RJH *5((1 &$3 &8VH+LJK5HOLDELOLW\/RZ,PSHGDQFH&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Y& /RZ ,PSHGDQFH KRXUV $QWL FOHDQLQJ VROYHQW The capacitor of this Series achieves high reliability under the environmental loading prevailing in a piece of equipment on which it is mounted. Guarantees 5000 hours at 105. Low impedance (5 to 6.3 : 2000 hours ; 8 to 10 : 3000 hours) RJH RJJ Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () 55 to 105 Tolerance at rated capacitance (%) 20 Leakage current (A) Less than 0.01CV 2 (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tangent of loss angle (tan) (20,120Hz) (20) Rated voltage (V) 6.3 10 16 25 35 50 63 100 tan (max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 (20,120Hz) 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) Characteristics at high and low temperature Impedance ratio (max.) 6.3 10 16 25 35 50 63 -25/20 2 2 2 2 2 2 2 100 2 -55/20 3 3 3 3 3 3 3 3 (120Hz) 5000 hours Test time Endurance (105) (Applied ripple current) The initial specified value or less Leakage current Within 20% of initial value Percentage of capacitance change 1000 hours Test time The initial specified value or less Leakage current Within 15% of initial value Percentage of capacitance change 150% or less of the initial specified value Tangent of the loss angle Voltage application treatment Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm Vent (except5) d0.05 copper clad steel wire (tinned) Sleeve F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors 200% or less of the initial specified value Tangent of the loss angle Shelf life (105) (5 to 6.3 : 2000 hours) (8 to 10 : 3000 hours) L max. 15min. 5 min. Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated capacitance (F) 0.47 to 4.7 5.6 to 47 56 to 270 330 to 1000 1200 to 15000 5 2.0 0.5 1.0 CAT.No.2013/2014E 6.3 2.5 0.5 1.0 8 3.5 0.6 1.0 10 5.0 0.6 2.0 12.5 5.0 0. 6 2.0 1k 10k 100k 0.68 0.76 0.85 0.93 0.95 0.78 0.87 0.90 0.98 1 1 1 1 1 1 Part numbering system (example : 10V5600F) RJH D F d 120 0.40 0.50 0.70 0.80 0.90 16 7.5 0.8 2.0 18 7.5 0.8 2.0 Series code 102 10 Rated voltage symbol V 562 M Rated capacitance Capacitance symbol tolerance symbol J7 # Casing symbol Taping(Forming) symbol NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RJH Standard Ratings Rated voltage (V) Case DxL (mm) 6.3 Item Rated capacitance Casing symbol (F) ESR () 10 Impedance ( max.) 20 Rated ripple current Rated capacitance -10 (mArms) (F) ESR Impedance ( max.) () 20 -10 Rated ripple current (mArms) E3 100 3.65 0.65 1.46 175 82 3.84 0.65 1.46 175 5x15 E4 150 2.43 0.46 1.04 235 100 3.15 0.46 1.04 235 6.3x11.5 F3 220 1.66 0.31 0.70 290 180 1.75 0.31 0.70 290 6.3x15 F4 330 1.11 0.20 0.45 400 220 1.43 0.20 0.45 400 8x12 G3 470 0.777 0.17 0.38 488 330 0.956 0.17 0.38 488 8x15 G4 680 0.537 0.13 0.29 617 470 0.671 0.13 0.29 