Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ NHG
– EE114 –
φ5toφ8
φD±0.5
φd±0.05
F±0.5
Sleeve
14 min.
3 min.
L
L<16:L±1.0
L>20:L±2.0
Pressure relief
φ6.3<+
φ10<
φD±0.5
Features
Endurance : 105 °C 1000 h to 2000 h
RoHS directive compliant
Radial Lead Type
Series: NHG Type: A
Specifi cations
Category Temp. Range 55 °C to +105 °C –25 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 10 0 V.DC 160 V.DC to 450 V.DC
Nominal Cap. Range 0.1 µF to 22000 µF 1.0 µF to 330 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes
(Which is greater) I < 0.06 CV +10 (µA) After 2 minutes
tan δPlease see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration : 6.3 V.DC to 100 V.DC : (φ5 to φ8)=1000 hours, (φ
10 to φ
18)=2000 hours
160 V.DC to 450 V.DC : 2000 hours
Capacitance change ±20 % of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Di men sions in mm (not to scale)
W.V.(V.DC) Cap. (µF) Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 100
0.1 to 33 0.75 1.00 1.55 1.80 2.00
47 to 470 0.80 1.00 1.35 1.50 1.50
1000 to 22000 0.85 1.00 1.10 1.15 1.15
160 to 450 1 to 330 0.80 1.001.351.501.50
Frequency correction factor for ripple current
(mm)
Body Dia. φD5 6.3 8 1012.516 18
Lead Dia. φd0.50.50.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
[mm]
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ NHG
– EE115 –
Standard Prod ucts
W.V. Cap.
20 %)
Case size Specication Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
B
Taping
i
(V) (µF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
6.3
220 5 11 140 0.28 1000 0.5 2.0 5.0 2.5 ECA0JHG221( ) 200 2000
470 6.3 11.2 2300.281000 0.5 2.5 5.0 2.5 ECA0JHG471( ) 200 2000
1000 8 11.5 380 0.28 1000 0.6 3.5 5.0 ECA0JHG102( ) 200 1000
2200 10 16 710 0.302000 0.6 5.0 5.0 ECA0JHG222( ) 200 500
3300 10 20 840 0.322000 0.6 5.0 5.0 ECA0JHG332( ) 200 500
4700 12.5 20 1090 0.34 2000 0.6 5.0 5.0 ECA0JHG472( ) 200 500
6800 12.5 25 1350 0.38 2000 0.6 5.0 5.0 ECA0JHG682( ) 200 500
10000 16 25 1650 0.46 2000 0.8 7.5 7.5 ECA0JHG103( ) 100 250
15000 16 31.5 2010 0.56 2000 0.8 7.5 ECA0JHG153 100
22000 18 35.5 2350 0.70 2000 0.8 7.5 ECA0JHG223 50
10
330 6.3 11.2 2000.241000 0.5 2.5 5.0 2.5 ECA1AHG331( ) 200 2000
470 8 11.5 250 0.241000 0.6 3.5 5.0 ECA1AHG471( ) 200 1000
1000 10 12.5 460 0.24 2000 0.6 5.0 5.0 ECA1AHG102( ) 200 500
2200 10 20 760 0.262000 0.6 5.0 5.0 ECA1AHG222( ) 200 500
3300 12.5 20 1000 0.28 2000 0.6 5.0 5.0 ECA1AHG332( ) 200 500
4700 12.5 25 1260 0.30 2000 0.6 5.0 5.0 ECA1AHG472( ) 200 500
6800 16 25 1570 0.34 2000 0.8 7.5 7.5 ECA1AHG682( ) 100 250
10000 16 31.5 1890 0.42 2000 0.8 7.5 ECA1AHG103 100
15000 18 35.5 2180 0.52 2000 0.8 7.5 ECA1AHG153 50
16
100 5 11 110 0.20 1000 0.5 2.0 5.0 2.5 ECA1CHG101( ) 200 2000
220 6.3 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 ECA1CHG221( ) 200 2000
