0kHz fn10.0 min. 40 min.[fn+25kHz] 40 min.[fn-25kHz] 7.0 max. fn7.0 1500 4 CFWLA450KG1Y-B0 450 1.0kHz fn4.5 min. 50 min.[fn+15kHz] 50 min.[fn-15kHz] 11.0 max. fn4.0 2000 6 fn6.0 min. 50 min.[fn+17.5kHz] 50 min.[fn-17.5kHz] 10.0 max. fn5.0 2000 6 CFWLA450KD1Y-B0 450 1.0kHz fn10.0 min. 50 min.[fn+25kHz] 50 min.[fn-25kHz] 8.0 max. fn8.0 1500 6 CFWLA450KGFA-B0 450 (fn) fn4.5 min. 50 min.[fn+10kHz] 50 min.[fn-10kHz] 6.0 max. - 2000 6 CFWLA450KFFA-B0 450 (fn) fn6.0 min. 50 min.[fn+12.5kHz] 50 min.[fn-12.5kHz] 6.0 max. - 2000 6 CFWLA450KEFA-B0 450 (fn) fn7.5 min. 50 min.[fn+15kHz] 50 min.[fn-15kHz] 6.0 max. - 1500 6 CFWLA450KDFA-B0 450 (fn) fn10.0 min. 50 min.[fn+20kHz] 50 min.[fn-20kHz] 4.0 max. - 1500 6 CFWLA450KF1Y-B0 450 1.0kHz Area of Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 60 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Recommended IFT Test Circuit SFPLA/CFULA/CFWLA Type Item 7x7mm IFT Winding Specification S(3) (1)--(2) (2)--(3) (4)--(6) 60T 125T 28T Input R1 (4)S Output Rg (2) (1) (6) RF R2 SSG (Bottom view) No load Qu 40 Tuning Capacitance 180pF Voltmeter Ground * Matching of CERAFILr SFPLA/CFULA/CFWLA series with IFT is decided by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because a Qu value which is too high (e.g.,90) may produce ripple in the waveform. It is recommended to match the impedance of |Z2| with that of the CERAFILr. Rg+R1 =R2 : Input/Output Impedance Frequency Characteristics IFT+CFWLA450KFFA-B0 0 10 10 20 20 Attennation (dB) Attenuation (dB) IFT+SFPLA450KF1A-B0 0 30 40 50 30 40 50 60 60 70 440 450 460 70 430 470 440 Frequency (kHz) 460 470 IFT+CFWLA450KF1Y-B0 10 10 20 200 30 100 40 0 50 60 Attennation (dB) 0 Group Delay Time (sec.) Attennation (dB) IFT+CFULA450KF1Y-B0 0 70 430 450 Frequency (kHz) 20 20 200 30 100 40 0 50 Group Delay Time (sec.) 430 60 440 450 Frequency (kHz) 460 470 70 430 440 450 460 470 Frequency (kHz) 61 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment 3.50.3 CERAFILr 455kHz for AM Search-stop Signal Detection BFULA series are narrow bandwidth filters. This filter is used in the application which detects the carrier peak with a narrow bandwidth amplifier, or an electronic tuner as a stop signal detector. 1.5 max. MARKING 9.00.3 7.00.3 EIAJ CODE 3.50.5 Features Most suitable for IC Station Detectors (SD) No directivity 1.750.5 0.10.05 0.250.05 0.80.1 1.10.1 5.00.2 (in mm) Resonant Frequency (Fr) (kHz) Delta F (Fa-Fr) (kHz) Resonant Resistance (ohm) Capacitance (pF) BFULA450KC-B0 450 1.0kHz 14.0 2.0kHz 20 max. 360 20% BFULA450KC004-B0 450 0.8kHz 9.0 2.0kHz 30 max. 360 20% BFULA450KK003-B0 450 1.0kHz 27.5 4.5kHz 30 max. 550 20% Part Number fa-fr: Difference between the anti-resonant frequency and the resonant frequency. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page." Impedance Characteristics BFULA450KC004-B0 500k 100k 21 50k 10k Impedance (ohm) 5k 1k 500 100 50 10 5 1 445 62 450 455 Frequency (kHz) 460 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr 455kHz SF/PF Series Temperature Characteristics SFPLA450KH1A-B0 +1 Temperature (D) 20 40 60 80 0 -20 0 -1 Center Frequency (kHz) Center Frequency (kHz) SFZLA455KS2A-B0 40 -20 60 80 Temperature (D) 0 -1 +1 Temperature (D) 20 40 60 80 0 -20 0 -1 Insertion Los (dB) 20 0 0 20 40 0 20 40 60 80 -1 0 60 80 Temperature (D) -20 -1 3dB Band Width (kHz) Insertion Los (dB) Temperature (D) -20 0 +1 +1 3dB Band Width (kHz) +1 +1 Temperature (D) 20 40 60 80 0 -20 0 -1 Insertion Los (dB) Center Frequency (kHz) PFWLF450KS2A-B0 +1 20 40 -20 80 0 Temperature (D) -1 +1 40 60 0 -20 0 80 20 Temperature (D) -1 3dB Band Width (kHz) 60 0 +1 -20 0 0 -1 20 40 60 80 Temperature (D) 21 63 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr 455kHz SF/PF/BF Series Application Circuit Car Radio SFPLA450KH1A-B0/BFULA450KC004-B0 10 220p 4.7 3k 2200p 22 33p 10 16 18 1 0.01 CF1 3 5 7 9 11 13 15 17 100k 100k 2SK315 PFWLF450KS2A-B0 CF1: PFWLF450KS1A-B0 SFZLA450KS1A-B0 SFPLA450KH1A-B0 19 1 10k 9 14 3.3 8 7 47 6 0.022 5 0.01 12 100 22 0.022 100k 51 0.047 x2 100H 3.3mH 4 0.022 0.022 + 0.022 3 10 PC1216V2 (NEC) 75 2 1 0.022 1 ANT 8 0.022 11 6 22 12 0.033 51p 13 LA1135(SANYO) 4 PFSLF455KP2A-B0 560p 14 0.033 0.01 3.3 15 100p 2 22 16 120 4.7H AF Out 4.7k 17 2.7k 3300p 100 82 7.5k 18 + 10k + 0.47 Ant Input 0.022 100 19 0.047 0.047 20 10k 4.7 430P Vtune 100k PFSLF455KP2A-B0/PFWLF450KS2A-B0 BFULA450KC004-B0 CF2 Vco(+8v) Station Det Out 100 Unit R: C:F L:H Det. Output Vcc (+13V) Unit R: C:F L:H Portable Radio SFULA455KU2B-B0 FM PF FM OSC FM CERAFIL(R) (SFELF10M7FA00-B0) + R IF OUT 9 FM BPF AM ANT 12 7 6 FM FRONT END 2 14 17 FM/AM BAND SELECT + FM IF IN FM DISCRI FM IF AMP DETECTOR 19 METER 25 26 RIPPLE FILTER TUNING METER 15 Vcc REGULATOR REG OUT + 28 13 1 CXA1019M (SONY) 10 AM FRONT END AM IF AMP DETECTOR 11 5 18 20 16 22 AM OSC + AF PRE/POWER AMP VOL AGC AMP AM IF IN 21 8 23 DEP OUT 21 4 24 AF IN 27 + SP 3 + + + AM CERAFIL(R) (SFULA455KU2B-B0) VOL Unit R: C:F L:H Continued on the following page. 64 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr 455kHz SF/PF/BF Series Application Circuit Continued from the preceding page. Portable Radio SFULA455KU2B-B0 23 22 DEF OUT 21 20 19 FM OSC AM OSC AF AM MIX AM RF 1 2 FM MIX 3 AM AGC AM MIX 4 AM AGC + 33 GND1 BPF 5 - MPX IN AM IF IN Phase COM Phase COM VCO FM IF IN FM IF 8 FM DET 9 GND2 TUN LED 10 TUN LED 14 OUT R L R 4.7 13 ST DECODER Freq Divider HYS TA8122AN (TOSHIBA) SW ST LED 11 12 ST LED QUAD 0.033 560 10 0.015 0.1 15 L DET 7 OUT L 16 T2 0.022 VCO 17 AM/FM MONO SW AM IF 6 Vcc2 LPF2 4.7 + + - - LPF1 18 PRE AM DET AM MIX FM RF FM RF IN AM OSC AM + SFULA455 SFELF10 KU2B-B0 M7FA00-B0 CDALF10 M7GA16-B0 + - 22 OUT Vcc1 24 FM OSC MO - + 560 AM PF IN FM PF + FM 0.015 10 15p ST 22k T1 CSBLA456 KE2ZF16-B0 0.1 100k 8p 0.022 33k 5p L2 22p L1 20p L3 100k 330p IS2236 Vcc (3V) Unit R: C:F L:H In Tr Circuit BFULA450KK003-B0 15k 3k +6V 0.01 21 0.01 1k 1mA S.S.G. (10mV) 5k 3k BFULA 450KK003-B0 RF Volt meter Unit R: C:F L:H 65 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series SMD ceramic trap TPSKA_B is small and thin SMD trap sealed with a metal cap. Recommended for LCD-TVs, and small and thin tuners. 7.90.2 3.00.1 1.80.2 Features 0.50.1 8.50.2 1. High attenuation and high performance group delay time 2. Small and thin package 3. Reflow-solderable 0.60.2 3.80.2 1.00.1 1.30.2 0.30.1 (1) : Input (2) : Ground (3) : Output 1.30.2 (1) (2) (3) (in mm) 2.50.2 2.50.2 Part Number Nominal Center Frequency (fn1) (MHz) Attenuation (at fn1) (dB) 30dB Attenuation BW (fn1) (kHz) 4.500 35 min. 50 min. TPSKA4M50B00-R1 For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Land Pattern Dimensions Test Circuit L 1.0 1.0 1.5 1.0 R1 1.5 Rg 4.8 50 R2 RF Voltmeter S.S.G. 22 Rg=50 R1=330 R2=1.0k L=15H (in mm) 0 0 700 10 10 600 20 30 40 50 60 20 500 30 400 40 300 50 200 60 100 70 0 80 70 4.0 4.1 4.2 4.3 4.4 4.5 4.6 Frequency (MHz) 66 4.7 4.8 4.9 5.0 0 1.0 2.0 3.0 Frequency (MHz) 4.0 5.0 G.D.T. (nsec) Frequency Characteristics (Spurious) Attenuation (dB) Attenuation (dB) Frequency Characteristics P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 4.5-6.5MHz Chip Type Double Traps TPWKA Series 7.90.2 4.20.1 1.50.2 M 0.40.1 SMD ceramic trap TPWKA is small and thin SMD trap sealed with a metal cap. Recommended for LCD-TVs, and small and thin tuners. This series consist of 2 wafers with 2 trap frequencies. Recommended for Multi standard set. 1.00.1 Features 1. Good performance of attenuation 2. Small and thin package 3. Reflow-solderable 5.00.2 1.30.2 8.50.2 0.40.2 (1) (2) (3) 2.50.2 2.50.2 1.30.2 0.30.1 (1) : Input or Output (2) : Ground (3) : Output or Input (in mm) Part Number Nominal Center Frequency (fn1) (MHz) Nominal Center Frequency (fn2) (MHz) Attenuation (at fn1) (dB) Attenuation (at fn2) (dB) 30dB Attenuation BW (fn1) (kHz) TPWKA5M50B04-R1 5.500 5.742 30 min. 30 min. 50 min. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Land Pattern Dimensions 1.2 1.2 1.2 L 1.3 R1 1.9 1.3 Test Circuit Rg R2 50 C2 RF Voltmeter 5.8 S.S.G. 1.9 L = 8.2 H Rg = 50 R1 = 150 R2 = 330 C2 = 10pF (Including stray capacitance and input capacitance of RF voltmeter) 23 (in mm) 0 0 10 10 800 20 600 30 400 40 200 50 50 0 60 60 20 30 40 70 4.5 70 4.7 4.9 5.1 5.3 5.5 5.7 Frequency (MHz) 5.9 6.1 6.3 6.5 0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 G.D.T. (nesc) Frequency Characteristics (Spurious) Attenuation (dB) Attenuation (dB) Frequency Characteristics 10.0 67 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 4.5-6.5MHz Standard Lead Type TPSRA Series M Features 1. Good performance of attenuation 2. Shape factor can be changed by the value of Inductor "L". 3. Three-terminals type. 4. Low profile (H=7.0mm max.) 5. Lead dimension: Improved mounting reliability (cut & clinch) due to round terminal. 