86 Uncompensated 316L SS Pressure Sensor Small Profile 0 - 100mV Output Absolute and Gage DESCRIPTION The 86 uncompensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 86 uncompensated is designed for o-ring mounting and OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicon oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. Please refer to the 86 compensated and constant voltage datasheets for more information on different features of the 86. FEATURES APPLICATIONS O-Ring Mount -40C to +125C Operating Temperature 0.2% Pressure Non Linearity Solid State Reliability Medical Instruments Process Control Fresh & Waste Water Measurements Partial Vacuum Gas Measurement Pressure Transmitters Tank Level Systems (RV & Industrial) STANDARD RANGES 86U Range psig psia 0 to 5 0 to 15 0 to 30 0 to 50 0 to 100 0 to 300 0 to 500 www.meas-spec.com 1/4 June 2014 86 Uncompensated PERFORMANCE SPECIFICATIONS Supply Current: 1.5mA Ambient Temperature: 25C (unless otherwise specified) 005PSIA PARAMETERS MIN TYP MAX MIN TYP MAX UNITS NOTES Sensitivity 12 18 12 27 Zero Pressure Output -10 10 -6.0 8.0 mV/V 1 Pressure Non Linearity -0.2 0.2 -0.1 0.1 %Span 2 Pressure Hysteresis -0.10 0.10 -0.05 0.05 %Span Repeatability 15 005PSIG & 015PSI 0.02 0.02 mV/V@Span %Span 5.8K 3 0.05 0.25 %Span 4 -0.25 0.05 0.25 %Span 4 Bridge Resistance 4.0K 5.0K 6.0K 3.8K Thermal Hysteresis - Span -0.25 0.05 0.25 -0.25 Thermal Hysteresis - Offset -0.25 0.05 0.25 Temp. Coefficient - Resistance 2.4K 1.30K 1.51K 1.75K PPM/C 4 Temp. Coefficient - Span -2.0K -1.45K -1.25K -1.0K PPM/C 4 30 V/V/C 4 Temp. Coefficient - Offset -30 30 -30 Long Term Stability - Span 0.10 0.10 Long Term Stability - Offset 0.25 0.10 Supply Current 0.5 Supply Voltage Output Noise (10Hz to 1KHz) -.5 %Span/Year 1.5 2.0 5 9.5 1.0 50M mA V uV p-p 0.1 ms 3X Rated 50M 3X Pressure Burst Storage Temperature 5 0.5 0.1 Pressure Overload Operating Temperature 2.0 1.0 Response Time (10% to 90%) Insulation Resistance (50Vdc) 1.5 %Span/Year 4X Rated -40 +125 4X -40 +125 C -50 +125 -50 +125 C Media - Pressure Port Liquids and Gases compatible with 316/316L Stainless Steel Media - Reference Port Compatible with Silicon, Pyrex, Gold, Fluorosilicone Rubber, and 316/316L Stainless Steel 5 6 Notes 1. Measured at vacuum for absolute (A) and at ambient for gage (G). 2. Non linearity is 0.2 max for 5psiG devices. 3. Bridge resistance is measured with both -E pins shorted together. 4. TC values are first order coefficients to a quadratic fit over a temperature range of -20C to +85C (0C to 50C for 5psi). 5. Between case and sensing element. 6. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer. 86U www.meas-spec.com 2/4 June 2014 86 Uncompensated DIMENSIONS CONNECTIONS 86U www.meas-spec.com 3/4 June 2014 86 Uncompensated ORDERING INFORMATION 86 - 050 G - U T Vent (T = Tube, Blank = No Tube) Electrical (U = Open Bridge, Uncomp) Type (A = Absolute, G = Gage) Pressure Range Model NORTH AMERICA EUROPE Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assum ed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specif ically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. 86U www.meas-spec.com 4/4 June 2014 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 86-050A-U