107-68143 Packaging Specification 01Sep08 Rev H ASSY 10P WITH TWO LONG CONTACT FOR 2.5MM BATTERY 1. PURPOSE Define the packaging specifiction and packaging method of ASSY 10P WITH TWO LONG CONTACT for 2.5MM BATTERY. ASSY 10P WITH TWO LONG CONTACT FOR 2.5MM BATTERY 2. APPLICABLE PRODUCT Product Description Part No. 6376462-7 PLUG ASSY 10P WITH TWO LONG CONTACT FOR 2.5MM BATTERY CONN. 1376462-7 PLUG ASSY 10P WITH TWO LONG CONTACT FOR 2.5MM BATTERY CONN. 1746092-1 PLUG ASSY 10POS REVERSE TYPE 2.5mm PITCH BATTERY CONNECTOR 2013098-1 PACKAGING, PLUG ASSY 2.5mm PITCH BATTERY CONNECTOR 3. PACKAGING MATERIAL Package Part No. INNER MIDDLE Description Size(LxWxH) Usage 4-912072-5 TY Slim Battery Plug 5P 295X182X16 9/400 9-912064-2 INNER BOX TYPE-2 302X195X103 1/400 9-912064-3 URETHANE CUSHION 280X170X5 3/400 TAPE 25w 4.0MR/400 DESICCANT 10g 2/400 407x457 1/400 95X76 1/400 623853-1 1-623124-0 OUTER 995250-7 PE BAG 623865-4 INNER LABEL 2-912011-9 CARTON C-5-3/4 397X313X220 1/1600 912065-2 AIR CAP #37 C-5 1100X390X4 1/1600 623865-1 OUTER LABEL 101X101 1/1600 Inner Middle Outer LABEL - 623865-4 623865-1 SEALING - Tape Tape 4. PACKAGING QUANTITY QTY Inner Middle Outer 50 pcs/tray 400 pcs/inner box 1600 pcs/carton DR CHK APVD Sam Wu Ocean Tang Michelle Peng Tyco Electronics AMP Guangdong Ltd. East Rongqi Road, Ronggui Town, Shunde, Foshan, Guangdong, P.R. China QR-ME-030B * Trademark | Indicates change 1 of 3 LOC FR 107-68143 5. PACKING METHOD 5.1. Load connectors qty as 4 all oriented same way into tray. 4TRAY Remark: For 2013098-1: Need add the black dot mark on existing tray(See F/G dwg). 20130982013098-1tray tray tray 5.2. Place another tray onto previous tray with products.and ensure the two trays are justification completely. TRAYTRAY 5.3. Stack 8 trays with contacts one by one.then one empty tray & wrap the trays with tape(see figure 1). 8 TRAY TRAY(1) 1 3 (623853-1) 1 5.4. Place one stack into the polybag and place two bags of desiccant(1-623124-0) on top of tray & heat-seal it. TRAYTRAY(1-623124-0) 5.5. Set up an inner box. 5.6. Place a cushion on bottom of inner box, and ensure under edge of tray don't pin cushion. TRAY 5.7. Place trays full of connectors qty as 4 into the inner box and place 2 cushion on top of tray. 4 TRAYTRAY 5.8. Close cover of the inner box, place tape on the middle of three sides. () 5.9. Place an inner label on the middle of cover of box. 5.10. Set up a carton.and secure bottom flaps with tape. Rev H QR-ME-030B 2 of 3 107-68143 5. PACKING METHOD 5.11. Spread air cap and put into the box, air cap facing down. 5.12. Put 4 inner boxes full of products into the cartion and muffle 4 inner boxes with air cap. 4 5.13. Seal the box with tape. And place product identification label in "product id" marked on box. "PRODUCT ID" Rev H QR-ME-030B 3 of 3