NEXT FIND IT Table of Contents CLICK FOR PDF FILE CLICK FOR PDF FILE CLICK FOR PDF FILE OVERVIEW - Inductive Proximity Sensors CYLINDRICAL Inductive Proximity Sensors LIMIT STYLE Inductive Proximity Sensors Introduction ........................................4 Operation ............................................5 Introduction/Operation .......................8 Selection Guide, DC styles................12 Selection Guide, AC styles ................14 Product Specifications......................16 Introduction/Operation .....................68 Selection Guide.................................71 Product Specifications......................72 CLICK FOR PDF FILE CLICK FOR PDF FILE BLOCK STYLE Inductive Proximity Sensors RING STYLE Inductive Proximity Sensors ACCESSORIES for Inductive Proximity Sensors Introduction/Operation .....................80 Selection Guide.................................82 Product Specifications......................84 Introduction/Operation .....................98 Selection Guide...............................100 Product Specifications....................102 Introduction ....................................113 Mounting Brackets .........................114 Cable Assemblies............................116 Switching Units...............................122 Motion Detectors............................128 OTHER INFORMATION APPENDIX: IP Codes .........................................132 NEMA requirements .......................133 Cross Reference .............................134 Glossary..........................................135 Conversion Charts ..........................137 INDEX .............................................138 TERMS & CONDITIONS .................141 WARRANTY....................................143 CLICK FOR PDF FILE All specifications subject to change without notice or obligation Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 3 PREVIOUS HOME NEXT FIND IT Block Sensors 80 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS BLOCK INDUCTIVE PROXIMITY SENSORS The Altech Inductive Proximity Block Sensor family has a wide selection of housings, with both fixed and adjustable sensing range. Units are available in DC, AC and AC/DC operating voltages. HOME NEXT FIND IT Sensing Distances - AC, DC, Block Sensors Type Voltage Flush* Mini Block DC 1.5 Standard DC, AC 2 Weld Immune DC, AC Analog Partially Flush* Non-Flush* 70 13 DC 2 - 15 15 - 40 *All Sensing Distances in mm. OUTPUTS NORMALLY OPEN (NO) OR NORMALLY CLOSED (NC) AC - NO, NC. DC- NO, NC FLUSH MOUNT VS. NON-FLUSH MOUNT Block Sensors that are flush mount and have electromagnetic fields directly in front of the sensing head may be mounted directly into metal without causing a false output. The sensing head must be clear or any non-target metal. Block sensors that are Non-Flush mount have electromagnetic fields with a wide sensing angle. Therefore care must be taken to ensure that no non-target metal comes in contact with the sensing head. See Figure 11 for mounting details. Operating Voltages - AC, DC Block Style AC 20 - 250 90 - 250 DC 10 - 30 18 - 30 Operating Current- AC, DC Block Style AC 180 mA 500 mA DC 5 mA 200 mA 400 mA Sensor Wiring Systems - AC, DC Block Style AC 2-Wire DC 3-Wire Fig. 11 4-Wire BLOCK SENSOR INSTALLATION OUTPUT CONNECTIONS Block sensors are available in 2 meter fixed PVC output cables, quick