0.9 (Ref.) 2.50.2 2.50.2 4.0 max. 0.480.1 7.0 (Ref.) 3.50.5 As part of the environment protection activity, solder for terminal plating and terminal-element connection inside of ceramic filter TPSRA series contain no lead (Pb). This series consist of two trap element on one wafer. Suitable for the sound IF trap of CTV/VCR. 7.0 max. 10.0 max. (3) (2) (1) Nominal Center Frequency (fn1) (MHz) Attenuation (at fn1) (dB) 30dB Attenuation BW (fn1) (kHz) TPSRA4M50B00-B0 4.500 35 min. 50 min. TPSRA4M50C00-B0 4.500 30 min. - TPSRA5M50B00-B0 5.500 35 min. 70 min. TPSRA5M74B00-B0 5.742 35 min. 70 min. TPSRA6M00B00-B0 6.000 35 min. 70 min. TPSRA6M50B00-B0 6.500 35 min. 70 min. Part Number (1) : Input (2) : Ground (3) : Output (in mm) For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit TPSRA4M50B00-B0 TPSRA4M50C00-B0 24 15H 8.2H 330ohm 220ohm Rg=50ohm S.S.G. 1kohm R.F. Voltmeter 50ohm 2.2Kohm S.S.G. 50ohm Rg=50ohm R.F. Voltmeter Continued on the following page. 68 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit TPSRA5M50/5M74/6M00/6M50B00-B0 15H 220ohm S.S.G. R.F. Voltmeter 1Kohm 50ohm Rg=50ohm Frequency Characteristics TPSRA4M50C00-B0 0 10 Attenuation (dB) 0 10 20 30 40 20 30 40 50 50 60 60 70 4.0 4.1 4.2 4.3 4.4 4.5 4.6 Frequency (MHz) 4.7 4.8 4.9 70 4.0 5.0 4.1 4.2 4.3 0 0 10 10 20 30 40 60 5.3 5.4 5.5 5.6 Frequency (MHz) 5.7 5.8 5.9 70 5.2 6.0 5.3 5.4 10 10 Attenuation (dB) 0 20 30 40 6.0 6.1 6.2 6.7 6.8 6.9 7.0 40 60 60 5.9 6.0 6.1 Frequency (MHz) 5.9 30 50 5.8 5.6 5.7 5.8 Frequency (MHz) 20 50 5.7 5.5 TPSRA6M50B00-B0 0 5.6 5.0 24 TPSRA6M00B00-B0 70 5.5 4.9 40 60 5.2 4.8 30 50 5.1 4.7 20 50 70 5.0 4.4 4.5 4.6 Frequency (MHz) TPSRA5M74B00-B0 Attenuation (dB) Attenuation (dB) TPSRA5M50B00-B0 Attenuation (dB) Attenuation (dB) TPSRA4M50B00-B0 6.2 6.3 6.4 6.5 70 6.0 6.1 6.2 6.3 6.4 6.5 6.6 Frequency (MHz) Continued on the following page. 69 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) TPSRA4M50B00-B0 TPSRA4M50C00-B0 600 30 400 40 200 50 0 60 800 20 600 30 400 40 200 50 0 60 0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 10.0 0 1.0 2.0 TPSRA5M50B00-B0 400 40 200 50 0 10.0 10 800 20 600 30 400 40 200 50 0 70 0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 0 1.0 2.0 TPSRA6M00B00-B0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 TPSRA6M50B00-B0 0 800 20 600 30 400 40 200 50 0 Attenuation (dB) 10 G.D.T. (nesc) 0 Attenuation (dB) 9.0 60 60 10 800 20 600 30 400 40 200 50 0 60 60 70 8.0 G.D.T. (nesc) 600 30 Attenuation (dB) 20 G.D.T. (nesc) Attenuation (dB) 800 70 7.0 0 0 24 4.0 5.0 6.0 Frequency (MHz) TPSRA5M74B00-B0 10 70 3.0 0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 70 0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 G.D.T. (nesc) 70 10 G.D.T. (nesc) 20 Attenuation (dB) 0 800 G.D.T. (nesc) Attenuation (dB) 0 10 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 3.5-6.5MHz Two Lead Type TPSRF_J Series 10.0 max. T J 10.0 max. Ceramic Trap TPSRF_J series are two-terminals type. Which are recommended for the attenuation of sound IF in B/W TV and the attenuation of chroma signal in Video Camcorder. EIAJ CODE 1. Small-size, lightweight 2. High performance, durability 3. Easy to design due to two-terminals type 5.01.0 1.380.2 Features 5.00.2 5.0 max. 0.30.1 0.50.1 Nominal Center Frequency (fn1) (MHz) Attenuation (at fn1) (dB) 30dB Attenuation BW (fn1) (kHz) TPSRF3M58J00-B0 3.580 20 min. 20 min.[20dB Att.BW] TPSRF4M43J00-B0 4.430 20 min. 40 min.[20dB Att.BW] TPSRF4M50J00-B0 4.500 20 min. 30 min.[20dB Att.BW] TPSRF5M50J00-B0 5.500 20 min. 30 min.[20dB Att.BW] TPSRF5M74J00-B0 5.742 20 min. 30 min.[20dB Att.BW] TPSRF6M00J00-B0 6.000 20 min. 40 min.[20dB Att.BW] TPSRF6M50J00-B0 6.500 20 min. 40 min.[20dB Att.BW] Part Number in mm For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit 75 S.S.G. 1K 50 Rg=50 Ceramic Trap R.F. Voltmeter 25 71 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics TPSRF4M43J00-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) TPSRF3M58J00-B0 30 40 30 40 50 50 60 60 70 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Frequency (MHz) 3.8 3.9 4.0 70 3.9 4.1 4.0 4.1 0 0 10 10 20 20 30 40 60 60 4.2 4.3 4.4 4.5 4.6 Frequency (MHz) 4.7 4.8 4.9 70 5.0 5.0 5.1 5.2 0 0 10 10 20 20 30 40 60 60 70 5.14 5.34 5.54 5.74 5.94 6.14 6.34 6.54 6.74 6.7 6.8 6.9 7.0 Frequency (MHz) TPSRF6M50J00-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 6.0 72 6.1 6.2 6.3 6.4 6.5 6.6 Frequency (MHz) 5.3 5.4 5.5 5.6 Frequency (MHz) 5.7 5.8 5.9 6.0 6.2 6.3 6.4 6.5 40 50 4.94 4.9 30 50 4.74 4.8 TPSRF6M00J00-B0 Attenuation (dB) Attenuation (dB) TPSRF5M74J00-B0 25 4.7 40 50 4.1 4.6 30 50 70 4.0 4.3 4.4 4.5 Frequency (MHz) TPSRF5M50J00-B0 Attenuation (dB) Attenuation (dB) TPSRF4M50J00-B0 4.2 70 5.5 5.6 5.7 5.8 5.9 6.0 6.1 Frequency (MHz) P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) TPSRF4M43J00-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) TPSRF3M58J00-B0 30 40 30 40 50 50 60 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 0 0 10 10 20 20 30 40 60 60 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 0 0 10 10 20 20 30 40 60 60 3.0 4.0 5.0 6.0 Frequency (MHz) 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 40 50 2.0 10.0 30 50 1.0 9.0 TPSRF6M00J00-B0 Attenuation (dB) Attenuation (dB) TPSRF5M74J00-B0 70 0 8.0 40 50 1.0 7.0 30 50 70 0.0 4.0 5.0 6.0 Frequency (MHz) TPSRF5M50J00-B0 Attenuation (dB) Attenuation (dB) TPSRF4M50J00-B0 3.0 7.0 8.0 9.0 10.0 7.0 8.0 9.0 10.0 70 0.0 25 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 TPSRF6M50J00-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 73 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 3.5-6.5MHz for 2ch Sound TV in Germany TPSRF_W Series 7.02.0 Ceramic trap TPSRF_W series has same structure as TPSRF_B series. But they can trap two individual frequencies at one time. Recommended for two channel multi-sound TV systems. 7.02.0 T EIAJ CODE Features 5.01.0 1.380.2 1.70.1 0.50.1 2.5 0.2 2.5 0.2 3.01.0 0.30.1 1. Space saving 2. Three-terminals type (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Part Number Nominal Center Frequency (fn1) (MHz) Nominal Center Frequency (fn2) (MHz) Attenuation (at fn1) (dB) Attenuation (at fn2) (dB) 30dB Attenuation BW (fn1) (kHz) TPSRF5M50W00-B0 5.500 5.742 32 min. 25 min. 70 min. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit 15H 330ohm 1kohm 50ohm Rg=50ohm R.F. Voltmeter S.S.G. Frequency Characteristics Frequency Characteristics (Spurious) 0 0 10 10 20 20 30 40 30 40 50 50 60 60 70 5.0 74 Attenuation (dB) Attenuation (dB) 26 5.1 5.2 5.3 5.4 5.5 5.6 Frequency (MHz) 5.7 5.8 5.9 6.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 3.5-6.5MHz Double Traps TPWRF Series 7.02.0 T W B 7.02.0 Ceramic trap TPWRF_B series consist of two wafers with two trap frequencies. Recommended for Dual standard sets. EIAJ CODE 1. Good performance of attenuation 2. Small and thin package 3. Three-terminals type 5.01.0 1.380.2 1.70.1 Features 2.50.2 2.50.2 3.51.0 0.30.1 0.50.1 (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Part Number Nominal Center Frequency (fn1) (MHz) Nominal Center Frequency (fn2) (MHz) Attenuation (at fn1) (dB) Attenuation (at fn2) (dB) 30dB Attenuation BW (fn1) (kHz) TPWRF4M50B05-B0 4.500 6.000 30 min. 30 min. 50 min. TPWRF4M50B06-B0 4.500 4.850 30 min. 30 min. 50 min. TPWRF4M50B10-B0 4.500 4.724 30 min. 30 min. 50 min. TPWRF4M50B11-B0 4.500 5.500 30 min. 30 min. 50 min. TPWRF5M50B02-B0 5.500 6.500 30 min. 30 min. 50 min. TPWRF5M50B03-B0 5.500 6.000 30 min. 30 min. 50 min. TPWRF5M50B04-B0 5.500 5.742 30 min. 30 min. 50 min. TPWRF5M50B07-B0 5.500 5.850 30 min. 30 min. 50 min. TPWRF6M00B01-B0 6.000 6.500 30 min. 30 min. 70 min. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit 8.2H 150ohm 330ohm S.S.G. 50ohm Rg=50ohm R.F. Voltmeter 27 75 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics TPWRF5M50B03-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) TPWRF5M50B02-B0 30 40 30 40 50 50 60 60 70 5.0 5.2 5.4 5.6 5.8 6.0 6.2 Frequency (MHz) 6.4 6.6 6.8 70 4.5 7.0 4.7 4.9 0 0 10 10 20 20 30 40 60 60 4.9 5.1 5.3 5.5 5.7 Frequency (MHz) 6.1 6.3 6.5 6.4 6.6 6.8 7.0 7.0 8.0 9.0 10.0 7.0 8.0 9.0 10.0 40 50 4.7 5.9 30 50 70 4.5 5.3 5.5 5.7 Frequency (MHz) TPWRF6M00B01-B0 Attenuation (dB) Attenuation (dB) TPWRF5M50B04-B0 5.1 5.9 6.1 6.3 70 5.0 6.5 5.2 5.4 5.6 5.8 6.0 6.2 Frequency (MHz) Frequency Characteristics (Spurious) TPWRF5M50B03-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) TPWRF5M50B02-B0 30 40 30 40 50 50 60 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 27 0 0 10 10 20 20 30 40 30 40 50 50 60 60 70 0.0 76 TPWRF6M00B01-B0 Attenuation (dB) Attenuation (dB) TPWRF5M50B04-B0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 3.5-6.5MHz Triple Traps TPTRF Series 8.02.0 T T B 7.02.0 Ceramic trap TPTRF_B series consist of 3 wafers with 3 trap frequencies. Recommended for Multi standard sets. EIAJ CODE 1.380.2 Features 1. Good performance of attenuation 2. Space saving for Multi set 3. Three-terminals type 5.01.0 1.70.1 0.30.1 0.50.1 2.50.2 2.50.2 5.0 max. (1) : Input (2) : Ground (3) : Output (3) (2) (in mm) (1) Part Number Nominal Center Frequency (fn1) (MHz) Nominal Center Frequency (fn2) (MHz) Nominal Center Frequency (fn3) (MHz) Attenuation (at fn1) (dB) Attenuation (at fn2) (dB) Attenuation (at fn3) (dB) 30dB Attenuation BW (fn1) (kHz) TPTRF5M50B01-B0 5.500 6.000 6.500 30 min. 30 min. 30 min. 50 min. TPTRF5M50B02-B0 5.500 5.742 6.500 30 min. 30 min. 30 min. 50 min. TPTRF5M50B04-B0 5.500 5.742 6.000 30 min. 30 min. 30 min. 50 min. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit 8.2H 150ohm 50ohm 330ohm Rg=50ohm S.S.G. R.F. Voltmeter Frequency Characteristics Frequency Characteristics (Spurious) TPTRF5M50B01-B0 0 0 10 10 20 20 30 Attenuation (dB) Attenuation (dB) TPTRF5M50B01-B0 40 50 60 30 40 50 60 70 70 80 80 90 5.000 28 5.500 6.000 Frequency (MHz) 6.500 7.000 90 0.0 2.5 5.0 7.5 10.0 Frequency (MHz) 77 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment 0.30.2 Ceramic Discriminator 10.7MHz Ultra Thin Chip Type CDSCB Series 0.20.2 1.4 max. 4.50.1 2.00.1 CDSCB10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in a wide bandwidth. They have 1.0mm max. thickness and small mounting area (4.5x2.0mm). 0.40.05 1.0 max. 4.1 max. 0.4(ref.) 0.4(ref.) 0.80.1 0.80.1 Features 1. Compact and high reliability and recommended for automotive applications. 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. Stable temperature characteristics 5. Recommended for Pb free soldering 1.50.1 1.50.1 (in mm) Center Frequency (fo) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (%) IC CDSCB10M7GA105A-R0 10.700 30kHz 220 min. 110 min. 1.5 max. TEA5757HL CDSCB10M7GA113-R0 10.700 30kHz 300 min. 110 min. 1.0 max. TA2154FN CDSCB10M7GA119-R0 10.700 30kHz 500 min. 75 min. 1.0 max. TRF6901 CDSCB10M7GA121-R0 10.700 30kHz 390 min. 80 min. 1.0 max. LV23100V CDSCB10M7GF072-R0 10.700 (fn) fn150 min. 130 min. 2.0 max. TA31161 CDSCB10M7GF109-R0 10.700 (fn) fn100 min. 170 min. 3.0 max. TK14588V Part Number (fn) means nominal center frequency (10.700MHz). For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A, B, C, D, E M Combination A, B, C Standard Land Pattern Dimensions 3.0 2.6 29 CODE 1.0 2.0 1.0 (in mm) 78 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Test Circuit CDSCB10M7GA105A-R0 CDSCB10M7GA113-R0 Vcc (1.2V) 35 3 34 4 33 5 32 6 100k 28 0.01 27 26 25 24 23 22 21 20 19 18 17 16 11 12 13 14 15 TA2154FN (TOSHIBA) 1 2 3 4 5 6 7 8 9 10 + X 30 8 29 9 28 10 27 11 26 12 DC OUT 29 31 TEA5757HL (PHILIPS) 7 30 S.S.G. 2.2 680p 2 0.01 + 100 0.01 10 + 48 47 46 45 44 43 42 41 40 39 38 37 0.1 1 36 0.01 0.1 0.01 Vcc (3.0V) D.C. OUT AF OUT X : CDSCB10M7GA113-R0 Unit C : F R: S.S.G. 10 25 0.47 0.1 + X AFC (n) 0.22 150 AF OUT X : CDSCB10M7GA105A-R0 Unit C : F R: CDSCB10M7GA119-R0 CDSCB10M7GA121-R0 Vcc (3.0V) IF Input 10p 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 LV23100V (SANYO) 1 48 47 46 45 44 43 42 41 40 39 38 37 36 1 34 32 6 TRF6901 31 7 (TEXAS INSTRUMENTS) 30 8 29 9 28 100p 10 27 11 26 12 25 13 14 15 16 17 18 19 20 21 22 23 24 0.01 + 7 8 9 10 11 12 13 14 15 16 17 18 0.047 + 47p + 0.47 0.01 10k 5 6 10k 10 1000p 33 4 5 X 3 4 1 35 3 3.3k 0.1 + 1 0.22 0.47 S.G. 0.047 + 100p 10k 100 2 2 X 75 0.01 82p 10 4.7 0.015 22+ 10p 120p Vcc (3.2V) 0.01 220k 15p 0.047 0.01 D.C. Output AF Output 68p 0.01 0.01 AF Output + 100p 4.7 AFC (p) 330p 0.1 13 14 15 16 17 18 19 20 21 22 23 24 18 17 16 15 14 13 12 11 10 PIC16F84 (Control IC) PIC16F84 1 2 3 4 5 1k 2.2 6 7 1 8 2 3 4 5 6 7 8 9 9 10k + 10k 18 17 16 15 14 13 12 11 10 0.1 X : CDSCB10M7GA119-R0 Unit C : F R: L:H 1k 2.2 X : CDSCB10M7GA121-R0 CDSCB10M7GF072-R0 + 10k 0.1 Unit C : F R: CDSCB10M7GF109-R0 Vcc (3V) 0.01 1.2 Vcc (3V) 4.7 R R 0.01 X X 0.01 D.C. OUT 10p 13 12 11 10 51k TA31161 (TOSHIBA) 5 0.01 6 7 8 + 33 IF IN 0.01 X : CDSCB10M7GF072-R0 R : 820 Unit C : F R: L:H 16 15 1 2 14 13 12 11 10 9 7 8 TK14588V (TOKO) S.S.G. 0.01 4 0.01 3 0.01 2 51 1 29 8p 12k 9 0.01 14 3 4 5 6 + 0.01 15 4.7 16 AF OUT 0.01 1000p 0.01 AF OUT X : CDSCB10M7GF109-R0 R : 820 Unit C : F R: L:H 79 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CDSCB10M7GA105A-R0 1000 CDSCB10M7GA113-R0 100 1000 10 100 100 AF Output 1 1 10 Distortion 10 1 1 0.1 T.H.D. (%) 10 T.H.D. (%) AF Output Voltage (mV) Distortion AF Output Voltage (mV) AF Output 100 0.1 Input = 100 dB fdev. = 75kHz fmod. = 1kHz Vcc = 3.0V 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 10.3 10.4 10.5 Frequency (MHz) CDSCB10M7GA119-R0 1000 10.7 10.8 10.9 11.0 11.1 CDSCB10M7GA121-R0 100 1000 10 100 100 AF Output 1 1 T.H.D. (%) Distortion 10 AF Output Voltage (mV) AF Output 100 AF Output Voltage (mV) 10.6 Frequency (MHz) 10 Distortion 10 1 1 0.1 T.H.D. (%) 10.3 Input = 100 dB fdev. = 75kHz fmod. = 1kHz Vcc = 1.2V 0.1 Input = 100 dB fdev. = 75kHz fmod. = 1kHz Vcc = 3.2V Input = 100 dB fdev. = 60kHz fmod. = 1kHz Vcc = 3.0V 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 10.3 11.1 10.4 10.5 CDSCB10M7GF072-R0 10.8 10.9 11.0 11.1 CDSCB10M7GF109-R0 100 100 10 100 10 10 1 10 1 10.3 0.1 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 11.1 0.1 1 Input = 100dB fdev. = 80kHz fmod. = 1kHz Vcc = 3.0V 10.3 T.H.D. (%) 1000 AF Output Voltage (mV) 100 1 80 10.7 1000 T.H.D. (%) AF Output Voltage (mV) 29 10.6 Frequency (MHz) Frequency (MHz) 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 11.1 Input = 100dB fdev. = 64kHz fmod. = 1kHz Vcc = 3.0V P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Discriminator 10.7MHz Standard Lead Type CDALF Series 8.01.0 Freq. Rank (Color Dot) EIAJ CODE MARKING 5.01.0 CDALF10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in wide bandwidths. 5.01.0 0.40.1 0.650.1 Features 0.50.1 5.00.2 3.01.0 0.30.1 1. Compact and excellent mechanical strength 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. Stable temperature characteristics 5. We recommend combination: ceramic discriminator CDALF10M7 series and "CERAFIL" SFELF10M7 Series of the same frequency rank. CDALF10M7G_ Series (in mm) 8.01.0 EIAJ CODE MARKING 5.01.0 Freq. Rank (Color Dot) 0.650.1 5.00.2 3.01.0 0.30.1 0.50.1 5.01.0 0.40.1 CDALF10M7C_ Series (in mm) Center Frequency (fo) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (%) CDALF10M7GA016-B0 10.700 30kHz 300 min. within60 to 90mV 0.9 max. TA8122F CDALF10M7GA018-B0 10.700 30kHz 300 min. within60 to 90mV 0.9 max. TA8132N CDALF10M7GA046-B0 10.700 30kHz 330 min. 280 min. 1.0 max. LA1832 CDALF10M7GA048-B0 10.700 30kHz 400 min. 700 min. 1.0 max. LA1835 CDALF10M7GA092-B0 10.700 30kHz 300 min. 60 min. 1.0 max. TA2132P CDALF10M7CA005A-B0 10.700 30kHz 100 min. 600 min. 6.0 max. LA7770 CDALF10M7CA040-B0 10.700 30kHz 130 min. 40 min. 0.7 max. TEA5710 Part Number IC For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. CDALF10M7GA018-B0: Color dot is different from standard series. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A, B, C, D, E M Combination A, B, C 30 81 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Test Circuit CDALF10M7GA018-B0 Vcc 3V CDALF10M7GA018 1k DC out AF out 2.2 2.5 270 DC Out AF Out 330p 1k SFELF10M7DF00 + 0.033 330p 0.022 24k 0.033 + 0.1 VCC +3V 24 23 22 21 20 19 18 17 16 15 14 13 TA8122F (TOSHIBA) 0.1 1F in 24k CDALF10M7GA016-B0 24 23 22 21 20 19 18 17 16 15 14 13 3 4 5 6 7 8 9 10 11 12 TA8132N (TOSHIBA) 0.022 2 + 22 1 CDALF10M7GA016 1 2 3 4 5 6 7 8 9 10 11 12 22 SFELF10M7DF00 + 0.022 Unit R: C:F 270 0.022 IF in Unit R: C:F Vcc 3V CDALF10M7GA046-B0 CDALF10M7GA048-B0 AF OUT Vt CSBLA456KE2ZF15 CSBLA456KE2ZF15 0.01 AFC 0.047 + + 1 + 3.3 24 23 22 21 20 19 LA1832 6.8k 1 2 3 4 5 18 17 16 15 14 7 8 9 10 11 270 + 10 3.3 + 300 75 + REG L. P. F. 30 29 28 27 26 1 2 3 4 5 25 24 Rch Lch 10 10 + + 23 22 21 20 19 18 17 16 11 12 13 14 15 LA1835 (SANYO) 1 0.047 L. P. F. 33n + 1 15k 5k 12 3k 2.2 CDALF10M7GA046 75 IF-IN AFC 47n 1 13 (SANYO) 6 300 0.047 33n 1500p 0.01 + 0.047 0.047 6 Unit R: C:F 8 9 47n 10 1 1k 1k IF-IN 100 7 10 510 5.6k 1200p + 22 20k 3k + 10 + + 0.47 Unit R: C:F CDALF10M7GA048 10 VCC(7V) REG. Vcc (5V) CDALF10M7GA092-B0 CDALF10M7CA005A-B0 14 13 12 11 10 0.1 2k 0.1 10k 5.6k 0.01 DATA OUT 10k 2k Demod.OUT 10k CDALF10M7CA005A 15 4.7 0.033 20k 330p 16 Vcc(3.0V) + DC Bias +5.2V DC Bias +5V CDALF10M7GA092 20k AF OUT + 470p 2.2 470p DC OUT 220p 20 19 1 2 18 17 16 15 14 13 12 11 9 10 9 IC : LA7770 (SANYO) TA2132P(TOSHIBA) VCC (3V) + 0.01 AF-OUT 100 10 + 0.01 + 1 DC-OUT 24 23 22 21 20 19 18 TEA5710 1 2 3 4 5 0.22 6 17 16 15 14 13 10 11 12 (PHILIPS) 7 8 9 0.01 280 0.22 50 S.S.G. 82 6 7 8 + - 5p 0.01 270 0.01 CDALF10M7CA040-B0 + 5 IF IN Unit R: C:F IF-IN 100 4 50 Vcc=12V 30 3 8 0.01 7 0.01 6 0.01 5 33 4 + 0.022p 3 1000p 2 4.7 1 Unit R: C:F Unit R: C:F P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CDALF10M7GA016-B0 10 1000 Distortion (%) AF Output 1 10 Distortion 10 AF Output 100 10 1 Distortion 0.1 1 100 Distortion (%) 100 CDALF10M7GA018-B0 Recovered AF Output Voltage (mV) 100 Recovered AF Output Voltage (mV) 1000 1 0.1 Input signal conditions Input Level Mod. Freq. Freq.Dev. 