Tyco Electronics Corporation
300 Constitution Drive Faraday Road 3816 Noborito, Tama-ku Asia Pacific Headquarters
Menlo Park, CA 94025-1164 Dorcan, Swindon, SN3 5HH Kawasaki, Kanagawa 214-8533 26 Ang Mo Kio, Industrial Park 2
USA United Kingdom Japan Singapore 569507
Tel:(800) 926-2425 (US & Canada) Tel: +44 1793 528171 Tel: +81 44 900 5102 Tel: +65 4866 151
Tel:+1 (650) 361-3860 (All other countries)
Users should independently evaluate the suitability of the product for their application.
For more information about this product visit www.tycoelectronics.com
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes
no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and
Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, r esale, use, or misuse of the
product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reser ves the right to make changes in materials or processing
without notification to the Buyer which do not affect compliance with any applicable specification.
Specification values
Property Unit Requirement Method of test
Material Dimensions mm (inches) See reverse ASTM D 2671
Longitudinal change percent 0 to –10 ASTM D 2671
Tensile strength psi (MPa) 1500 (10.3) minimum ASTM D 2671
Ultimate elongation percent 250 minimum ASTM D 2671
Secant modulus at 2% psi (MPa) 20,000 (137) minimum ASTM D 2671
(expanded)*
Heat shock No dripping, flowing or ASTM D 2671
(4 hours at 225°C/437°F) cracking of outer jacket
Dynamic cut through pounds (kg) 30 (13.6) minimum ASTM D3032
Volume resistivity ohm-cm 1.0 X 1012 minimum ASTM D 2671
Flammability Self-extinguishing See note below
within 30 seconds
Splice performance Current leakage microamps 0.25 maximum See note below
Room temperature flex test See note below
Current leakage microamps 0.25 maximum
Thermal shock See note below
Current leakage microamps 0.25 maximum
Low-temperature flexibility See note below
Dielectric withstand No breakdown
1 minute at 1000 V
Heat aging See note below
Current leakage microamps 0.25 maximum
Fluid immersion See note below
Current leakage microamps 0.25 maximum
Swell percent 50 maximum
Note: Consult Raychem RT-1112 for specific details about test procedures.
*Calculate based on wall thickness of jacket only.
Standard cut lengths
Part number Standard cut length Cut length tolerance
ES2000-No. 1 27 mm, 50 mm, 65 mm ± 1.5 mm
1220 mm ± 25.4 mm
ES2000-No. 2 27 mm, 50 mm, 65 mm ± 1.5 mm
1220 mm ± 25.4 mm
ES2000-No. 3 27 mm, 65 mm, 75 mm ± 1.5 mm
1220 mm ± 25.4 mm
ES2000-No. 4 27 mm, 75 mm, 90 mm ± 1.5 mm
1220 mm ± 25.4 mm
Raychem is a trademark of Tyco Electronics Corporation.
© 1990, 2002 Tyco Electronics Corporation Printed in USA 1654044 Revised 04/04