disconnect connector, or 1/2" 14NPT hole opening for wiring to a terminal block. Please see selection guide on pages 82-83 and the product specification for more information. HOUSING MATERIAL The following housing materials are used for housings in the Block Sensor family: Aluminum PBTP (GV-30) Trogamid T Aluminum/Trogamid T Nickel Plated Brass Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 81 PREVIOUS HOME NEXT FIND IT DC BLOCK SENSORS - SELECTION GUIDE Series Sensing Distance (mm) Size (mm) 1.5 Mini Housing 10-30V, 200 mA * LED on Connector Styles * Sensing Head at end or center Standard Series 10-30V, 200/400 mA * Plastic and Metal Housing * Large Sensing Distances * Adjustable Sensing for some models 8 x 8 x 40 2.0 4.0 6.0 13 15 40 50 Mounting 70 * * * 50 x 50 x 47 80 x 80 x 40 * * * 100 x 50 x 40 * 40 x 12 x 26 34 x 34 x 80 Analog Sensors 10-30V, 5 mA * Output distance proportional to target distance * Excellent linearity 3% * Determine target position information 80 x 80 x 40 PF * 53 x 22 x 9.5 Weld Immune 10-30V, 200 mA * Protection from electromagnetic interference * 2 LED's Adjustable FL NPN PNP NO * * * * * * * NF * * * Function * * * * * * * * * Function Connection * * * * * * * * * * * * * * AC BLOCK SENSORS - SELECTION GUIDE Series Sensing Distance (mm) Size (mm) 2.0 40 x 26 x 12 Standard Series 20-250V AC/ 90-250V * Metal and Plastic Housing * Large Sensing Distance 34 x 34 x 80 4.0 13.0 82 50 PF FL NF NO NC Cable * * * * * * * * * * * * * * * * 50 x 50 x 41 * * 70 x 66 x 60 34 x 34 x 80 40 * * 80 x 80 x 40 Weld Immune 20V-250V, 500 mA * Protection from electromagnetic interference 20 Mounting * * 62 Terminal Block * * * * * Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 NC * * PREVIOUS Connection Quick Disconnect Cable 59 * * * 64 Terminal Block * * * * * * * * * * HOME NEXT No. of Wires Housing Material No. of LED's Page 3 Brass, Nickel Plated 1 84 3 Tragamid T 1 88 3 Aluminum 1 88 3 PBTP 2 91 3 Aluminum 1 90 3 Trogamid T 1 86 3 PBTP 2 93 3 PBTP 0 92 No. of Wires* Housing Construction No. of LED's Page 2 Tragamid T 1 94 2 PBTP 2 94 2 Aluminum 2 95 2 Aluminum 1 95 2 PBTP 2 95 2 PBTP 2 96 FIND IT * A third wire is used for ground on metal sensors Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 83 PREVIOUS DC - 3 WIRE - MINI BLOCK HOUSING Brass, Nickel Plated (BN), Block,10-30V, 200mA active surface at front or centrally located HOME NEXT * Connector styles have LED for output energized * Carries mark * IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection for PNP types * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F) Flush Mount Active Surface in Front Sensing Distance NPN Flush Mount Active Surface Centered 1.5mm (.059 in.) Cable or Connector Style Cat. No. PNP FIND IT Normally Open 1.5mm (.059) Cable 64 Cable 64 9861-1000 9861-1064 9861-1100 9861-1164 Normally Closed Normally Open Normally Closed Ripple Voltage 10% 10% Voltage Range 10V - 30V 10V - 30V Supply Current 9 mA 9 mA Max. Load Current 200 mA 200 mA 1V 1V Max. Leakage Currrent 10 A 10 A Switching Frequency Voltage Drop Across Sensor 2000 Hz 2000 Hz Hysterisis 15% 15% Temperature Drift 10% 10% .15mm (.006 in.) .15mm (.006 in.) Repeatability 8 20 5 8 20 l l Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. 20 10 10 Note: Sensor dimensions in mm. 84 20 60 60 20 5 8 4 PORT LED l 8 20 l 4 PORT LED 10 10 40 40 5 5 64 Style Connector 3-pin, Pico style, 8mm (.31 in.). Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME NEXT FIND IT Metric/in. Conversion Table 1.0 mm 5.0 mm 8.0 mm 10.0 mm = = = = .04 in. .19 in. .31 in. .39 in. 20.0 mm = .78 in. 40.0 mm = 1.57 in. 60.0 mm = 2.36 in. This table converts millimeters to inches in reference to the illustrations included on these pages Accessories 2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 64 Connector 64 Connector 64 Connector 8000-5220 Straight 8000-5230 PVC, Right Angle, 2 LED, PNP 8000-5240 PVC, Right Angle, 2 LED, NPN Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information Wiring Diagrams Note: Wire colors are applicable on cable purchased from Altech PNP Fixed Cable + BR BLK BL LOAD * - Normally Open 64 Connector 1 BR + BK 2/4 LOAD BL* - 3 Normally Open Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 85 PREVIOUS DC - 3 WIRE PLASTIC BLOCK HOUSING 10-30V, 400mA LED for Output Energized HOME NEXT * Block Sensors feature large sensing distances * Carries mark 40 x 26 x 12mm Block Flush Mount Sensing Distance Cable or Connector Style Cat. No. PNP NPN Normally Open * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F) 40 x 26 x 12mm Block Non-Flush Mount 2mm (.08 in.) 4mm (.16 in.) Cable 64 Cable 64 9863-0400 9863-0464 9863-2700 9863-2900 9863-2764 9863-2964 9863-2100 9863-2164 Normally Closed Normally Open FIND IT Normally Closed Ripple Voltage Voltage Range 10% 10v - 30V 18mA 18mA 400 mA (n.o.) 200 mA (n.c.) 400 mA (n.o.) 200 mA (n.c.) Supply Current Maximum Load Current 10% 10v - 30V Voltage Drop Across Sensor 2.2V 2.2V Maximum Leakage Current 10A 10A Switching Frequency 800Hz 800Hz Hysterisis 15% 15% 10% 10% .20mm (.008 in.) .20mm (.008 in.) Trogamid T Trogamid T Temperature Drift Repeatability Housing Material Note: Sensor dimensions in m 40 40 3 26 3 12 12 LED LED M8 M8 40 40 3 26 3 26 64 Style Connector 3-pin, Pico style, 8mm (.310 in.). 26 Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. 12 12 86 Altech Corp (R) * 35 Royal Road * Flemington NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME NEXT FIND IT Metric/in. Conversion Table 3.0 mm = .11 in. 8.0 mm = .31 in. 12.0 mm = .47 in. 26.0 mm = 1.02 in. 40.0 mm = 1.57 in. This table converts millimeters to inches in reference to the illustrations included on these pages Accessories 2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 64 Connector 64 Connector 64 Connector 8000-5220 Straight 8000-5230 PVC, Right Angle, 2LED, PNP 8000-5240 PVC, Right Angle, 2LED, NPN Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information Wiring Diagrams Note: Wire colors are applicable to cable purchased from Altech PNP NPN Fixed Cable Fixed Cable + BR BR * + LOAD BK BK LOAD * - BL Normally Open BL - Normally Open Fixed Cable BR + BK LOAD * BL - Normally Closed 64 Connector 64 Connector 1 BR + 1 BR 2/4 * + LOAD BK LOAD 2/4 BL * - 3 BK BL - 3 Normally Open Normally Open 64 Connector 1 BR + BK 2/4 LOAD BL* - 3 Normally Closed Altech Corp (R) * 35 Royal Road * Flemington NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 87 PREVIOUS DC - 3 WIRE - METAL & PLASTIC BLOCK HOUSING 10-30V, 400mA LED for Output Energized HOME NEXT * Block Sensors feature large sensing distances * Some models feature adjustable sensing distance * Carries * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F) mark 