330 8 11.5 260 0.201000 0.6 3.5 5.0 ECA1CHG331( ) 200 1000
470 8 11.5 310 0.201000 0.6 3.5 5.0 ECA1CHG471( ) 200 1000
1000 10 16 560 0.20 2000 0.6 5.0 5.0 ECA1CHG102( ) 200 500
2200 12.5 20 920 0.222000 0.6 5.0 5.0 ECA1CHG222( ) 200 500
3300 12.5 25 1170 0.24 2000 0.6 5.0 5.0 ECA1CHG332( ) 200 500
4700 16 25 1480 0.26 2000 0.8 7.5 7.5 ECA1CHG472( ) 100 250
6800 16 31.5 1780 0.30 2000 0.8 7.5 ECA1CHG682 100
10000 18 35.5 2060 0.38 2000 0.8 7.5 ECA1CHG103 50
25
47 5 11 91 0.161000 0.5 2.0 5.0 2.5 ECA1EHG470( ) 200 2000
100 6.3 11.2 130 0.161000 0.5 2.5 5.0 2.5 ECA1EHG101( ) 200 2000
220 8 11.5 230 0.161000 0.6 3.5 5.0 ECA1EHG221( ) 200 1000
330 8 11.5 310 0.161000 0.6 3.5 5.0 ECA1EHG331( ) 200 1000
470 10 12.5 380 0.16 2000 0.6 5.0 5.0 ECA1EHG471( ) 200 500
1000 10 20 680 0.16 2000 0.6 5.0 5.0 ECA1EHG102( ) 200 500
2200 12.5 25 1090 0.18 2000 0.6 5.0 5.0 ECA1EHG222( ) 200 500
3300 16 25 1400 0.20 2000 0.8 7.5 7.5 ECA1EHG332( ) 100 250
4700 16 31.5 1750 0.22 2000 0.8 7.5 ECA1EHG472 100
6800 18 35.5 2040 0.26 2000 0.8 7.5 ECA1EHG682 50
35
47 5 11 90 0.141000 0.5 2.0 5.0 2.5 ECA1VHG470( ) 200 2000
100 6.3 11.2 150 0.141000 0.5 2.5 5.0 2.5 ECA1VHG101( ) 200 2000
220 8 11.5 270 0.141000 0.6 3.5 5.0 ECA1VHG221( ) 200 1000
330 10 12.5 350 0.14 2000 0.6 5.0 5.0 ECA1VHG331( ) 200 500
470 10 16 460 0.14 2000 0.6 5.0 5.0 ECA1VHG471( ) 200 500
1000 12.5 20 810 0.14 2000 0.6 5.0 5.0 ECA1VHG102( ) 200 500
2200 16 25 1260 0.16 2000 0.8 7.5 7.5 ECA1VHG222( ) 100 250
3300 16 31.5 1610 0.18 2000 0.8 7.5 ECA1VHG332 100
4700 18 35.5 1910 0.20 2000 0.8 7.5 ECA1VHG472 50
When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ NHG
– EE116 –
Standard Prod ucts
W.V. Cap.
20 %)
Case size Specication Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
B
Taping
i
(V) (µF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
50
0.1 5 11 1.1 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG0R1( ) 200 2000
0.22 5 11 2.3 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR22( ) 200 2000
0.33 5 11 3.5 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR33( ) 200 2000
0.47 5 11 5 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR47( ) 200 2000
15 11 100.121000 0.5 2.0 5.0 2.5 ECA1HHG010( ) 200 2000
2.2 5 11 18 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG2R2( ) 200 2000
3.3 5 11 22 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG3R3( ) 200 2000
4.7 5 11 26 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG4R7( ) 200 2000
10 5 11 39 0.121000 0.5 2.0 5.0 2.5 ECA1HHG100( ) 200 2000
22 5 11 65 0.121000 0.5 2.0 5.0 2.5 ECA1HHG220( ) 200 2000
33 5 11 90 0.121000 0.5 2.0 5.0 2.5 ECA1HHG330( ) 200 2000
47 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5 ECA1HHG470( ) 200 2000
100 8 11.5 180 0.121000 0.6 3.5 5.0 ECA1HHG101( ) 200 1000
220 10 12.5 300 0.12 2000 0.6 5.0 5.0 ECA1HHG221( ) 200 500
