SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS 1 1 1 1 1 1 1 Quiescent current Input offset voltage Input offset voltage Input offset voltage Input bias current, +IN Inout bias current,-IN Input offset current IQ VOS VOS VOS +IB -IB IOS 25C 25C 25C 25C 25C 25C 25C 40V 40V 10V 45V 40V 40V 40V VIN = 0, AV = 100, RCL = .1 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 50 6 12 7 30 30 30 mA mV mV mV nA nA nA 3 3 3 3 3 3 3 Quiescent current Input offset voltage Input offset voltage Input offset voltage Input bias current, +IN Input bias current,-IN Input offset current IQ VOS VOS VOS +IB -IB IOS -55C -55C -55C -55C -55C -55C -55C 40V 40V 10V 45V 40V 40V 40V VIN = 0, AV = 100, RCL = .1 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 100 11.2 17.2 12.2 115 115 115 mA mV mV mV nA nA nA 2 2 2 2 2 2 2 Quiescent current Input offset voltage Input offset voltage Input offset voltage Input bias current, +IN Input bias current, -IN Input offset current IQ VOS VOS VOS +IB -IB IOS 125C 125C 125C 125C 125C 125C 125C 40V 40V 10V 45V 40V 40V 40V VIN = 0, AV = 100, RCL = .1 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 50 12.5 18.5 13.5 70 70 70 mA mV mV mV nA nA nA 4 4 4 4 4 4 4 4 Output voltage, IO = 10A Output voltage, IO = 80mA Output voltage, IO = 5A Current limits Stability/noise Slew rate Open loop gain Common mode rejection VO VO VO ICL EN SR AOL CMR 25C 25C 25C 25C 25C 25C 25C 25C 16V 45V 35V 14V 40V 40V 40V 15V RL = 1 RL = 500 RL = 6 RL = 6, RCL = 1 RL = 500, CL = 1.5nF, / 1 RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V 6 6 6 6 6 6 Output voltage, IO = 8A Output voltage, IO = 80mA Stability/noise Slew rate Open loop gain Common mode rejection VO VO EN SR AOL CMR -55C -55C -55C -55C -55C -55C 14V 45V 40V 40V 40V 15V RL = 1 RL = 500 RL = 500, CL = 1.5nF, / 1 RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V 5 5 5 5 5 5 Output voltage, IO = 8A Output voltage, IO = 80mA Stability/noise Slew rate Open loop gain Common mode rejection VO VO EN SR AOL CMR 125C 125C 125C 125C 125C 125C 14V 45V 40V 40V 40V 15V RL = 1 RL = 500 RL = 500, CL = 1.5nF, / 1 RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V BURN IN CIRCUIT 2.5 96 74 .89 1 10 8 40 2.5 96 74 1 10 V V mV V/s dB dB 1 10 V V mV V/s dB dB 8 40 2.5 96 74 V V V A mV V/s dB dB 10 40 30 .6 / 2 Input signals are calculated to result in internal power dissipation of approximately 2.1W at case temperature = 125C. / 1 Minimum gain recommendation is either G = +4 (noninverting) or G = -3 (inverting). /3 These components are used to stabilize device due to poor hgh frequency characteristics of burn in board. This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible inaccuracies or omissions. All specifications subject to change without notice. APEX MICROTECHNOLOGY CORPORATION * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 * ORDERS (520) 690-8601 * EMAIL are prodlit@apexmicrotech.com PA12MU REV K JULY 2002 (c) 2002 Apex Microtechnology Corp. 1