53 x 22 x 9.5mm Block Flush Mount Sensing Distance 6mm (.24 in.) Cable or Connector Style Cat. No. PNP Normally Open Normally Closed NPN Normally Open FIND IT 50 x 50 x 47mm Block Flush Mount Adjustable to 40mm (1.57 in.) Cable Cable 59 65 9864-0200 9807-0900 9807-0959 9807-0965 9807-0100 9807-0159 9807-0165 Normally Closed Ripple Voltage 10% 10% Voltage Range 10v - 30V 10v - 30V Supply Current 18mA 18mA Maximum Load Current 400 mA 400 mA Voltage Drop Across Sensor 2.4V 2.4V Maximum Leakage Current 10 10 Switching Frequency 100Hz 300Hz Hysterisis 15% 15% Temperature Drift 10% 10% .3mm (.012 in.) 2mm (.08 in.) Trogamid T Aluminum Repeatability Housing Material Note: Sensor dimensions in m l 46 22 Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. R3 47 53 12 LED 9,5 36 15 LED 50 5 6, l 46 59 Style Connector 4-pin, Metal, 19mm (.75 in.) device. 47 LED 5 6, 88 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 50 36 15 * Also available in a 65 Style Connector 4-pin Micro style, 12mm (.47 in.). Consult Altech. PREVIOUS HOME NEXT FIND IT Metric/in. Conversion Table 3.0 mm 6.5 mm 9.5 mm 12.0 mm 15.0 mm 22.0 mm = = = = = = .11 in. .25 in. .37 in. .47 in. .59 in. .86 in. 36.0 mm 46.0 mm 47.0 mm 50.0 mm 53.0 mm = = = = = 1.41 in. 1.81 in. 1.85 in. 1.96 in. 2.08 in. This table converts millimeters to inches in reference to the illustrations included on these pages Accessories 2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 59 Connector 9512-0200 PVC, Straight Change last digit of connector number to 2 for 5 meter cable 65 Connector 65 Connector 65 Connector 65 Connector 8000-5110 8000-5120 8000-5150 8000-5160 PVC, Straight PVC, Right Angle PVC, Right Angle, 2LED, NPN PVC, Right Angle, 2LED, PNP Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information Mounting Brackets - see Pages 114-115 Wiring Diagrams Note: Wire colors are applicable to cable purchased from Altech PNP NPN Fixed Cable Fixed Cable + BR * LOAD BK BK LOAD * - BL BL Normally Open RED 3 1 2 59 Connector RED + 4 LOAD - * Normally Open + * 3 LOAD WHT WHT BL - Normally Open 59 Connector 4 + BR 1 2 BL - Normally Open Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 89 PREVIOUS HOME NEXT DC - 3 WIRE METAL BLOCK HOUSING 10-30V, 400mA * Block Sensors feature large sensing distances * Some models feature adjustable sensing distance Selection of operating frequency allows units to be mounted adjacently without interference * LED for Output Energized * Carries * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F) mark 100 x 50 x 40mm Block Non-Flush Mount Sensing Distance Adjustable to 70mm (2.76 in.) Cable or Connector Style Cat. No. Cable 59 9809-0100 (f1)* 9809-0159 (f1)* 9809-3400 (f2)* 9809-3459 (f2)* 9809-3500 (f3)* 9809-3559 (f3)* 9809-0300 (f1)* 9809-0359 (f1)* 9809-0400 (f2)* 9809-0459 (f2)* 9809-0500 (f3)* 9809-0559 (f3)* PNP NPN Normally Open Normally Open Ripple Voltage 10% 10% Voltage Range 10V - 30V 10V - 30V Supply Curent 12 mA 12 mA Maximum Load Current 400 mA 400 mA FIND IT * For operation where units will be located adjacently, models with different operating frequencies must be selected Metric/in. Conversion Table 6.5 mm 7.5 mm 40mm = .25 in. = .29 in. = 1.57 in. 50 mm = 1.96 in. 100 mm = 3.93 in. This table converts millimeters to inches in reference to the illustrations included on these pages Accessories 