SMT-0827-S-2-R 8.5 x 8.5mm Transducer 3541 Stop Eight Road * Dayton, Ohio 45414 Product Overview * Side-firing electromechanical transducer designed for 2.5 to 4.5 Vp-p * Small 8.5 x 8.5mm footprint and 4mm height for thin, modern devices * 92 dBA minimum output (3.6Vp-p @ 10 cm) and 2.7 kHz resonant frequency * Designed for reflow soldering using a lead-free profile Frequency Response (3.6 Vp-p @ 0.1 meters) PUI Audio Inc. engages in continuous product improvement. All specifications are subject to change without notice. www.puiaudio.com. Copyright (c) 2015. Last Revised 12/15. AT-1438-TWT-R SMT-0827-S-2-R 40mm Speaker 8.5 x 8.5mm Transducer Mechanical and Environment Testing Test Description Test Condition High Temperature 85C (2C) with random humidity for 96 hours Low Temperature Drop Test -40C (2C) with random humidity for 96 hours 25C to 60C with 90% to 95% relative humidity for 12 hours, 10 cycles 1.53 mm movement modulated at 10-55 Hz in 3 directions for 6 hours 120 cm free fall in six directions, 3 cycles Temperature Cycle Test -30C to 70C, five 90 minute cycles Humidity Vibration Recommended Reflow Profile After testing, part shall rest for two hours and then be tested for a clean, pure tone. Recommended Land Pattern Tape Dimensions PUI Audio Inc. engages in continuous product improvement. All specifications are subject to change without notice. www.puiaudio.com. Copyright (c) 2015. Last Revised 12/15. SPECIFICATIONS PARAMETERS VALUES UNIT RATED VOLTAGE OPERATING VOLTAGE RANGE RATED CURRENT (MAX) 3.6 2.5 ~ 4.5 90 15 3 92 2,700 500 Vp-p Vp-p COIL RESISTANCE MINIMUM SPL @ 10 CM RESONANT FREQUENCY OPERATING TEMPERATURE STORAGE TEMPERATURE HOUSING MATERIAL TERMINAL MATERIAL POLARITY PAD (+) 8.5 mA OHM dBA Hz C C - A B C DESCRIPTION DATE APPROVED RELEASED FROM ENGINEERING ADDED RoHS COMPLIANCE NOTE REVISED TO INVENTOR 3-D DRAWING TEMPLATE REVISED SPL VALUE 4/1/2005 8/10/2005 5/4/2010 10/28/2011 B.R. M.L. A(5:1) B grams 8.5 POLARITY PAD (-) REVISION HISTORY LTR - 06.J T0827S2R PUI KOREA WEIGHT -30 ~ +70 -40 ~ +85 LCP Sn PLATED PHOSPHOR BRONZE 0.42 THIS DOCUMENT CONTAINS DATA PROPRIETARY TO PROJECTS UNLIMITED, INC. ANY USE OR REPRODUCTION, IN ANY FORM, WITHOUT PRIOR WRITTEN PERMISSION OF PROJECTS UNLIMITED, INC. IS PROHIBITED. (c)2003, Projects Unlimited Inc. 4 1.5 0.1 (3) 0.95 DUMMY PAD 1.03 0.3 0.1 2.8 SOUND EMISSION HOLE DUMMY PAD PAD 0.1 MAX. DETAIL "B" NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS. 2. SPECIFICATIONS SUBJECT TO CHANGE OR WITHDRAWL WITHOUT NOTICE. 3. THIS PART IS RoHS 2002/95/EC COMPLIANT. BOTTOM OF TRANSDUCER UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS, TOLERANCES ARE 0.5 AND ANGLES ARE 3. 0.1 MAX. SIZE A3 SMT-0827-S-2-R.idw Designed by Date Checked by Date Approved by Date Drawn Date G.V. 4/1/2005 E.P. 4/1/2005 R.W. 4/1/2005 5/4/2010 SMT-0827-S-2-R Transducer (Electro-Mech) Edition Sheet - 1/1