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 Input signal conditions 80dB 1000Hz 22.5kHz Input Level 80dB Mod. Freq. 1000Hz Freq. Dev. 22.5kHz 11.0 10.4 10.5 CDALF10M7GA046-B0 1000 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 CDALF10M7GA048-B0 100 100 1000 10 100 10 10 1 AF Output 1 10 0.1 1 10.4 10.5 10.6 10.7 10.8 10.9 Distortion 1 0.1 Input signal conditions Input signal conditions Input Level 112dB Mod. Freq. 1000Hz Freq. Dev. 75kHz Input Level Mod. Freq. Freq.Dev. 10.4 11.0 10.5 Frequency (MHz) CDALF10M7GA092-B0 1000 Distortion (%) Recovered AF Output Voltage (mV) Distortion Distortion (%) Recovered AF Output Voltage (mV) AF Output 100 10.6 10.7 10.8 Frequency (MHz) 10.9 112dB 1000Hz 75kHz 11.0 CDALF10M7CA005A-B0 5000 100 500 AF Output 100 10 1 Distortion 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 100 10 Input signal conditions Input signal conditions Input Level 100dB Input Level Mod.Freq. Freq.Dev. Mod. Freq. 1000Hz Freq. Dev. 75kHz 80dB 1000Hz 22.5kHz 30 1 10 0.1 1 Distortion Distortion (%) AF Output Distortion (%) Recovered AF Output Voltage (mV) Recovered AF Output Voltage (mV) 1000 10 100 10.6 10.7 10.8 Frequency (MHz) Continued on the following page. 83 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E1.pdf 05.3.30 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics CDALF10M7CA040-B0 100 100 10 AF Output Distortion 10 1 1 0.1 Distortion (%) Recovered AF Output Voltage (mV) 1000 Input signal conditions Input Level 100dB Mod. Freq. 1000Hz Freq. Dev. 22.5kHz 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 30 84 10.9 11.0 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Discriminator 10.7MHz Applied IC Reference Table Please see following table for reference applied IC. If you can not find IC part number seeking, please contact our sales representative. ex. : CDALF10M7GA016-B0 Suffix Number CDSCB10M7GA105A-R0 Suffix Number IC Manufacturer ATMEL INFINEON MATSUSHITA MOTOROLA NEC PHILIPS RFMD ROHM IC Part Number Suffix Number U2501B 028 U2765B IC Manufacturer IC Part Number Suffix Number KA22425 089 095 KA2244 059 U4313B 081 KA22901 090 U4490B 034V KA2292 063 SAMSUNG U829B 025 KA2295 064 TDA1576T 051 KA2297 091 TDA6160X 038 KA2298B 065 TDA6160-2X 044 KB22902 103 AN6138SH 097 S1A0903 118A AN7004 011 LA1150 070 AN7006S 014A LA1225M 108A AN7007SU 013 LA1260 007 AN7232 053 LA1805 026 MC13156 049 LA1810 022 MC13158 073 LA1814M 115 MC13173 052 LA1816 015 MC3363 087 LA1822 094 PC1391M 056 LA1823 101 NE604 020 LA1827M 083 SA605 042 LA1830 037 SANYO SA626 047 LA1831 043 SA636DK 096 LA1832 / M 046 SA639 085 LA1833 086 TBA120U 029 LA1835 / M 048 TBA229-2 021A LA1838 / M 079 TDA1596T 120 LA7770 023 TDA2557 024 LV23000M 114 TEA5591 017 LV23100V 121 TEA5592 030 CX1691M 078 TEA5594 035 CX-20029 001 SONY TEA5710 040 CX-20076 002 TEA5712T 055 CXA1030P 012 TEA5757HL 105A CXA1111 093 TEA5762 / 5757 061 CXA1238 027 UAA3220TS 098 CXA1238N 027N RF2905 111 CX1343M 032 RF2925 104 CXA1376AM 054 BA1440 019 CXA1538M / N / S 069 BA1448 060 CXA1611 075 BA4110 066 CXA1619B 117 BA4220 041 CXA1991N 068 BA4230AF 005 CX3067M 076 BA4234L 004 TRF6901 119 BA4240L 067 T. I. 30 Continued on the following page. 85 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E1.pdf 05.3.30 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Discriminator 10.7MHz Applied IC Reference Table Continued from the preceding page. IC Manufacturer TOKO TOSHIBA 30 86 IC Part Number Suffix Number TK14570L 122 TK14581 062 TK14583V 112 TK14588V 109 TA2003 031 TA2007 033 TA2008A / AN 045 TA2022 050 TA2029 036 TA2046 058 TA2057 057 TA2099N 082 TA2104AFN 080 TA2104F 080A TA2111N / F / FN 077 TA2132 092 TA2132BP 092D TA2142FN 102 TA2149AN 100A TA2149N 100 TA2154FN 113 TA2159F 116 TA31161 072 TA31275FN 123 TA7130P 009 TA7303P 008 TA7640AP 006 TA7765AF 071 TA8122AN / AF 016 TA8132AN / AF 018 TA8186 039 TA8721ASN 088 TB2132FN 128 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Discriminator 3.5-6.5MHz Wide Bandwidth Type CDSRF Series 10.0 max. MARKING 8.0 max. Ceramic discriminator CDSRF series is a wide band, low profile type using thickness shear mode vibration. EIAJ CODE Features 1. Low profile 8.0mm type 2. Suitable for Multi-sound Broadcasting system 3. Two-terminals type and three-terminals type are available. 5.01.0 1.380.2 0.50.1 5.00.2 4.0 max. 0.30.1 CDSRF_EK Series (in mm) EIAJ M A R K I N G CODE 5.01.0 1.380.2 1.70.1 2.50.2 2.50.2 4.0 max. 0.30.1 0.50.1 CDSRF_CK Series 8.0 max. 10.0 max. (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Nominal Center Frequency (fn) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output Voltage (at fn) (mV) Distortion (%) IC CDSRF4M50EK020-B0 4.500 fn80 min. 245 min. 1.0 max. LA7550/7555 CDSRF4M50EK023-B0 4.500 fn60 min. 230 min. 2.5 max. M51496P CDSRF4M50EK035-B0 4.500 fn55 min. 240 min. 1.0 max. LA7680/7681 CDSRF4M50EK049-B0 4.500 fn100 min. 220 min. 1.0 max. LA7577 CDSRF4M50EK060-B0 4.500 fn90 min. 90 min. 1.0 max. M52318SP CDSRF4M50EK069-B0 4.500 fn60 min. 320 min. 1.5 max. TA8701N CDSRF4M50EK070-B0 4.500 fn50 min. 65 min. 1.5 max. M52007FP CDSRF5M50EK023-B0 5.500 fn45 min. 220 min. 1.0 max. M51496P CDSRF5M50EK035-B0 5.500 fn80 min. 350 min. 1.0 max. LA7680/7681 CDSRF5M50EK049-B0 5.500 fn60 min. 500 min. 1.0 max. LA7577 CDSRF5M50EK054-B0 5.500 fn100 min. 300 min. 1.2 max. TDA3857 CDSRF5M50EK060-B0 5.500 fn70 min. 190 min. 1.5 max. M52318SP CDSRF5M74EK054-B0 5.742 fn90 min. 340 min. 1.2 max. TDA3857 CDSRF6M00EK049-B0 6.000 fn60 min. 500 min. 1.0 max. LA7577 CDSRF6M00EK054-B0 6.000 fn90 min. 340 min. 1.5 max. TDA3857 CDSRF6M00EK060-B0 6.000 fn60 min. 180 min. 2.5 max. M52318SP CDSRF6M50EK020-B0 6.500 fn110 min. 350 min. 1.2 max. LA7550/7555 CDSRF6M50EK049-B0 6.500 fn60 min. 500 min. 1.0 max. LA7577 CDSRF6M50EK054-B0 6.500 fn90 min. 340 min. 1.5 max. TDA3857 CDSRF6M50EK060-B0 6.500 fn60 min. 160 min. 2.5 max. M52318SP CDSRF4M50CK020-B0 4.500 fn50 min. 280 min. 2.0 max. PC1382C CDSRF4M50CK026-B0 4.500 fn40 min. 70 min. 1.2 max. LA7530 CDSRF4M50CK029-B0 4.500 fn65 min. 250 min. 1.2 max. M51365SP CDSRF4M50CK030-B0 4.500 fn40 min. within130 +30/-20mV 3.0 max. M51348FP Part Number 31 Continued on the following page. 87 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Nominal Center Frequency (fn) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output Voltage (at fn) (mV) Distortion (%) CDSRF5M50CK026-B0 5.500 fn50 min. 500 min. 3.0 max. LA7530 CDSRF5M50CK029-B0 5.500 fn70 min. 420 min. 1.5 max. M51365SP CDSRF5M50CK030-B0 5.500 fn55 min. 150 min. 3.0 max. M51348FP CDSRF6M00CK026-B0 6.000 fn50 min. 400 min. 3.0 max. LA7530 CDSRF6M00CK029-B0 6.000 fn70 min. 450 min. 1.7 max. M51365SP CDSRF6M00CK030-B0 6.000 fn55 min. 150 min. 3.0 max. M51348FP CDSRF6M50CK020-B0 6.500 fn60 min. 480 min. 2.0 max. PC1382C CDSRF6M50CK026-B0 6.500 fn35 min. 400 min. 3.0 max. LA7530 CDSRF6M50CK029-B0 6.500 fn70 min. 430 min. 2.0 max. M51365SP Part Number IC Characteristics shown above is as of 100% Dev. Part Numbers are varied with applied IC. Please note circuits and specifications are also varied with IC. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit CDSRF4M50CK029-B0 IF-in 680 (2) 3.3k 10n 23 22 21 20 19 18 17 16 15 14 0.01 13 IN 3 4 5 6 7 8 18 9 10 11 12 4.7 19 M51365SP (MITSUBISHI) 14 AF Out + 7 10 12 Vcc (12V) 0.01 10n 10n Vcc=12V 100 10k 15n 5.6k 2 680 1 DC Out 17 13 50 LA7577 (SANYO) 18 Unit C : F R: L:H + 10 0.01 24 AF-out 12p (3) 680 (1) 0.01 CDSRF4M50EK049-B0 Ground Ground Unit C : F R: Frequency Characteristics CDSRF4M50EK049-B0 CDSRF4M50CK029-B0 300 300 1 100 10 10 1 Distoriton Distoriton 1 0.1 4.3 31 4.5 Frequency (MHz) 88 4.7 1 0.1 4.3 4.5 Frequency (MHz) 4.7 Distoriton (%) 10 Recovered AF Output Voltage (mV) AF Output 10 Distoriton (%) Recovered AF Output Voltage (mV) AF Output 100 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Soldering and Mounting) CERAFILr 10.7MHz Chip Type SFECF Series Temperature (C) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (260C max.) 260 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. 