Print this page Series-connected DIN/flange mount high-frequency noise filter/surge suppressor. Ideal applications include critical industrial loads drawing up to 20 amps of continuous current. Typical applications include any microprocessor-based products, including industrial PLCs, OEM applications, and motion control systems. Multi-staged design, combining a unique hybrid clamping network with the Active Tracking Technology of the Islatrol(R) family Surge current capacity--45,000 Amps Transient protection in all modes: line to neutral, line to ground, and neutral to ground LED status indication and form C contact for remote indication DIN mountable enclosure UL 1449, 1283, CUL recognized, CE 10-year warranty MCOV UL 1449 Classification 120 Volt 150 VRMS 120V Normal Mode 330 Volts 240 Volt 275 VRMS 120V Common Mode 400 Volts 240V Normal Mode 600 Volts 240V Common Mode 800 Volts Line Frequency Connection Mounting Type Weight 47-63 Hz Terminal DIN/Flange < 3 lbs Response Time Normal Mode Common Mode Operating Temperature < 0.5 ns < 5 ns -40C to +45C Derate Linearly to 60% at +70C Operating Humidity Peak Surge Current Capability (8 x 20 s) Line to Neutral 15,000 Amps Line to Ground 15,000 Amps Neutral to Ground 15,000 Amps Total 45,000 Amps Frequency Response (Forward-Reverse) Normal Mode 0% to 95% Common Mode 10 kHz to 50 MHz-- 90 dB Min 5 MHz to 50 MHz-- 60 dB Min Typical Category A Ringwave (6 kV, 200A, 100 kHz) Normal Mode/Common Mode 3 Amp 1V / 300V 5 Amp 0.7V / 292V 10 Amp 0.7V / 300V 20 Amp 0.7V / 300V Typical Category B Ringwave (6 kV, 500A, 100 kHz) Normal Mode/Common Mode 3 Amp 178V / 300V 5 Amp 162V / 291V 10 Amp 153V / 300V 20 Amp 200V / 300V Voltage* Continuous Current Model 120V 3 Amps IE-103 120V 5 Amps IE-105 120V 10 Amps IE-110 120V 20 Amps IE-120 240V 3 Amps IE-203 240V 5 Amps IE-205 240V 10 Amps IE-210 240V 20 Amps IE-220 * All voltage configurations are single phase--2 wire + gnd.