617 8x20 G5 1000 0.365 0.095 0.21 800 680 0.464 0.095 0.21 800 10x12.5 H3 680 0.537 0.1 0.23 625 470 0.671 0.10 0.23 625 10x16 H4 820 0.446 0.08 0.18 825 560 0.563 0.080 0.18 825 10x20 H5 1200 0.305 0.062 0.14 1010 1000 0.316 0.062 0.14 1010 10x25 H6 1500 0.244 0.052 0.12 1190 1200 0.263 0.052 0.12 1190 10x30 H7 2200 0.181 0.044 0.099 1440 1500 0.211 0.044 0.099 1440 12.5x15 4 1200 0.305 0.062 0.14 1010 * 1000 0.316 0.062 0.14 1010 12.5x20 5 2200 0.181 0.042 0.095 1400 1800 0.176 0.042 0.095 1400 12.5x25 6 2700 0.148 0.034 0.076 1690 2200 0.159 0.034 0.076 1690 12.5x30 7 3900 0.111 0.03 0.068 1950 2700 0.130 0.030 0.068 1950 12.5x35 8 4700 0.099 0.024 0.054 2220 3300 0.116 0.024 0.054 2220 12.5x40 9 5600 0.089 0.021 0.047 2390 3900 0.098 0.021 0.047 2390 16x16 J4 * 2700 0.148 0.046 0.10 1310 * 1800 0.176 0.046 0.10 1310 16x20 J5 * 4700 0.099 0.034 0.077 1660 * 3300 0.116 0.034 0.077 1660 16x25 J6 5600 0.089 0.028 0.063 2070 3900 0.098 0.028 0.063 2070 16x31.5 J7 6800 0.079 0.025 0.056 2350 5600 0.080 0.025 0.056 2350 16x35.5 J8 8200 0.073 0.022 0.050 2550 6800 0.071 0.022 0.050 2550 16x40 J9 12000 0.059 0.018 0.041 2970 8200 0.067 0.018 0.041 2970 18x16 K4 * 3300 0.131 0.043 0.097 1460 * 2200 0.159 0.043 0.097 1460 18x20 K5 * 5600 0.089 0.030 0.068 1850 * 3900 0.098 0.030 0.068 1850 18x25 K6 * 6800 0.079 0.027 0.061 2120 * 4700 0.089 0.027 0.061 2120 18x31.5 K7 10000 0.064 0.023 0.052 2410 6800 0.071 0.023 0.052 2410 18x35.5 K8 12000 0.059 0.019 0.043 2680 8200 0.067 0.019 0.043 2680 18x40 K9 15000 0.054 0.017 0.038 3010 10000 0.059 0.017 0.038 3010 * Rated voltage (V) Case DxL (mm) 16 Item Rated capacitance Casing symbol (F) ESR () 25 Impedance ( max.) 20 -10 Rated ripple current Rated capacitance (mArms) (F) ESR () Impedance ( max.) 20 -10 Rated ripple current (mArms) 5x11.5 E3 56 4.74 0.65 1.46 175 39 5.96 0.65 1.46 175 5x15 E4 82 3.24 0.46 1.04 235 56 4.15 0.46 1.04 235 6.3x11.5 F3 120 2.21 0.31 0.70 290 82 2.83 0.31 0.70 290 6.3x15 F4 180 1.48 0.20 0.45 400 120 1.94 0.20 0.45 400 8x12 G3 270 0.983 0.17 0.38 488 180 1.29 0.17 0.38 488 8x15 G4 330 0.805 0.13 0.29 617 220 1.06 0.13 0.29 617 8x20 G5 470 0.565 0.095 0.21 800 330 0.704 0.095 0.21 800 10x12.5 H3 330 0.805 0.10 0.23 625 220 1.06 0.10 0.23 625 10x16 H4 390 0.681 0.080 0.18 825 270 0.861 0.080 0.18 825 10x20 H5 680 0.391 0.062 0.14 1010 470 0.495 0.062 0.14 1010 10x25 H6 820 0.324 0.052 0.12 1190 560 0.415 0.052 0.12 1190 10x30 H7 1200 0.222 0.044 0.099 1440 820 0.284 0.044 0.099 1440 12.5x15 4 680 0.391 0.062 0.14 1010 470 0.495 0.062 0.14 1010 12.5x20 5 1200 0.222 0.042 0.095 1400 820 0.284 0.042 0.095 1400 12.5x25 6 1500 0.177 0.034 0.076 1690 1000 0.233 0.034 0.076 1690 12.5x30 7 2200 0.136 0.030 0.068 1950 1500 0.155 0.030 0.068 1950 12.5x35 8 2700 0.111 0.024 0.054 2220 1800 0.130 0.024 0.054 2220 12.5x40 9 3300 0.101 0.021 0.047 2390 