2. Wash The component cannot withstand washing. CERAFILr 10.7MHz Chip Type SFECD Series Temperature (C) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (260C max.) 260 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. 2. Wash The component cannot withstand washing. 31 Continued on the following page. 89 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Soldering and Mounting) Continued from the preceding page. CERAFILr 10.7MHz Chip Type SFECV Series Temperature (C) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (240C max.) 240 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 30 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. 2. Wash The component cannot withstand washing. CERAFILr 10.7MHz Lead Type The component cannot withstand washing. CERAFILr 4.5-6.5MHz Chip Type Temperature (C) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (240C max.) 240 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. 31 2. Wash The component cannot withstand washing. CERAFILr 3.5-6.5MHz Lead Type The component cannot withstand washing. 90 60-120 sec. 30 sec. max. 120 sec. min. P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Soldering and Mounting) CERAFILr 455kHz Chip Type PFWCC Series Temperature (C) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (250C max.) 250 220 Pre-heating (150-180C) 100 Heating (220C) Gradual Cooling 30 sec. min. 60-120 sec. 20 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. 2. Wash The component cannot withstand washing. Continued on the following page. 31 91 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Soldering and Mounting) Continued from the preceding page. CERAFILr 455kHz Chip Type SFPKA Series 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (260C max.) Temperature (C) 260 230 Heating (230C) Pre-heating 100 (150-180C) 30 sec. min. (2) Soldering Iron Electrode is soldered directly with the tip of soldering iron at +3505C for 3.00.5 seconds. 2. Wash (1) Cleaning Solvent CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA), Water (Demineralized Water), Cleaning Water Solution (Cleanthrough-750H, Pine Alpha 100S), Silicon (Technocare FRW) (2) Cleaning Conditions Immersion Wash 2 minutes max. in above solvent at +60C max. Shower or Rinse Wash 2 minutes max. in above solvent at +60C max. (3) Notice When components are immersed in solvent, be sure to maintain the temperature of components below the temperature of solvent. Please do not use ultrasonic cleaning. Total washing time should be within 4 minutes. Please ensure the component is thoroughly evaluated in your application circuit. Please do not use chlorine, petroleum and alkaline cleaning solvents. If you plan to use any other type of solvents, please consult with Murata or Murata representative prior to using. CERAFILr 455kHz Lead Type The component cannot withstand washing. 31 92 60-120 sec. Gradual Cooling 40 sec. max. 120 sec. min. P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Soldering and Mounting) Ceramic Trap 4.5-6.5MHz Chip Type Temperature (C) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (240C max.) 240 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 30 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. 2. Wash The component cannot withstand washing. Ceramic Trap 3.5-6.5MHz Lead Type The component cannot withstand washing. Ceramic Discriminator 10.7MHz Chip Type Temperature (C) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (260C max.) 260 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3005C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. 2. Wash The component cannot withstand washing. 31 Ceramic Discriminator 10.7MHz Lead Type The component cannot withstand washing. Ceramic Discriminator 3.5-6.5MHz The component cannot withstand washing. 93 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Handling) CERAFILr 10.7MHz Chip Type SFECF Series 31 1. The component will be damaged when an excessive stress is applied. 2. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 3. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 5. The component may be damaged during mounting process if some part of mounter such as positioning claws, nozzle are worn down. The regular maintenance recommended for mounters should be done to prevent the troubles. 6. The component is recommended with placement machines which employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 7. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. 8. Do not clean or wash the component as it is not hermetically sealed. 9. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 10. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 11. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 12. The components, packed in the moisture proof bag (dry pack), are sensitive to moisture. The following treatment is required before applying re-flow soldering. To avoid reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere at 30C and below 60%R.H., and solder within 1 week. 13. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. [Component layout close to board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B Continued on the following page. 94 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Handling) Continued from the preceding page. CERAFILr 10.7MHz Chip Type SFECD Series 1. The component will be damaged when an excessive stress is applied. 2. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 3. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 5. The component may be damaged during mounting process if some part of mounter such as positioning claws, nozzle are worn down. The regular maintenance recommended for mounters should be done to prevent the troubles. 6. The component is recommended with placement machines which employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 7. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. 8. Do not clean or wash the component as it is not hermetically sealed. 9. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 10. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 11. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 12. The components, packed in the moisture proof bag (dry pack), are sensitive to moisture. The following treatment is required before applying re-flow soldering. To avoid reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere at 30C and below 60%R.H., and solder within 1 week. 13. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. [Component layout close to board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B 31 Continued on the following page. 95 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E1.pdf 05.3.30 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Handling) Continued from the preceding page. CERAFILr 10.7MHz Chip Type SFECV Series 31 1. The component will be damaged when an excessive stress is applied. 2. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 3. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 5. The component may be damaged during mounting process if some part of mounter such as positioning claws, nozzle are worn down. The regular maintenance recommended for mounters should be done to prevent the troubles. 6. The component is recommended with placement machines which employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 7. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. 8. Do not clean or wash the component as it is not hermetically sealed. 9. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 10. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 11. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 12. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 96 [Component direction] Put the component lateral to the direction in which stress acts. [Component layout close to board] Perforation A B Slit C Susceptibility to stress is in the order of : A>C>B P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Handling) CERAFILr 10.7MHz Lead Type 7. Accurate test circuit values are required to 1. Do not use this product with bend. The component measure electrical characteristics. It may be a may be damaged if excess mechanical stress is cause of miscorrelation if there is any deviation, applied to it mounted on the printed circuit board. especially stray capacitance, from the test 2. The component may be damaged when an excessive stress circuit in the specification. is applied. 8. For safety purposes, connect the output of filters 3. All kinds of re-flow soldering must not be applied to the IF amplifier through a D.C. blocking on the component. capacitor. Avoid applying a direct current to the 4. Do not clean or wash the component as it is not output of ceramic filters. hermetically sealed. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 6. In case of covering discriminator with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. CERAFILr 4.5-6.5MHz Chip Type 1. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. Design layout of components on the PC board to minimize the stress imposed on the wrap or flexure of the board. 3. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 4. The component may be damaged during mounting process if some part of mounter such as positioning claws, nozzle are worn down. The regular maintenance recommended for mounters should be done to prevent the troubles. 5. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. 6. Cleaning or washing of the component is not acceptable due to non sealed construction. 7. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 9. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. [Component direction] Put the component lateral to the direction in which stress acts. [Component layout close to board] Perforation A Susceptibility to stress is in the order of : A>C>B B Slit C 31 97 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E1.pdf 05.3.30 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Handling) CERAFILr 3.5-6.5MHz Lead Type 7. In case of covering filter with over coat, 1. Do not use this product with bend. The component conditions such as material of resin, cure may be damaged if excess mechanical stress is temperature, and so on should be evaluated applied to it mounted on the printed circuit board. carefully. 2. The component may be damaged when an excessive stress 8. Accurate test circuit values are required to is applied. measure electrical characteristics. It may be a 3. All kinds of re-flow soldering must not be applied cause of miscorrelation if there is any on the component. deviation, especially stray capacitance, from the 4. Do not clean or wash the component as it is not test circuit in the specification. hermetically sealed. 9. For safety purposes, connect the output of filters 5. Please contact Murata or Murata representative for to the IF amplifier through a D.C. blocking soldering condition, in case of using lead free capacitor. Avoid applying a direct current to the solder. output of ceramic filters. 6. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. CERAFILr 455kHz Chip Type PFWCC Series 1. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 3. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 4. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. [Component direction] Put the component lateral to the direction in which stress acts. [Component layout close to board] Perforation A B Slit C Susceptibility to stress is in the order of : A>C>B CERAFILr 455kHz Chip Type SFPKA Series 1. The component will be damaged when an excessive stress is applied. 2. Use coupling capacitors to prevent applying D.C. voltage between input-ground, output-ground of "CERAFIL" as D.C. current may harm the component. 3. In the case that the component is cleaned, confirm that no reliability degradation is created. 4. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 31 98 6. The product, packed in the moisture-proof bag (dry pack), is sensitive to moisture. The following treatment is required before applying re-flow soldering, to avoid package cracks or reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere of below 25 degree C and below 65%R.H., and solder within 48 hours. 7. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Handling) CERAFILr 455kHz Lead Type 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. The component will be damaged when an excessive stress is applied. 3. All kinds of re-flow soldering must not be applied on the component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 6. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 7. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 8. Use coupling capacitors to prevent applying D.C. voltage between input-ground, output-ground of "CERAFIL" as D.C. current may harm the component. 9. For safety purpose, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid appliying a direct current to the output of ceramic filters. Ceramic Trap 4.5-6.5MHz Chip Type 1. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. Design layout of components on the PC board to minimize the stress imposed on the wrap or flexure of the board. 3. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 4. The component may be damaged during mounting process if some part of mounter such as positioning claws, nozzle are worn down. The regular maintenance recommended for mounters should be done to prevent the troubles. 5. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. 6. Cleaning or washing of the component is not acceptable due to non sealed construction. 7. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 9. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. [Component direction] Put the component lateral to the direction in which stress acts. [Component layout close to board] Perforation A Susceptibility to stress is in the order of : A>C>B B Slit C 31 99 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E1.pdf 05.3.30 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Handling) Ceramic Trap 3.5-6.5MHz Lead Type 7. In case of covering filter with over coat, 1. Do not use this product with bend. The component conditions such as material of resin, cure may be damaged if excess mechanical stress is temperature, and so on should be evaluated applied to it mounted on the printed circuit board. carefully. 2. The component may be damaged when an excessive stress 8. Accurate test circuit values are required to is applied. measure electrical characteristics. It may be a 3. All kinds of re-flow soldering must not be applied cause of miscorrelation if there is any on the component. deviation, especially stray capacitance, from the 4. Do not clean or wash the component as it is not test circuit in the specification. hermetically sealed. 9. For safety purposes, connect the output of filters 5. Please contact Murata or Murata representative for to the IF amplifier through a D.C. blocking soldering condition, in case of using lead free capacitor. Avoid applying a direct current to the solder. output of ceramic filters. 6. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. Ceramic Discriminator 10.7MHz Chip Type 31 1. The component mounted on the PCB may be damaged if excess mechanical stress is applied. 2. Layout the components on the PCB to minimize the stress imposed on the warp or flexure of the board. 3. After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to be lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 4. The component may be damaged during mounting process if some part of mounter such as positioning claws, nozzle are worn down. The regular maintenance recommended for mounters should be done to prevent the troubles. 5. When correcting component's position with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be considerd to prevent the electrode erosion. 6. Do not clean or wash the component as it is not hermetically sealed. 7. In case of overcoating the part, coating conditions such as material of resin, curing temperature, and so on should be evaluated carefully. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 9. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 100 [Component direction] Put the component laterally to the direction in which stress acts. [Component layout close to board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E1.pdf 05.3.30 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Handling) Ceramic Discriminator 10.7MHz Lead Type 7. Accurate test circuit values are required to 1. Do not use this product with bend. The component measure electrical characteristics. It may be a may be damaged if excess mechanical stress is cause of miscorrelation if there is any deviation, applied to it mounted on the printed circuit board. especially stray capacitance, from the test 2. The component may be damaged when an excessive stress circuit in the specification. is applied. 8. For safety purposes, connect the output of filters 3. All kinds of re-flow soldering must not be applied to the IF amplifier through a D.C. blocking on the component. capacitor. Avoid applying a direct current to the 4. Do not clean or wash the component as it is not output of ceramic filters. hermetically sealed. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 6. In case of covering discriminator with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. Ceramic Discriminator 3.5-6.5MHz 7. In case of covering filter with over coat, 1. Do not use this product with bend. The component conditions such as material of resin, cure may be damaged if excess mechanical stress is temperature, and so on should be evaluated applied to it mounted on the printed circuit board. carefully. 