APEX MICROTECHNOLOGY CORPORATION • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 • ORDERS (520) 690-8601 • EMAIL prodlit@apexmicrotech.com
1
SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS
1 Quiescent current IQ 25°C ±40V VIN = 0, AV = 100, RCL = .1Ω 50 mA
1 Input offset voltage VOS 25°C ±40V VIN = 0, AV = 100 ±6 mV
1 Input offset voltage VOS 25°C ±10V VIN = 0, AV = 100 ±12 mV
1 Input offset voltage VOS 25°C ±45V VIN = 0, AV = 100 ±7 mV
1 Input bias current, +IN +IB 25°C ±40V VIN = 0 ±30 nA
1 Inout bias current,–IN –IB 25°C ±40V VIN = 0 ±30 nA
1 Input offset current IOS 25°C ±40V VIN = 0 ±30 nA
3 Quiescent current IQ –55°C ±40V VIN = 0, AV = 100, RCL = .1Ω 100 mA
3 Input offset voltage VOS –55°C ±40V VIN = 0, AV = 100 ±11.2 mV
3 Input offset voltage VOS –55°C ±10V VIN = 0, AV = 100 ±17.2 mV
3 Input offset voltage VOS –55°C ±45V VIN = 0, AV = 100 ±12.2 mV
3 Input bias current, +IN +IB –55°C ±40V VIN = 0 ±115 nA
3 Input bias current,–IN –IB –55°C ±40V VIN = 0 ±115 nA
3 Input offset current IOS –55°C ±40V VIN = 0 ±115 nA
2 Quiescent current IQ 125°C ±40V VIN = 0, AV = 100, RCL = .1Ω 50 mA
2 Input offset voltage VOS 125°C ±40V VIN = 0, AV = 100 ±12.5 mV
2 Input offset voltage VOS 125°C ±10V VIN = 0, AV = 100 ±18.5 mV
2 Input offset voltage VOS 125°C ±45V VIN = 0, AV = 100 ±13.5 mV
2 Input bias current, +IN +IB 125°C ±40V VIN = 0 ±70 nA
2 Input bias current, –IN –IB 125°C ±40V VIN = 0 ±70 nA
2 Input offset current IOS 125°C ±40V VIN = 0 ±70 nA
4 Output voltage, IO = 10A VO 25°C ±16V RL = 1Ω 10 V
4 Output voltage, IO = 80mA VO 25°C ±45V RL = 500Ω 40 V
4 Output voltage, IO = 5A VO 25°C ±35V RL = 6Ω 30 V
4 Current limits ICL 25°C ±14V RL = 6Ω, RCL = 1Ω .6 .89 A
4 Stability/noise EN 25°C ±40V RL = 500Ω, CL = 1.5nF, / 1 1 mV
4 Slew rate SR 25°C ±40V RL = 500Ω 2.5 10 V/µs
4 Open loop gain AOL 25°C ±40V RL = 500Ω, F = 10Hz 96 dB
4 Common mode rejection CMR 25°C ±15V RL = 500Ω, F = DC, VCM = ±9V 74 dB
6 Output voltage, IO = 8A VO –55°C ±14V RL = 1Ω 8 V
6 Output voltage, IO = 80mA VO –55°C ±45V RL = 500Ω 40 V
6 Stability/noise EN –55°C ±40V RL = 500Ω, CL = 1.5nF, / 1 1 mV
6 Slew rate SR –55°C ±40V RL = 500Ω 2.5 10 V/µs
6 Open loop gain AOL –55°C ±40V RL = 500Ω, F = 10Hz 96 dB
6 Common mode rejection CMR –55°C ±15V RL = 500Ω, F = DC, VCM = ±9V 74 dB
5 Output voltage, IO = 8A VO 125°C ±14V RL = 1Ω 8 V
5 Output voltage, IO = 80mA VO 125°C ±45V RL = 500Ω 40 V
5 Stability/noise EN 125°C ±40V RL = 500Ω, CL = 1.5nF, / 1 1 mV
5 Slew rate SR 125°C ±40V RL = 500Ω 2.5 10 V/µs
5 Open loop gain AOL 125°C ±40V RL = 500Ω, F = 10Hz 96 dB
5 Common mode rejection CMR 125°C ±15V RL = 500Ω, F = DC, VCM = ±9V 74 dB
BURN IN CIRCUIT
/ 1 Minimum gain recommendation is either G = +4 (non-
inverting) or G = –3 (inverting).
/ 2 Input signals are calculated to result in internal power
dissipation of approximately 2.1W at case temperature =
125°C.
/ 3 These components are used to stabilize device due to
poor hgh frequency characteristics of burn in board.
This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible inaccuracies or omissions. All specifications are subject to change without notice.
PA12MU REV K JULY 2002 © 2002 Apex Microtechnology Corp.