330 10 16 410 0.12 2000 0.6 5.0 5.0 ECA1HHG331( ) 200 500
470 10 20 530 0.12 2000 0.6 5.0 5.0 ECA1HHG471( ) 200 500
1000 12.5 25 950 0.12 2000 0.6 5.0 5.0 ECA1HHG102( ) 200 500
2200 16 31.5 1470 0.14 2000 0.8 7.5 ECA1HHG222 100
3300 18 35.5 1770 0.16 2000 0.8 7.5 ECA1HHG332 50
63
10 5 11 46 0.101000 0.5 2.0 5.0 2.5 ECA1JHG100( ) 200 2000
22 5 11 71 0.101000 0.5 2.0 5.0 2.5 ECA1JHG220( ) 200 2000
33 6.3 11.2 100 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG330( ) 200 2000
47 6.3 11.2 120 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG470( ) 200 2000
100 10 12.5 215 0.10 2000 0.6 5.0 5.0 ECA1JHG101( ) 200 500
220 10 16 335 0.10 2000 0.6 5.0 5.0 ECA1JHG221( ) 200 500
330 10 20 510 0.10 2000 0.6 5.0 5.0 ECA1JHG331( ) 200 500
470 12.5 20 640 0.10 2000 0.6 5.0 5.0 ECA1JHG471( ) 200 500
1000 16 25 930 0.10 2000 0.8 7.5 7.5 ECA1JHG102( ) 100 250
2200 18 35.5 1610 0.12 2000 0.8 7.5 ECA1JHG222 50
100
0.47 5 11 9 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHGR47( ) 200 2000
15 11 140.08 1000 0.5 2.0 5.0 2.5 ECA2AHG010( ) 200 2000
2.2 5 11 21 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG2R2( ) 200 2000
3.3 5 11 31 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG3R3( ) 200 2000
4.7 5 11 38 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG4R7( ) 200 2000
10 6.3 11.2 54 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG100( ) 200 2000
22 6.3 11.2 93 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG220( ) 200 2000
When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ NHG
– EE117 –
Standard Prod ucts
W.V. Cap.
20 %)
Case size Specication Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
B
Taping
i
(V) (µF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
100
33 8 11.5 130 0.08 1000 0.6 3.5 5.0 ECA2AHG330( ) 200 1000
47 10 12.5 165 0.08 2000 0.6 5.0 5.0 ECA2AHG470( ) 200 500
100 10 20 265 0.08 2000 0.6 5.0 5.0 ECA2AHG101( ) 200 500
220 12.5 25 440 0.08 2000 0.6 5.0 5.0 ECA2AHG221( ) 200 500
330 16 25 540 0.08 2000 0.8 7.5 7.5 ECA2AHG331( ) 100 250
470 16 25 715 0.08 2000 0.8 7.5 7.5 ECA2AHG471( ) 100 250
1000 18 35.5 985 0.08 2000 0.8 7.5 ECA2AHG102 50
160
16.311.2 170.152000 0.5 2.5 5.0 2.5 ECA2CHG010( ) 200 2000
2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG2R2( ) 200 2000
3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG3R3( ) 200 2000
4.7 6.3 11.2 43 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG4R7( ) 200 2000
10 10 12.5 70 0.15 2000 0.6 5.0 5.0 ECA2CHG100( ) 200 500
22 10 20 130 0.15 2000 0.6 5.0 5.0 ECA2CHG220( ) 200 500
33 10 20 180 0.15 2000 0.6 5.0 5.0 ECA2CHG330( ) 200 500
47 12.5 20 220 0.152000 0.6 5.0 5.0 ECA2CHG470( ) 200 500
100 16 25 335 0.15 2000 0.8 7.5 7.5 ECA2CHG101( ) 100 250
220 16 31.5 540 0.15 2000 0.8 7.5 ECA2CHG221 100
330 18 31.5 705 0.15 2000 0.8 7.5 ECA2CHG331 50
200
