ZX80-B-5SA(30) - HIROSE ELECTRIC

2016.9③

Micro-USB connectors meeting USB 2.0 Standard

ZX Series

■Overview

Extremely small highly reliable connectors complying with

physical, electrical and environmental requirements of

Micro-USB standard (USB 2.0).

Receptacles and plugs are available in a wide variety of

mounting and termination styles, allowing their use in

various applications.

■Features

1. Size reduction

Compared with the standard Mini-USB connectors, the

size of ZX connectors is reduced by approximately 60%

while still allowing a high-speed data transfer of 480 Mbps,

specified in USB 2.0.

2. Receptacle styles

Two interface configurations: Micro-B and Micro-AB in

standard, mid-mount and reverse mounting styles.

SMT and through-hole (shell) PC board terminations.

3. Plug styles

Corresponding to the receptacle styles, two interface

configurations: Micro-A and Micro-B, with direct wire or

PCB wire soldering.

Several plug styles can be used for data transmission,

earphone or charging applications.

4. Smooth mating and unmating

A smooth mating and unmating operation results in less

wear and a longer product life. The unique Hirose active

latch mechanism produces a reliable and durable

connector.

Even after repeated use, the user will experience a

smooth click sensation when mating the connectors.

Note: The statement above only applies when using both

plug and receptacles made by Hirose Electric.

5. Hirose was the first company to obtain a

Micro-USB certification (TID number).

Note: Contact us to ascertain whether a TID number has

been acquired for an individual product.

Reverse

(Top mount)

Drop-in

(Mid-mount)

Standard

(Bottom mount)

USB 2.0 Hi-Speed (480 Mbps)

Eye diagram measurement results:

Measured with 2.4 m long USB 2.0 cable

500ps/div

200 mV/div

TP2

Fig.1

Fig.2

Fig.3

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

■Product Number Structure

Refer to the chart below when determining the product specifications from the product number.

Please select from the product numbers listed in this catalog when placing orders.

ZX 62 RD - B - 5 P * 8

ty u o

ty u i

ZX 40 - B - 5 S * - UNIT

ZX 40 - B - SLDA

●Receptacles

●Plugs

■Product Specifications

Ratings Current rating

1A (per contact) or

1.8A (contacts No. 1 and 5) and

0.5A (contacts No. 2, 3, and 4)

Voltage rating 30V AC

Operating temperature range

-30°C to +85°C (Note1)

Storage temperature range -30°C to +60°C

Item Specification Conditions

1. Contact resistance 30mø max. 100mA

2. Withstanding voltage No flashover or insulation breakdown 100V AC / 1 minute

3. Capacitance 2pF max.

Between adjacent contacts at 1,000Hz (AC voltage)

4. Durability

Contact resistance : Rise from initial value of 10mø max.

10,000 cycles

5. Total insertion/removal force

Insertion force : 35N max., Removal force : 8N min.

Mated with corresponding connector

Note1 : Includes temperature rise caused by current flow.

Note2 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications

for a specific part number shown.

■Materials / Finish

●Receptacles

Part Material Finish Remarks

Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0

Contacts Copper alloy Selective gold plated ---------------

Shell Stainless steel Tin alloy plating ---------------

●Plugs

Part Material Finish Remarks

Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0

Contacts Copper alloy Selective gold plated ---------------

Shell Stainless steel Tin alloy plating ---------------

qSeries name ZX

wTermination style 10's : Right-angle PCB wire, SMT

20's : Straight, PCB wire

40's : Direct wire

60's : Right-angle, PCB wire

80's : Cradle SMT

eBoard mounting style Blank

(Receptacles) D

Standard (Bottom mount)

Standard (Bottom mount) through hole

Reverse (Top mount)

Reverse (Top mount) through hole

Drop-in (Mid-mount)

rMating side configuration A

Micro-A

Micro-B

Micro-AB

tNumber of contacts 5

yContact type P

Receptacle- Male

Plug – Female

uSerial No.

iShell termination style – Blank

Receptacles 8

SMT

Through hole (solder tab length: 0.8mm)

oComponents-plugs UNIT Assembly (Insulator/contact/lock)

Cover (Note 1)

Note 1 : Classifiers such as A, B, and C are entered for *.