2200 0.121 0.021 0.047 2390 16x16 J4 * 1500 0.177 0.046 0.10 1310 * 820 0.284 0.046 0.10 1310 16x20 J5 * 2200 0.136 0.034 0.077 1660 * 1500 0.155 0.034 0.077 1660 16x25 J6 2700 0.111 0.028 0.063 2070 1800 0.130 0.028 0.063 2070 16x31.5 J7 3900 0.086 0.025 0.056 2350 2700 0.099 0.025 0.056 2350 16x35.5 J8 4700 0.078 0.022 0.050 2550 3300 0.091 0.022 0.050 2550 16x40 J9 5600 0.072 0.018 0.041 2970 3900 0.077 0.018 0.041 2970 18x16 K4 * 1500 0.177 0.043 0.097 1460 * 1200 0.194 0.043 0.097 1460 18x20 K5 * 2700 0.111 0.030 0.068 1850 * 1800 0.130 0.030 0.068 1850 18x25 K6 * 3900 0.086 0.027 0.061 2120 * 2700 0.099 0.027 0.061 2120 18x31.5 K7 4700 0.078 0.023 0.052 2410 3300 0.091 0.023 0.052 2410 18x35.5 K8 6800 0.064 0.019 0.043 2680 3900 0.077 0.019 0.043 2680 18x40 K9 8200 0.061 0.017 0.038 3010 4700 0.071 0.017 0.038 3010 * * (Note) ESR : 20, 120Hz ; Impedance : 100kHz ; Rated ripple current : 105, 100kHz * : The black circles in the capacitance column denote semi-standard products. The standard ratings follow the next page. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 103 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors 5x11.5 RJH (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard Ratings ESR () 7.37 5.10 3.56 2.43 1.66 1.11 0.905 1.33 1.11 0.604 0.511 0.356 0.604 0.356 0.293 0.200 0.166 0.133 0.356 0.200 0.166 0.111 0.106 0.087 0.293 0.166 0.111 0.106 0.087 0.081 35 Impedance ( max.) 20 -10 0.65 1.46 0.46 1.04 0.31 0.70 0.20 0.45 0.17 0.38 0.13 0.29 0.095 0.21 0.10 0.23 0.080 0.18 0.062 0.14 0.052 0.12 0.044 0.099 0.062 0.140 0.042 0.095 0.034 0.076 0.030 0.068 0.024 0.054 0.021 0.047 0.046 0.10 0.034 0.077 0.028 0.063 0.025 0.056 0.022 0.050 0.018 0.041 0.043 0.097 0.030 0.068 0.027 0.061 0.023 0.052 0.019 0.043 0.017 0.038 ESR () 11.1 7.37 4.92 3.40 2.82 1.95 1.62 2.37 1.95 1.11 0.885 0.738 0.885 0.604 0.492 0.341 0.283 0.237 0.604 0.341 0.283 0.196 0.162 0.133 0.403 0.237 0.196 0.162 0.133 0.111 63 Impedance ( max.) 20 -10 1.2 3.6 0.85 2.6 0.55 1.7 0.38 1.1 0.32 0.96 0.24 0.72 0.17 0.51 0.23 0.69 0.17 0.51 0.12 0.36 0.10 0.30 0.085 0.26 0.11 0.33 0.075 0.23 0.065 0.20 0.055 0.17 0.048 0.14 0.042 0.13 0.080 0.24 0.057 0.17 0.052 0.16 0.042 0.13 0.036 0.11 0.032 0.096 0.065 0.20 0.058 0.17 0.050 0.15 0.042 0.13 0.035 0.11 0.032 0.096 Rated voltage (V) Miniature Aluminum Electrolytic Capacitors Case Casing Item DxL (mm) symbol E3 5x11.5 E3 5x11.5 E3 5x11.5 E3 5x11.5 E3 5x11.5 E3 5x11.5 E4 5x15 F3 6.3x11.5 F4 6.3x15 G3 8x12 G4 8x15 G5 8x20 H3 10x12.5 H4 10x16 H5 10x20 H6 10x25 H7 10x30 4 12.5x15 5 12.5x20 6 12.5x25 7 12.5x30 8 12.5x35 9 12.5x40 J4 16x16 J5 16x20 J6 16x25 J7 16x31.5 J8 16x35.5 J9 16x40 K4 18x16 K5 18x20 K6 18x25 K7 18x31.5 K8 18x35.5 K9 18x40 Rated capacitance * * * * * * (F) 27 39 56 82 120 180 220 150 180 330 390 560 330 560 680 1000 1200 1500 560 1000 1200 1800 2200 