2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors Voltage Drop Across Sensor 2.4V 2.4V 59 Connector Maximum Leakage Current 10 A 10 A Switching Frequency 300Hz 300Hz Change last digit of connector number to 2 for 5 meter cable Refer to pages 116-121 for more cable information Hysterisis 15% 15% Temperature Drift 10% 10% 7mm (.28 in.) 7mm (.028 in.) Aluminum Aluminum One LED One LED Repeatability Housing Material LED Note: Sensor dimensions in mm. 9512-0200 PVC Straight Wiring Diagrams Note: Wire colors are applicable to cable purchased from Altech PNP NPN Fixed Cable 50 Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. LED Fixed Cable + BR 40 + BR * LOAD BK BK LOAD * - BL BL R - Normally Open 10 0 5 7, Normally Open 5 6, 59 Connector 40 4 59 Connector RED + 4 3 LOAD - * Normally Open + * 3 LOAD WHT WHT 2 1 BL 1 2 BL Normally Open 10 0 5 7, 5 6, 90 LED R * Also available in a 65 Style Connector 4-pin Micro style, 12mm (.47 in.). Consult Altech. RED 50 59 Style Connector 4-pin, Metal, 19mm (.75 in.) device Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 - PREVIOUS HOME NEXT FIND IT * Block Sensors feature large sensing distances DC - 3 WIRE PLASTIC BLOCK HOUSING 10-30V, 200mA * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F) * Complementary Outputs 2 LEDs for Operating Voltage and Output Energized * Carries mark 80 x 80 x 40mm Block Flush Mount Non-Flush Mount Sensing Distance 40mm (1.57 in.) 50mm (1.97 in.) Screw Terminals Screw Terminals 9865-1133 9865-1033 Cable or Connector Style Cat. No. PNP NPN (Complementary NO/NC) 11 mm 40 mm 80 mm Ripple Voltage 10% 10% Voltage Range 10V - 30V 10V - 30V Supply Curent 22 mA 22 mA Maximum Load Current 200 mA 200 mA Voltage Drop Across Sensor 2.4V 2.4V Maximum Leakage Current 10 A 10 A Switching Frequency 100Hz 300Hz Hysterisis 10% 15% Temperature Drift 10% 10% 2mm (.08 in.) 2.5mm (.10 in.) Housing Material LED = .43 in. = 1.57 in = 3.15 in. This table converts millimeters to inches in reference to the illustrations included on these pages (Complementary NO/NC) Repeatability Metric/in. Conversion Table PBTP PBTP Two LEDs Two LEDs Note: Sensor dimensions in mm. Wiring Diagrams Note: Wire colors are applicable to cable purchased from Altech 2 LED PNP 1 + 4(N.O.) Screw Terminals Screw terminals are located internally in housing for wire connections. 40 2(N.C.) LOAD - * 11 80 80 LOAD 3 * (1/2"-14 NPT) Internal thread with screw terminals Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 91 PREVIOUS HOME NEXT FIND IT * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Temperature Range: -25 to 70C (-13 to 158F) * Output voltage proportional to target distance * Ideal for determining position information * Excellent linearity 3% * Carries mark DC ANALOG SENSORS BLOCK SERIES Plastic (PBTP) Housing 18 - 30V DC Analog Output 1V - 9V Analog Additional Information The Analog output voltage can be digitized by means of the 8100-2100 Switching Unit and the Modules 8100-2400/-2500 80 x 80 x 40mm Block Non-Flush Mount Sensing Distance 15mm (.59 in.) to 40mm (1.57 in.) Cable or Connector Style Cat. No. Screw Terminals Metric/in. Conversion Table 9814-2133 Voltage Range 18V - 30V Supply Current 10 mA Maximum Load Current 11.0 mm = .43 in. 40.0 mm = 1.57 in. 80.0 mm = 3.15 in. This table converts millimeters to inches in reference to the illustrations included on these