Micro-A

Micro-B

Micro-AB

Interface Receptacle Plug

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

■Configurations

Mating side

configuration

Type Part No. 3D Image Page

Receptacles

Micro-B

Standard

SMT ZX62-B-5PA(33) 4

SMT

DIP

ZX62D-B-5PA8(30) 4

Reverse SMT ZX62R-B-5P(30) 5

Drop-in SMT ZX62M-B-5P(30) 5

Micro-AB

Standard

SMT ZX62-AB-5PA(31) 6

SMT

DIP

ZX62D-AB-5P8(30) 6

Reverse

SMT ZX62R-AB-5P(30) 7

SMT

DIP

ZX62RD-AB-5P8(30) 7

Plugs

Micro-B

Direct wire soldering

Assembly

(insulator/contacts/lock) : ZX40-B-5S-UNIT(31)

Cover-top : ZX40-B-SLDA

Cover-bottom : ZX40-SLDB

9 and 10

PCB wire soldering

(straight, through hole)

Assembly

(insulator/contacts/lock) : ZX20-B-5S-UNIT(30)

Cover : ZX20-B-SLDC

PCB wire soldering

(SMT)

Assembly

(insulator/contacts/lock)

: ZX64-B-5S-UNIT(31)

Cover-top : ZX64-B-SLDA

Cover- bottom : ZX64-SLDB

12 and 13

PCB wire soldering

(SMT)

Assembly

(insulator/contacts/lock)

: ZX64-B-5S-UNIT(31)

Cover : ZX64-B-SLDC

12 and 13

Micro-A Direct wire soldering

Assembly

(insulator/contacts/lock) : ZX40-A-5S-UNIT(30)

Cover-top : ZX40-A-SLDA

Cover- bottom : ZX40-SLDB

14 and 15

Cradles

Micro-B

SMT

DIP

ZX80-B-5S(30) With lock 16

ZX80-B-5SA(30) Without lock 16

Note : 1 Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers.

Note : 2 Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors.

Note : 3 The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to

the Materials (Page 2) for correct colors.

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

■Receptacles

●Micro B - Standard (Bottom mount), Shell SMT

No.5

7.9 2.15

7.5

2.5

0.6 5

2.8

No.1

PCB EDGE

NO CONDUCTIVE

TRACES

0.5

4.3

6.2

9.8

1.6

No.5

1.45 3.35

1.9

1.35

0.4

1.3

2.6

4.1

8.3

No.1

BRecommended PCB mounting pattern

●Micro B - Standard (Bottom mount), Shell through hole

All dimensions : mm

4.85

2.6

0.65

1.25(LAND)

2.9

0.85(TH)

0.2

NO CONDUCTIVE TRACES

R0.325(TH)

R0.325(TH) 0.5

1.3

1.9

2.75 3.35

1.5(TH)

4.1

5.2

7.2

9.4

PCB EDGE

0.5(TH)

R0.3(TH)

0.1

R0.525(LAND)

1.05(LAND)

0.4 0.65(TH)

1.35

No.5

R0.5(LAND)

No.1

No.1 No.5

7.2

2.50.8

7.5

4.85

0.6 5

2.15 2.9

BRecommended PCB mounting pattern

All dimensions : mm

Part No. HRS No. Packaging

ZX62-B-5PA(33) 242-0033-8 33 3,500pcs/reel

Part No. HRS No. Packaging

ZX62D-B-5PA8(30) 242-0056-3 30 2,000pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

