2N6676, 2N6678, 2N6691, 2N6693 JAN SERIES
ELECTRICAL CHARACTERISTICS (con’t)
Characteristics Symbol Min. Max. Unit
Emitter-Base Cutoff Current
VEB = 8.0 Vdc IEBO
2.0 mAdc
Collector-Base Cutoff Current
VCB = 450 Vdc 2N6676, 2N6691
VCB = 650 Vdc 2N6678, 2N6693 ICBO
1.0
1.0 mAdc
ON CHARACTERISTICS (4)
Forward-Current Transfer Ratio
IC = 1.0 Adc; VCE = 3.0 Vdc
IC = 15 Adc; VCE = 3.0 Vdc hFE
15
8.0
40
20
Collector-Emitter Saturation Voltage
IC = 15 Adc; IB = 3.0 Adc VCE(sat) 1.0 Vdc
Base-Emitter Saturation Voltage
IC = 15 Adc; IB = 3.0 Adc VBE(sat) 1.5 Vdc
DYNAMIC CHARACTERISTICS
Small-Signal Short-Circuit Forward Current Transfer Ratio
IC = 1.0 Adc; VCE = 10 Vdc, f = 5 MHz hfe 3.0 10
Output Capacitance
VCB = 10 Vdc; IE = 0, 100 kHz ≤ f ≤ 1.0 MHz Cobo 150 500 pF
SWITCHING CHARACTERISTICS
Delay Time td 0.1 µs
Rise Time tr 0.6 µs
Storage Time ts 2.5 µs
Fall Time tf 0.5 µs
Cross-Over Time
See Figure 3 of MIL-PRF-19500/538
tc 0.5 µs
SAFE OPERATING AREA
DC Tests
TC = +250C, 1 Cycle, t = 1.0 s
Test 1
VCE = 11.7 Vdc, IC = 15 Adc All Types
Test 2
VCE = 30 Vdc, IC = 5.9 Adc 2N6676, 2N6678
Test 3
VCE = 100 Vdc, IC = 0.25 Adc All Types
Test 4
VCE = 25 Vdc, IC = 7.0 Adc 2N6691, 2N6693
Test 5
VCE = 300 Vdc, IC = 20 mAdc 2N6676, 2N6691
VCE = 400 Vdc, IC = 10 mAdc 2N6678, 2N6693
Clamped Switching
TA = 250C; VCC = 15 Vdc
IC = 15 Adc; Clamped Voltage = 350 Vdc 2N6676, 2N6691
IC = 15 Adc; Clamped Voltage = 450 Vdc 2N6678, 2N6693
(4) Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0%.
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803
Page 2 of 2