2. The component may be damaged when an excessive stress 8. Accurate test circuit values are required to is applied. measure electrical characteristics. It may be a 3. All kinds of re-flow soldering must not be applied cause of miscorrelation if there is any on the component. deviation, especially stray capacitance, from the 4. Do not clean or wash the component as it is not test circuit in the specification. hermetically sealed. 9. For safety purposes, connect the output of filters 5. Please contact Murata or Murata representative for to the IF amplifier through a D.C. blocking soldering condition, in case of using lead free capacitor. Avoid applying a direct current to the solder. output of ceramic filters. 6. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 31 101 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Minimum Quantity Taping Ammo Pack Bulk SFELF 1,500 500 SFELG 1,500 500 SFKLF 1,500 500 o330mm o180mm Magazine Box CERAFILr<10.7MHz> SFECD 2,000 SFECF 2,000 SFECV 2,000 500 SFTLF 1,000 500 SFSRA 2,000 500 SFSRF 1,500 500 SFVLF CERAFILr<3.5-6.5MHz> SFSKA 3,000 CERAFILr<455kHz> 500 BFULA 200 CFULA CFWLA PFSLF PFWCC 500 1,500 500 200 SFULA 500 50 SFZLA 200 50 Ceramic Traps<3.5-6.5MHz> TPSKA 3,000 TPSRA 2,000 500 TPSRF 1,500 500 TPTRF 1,500 500 1,500 500 1,500 500 1,500 500 TPWKA 3,000 TPWRF Ceramic Discriminators<10.7MHz> CDALF CDSCB 2,000 Ceramic Discriminators<3.5-6.5MHz> CDSRF 102 50 1,000 SFPLA 31 150 1,000 PFWLF SFPKA 1,500 50 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging CERAFILr 10.7MHz Chip Type SFECF Series Dimensions of Carrier Tape Dimensions of Reel 40T0.15 10 pitch accumulated Trailer 160-190 4.0T0.1 o1.55T0.05 2.0T0.05 Leader Cover film Empty Chip filter o13.00.5 400-560 180 +0 -1.5 60 +1.0 -0 12.0T0.2 5.5T0.05 4.1T0.1 Empty 240-280 Components 3 max. 10 max. 1.84T0.1 Cover film 0.3T0.05 Peeling strength (0.1 to 0.7N) (0.05) 2.00.5 +0.1 3.35 -0.05 4.0T0.1 17.01.0 13.0 +1.0 -0 User direction of feed ( ) : Reference (in mm) * Part number marked side is always facing upside. * The feeding holes side of cavity tape is always input terminal. CERAFILr 10.7MHz Chip Type SFECD Series Dimensions of Carrier Tape Dimensions of Reel Trailer 160-190 40T0.15 10 pitch accumulated 4.0T0.1 o1.55T0.05 2.0T0.05 Empty Components 0.05 3 max. (3.4) Empty 240-280 400-560 (o180) 12.0T0.2 o13.00.5 2.00.5 (1.25) 3.35T0.1 0.25T0.05 (4.1) 5.5T0.05 Chip Filter Peeling strength 0.1 to 0.7N 4.0T0.1 10 max. Cover film Leader Cover film +1.0 12.5 -0 19.5 max. User direction of feed * Part Number marked side is always facing upside. * The feeding holes side of cavity tape is always input terminal. ( ) : Reference (in mm) CERAFILr 10.7MHz Chip Type SFECV Series Dimensions of carrier tape Trailer 160-190 1.75T0.1 +0 Empty 240-280 400-560 180 -1.5 +1.0 o13.00.5 60 -0 Leader Cover film Empty Components +0.08 12.0 -0.2 4.0T0.1 5.5T0.05 2.0T0.05 7.3T0.01 W0.1 o1.5 Y0.0 Dimension of reel 1.9T0.1 W0.1 Chip filter 3 max. 1.7 Y0.05 Peeling strengh 0.1 to 0.7N Cover film 10 max. 3.0T0.1 0.3T0.05 2.00.5 4.0T0.1 31 +1.0 13.0 -0 17.01.0 User direction of feed * Part number marked side is always facing upside. * The feeding holes side of cavity tape is always input terminal. ( ) : Reference (in mm) Continued on the following page. 103 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 10.7MHz Lead Type SF_LF Series P2 dh dh P H0 W1 W0 W L2 L1 W2 dS1 F1 F1 P1 D0 F t P0 Item Code Dimensions Tolerance Lead length under the hold down tape L1 Length of cut off L2 2.0 max. Pitch of components P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 Lead spacing (1) F 5.0 Lead spacing (2) F1 2.5 0.5 +0.5 -0.2 0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 0.5 3.0 min. - Width of carrier tape W 18.0 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 254.0 1.5 Total tape thickness Pitch of sprocket hole (2) t P020 Remarks To distinguish the direction - Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) Continued on the following page. 31 104 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 4.5-6.5MHz Chip Type SFSKA Series 4.30.1 Chip filter 3 max. Leader Cover film 16.00.2 Trailer 160-190 Empty Components 2.20.5 Empty 240-280 min. 400-560 801 3302 8.00.1 10 max. +0.1 +0.1 o1.5 -0.0 2.1-0.05 Peeling strength (0.1--0.7N) Cover film 0.30.05 9.00.1 7.50.1 2.00.1 4.00.1 2.30.1 +0.1 o1.5 -0.0 Dimensions of Reel 1.750.1 Dimensions of carrier tape o13.00.2 User direction of feed * Part number marked side is always facing upside. * The feeding holes side of cavity tape is always input terminal. 17.51.5 21.51.0 (in mm) Continued on the following page. 31 105 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 4.5-6.5MHz Lead Type SFSRA Series P2 P dh dh dS M W1 W L1 W0 H0 W2 M D0 P1 F1 F2 P0 t Direction Feed Item Code Dimensions Tolerance Lead length under the hold down tape L1 5.0 min. - Pitch of component P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing (1) F1 2.5 0.2 Lead spacing (2) F2 2.5 0.2 Slant to the forward or backward dh 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. - Position of Sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier Tape W2 0 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 P020 254.0 1.5 dS 0 1.0 Total tape thickness Pitch of sprocket hole (2) Body tilt Remarks Tolerance for Pitches 10ZP0=1271 Hold down tape doesn't exceed the carrier tape. The pitch of 20 sprocket holes (in mm) Continued on the following page. 31 106 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 455kHz Chip Type PFWCC Series Dimensions of Reel Empty Components +0.5 2.0 -0.2 Empty 240-280 min. 400-560 o13.00.5 180 +0 -1.5 60 +1 -0 M Chip filter 3 max. 12.00.3 M 5.40.1 Leader Cover film Trailer 160-190 (0.07) (3.6 max.) Cover film 6.10.1 8.00.1 10 max. 0.3 Peeling strength (0.1--0.7N) M o1.550.1 3.150.1 4.00.1 2.00.1 5.50.1 1.750.1 Dimensions of Carrier Tape +1 12.5 -0 User direction of feed 17.01 (in mm) * Part number marked side is always facing upside. * The feeding holes side of cavity tape is always input terminal. CERAFILr 455kHz Chip Type SFPKA Series Dimensions of Carrier Tape Trailer 160-190 1.750.1 Empty Leader Cover film Components Empty 240-280 o13.00.2 801 400-560 3302 8.80.1 7.50.1 2.00.1 +0.1 o1.5 -0 16.00.2 4.00.1 Dimensions of Reel 2.20.5 12.00.1 User direction of feed Cover film 5.30.1 17.50.5 Label 21.51.0 7.40.1 * Part number marked side is always facing upside. * The feeding holes side of cavity tape is always input terminal. (in mm) Continued on the following page. 31 107 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 455kHz Lead Type PFSLF/PFWLF Series P2 dh dh P H0 W1 W W0 L1 W2 dS1 D0 F1 F1 P1 F t P0 Item Code Dimensions Tolerance L1 3.0 min. - Pitch of component P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing (1) F 5.0 W0.5 Y0.2 Lead spacing (2) F1 2.5 0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 0.5 Lead length under the hold down tape Width of carrier tape W 18.0 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 W0.5 Y0.2 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 254.0 1.5 Total tape thickness Pitch of sprocket hole (2) t P020 Remarks Hold-down tape doesn't exceed the carrier tape. The pitch of 20 sprocket holes (in mm) Continued on the following page. 31 108 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 455kHz Lead Type SFULA Series Standard of Magazine Cassette 5.60.3 390+0 -2 100.3 4.20.25 M* M* 8.10.3 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35 CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note: Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 3. Dimensions of Magazine Cassette 18.70.3 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, with the marking of products all facing toward the "murata" mark on a magazine, and be closed with exclusive stoppers at both ends. Above should be the minimum packaging unit. 1.1 1.1 (in mm) Tolerance unless otherwise specified: 0.2 Material: Polycarbonate Camber of Case: 1mm max. against entire length (reference) Twist of Case: 0.5mm max. (reference) CERAFILr 455kHz Lead Type SFZLA Series Standard of Magazine Cassette 9.00.3 390+0 -2 7.60.25 8.10.3 10.00.3 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35 CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note: Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 3. Dimensions of Magazine Cassette 18.70.3 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, with the marking of products all facing toward the "murata" mark on a magazine, and be closed with exclusive stoppers at both