PCB EDGE

No.1 No.5

0.4

R0.4

3.6

2.4

4.3

6.9

2.6

1.3

7.8

8.8

1.9

7.15

5.15

2.4

1.4

1.05

1.5

4.7

C0.3

No.5

No.1

4.8

4.7

0.25

1.3

2.6

7.5

11.5

7.5

0.6

1.25 1.23

2.74

4.3

5.3

1.9

BRecommended PCB mounting pattern

No.5

NO CONDUCTIVE TRACES

1.35

1.3

4.1

8.3

1.9

2.9

0.43

3.35

No.1

1.45

2.6

0.4

5.6

9.8

3.9

6.6

0.5 No.5 No.1

7.5

8.8

2.5

2.15

0.6 5

BRecommended PCB mounting pattern

■Receptacles

●Micro B - Reverse (Top mount) Shell SMT

●Micro B - Drop-in (Mid-mount), Shell SMT

All dimensions : mm

Part No. HRS No. Packaging

ZX62R-B-5P(30) 242-0028-8 30 2,000pcs/reel

Part No. HRS No. Packaging

ZX62M-B-5P(30) 242-0024-7 30 1,500pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

No.1 No.5

0.5

1.3

1.9

1.45

3.35

1.35

2.6

0.4

6.2

9.8

4.3

1.6

8.3

4.1

PCB EDGE

8.8 No.5No.1

7.5

2.5

2.8

2.15

50.6

NO CONDUCTIVE TRACES

BRecommended PCB mounting pattern

■Receptacles

●Micro AB - Standard (Bottom mount), Shell SMT

0.6

8.35

7.5

2.5

No.5No.1

4.45

0.6

2.025 3.125

2.8

1.3 1.7

1.5

0.65(TH)

1.05(LAND)

R0.45(LAND)

R0.25(TH)

0.4

2.6

4.45

1.35

1.9

3.4752.625

4.1

5.2

(0.5)

(0.325)

9.4

0.5

1.5(TH)

R0.3(TH)

R0.5(LAND)

7.35(TH)

9(TH)

1.3

0.85(TH)

1.25(LAND)

3.125

No.5

No.1

PCB EDGE

NO CONDUCTIVE TRACES

BRecommended PCB mounting pattern

●Micro AB - Standard (Bottom mount), Shell through hole

All dimensions : mm

All dimensions: mm

Part No. HRS No. Packaging

ZX62-AB-5PA(31) 242-0045-7 31 3,500pcs/reel

Part No. HRS No. Packaging

ZX62D-AB-5P8(30) 242-0027-5 30 2,000pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

2.9

4-R0.4

4.1

8.3

4.75

0.85

0.43

1.45

2.6

1.3

1.35

0.4

0.5

1.6

9.8

6.6

3.35

1.9

NO CONDUCTIVE TRACES

No.5 No.1

PCB EDGE

No.5 No.1

0.6 5

2.15

8.8

2.5

7.5

BRecommended PCB mounting pattern

■Receptacles

●Micro AB - Reverse (Top mount), Shell SMT

All dimensions : mm

0.6

PCB EDGE

NO CONDUCTIVE TRACES

9.4

No.5

R0.25(TH)

No.1

9(TH)

7.35(TH)

6.6

4.45

2.6

1.3

0.4

1.05(LAND)

R0.2MAX

R0.45(LAND)

0.65(TH)

1.35

1.5

1.7

3.475

R0.5(LAND)

2.625

1.9

1.5(TH)

1.3

0.85

2.9

4.75

(0.5)

(0.325)

R0.3(TH)

3.125

0.555 1.25(LAND)

0.85(TH)

8.35

2.5

7.5 No.1No.5

4.45

50.6

2.025

3.125

BRecommended PCB mounting pattern

●Micro AB - Reverse (Top mount), Shell through hole

All dimensions: mm

Part No. HRS No. Packaging

ZX62R-AB-5P(30) 242-0035-3 30 2,000pcs/reel

Part No. HRS No. Packaging

ZX62RD-AB-5P8(30)

242-0025-0 30 2,000pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

Plugs – assembled (not-terminated, without overmold)

Components

ZX40-SLDB

ZX40-*-SLDA

Cover-top

ZX40-*-5S-UNIT

Assembly (insulator/

contacts/lock)

*No PCB required

Cover-bottom

Cover

ZX20-*-SLDC

Assembly

(insulator/contacts/lock)

* Vertical through hole PCB

termination

ZX20-*-5S-UNIT

ZX20 - PCB wire soldering

Cover-bottom

ZX64-SLDB

Cover-top

Assembly (insulator/

contacts/lock)

* Right angle through hole

PCB termination

ZX64-*-5S-UNIT

ZX64-*-SLDA

ZX64 - PCB wire soldering

ZX40 - Direct wire soldering

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

●Micro B - Component, Cover-top - Direct wire soldering

22.6

1.8

6.85

■Plugs

●Micro B - Assembly (insulator/contacts/lock) – Direct wire soldering

14.1

7.9

No.1No.5

4.2

All dimensions : mm

Part No. HRS No. Packaging

ZX40-B-5S-UNIT(31) 242-0002-4 31 4,000pcs/reel

Contact HRS for Cable Termination Procedure Manual.