pages 5 mA Maximum Switching Frequency 20Hz Temperature Drift 0.3V Repeatability 1% Output Voltage Range 1-9V DC Housing Material PBTP Note: Sensor dimensions in mm. Wiring Diagrams 1 Screw Terminals Screw terminals are located internally for wire connections. + 2 3 LOAD * - 11 80 80 40 (1/2"-14 NPT) Internal Thread with Screw Terminals 92 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME NEXT * Circuitry that protects for electromagnetic interference DC - 3 WIRE WELD IMMUNE BLOCK, Plastic (PBTP) 10-30V, 200mA 2 LEDs for Operating Voltage and Output Energized * Carries mark 34 x 34 x 80mm Block Partially Flush Mount Sensing Distance PNP NPN Normally Open Normally Closed Cable Cable 9863-3800 9863-3900 * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Short Circuit Protection * Overload Protection * Reverse Polarity Protection * Wire Break Resistance * Temperature Range: -25 to 70C (-13 to 158F) Metric/in. Conversion Table 13mm (.51 in.) Cable or Connector Style Cat. No. FIND IT 1.0 mm = .04 in. 5.3 mm = .21 in. 34.0 mm = 1.57 in 66.0 mm = 2.6 in. 80.0 mm = 3.5 in. This table converts millimeters to inches in reference to the illustrations included on these pages Normally Open Normally Closed Ripple Voltage 10% 10% Voltage Range 10V - 30V 10V - 30V Supply Current 18 mA 18 mA Maximum Load Current 200 mA 200 mA Voltage Drop Across Sensor 2.4V 2.4V Maximum Leakage Current 10 A 10 A Switching Frequency 15Hz 15Hz Hysterisis 15% 15% Temperature Drift Repeatability Housing Material Sensing Head Position LED 10% 10% 1.3mm (.051 in.) 1.3mm (.051 in.) PBTP (GV 30) PBTP (GV 30) Front Top/Side Rotatable Two LEDs Two LEDs Note: Sensor dimensions in mm. Wiring Diagrams Note: Wire colors are applicable to cable purchased from Altech 2 LED l 5, 3 34 Fixed Cable BR + BK Fixed Cable PVC 2m (6 ft. 6 in.). Other cable lengths available, please consult Altech. LOAD * - BL 80 66 Normally Open Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 93 PREVIOUS HOME NEXT FIND IT * One LED models for Output Energized * Two LED models for Operating Voltage and Output Energized AC - 2 WIRE BLOCK METAL & PLASTIC HOUSING Models include: 90-250V AC, 180 mA, 20-250V AC, 500mA * IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Temperature Range: -25 to 50C (-13 to 122F) -25 to 70C (-13 to 158F) * Large sensing distances * Carries mark 40 x 26 x 12mm Block Flush Mount 34 x 34 x 80mm Block Partially Flush Mount 2mm (.08 in.) 13mm (.51 in.) Sensing Distance Cable or Connector Style Cat. No. Cable Cable Cable Normally Open 9853-2400 9853-3800 9853-3900 Normally Closed 9853-2500 9853-3600 9853-3700 90V-250V AC 20V - 250V AC 20V - 250V 50/60Hz Voltage Range Operating Frequency 50/60Hz 50/60Hz Supply Current 5 mA 2 mA 2 mA Max. Load Current 180 mA 500 mA 500 mA 12V 5V 5V 3mA/230V 1.5mA/110V 2mA 2mA 1A 8A 8A Switching Frequency 25Hz 15Hz 15Hz Hysterisis 15% 15% 15% Voltage Drop Across Sensor Max. Leakage Currrent Short Term Current (20 ms, 1Hz) 10% 10% 10% .2mm (.008 in.) 1.3mm (.051 in.) 1.3mm (.051 in.) Temperature Drift Repeatability Housing Material Sensing Head Position Trogamid T PBTP (GV 30) PBTP (GV 30) - Active Surface in Front Active Surface on Top - Rotatable 2 LED 5, 3 34 34 26 80 66 40 3 12 Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. 62 Connector 3-Pin Mini Style, 25.4mm (1.0 in.). Screw Terminals Screw terminals are located internally in housing for wire connection. 