33
TPM Multianode
Tantalum Ultra Low ESR Capacitor
HOW TO ORDER
Low ESR, high capacitance and high ripple
current are the key parameters for processor
filtering. Multianode configuration within a
standard E case package meets these
requirements. Parameters such as ESR
15mΩ, capacitance 1500µF and ripple
current above 4A rms makes TPM series
ready to use with the latest processor
families.
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 10µF to 1500µF
Capacitance Tolerance: ±10%, ±20%
Leakage Current DCL: 0.1CV
Rated Voltage (VR)+85°C: 2.5 4 6.3 10 16 20 25 35 50
Category Voltage (VC) +125°C: 1.7 2.7 4 7 10 13 17 23 33
Surge Voltage (VS) +85°C: 3.3 5.2 8 13 20 26 32 46 65
Surge Voltage (VS) +125°C: 2.2 3.4 5 8 13 16 20 28 40
Temperature Range: -55°C to +125°C
Reliability: 1% per 1000 hours at 85°C, VRwith 0.1Ω/V series impedance, 60% confidence level
TECHNICAL SPECIFICATIONS
CASE DIMENSIONS: millimeters (inches)
Code EIA L±0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) W1±0.20 (0.008) A+0.30 (0.012) S Min.
Code -0.10 (0.004) -0.10 (0.004) -0.20 (0.008)
E7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
V7361-38 7.30 (0.287) 6.10 (0.240) 3.45 ±0.30 3.10 (0.120) 1.40 (0.055) 4.40 (0.173)
(0.136 ±0.012)
W1dimension applies to the termination width for A dimensional area only.
TPM
Type
E
Case Size
See table
above
108
Capacitance Code
pF code: 1st two
digits represent
significant figures,
3rd digit represents
multiplier (number of
zeros to follow)
*
Capacitance
Tolerance
K=±10%
M=±20%
004
Rated DC Voltage
002=2.5Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
035=35Vdc
050=50Vdc
R
Packaging
R = 7" T/R
S = 13" T/R
Y = Lead Free
7" Reel
P = Lead Free
13" Reel
0018
Maximum ESR
in Milliohms
See note below
NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors
allow an ESR movement to 1.25 times catalog limit post mounting.
For part marking see page 114
34
TPM Multianode
Tantalum Ultra Low ESR Capacitor
CAPACITANCE AND RATED VOLTAGE RANGE
LETTER DENOTES CASE SIZE ESR LIMIT IN BRACKETS
Developmental Ratings - subject to change, AVX reserve rights to change ESR specification prior to release.
Capacitance Rated Voltage DC (VR) to 85°C
µF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
10 106 E(120)
15 156 E
22 226 E(60,100) E
33 336 E(50,65)
47 476 E(55,65)
68 686 E(45,55) V
100 107 E(35,45) E
150 157 E(30,40) E
220 227 E(25,40)
330 337 E(23,35) E
470 477 E(18,23,30) E(23,30)
680 687 E(18,23) E(18,23), V(23) E
1000 108 E(18,23), V(18) E
1500 158 E(12,15,18) E(15,18)
2200 228 E(18,25)
35
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz,
0.5V RMS with maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
TPM MULTIANODE CONSTRUCTION
TPM Multianode
Tantalum Ultra Low ESR Capacitor
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
2.5 Volt @ 85°C (1.7 Volt @ 125°C)
TPME158*002#0012 E 1500 2.5 38 6 12 4.743 4.269 1.897 0.057 0.051 0.023
TPME158*002#0015 E 1500 2.5 38 6 15 4.243 3.818 1.697 0.064 0.057 0.025
TPME158*002#0018 E 1500 2.5 38 6 18 3.873 3.486 1.549 0.070 0.063 0.028
4 Volt @ 85°C (2.7 Volt @ 125°C)
TPME687*004#0018 E 680 4 27 6 18 3.873 3.486 1.549 0.070 0.063 0.028
TPME687*004#0023 E 680 4 27 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPME108*004#0018 E 1000 4 40 6 18 3.873 3.486 1.549 0.070 0.063 0.028
TPME108*004#0023 E 1000 4 40 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPMV108*004#0018 V 1000 4 40 6 18 3.979 3.581 1.592 0.072 0.064 0.029
TPME158*004#0015 E 1500 4 40 6 15 4.243 3.818 1.697 0.064 0.057 0.025
TPME158*004#0018 E 1500 4 40 6 18 3.873 3.486 1.549 0.070 0.063 0.028
6.3 Volt @ 85°C (4 Volt @ 125°C)
TPME477*006#0018 E 470 6.3 28 6 18 3.873 3.486 1.549 0.070 0.063 0.028
TPME477*006#0023 E 470 6.3 28 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPME477*006#0030 E 470 6.3 28 6 30 3.000 2.700 1.200 0.090 0.081 0.036
TPME687*006#0018 E 680 6.3 41 6 18 3.873 3.486 1.549 0.070 0.063 0.028
TPME687*006#0023 E 680 6.3 41 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPMV687*006#0023 V 680 6.3 41 6 23 3.520 3.168 1.408 0.081 0.073 0.032
10 Volt @ 85°C (7 Volt @ 125°C)
TPME337*010#0023 E 330 10 33 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPME337*010#0035 E 330 10 33 6 35 2.777 2.500 1.111 0.097 0.087 0.039
TPME477M010#0023 E 470 10 47 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPME477M010#0030 E 470 10 47 6 30 3.000 2.700 1.200 0.090 0.081 0.036
16 Volt @ 85°C (10 Volt @ 125°C)
TPME157*016#0030 E 150 16 24 6 30 3.000 2.700 1.200 0.090 0.081 0.036
TPME157*016#0040 E 150 16 24 6 40 2.598 2.338 1.039 0.104 0.094 0.042
TPME227*016#0025 E 220 16 35 6 25 3.286 2.958 1.315 0.082 0.074 0.033
TPME227*016#0040 E 220 16 35 6 40 2.598 2.338 1.039 0.104 0.094 0.042
20 Volt @ 85°C (13 Volt @ 125°C)
TPME107*020#0035 E 100 20 20 6 35 2.777 2.500 1.111 0.097 0.087 0.039
TPME107*020#0045 E 100 20 20 6 45 2.449 2.205 0.980 0.110 0.099 0.044
25 Volt @ 85°C (17 Volt @ 125°C)
TPME686*025#0045 E 68 25 17 6 45 2.449 2.205 0.980 0.110 0.099 0.044
TPME686*025#0055 E 68 25 17 6 55 2.216 1.994 0.886 0.122 0.110 0.049
35 Volt @ 85°C (23 Volt @ 125°C)
TPME226*335#0060 E 22 35 8 6 60 2.121 1.909 0.849 0.127 0.115 0.051
TPME226*035#0100 E 22 35 8 6 100 1.643 1.479 0.657 0.164 0.148 0.066
TPME336*035#0050 E 33 35 12 6 50 2.324 2.091 0.930 0.116 0.105 0.046
TPME336*035#0065 E 33 35 12 6 65 2.038 1.834 0.815 0.132 0.119 0.053
TPME476*035#0055 E 47 35 16 6 55 2.216 1.994 0.886 0.122 0.110 0.049
TPME476*035#0065 E 47 35 16 6 65 2.038 1.834 0.815 0.132 0.119 0.053
50 Volt @ 85°C (33 Volt @ 125°C)
TPME106*050#0120 E 10 50 5 6 120 1.500 1.350 0.600 0.180 0.162 0.072