Part No. HRS No. Packaging

ZX40-B-SLDA 242-0003-7 4,000 pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

■Plugs

●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering

16.2

ZX40-SLDB ZX40-SLDB(3.3)

All dimensions : mm

22.6

6.85

8.6

4.75

1.8

●Assembled

All dimensions : mm

Part No. HRS No. Packaging Cable dia.

ZX40-SLDB 242-0004-0 4,000pcs/reel Ø3.8

ZX40-SLDB(3.3) 242-0023-4 Ø3.3

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

All dimensions : mm

■Plugs

●

Micro B - Assembly (insulator/contacts/lock) - Vertical through hole PCB wire soldering (non-direct)

All dimensions : mm

1.3

2.6

5-0.15

1.4

12.2

1.55

0.35

7.9

No.1No.5

3.975

4.2

1.3

2.6

8.2

1.2(Through hole)

0.6(Through hole)

1.55

10.25

5-Ø0.7(Through hole)

5-Ø1.1(Land)

R0.3(Through hole)

1(Land)

1.6(Land)

R0.5(Land)

No.1 No.5

PCB mounting pattern

*PCB required (not supplied)

Max. thickness: 0.6mm

●Micro B - Component, Cover - through hole

4.4

8.4

2-0.2

8.2

2.6

1.3

12.2

1.55

1.8

0.35

0.6

1.4

6.85

5-0.15

Assembly

(insulator/contacts/lock) Cover

●Assembled

Part No. HRS No. Packaging

ZX20-B-SLDC 242-0022-1 4,000 pcs/reel

Part No. HRS No. Packaging

ZX20-B-5S-UNIT(30) 242-0012-8 30 4,000pcs/pks

Contact HRS for Cable Termination Procedure Manual.

1.1

8.2

2-0.2

0.6

6.85

1.8

12.1

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

16.1

1.3

2.6

5-0.15

3.7

7.9 No.1No.5

■Plugs

●Micro B - Assembly (insulator/contacts/lock) - Right angle SMT

All dimensions : mm

No.1

No.5

1.3

2.6

6.8

0.5

1.1

1.5

0.35

PCB mounting pattern

*PCB required (not supplied)

Max. thickness: 1.0mm

●Micro B - Component, Cover-top – Right angle SMT

24.7

6.85

1.8

All dimensions : mm

Part No. HRS No. Packaging

ZX64-B-SLDA 242-0013-0 4,000 pcs/reel

Part No. HRS No. Packaging

ZX64-B-5S-UNIT(31) 242-0009-3 31 1 piece

Contact HRS for Cable Termination Procedure Manual.

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

24.7

4.1

8.4

6.85

1.8

Assembly

(insulator/contacts/lock) Cover-top

Cover-bottom

●Assembled

■Plugs

●Micro B - Component, Cover-bottom - Right angle SMT

18.25

All dimensions : mm

Part No. HRS No. Packaging

ZX64-SLDB 242-0049-8 4,000 pcs/reel

16.1

6.85

8.4

4.1

1.8

Assembly

(insulator/contacts/lock) Cover-top

Cover-bottom

●Assembled

All dimensions : mm

6.85

1.8

16.1

●Micro B - Component, Shell/cover – Right angle SMT

Shell/cover, without cable clamp

This shell/cover does not require ZX64-SLDB.