2700 680 1200 1800 2200 2700 3300 Rated voltage (V) Item Case Casing DxL (mm) symbol E3 5x11.5 E4 5x15 F3 6.3x11.5 F4 6.3x15 G3 8x12 G4 8x15 G5 8x20 H3 10x12.5 H4 10x16 H5 10x20 H6 10x25 H7 10x30 4 12.5x15 5 12.5x20 6 12.5x25 7 12.5x30 8 12.5x35 9 12.5x40 J4 16x16 J5 16x20 J6 16x25 J7 16x31.5 J8 16x35.5 J9 16x40 K4 18x16 K5 18x20 K6 18x25 K7 18x31.5 K8 18x35.5 K9 18x40 Rated capacitance * * * * * * (F) 12 18 27 39 47 68 82 56 68 120 150 180 150 220 270 390 470 560 220 390 470 680 820 1000 330 560 680 820 1000 1200 Rated ripple current Rated capacitance (mArms) 175 235 290 400 488 617 800 625 825 1010 1190 1440 1010 1400 1690 1950 2220 2390 1310 1660 2070 2350 2550 2970 1460 1850 2120 2410 2680 3010 * * * * * * (F) 1 2.2 3.3 4.7 10 18 27 39 56 68 82 120 82 100 180 220 330 180 330 470 560 680 820 330 680 820 1000 1200 1500 470 820 1000 1500 1800 2200 Rated ripple current Rated capacitance (mArms) 120 135 148 153 360 469 682 448 553 676 876 1020 745 979 1180 1310 1470 1590 982 1210 1490 1890 2140 2410 1200 1460 1740 1990 2340 2560 * * * * * * (F) 5.6 8.2 12 18 22 33 39 27 33 56 68 100 68 100 120 180 220 270 120 180 220 330 390 470 150 270 330 390 560 680 ESR () 166 75.4 50.3 35.3 16.6 9.22 6.14 4.25 2.96 2.44 2.02 1.38 2.02 1.66 0.922 0.754 0.503 0.922 0.503 0.353 0.297 0.244 0.203 0.503 0.244 0.203 0.166 0.139 0.111 0.353 0.203 0.166 0.111 0.074 0.073 ESR () 20.7 14.2 9.68 6.45 5.28 3.52 2.98 4.30 3.52 2.07 1.71 1.16 1.71 1.16 0.968 0.646 0.528 0.431 0.968 0.646 0.528 0.352 0.298 0.248 0.775 0.431 0.352 0.298 0.208 0.171 50 Impedance ( max.) 20 -10 3.5 7.0 3.0 6.0 2.6 5.2 2.2 4.4 1.4 2.8 0.95 1.9 0.66 1.32 0.43 0.86 0.33 0.66 0.20 0.40 0.18 0.36 0.13 0.26 0.18 0.36 0.15 0.30 0.085 0.17 0.075 0.15 0.055 0.110 0.095 0.190 0.060 0.120 0.044 0.088 0.040 0.080 0.036 0.072 0.034 0.068 0.065 0.130 0.045 0.090 0.038 0.076 0.032 0.064 0.028 0.056 0.026 0.052 0.048 0.096 0.036 0.072 0.032 0.064 0.026 0.052 0.025 0.050 0.024 0.048 100 Impedance ( max.) 20 -10 1.9 7.6 1.3 5.2 1.1 4.4 0.62 2.5 0.53 2.1 0.35 1.4 0.27 1.1 0.47 1.9 0.32 1.3 0.25 0.1 0.18 0.72 0.15 0.60 0.20 0.80 0.13 0.52 0.11 0.44 0.090 0.36 0.075 0.30 0.060 0.24 0.130 0.52 0.11 0.44 0.081 0.32 0.059 0.23 0.052 0.21 0.045 0.18 0.12 0.48 0.085 0.34 0.071 0.28 0.058 0.23 0.054 0.22 0.041 0.16 Rated ripple current (mArms) 36 54 63 75 110 120 135 148 153 360 460 670 443 553 676 876 1010 745 979 1180 1310 1470 1590 982 1210 1490 1890 2140 2410 1180 1450 1720 1970 2310 2530 Rated ripple current (mArms) 57 74 78 85 275 360 490 319 424 499 634 739 613 805 857 1120 1240 1330 706 916 1290 1630 1750 1920 871 1170 1500 1630 1920 2100 (Note) ESR : 20, 120Hz ; Impedance : 100kHz ; Rated ripple current : 105, 100kHz * : The black circles in the capacitance column denote semi-standard products. CAT.No.2013/2014E 104 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.