16.311.2 170.152000 0.5 2.5 5.0 2.5 ECA2DHG010( ) 200 2000
2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG2R2( ) 200 2000
3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG3R3( ) 200 2000
4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 ECA2DHG4R7( ) 200 1000
10 10 16 80 0.15 2000 0.6 5.0 5.0 ECA2DHG100( ) 200 500
22 10 20 140 0.15 2000 0.6 5.0 5.0 ECA2DHG220( ) 200 500
33 12.5 20 190 0.152000 0.6 5.0 5.0 ECA2DHG330( ) 200 500
47 12.5 20 220 0.152000 0.6 5.0 5.0 ECA2DHG470( ) 200 500
100 16 25 335 0.15 2000 0.8 7.5 7. 5 2.5 ECA2DHG101( ) 100 250
220 18 31.5 575 0.15 2000 0.8 7.5 ECA2DHG221 50
250
16.311.2 170.152000 0.5 2.5 5.0 2.5 ECA2EHG010( ) 200 2000
2.2 6.3 11.2 29 0.15 2000 0.5 2.5 5.0 2.5 ECA2EHG2R2( ) 200 2000
3.3 8 11.5 42 0.15 2000 0.6 3.5 5.0 ECA2EHG3R3 200 1000
4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 ECA2EHG4R7( ) 200 1000
10 10 16 88 0.15 2000 0.6 5.0 5.0 ECA2EHG100( ) 200 500
22 12.5 20 155 0.152000 0.6 5.0 5.0 ECA2EHG220( ) 200 500
33 12.5 20 190 0.152000 0.6 5.0 5.0 ECA2EHG330( ) 200 500
47 12.5 25 230 0.152000 0.6 5.0 5.0 ECA2EHG470( ) 200 500
100 16 31.5 365 0.15 2000 0.8 7.5 ECA2EHG101 100
350
16.311.2 180.202000 0.5 2.5 5.0 2.5 ECA2VHG010( ) 200 2000
2.2 8 11.5 31 0.20 2000 0.6 3.5 5.0 ECA2VHG2R2( ) 200 1000
3.3 10 12.5 38 0.202000 0.6 5.0 5.0 ECA2VHG3R3( ) 200 500
4.7 10 16 50 0.20 2000 0.6 5.0 5.0 ECA2VHG4R7( ) 200 500
10 10 20 82 0.20 2000 0.6 5.0 5.0 ECA2VHG100( ) 200 500
22 12.5 20 130 0.202000 0.6 5.0 5.0 ECA2VHG220( ) 200 500
33 16 25 195 0.20 2000 0.8 7.5 7.5 ECA2VHG330( ) 100 250
47 16 25 230 0.20 2000 0.8 7.5 7.5 ECA2VHG470( ) 100 250
100 18 31.5 375 0.20 2000 0.8 7.5 ECA2VHG101 50
When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ NHG
– EE118 –
Standard Prod ucts
W.V. Cap.
20 %)
Case size Specication Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
B
Taping
i
(V) (µF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
400
16.311.2 180.242000 0.5 2.5 5.0 2.5 ECA2GHG010( ) 200 2000
2.2 8 11.5 30 0.24 2000 0.6 3.5 5.0 ECA2GHG2R2( ) 200 1000
3.3 10 12.5 40 0.242000 0.6 5.0 5.0 ECA2GHG3R3( ) 200 500
4.7 10 16 50 0.24 2000 0.6 5.0 5.0 ECA2GHG4R7( ) 200 500
10 10 20 80 0.24 2000 0.6 5.0 5.0 ECA2GHG100( ) 200 500
22 12.5 25 145 0.242000 0.6 5.0 5.0 ECA2GHG220( ) 200 500
33 16 25 195 0.24 2000 0.8 7.5 7.5 ECA2GHG330( ) 100 250
47 16 31.5 250 0.24 2000 0.8 7.5 ECA2GHG470 100
450
18 11.5 180.242000 0.6 3.5 5.0 ECA2WHG010( ) 200 1000
2.2 10 12.5 29 0.24 2000 0.6 5.0 5.0 ECA2WHG2R2( ) 200 500
3.3 10 16 41 0.24 2000 0.6 5.0 5.0 ECA2WHG3R3( ) 200 500
4.7 10 20 49 0.24 2000 0.6 5.0 5.0 ECA2WHG4R7( ) 200 500
10 12.5 20 75 0.24 2000 0.6 5.0 5.0 ECA2WHG100( ) 200 500
22 16 25 115 0.24 2000 0.8 7.5 7.5 ECA2WHG220( ) 100 250
33 16 31.5 155 0.24 2000 0.8 7.5 ECA2WHG330 100
When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.
Sep. 201000