Part No. HRS No. Packaging

ZX64-B-SLDC 242-0018-4 4,000 pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

22.6

1.8

6.85

●Micro A - Component, Cover-top - Direct wire soldering

All dimensions : mm

■Plugs

●Micro A - Assembly (insulator/contacts/lock) - Direct wire soldering

12.4

7.9

4.2

No.1No.5

Contacts

Insulator body (color grey)

All dimensions : mm

Part No. HRS No. Packaging

ZX40-A-SLDA 242-0011-5 4,000pcs/reel

Part No. HRS No. Packaging

ZX40-A-5S-UNIT(30) 242-0010-2 30 1 piece

Contact HRS for Cable Termination Procedure Manual.

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

4.75

22.6

6.85

8.6

1.8

Assembly

(insulator/contacts/lock) Cover-top

Cover-bottom

●Assembled

■Plugs

●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering

16.2

ZX40-SLDB ZX40-SLDB(3.3)

All dimensions : mm

Part No. HRS No. Packaging Cable dia.

ZX40-SLDB 242-0004-0 4,000pcs/reel Ø3.8

ZX40-SLDB(3.3) 242-0023-4 Ø3.3

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

8-R0.25

Contact No.5

Contact No.1

2-Ø2.2(Hole)

16.55

0.37

8-R0.55

3.15

1.3(Through hole)

1.9(Land)

1.1(Land)

0.5(Through hole)

1.86

1.3

2.6

6.65

1.6(Through hole)

0.5(Through hole)

0.4

2.9

2.2

1.1(Land)

2.2(Land)

●Micro B, without lock

6.85

No.5 No.1

2-0.2

6.65

1.3

2.6

5-0.15

1.88

2.78

2.42

0.37

2.32

3.52

16.55

20.55

2.5

7.1

13 1.15

1.86

3.15

0.7

R1.6

8.55

BPCB mounting pattern

■Plug-Vertical, cradle mount, Shell through hole

●Micro B, with lock

6.85

No.1

No.5

2-0.2

6.65

1.3

2.6

5-0.15

1.88

2.78

2.42

0.37

2.32

3.52

16.55

20.55

2.5

7.1

13 1.15

1.86

3.15

0.7

R1.6

8.55

All dimensions : mm

Part No. HRS No. Packaging

ZX80-B-5S(30) 242-0017-1 30 100pcs/pks

Part No. HRS No. Packaging

ZX80-B-5SA(30) 242-0019-7 30 100 pcs/pks

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

BPrecautions

1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating.

2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable.

3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected.

4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function.

BRecommended Temperature Profile - Receptacles

●Using lead-free solder paste

(ç)

250 240ç

230çmin

180ç

150ç

200

150

100

60S 30S

The temperature profile is based on the left

conditions.

In individual applications the actual temperature

may vary, depending on solder paste type, volume/

thickness and board size/thickness. Contact your

solder paste and equipment manufacturer for

specific recommendations.

Note 1 : Up to 2 cycles of Reflow soldering are

possible under the same conditions, provided

that there is a return to normal temperature

between the first and second cycle.

Note 2 : The temperature profile indicates the board

surface temperature at the point of contacts

with the connector terminals.

BPackaging Specifications

B 1.75

4 0.5

Ø1.5

Unreeling direction

●Embossed carrier tape dimensions

Ø13

Ø380

Unreeling direction

Part No. A dimension B dimension

ZX62-B-5PA(33) 24 11.5

ZX62-AB-5PA(31) 24 11.5

ZX62M-B-5P(30) 24 11.5

Other 16 7.5

Part No. D dimension E dimension

ZX62-B-5PA(33) 30.4 24.4

ZX62-AB-5PA(31) 30.4 24.4

ZX62M-B-5P(30) 30.4 24.4

Other 22.4 16.4

●Reel Dimensions

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

MEMO :

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

MEMO :

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 09/2016. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE

2841 Junction Ave, Suite 200

San Jose, CA. 95134

Phone : +1-408-253-9640

Fax : +1-408-253-9641

http://www.hirose.com/us/

USA:

HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)

17197 N. Laurel Park Drive, Suite 253,

Livonia, MI 48152

Phone : +1-734-542-9963

Fax : +1-734-542-9964

http://www.hirose.com/us/

USA:

HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE

2300 Warrenville Road, Suite 150,

Downers Grove, IL 60515

Phone : +1-630-282-6700

http://www.hirose.com/us/

CHINA:

HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.

Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851

Fax : +86-755-8207-0873

http://www.hirose.com/cn/

KOREA:

HIROSE KOREA CO.,LTD.

250, Huimanggongwon-ro, Siheung-si,

Gyeonggi-do, Korea, 15083

Phone : +82-31-496-7000 or 7124

Fax : +82-31-496-7100

http://www.hirose.co.kr/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE

Neumeyerstrasse 22-26, 90411 Nurnberg

Phone : +49-911 32 68 89 63

Fax : +49-911 32 68 89 69

http://www.hirose.com/eu/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE

Bayernstr. 3, Haus C 30855 Langenhagen, Germany

Phone : +49-511 97 82 61 30

Fax : +49-511 97 82 61 35

http://www.hirose.com/eu/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH

Schoenbergstr. 20, 73760 ostfildern

Phone : +49-711-456002-1

Fax : +49-711-456002-299

http://www.hirose.com/eu/

FRANCE:

HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

Regus La Garenne Colombes,Place de La Belgique,

71 Boulevard National La Garenne Colombes, 92250, France

Phone : +33 (0) 1 7082 3170

Fax : +33 (1) 7082 3101

http://www.hirose.com/eu/

THE NETHERLANDS:

HIROSE ELECTRIC EUROPE B.V.

Hogehillweg #8 1101 CC Amsterdam Z-O

Phone : +31-20-6557460

Fax : +31-20-6557469

http://www.hirose.com/eu/

UNITED KINGDOM:

HIROSE ELECTRIC EUROPE BV (UK BRANCH)

4 Newton Court, Kelvin Drive, Knowlhill,

Milton Keynes, MK5 8NH

Phone : +44-1908 202050

Fax : +44-1908 202058

http://www.hirose.com/eu/

CHINA:

HIROSE ELECTRIC (SHANGHAI) CO., LTD.

1601, Henderson Metropolitan, NO.300, East Nanjing

Road, Huangpu District, Shanghai, China 200001

Phone : +86-21-6391-3355

Fax : +86-21-6391-3335

http://www.hirose.com/cn/

CHINA:

HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH

A1001, Ocean International Center, Building 56# East 4th

Ring Middle Road, ChaoYang District, Beijing, 100025

Phone : +86-10-5165-9332

Fax : +86-10-5908-1381

http://www.hirose.com/cn/

TAIWAN:

HIROSE ELECTRIC TAIWAN CO., LTD.

103 8F, No.87, Zhengzhou Rd., Taipei

Phone : +886-2-2555-7377

Fax : +886-2-2555-7350

http://www.hirose.com/tw/

HONG KONG:

HIROSE ELECTRIC HONGKONG TRADING CO., LTD.

Room 1001, West Wing, Tsim Sha Tsui Centre, 66

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong

Phone : +852-2803-5338

Fax : +852-2591-6560

http://www.hirose.com/hk/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE

Office NO.552, Regus-Green Boulevard, Level5, Tower C,

Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India

Phone : +91-12-660-8018

Fax : +91-120-4804949

http://www.hirose.com/sg/

SINGAPORE:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

10 Anson Road #26-16, International Plaza

079903, Singapore

Phone : +65-6324-6113

Fax : +65-6324-6123

http://www.hirose.com/sg/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE

Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma

Gandhi (MG) Road, Bangalore 560 001, Karnataka, India

Phone : +91-80-4120 1907

Fax : +91-80-4120 9908

http://www.hirose.com/sg/

MALAYSIA:

PENANG REPRESENTATIVE OFFICE

1-21-01, Suntech @ Penang Cybercity (1164), Lintang

Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.

Phone : +604-619-2564

Fax : +604-619-2574

http://www.hirose.com/sg/

THAILAND:

BANGKOK OFFICE (REPRESENTATIVE OFFICE)

Unit 4703, 47th FL., 1 Empire Tower, South Sathorn

Road, Yannawa, Sathorn, Bangkok 10120 Thailand

Phone : +66-2-686-1255

Fax : +66-2-686-3433

http://www.hirose.com/sg/