94 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME NEXT FIND IT Accessories Metric/in. Conversion Table 3.0 mm 5.3 mm 6.5 mm 12.0 mm 24.0 mm 26.0 mm 34.0 mm 40.0 mm 41.0 mm 45.0 mm = 0.1 in. = 0.2 in. = .25 in. = .47 in. = .94 in. =1.02 in. =1.33 in. =1.57 in. =1.61 in. =1.77 in. 50.0 mm = 60.0 mm = 64.0 mm = 66.0 mm = 70.0 mm = 80.0 mm = 90.0 mm = 110.0mm = 2 meter (6 ft. 6 in.) AC Cable Assemblies for Quick Disconnect Sensors 1.96 in. 2.36 in. 2.52 in. 2.59 in. 2.75 in. 3.15 in. 3.54 in. 4.33 in. 62 Connector This table converts millimeters to inches in reference to the illustrations included on these pages 8000-5030 PVC Straight Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information Mounting Brackets - see Pages 114-115 50 x 50 x 41mm Block 70 x 66 x 60mm Block 80 x 80 x 40mm Block Flush Mount Flush Mount Non-Flush Mount 20mm (.79 in.) 40mm (1.57 in.) 50mm (1.97 in.) 62 Cable Scrrew Terminals 9855-0062 9803-3000 9855-1000 9855-1100 20V - 250V 20V - 250V 20V - 250V 50/60Hz 50/60Hz 50/60Hz 2 mA 2 mA 2 mA 500 mA 500 mA 500 mA 5V 5V 5V 2 mA 2 mA 2 mA 8A 8A 8A 15Hz 25Hz 10Hz 15% 15% 15% Wiring Diagrams 10% 10% 10% 2mm (.079 in.) 4mm (.157 in.) 5mm (.197 in.) Aluminum Aluminum PBTP (GV 30) - - - Note: Wire colors are applicable to cable purchased from Altech Fixed Cable Fixed Cable BR BR LOAD LOAD BL Note: Sensor dimensions in mm. BL Normally Open Normally Closed l 64 Fixed Cable 9803-3000 BR 6, BL LOAD 5 60 90 0 11 24 4 70 5 Yellow/GRN LED Normally Open 3 5, 62 Connector 2 LED 40 GR 2 41 1 3 WHT 50 BLK LOAD 50 2 LED Screw Terminal 1 40 2 11 80 80 LOAD Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 95 PREVIOUS HOME NEXT * Circuitry that protects for electromagnetic interference AC - 2 WIRE WELD IMMUNE BLOCK, Plastic Housing 20-250V AC, 500mA 2 LEDs for Operating Voltage and Output Energized * Carries mark * IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection * Temperature Range: -25 to 70C (-13 to 158F) 34 x 34 x 80mm Block Partially Flush Mount Sensing Distance Cable Cable Normally Open 9853-3800 9853-3900 Normally Closed 9853-3600 9853-3700 20V - 250V AC 20V - 250V AC 50/60Hz 50/60Hz Voltage Range Operating Frequency Supply Current 2 mA 2 mA Maximum Load Current 500 mA 500 mA Voltage Drop Across Sensor 5V 5V Maximum Leakage Current 2 mA 2 mA Short Term Current (20 ms, 1Hz) 8A 8A Switching Frequency 15Hz 15Hz Hysterisis 15% 15% Temperature Drift 10% 10% .65mm (.026 in.) .65mm (.026 in.) PBTP (GV 30) PBTP (GV 30) Front Top/Side Rotatable Repeatability Housing Material Sensing Head Position Metric/in. Conversion Table 1.0 mm = .04 in. 5.3 mm = .21 in. 34.0 mm = 1.57 in 66.0 mm = 2.6 in. 80.0 mm = 3.5 in. This table converts millimeters to inches in reference to the illustrations included on these pages Accessories 13mm (.51 in.) Cable or Connector Style Cat. No. FIND IT Mounting Brackets - see Pages 114-115 Note: Sensor dimensions in mm. Wiring Diagrams Note: Wire colors are applicable to cable purchased from Altech 2 LED l 5, 3 34 Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Fixed Cable Fixed Cable BR BR LOAD LOAD BL Normally Closed 80 66 Normally Open BL 96 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 PREVIOUS HOME NEXT FIND IT Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908) 806-9400 * Fax (908) 806-9490 97