ends. Above should be the minimum packaging unit. 1.1 M* M* M* 1.1 (in mm) Tolerance unless otherwise specified: 0.2 Material: Polycarbonate Camber of Case: 1mm max. against entire length (reference) Twist of Case: 0.5mm max. (reference) CERAFILr 455kHz Lead Type SFPLA Series Standard of Magazine Cassette 3. Dimensions of Magazine Cassette 9.00.3 8.10.3 100.3 1.1 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35 CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note: Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 4051.0 7.60.25 18.70.3 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, which ground terminals are all facing toward the "murata" mark on a magazine, and be closed with exclusive stoppers at the both ends. Above should be the minimum packaging unit. 1.1 HP51M0003-02 (in mm) Tolerance unless otherwise specified: 0.2 Material: Polycarbonate Camber of Case: 1mm max. against entire length (reference) Twist of Case: 0.5mm max. (reference) 31 Continued on the following page. 109 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 455kHz Lead Type CFWLA Series Standard of Magazine Cassette 4. Dimensions of Magazine Cassette 9.00.3 7.30.25 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35 CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note: Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 576.02.0 7.50.3 9.00.3 18.70.3 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, with ground terminals all facing toward the "murata" mark on a magazine, and be closed with exclusive stoppers at the both ends. Above should be the minimum packaging unit. ANTISTATIC muRataHP51M0064 5.30.3 0.6 (in mm) Tolerance unless otherwise specified: 0.2 Material: Polycarbonate Camber of Case: 1mm max. against entire length (reference) Twist of Case: 0.5mm max. (reference) 3. Magazine should be packaged in a cardboard box. MURATA model name, quantity and outgoing inspection number should be indicated on the box. Cardboard box may contain maximum 33 magazines (1,650 pieces of filter). Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series 4.30.1 Chip filter 3 max. Leader Cover film 16.00.2 Trailer 160-190 Empty Components 2.20.5 Empty 240-280 min. 400-560 801 3302 8.00.1 10 max. +0.1 +0.1 o1.5 -0.0 2.1-0.05 Peeling strength (0.1--0.7N) Cover film 0.30.05 9.00.1 7.50.1 2.00.1 4.00.1 2.30.1 +0.1 o1.5 -0.0 Dimensions of Reel 1.750.1 Dimensions of carrier tape o13.00.2 User direction of feed * Part number marked side is always facing upside. * The feeding holes side of cavity tape is always input terminal. 17.51.5 21.51.0 (in mm) Continued on the following page. 31 110 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Trap 4.5-6.5MHz Chip Type TPWKA Series 3 max. Empty Components 2.20.5 Empty 240-280 min. 400-560 801 3302 7.50.1 Leader Cover film Trailer 160-190 16.00.2 9.00.1 0.30.05 5.50.1 Chip filter +0.1 1.75 -0.05 Peeling strength o1.5 +0.1 8.00.1 -0.0 (0.1--0.7N) 10 max. Cover film 2.00.1 4.00.1 1.950.1 +0.1 o1.5 -0.0 Dimensions of Reel 1.750.1 Dimensions of carrier tape o13.00.2 User direction of feed * Part number marked side is always facing upside. * The feeding holes side of cavity tape is always input terminal. 17.51.5 21.51.0 (in mm) Continued on the following page. 31 111 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Trap 4.5-6.5MHz Lead Type TPSRA Series P2 P dh dh dS M W1 W L1 W0 H0 W2 M D0 P1 F1 F2 P0 t Direction Feed Item Code Dimensions Tolerance Lead length under the hold down tape L1 5.0 min. - Pitch of component P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing (1) F1 2.5 0.2 Lead spacing (2) F2 2.5 0.2 Slant to the forward or backward dh 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. - Position of Sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier Tape W2 0 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 P020 254.0 1.5 dS 0 1.0 Total tape thickness Pitch of sprocket hole (2) Body tilt Remarks Tolerance for Pitches 10ZP0=1271 Hold down tape doesn't exceed the carrier tape. The pitch of 20 sprocket holes (in mm) Continued on the following page. 31 112 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Trap 3.5-6.5MHz Lead Type TPSRF_J Series P2 dh dh P H0 W1 W W0 L1 W2 dS1 D0 P1 F t P0 Item Lead length under the hold down tape Code Dimensions Tolerance L1 3.0 min. - Pitch of component P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing F 5.0 +0.5 -0.2 Slant to the forward or backward dh 0 1.0 dS1 0 1.0 0.5 Slant to the left or right Width of carrier tape W 18.0 Width of hold down tape W0 6.0 min. - Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0.0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 Po20 254.0 1.5 Total tape thickness Pitch of sprocket hole (2) Remarks Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) Continued on the following page. 31 113 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Trap 3.5-6.5MHz Lead Type TPSRF_W/TPWRF/TPTRF Series P2 dh dh P H0 W1 W0 W L2 L1 W2 dS1 F1 F1 P1 D0 F t P0 Item Code Dimensions Tolerance Lead length under the hold down tape L1 Length of cut off L2 2.0 max. Pitch of components P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 Lead spacing (1) F 5.0 Lead spacing (2) F1 2.5 0.5 +0.5 -0.2 0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 0.5 3.0 min. - Width of carrier tape W 18.0 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 254.0 1.5 Total tape thickness Pitch of sprocket hole (2) t P020 Remarks To distinguish the direction - Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) Continued on the following page. 31 114 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Discriminator 10.7MHz Chip Type CDSCB Series Dimensions of Carrier Tape o1.5 2.00.05 1.750.1 4.00.1 Dimension of reel +0.1 -0 Trailer 160-190 Leader Cover film 10 Cover film 3max. User direction of feed * Part number marked side is always facing upside. * The feeding holes side of cavity tape is always input terminal. Empty 240-280 400-560 180 +0.1 -1.5 +0.1 o13.00.2 60 -0 12.00.2 (1.7 max.) 2.20.1 1.10.1 4.70.1 +0.1 o1.5 -0 0.30.05 (9.0) 4.00.1 Peeling strength 0.1 to 0.7N 5.50.05 Empty Components 2.00.5 +1.0 13.0 -0 17.01.0 ( ) : Reference (in mm) Continued on the following page. 31 115 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Discriminator 10.7MHz Lead Type CDALF Series P2 dh dh P H0 W1 W W0 L1 W2 dS1 D0 P1 F t P0 Item Lead length under the hold down tape Code Dimensions Tolerance L1 3.0 min. - Pitch of component P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing F 5.0 +0.5 -0.2 Slant to the forward or backward dh 0 1.0 dS1 0 1.0 0.5 Slant to the left or right Width of carrier tape W 18.0 Width of hold down tape W0 6.0 min. - Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0.0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 Po20 254.0 1.5 Total tape thickness Pitch of sprocket hole (2) Remarks Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) Continued on the following page. 31 116 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Discriminator 3.5-6.5MHz CDSRF_EK Series P2 dh dh P H0 W1 W W0 L1 W2 dS1 D0 P1 F t P0 Item Lead length under the hold down tape Code Dimensions Tolerance L1 3.0 min. - Pitch of component P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing F 5.0 +0.5 -0.2 Slant to the forward or backward dh 0 1.0 dS1 0 1.0 0.5 Slant to the left or right Width of carrier tape W 18.0 Width of hold down tape W0 6.0 min. - Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0.0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 Po20 254.0 1.5 Total tape thickness Pitch of sprocket hole (2) Remarks Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) Continued on the following page. 31 117 P50E1.pdf 05.3.30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Discriminator 3.5-6.5MHz CDSRF_CK Series P2 dh dh P H0 W1 W0 W L2 L1 W2 dS1 F1 F1 P1 D0 F t P0 Item Code Dimensions Tolerance Lead length under the hold down tape L1 Length of cut off L2 2.0 max. Pitch of components P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 Lead spacing (1) F 5.0 Lead spacing (2) F1 2.5 0.5 +0.5 -0.2 0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 0.5 3.0 min. - Width of carrier tape W 18.0 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 254.0 1.5 Total tape thickness Pitch of sprocket hole (2) t P020 Remarks To distinguish the direction - Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) 31 118 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. P50E1.pdf 05.3.30 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of November 2004. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. http://www.murata.com/ Head Office 1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp