600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
Data Sheet
LOW DROPOUT LINEAR REGULATOR AZ1117B
1
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Figure 1. Package Type of AZ1117B
SOT-223
General Description
The AZ1117B is a low dropout three-terminal regula-
tor.
The AZ1117B has been optimized for low voltage
where transient response and minimum input voltage
are critical. It provides current limit and thermal shut-
down. Its circuit includes a trimmed bandgap reference
to assure output voltage accuracy to be within ±1%.
On-chip thermal shutdown provides protection against
a combination of high current and ambient temperature
that would create excessive junction temperature.
The AZ1117B is available in 1.2V, 1.5V, 1.8V, 2.5V,
3.3V, 5.0V fixed output voltage vesions and ADJ out-
put voltage version. The fixed versions integrate the
adjust resistors. It is also available in an adjustable ver-
sion which can set the output voltage with two external
resistors.
The AZ1117B is available in the industry-standard
SOT-223 and SOT-89 power packages.
Features
·Current Limit: 1.0A (Typ.)
·Output Noise from 10Hz to 10KHz: 0.003% of
VOUT
·PSRR at IOUT=300mA and f=120Hz: 70dB
·Output Voltage Accuracy: ±1%
·On-chip Thermal Shutdown
·Maximum Quiescent Current: IQMAX=6mA
·Operation Junction Temperature: -20 to 125oC
Applications
·USB Device
·Add-on Card
·DVD Player
·PC Motherboard
SOT-89
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
Data Sheet
LOW DROPOUT LINEAR REGULATOR AZ1117B
2
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Figure 2. Pin Configuration of AZ1117B (Top View)
H Package
(SOT-223)
Pin Configuration
VOUT
INPUT
OUTPUT
ADJ/GND
1
2
3
R Package
(SOT-89)
1
2
3INPUT
OUTPUT
ADJ/GND
VOUT
Functional Block Diagram
Figure 3. Functional Block Diagram of AZ1117B
Thermal
Protection +
-
For Adjustable Output, disconnect A1 and A2, connect B
INPUT
OUTPUT
ADJ/GND
A1 A2
B
For Fixed Output, connect A1 and A2, disconnect B
2
1
3
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
LOW DROPOUT LINEAR REGULATOR AZ1117B
3
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Data Sheet
Circuit Type
Package
H: SOT-223
ADJ: Adjustable Output
1.8: Fixed Output 1.8V
E1: Lead Free
AZ1117B -
TR: Tape and Reel
Ordering Information
3.3: Fixed Output 3.3V
Package Temperature Range Part Number Marking ID Packing Type
SOT-223 -20 to 125oC
AZ1117BH-ADJTRE1 EH17K Tape & Reel
AZ1117BH-1.2TRE1 EH17P Tape & Reel
AZ1117BH-1.5TRE1 EH17Q Tape & Reel
AZ1117BH-1.8TRE1 EH17L Tape & Reel
AZ1117BH-2.5TRE1 EH17N Tape & Reel
AZ1117BH-3.3TRE1 EH17M Tape & Reel
AZ1117BH-5.0TRE1 EH17R Tape & Reel
SOT-89 -20 to 125oC
AZ1117BR-ADJTRE1 E31F Tape & Reel
AZ1117BR-1.2TRE1 E31G Tape & Reel
AZ1117BR-1.5TRE1 E31H Tape & Reel
AZ1117BR-1.8TRE1 E31J Tape & Reel
AZ1117BR-2.5TRE1 E31K Tape & Reel
AZ1117BR-3.3TRE1 E31L Tape & Reel
AZ1117BR-5.0TRE1 E31M Tape & Reel
2.5: Fixed Output 2.5V
5.0: Fixed Output 5.0V
1.2: Fixed Output 1.2V
1.5: Fixed Output 1.5V
R: SOT-89
BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant.
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
Data Sheet
LOW DROPOUT LINEAR REGULATOR AZ1117B
4
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Absolute Maximum Ratings (Note 1)
Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device.
These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated
under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods
may affect device reliability.
Recommended Operating Conditions
Parameter Symbol Min Max Unit
Input Voltage VIN 15 V
Operating Junction Temperature Range TJ-20 125 oC
Parameter Symbol Valu e Unit
Input Voltage VIN 18 V
Operating Junction Temperature Range TJ150 oC
Storage Temperature Range TSTG -65 to 150 oC
Thermal Resistance (No Heatsink) θJA
SOT-223 150
oC/W
SOT-89 210
Lead Temperature (Soldering, 10sec) TLEAD 260 oC
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
LOW DROPOUT LINEAR REGULATOR AZ1117B
5
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Data Sheet
Parameter Symbol Conditions Min Typ Max Unit
Reference Voltage VREF
1.238 1.250 1.262
V
1.5V≤VIN-VOUT≤10V 1.225 1.250 1.270
Line Regulation VRLINE 1.5V≤VIN-VOUT ≤10V
0.001 0.1
%
0.2
Load Regulation VRLOAD 0.4 1.0 %
Dropout Voltage VDROP ΔVREF=1%, IOUT=0.8A
SOT-223 1.2 1.3
V
SOT-89 1.2
Current Limit ILIMIT 0.85 1 1.15 A
Adjust Pin Current 60 120 μA
Adjust Pin Current
Change
1.5V≤(VIN-VOUT)≤10V 0.2 5μA
Minimum Load Current 1.5V≤(VIN-VOUT)≤10V 1.7 5mA
Ripple Rejection PSRR f=120Hz, COUT=22μF
(VIN-VOUT)=3V, IOUT=300mA 70 dB
Temperature Stability 0.5 %
RMS Output Noise
(% of VOUT)
TA=25oC, 10Hz≤f≤10KHz 0.003 %
Thermal Shutdown Junction Temperature 160 oC
Thermal Shutdown
Hysteresis 16 oC
Thermal Resistance θJC
SOT-223 33 oC/
W
SOT-89 39
Electrical Characteristics
AZ1117B-ADJ Electrical Characteristics
Operating Conditions: VIN=VOUT+2V, IOUT=10mA, TJ=25oC, unless otherwise specified. (P≤maximum power dissipation).
Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC.
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
Data Sheet
LOW DROPOUT LINEAR REGULATOR AZ1117B
6
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Parameter Symbol Conditions Min Typ Max Unit
Output Voltage VOUT
1.176 1.2 1.224
V
3.2V≤VIN≤10V 1.152 1.2 1.228
Line Regulation VRLINE 1.5V≤VIN-VOUT≤10V
0.5 6
mV
10
Load Regulation VRLOAD 215 mV
Dropout Voltage VDROP ΔVOUT=1%, IOUT=0.8A
SOT-223 1.2 1.3
V
SOT-89 1.2
Current Limit ILIMIT 0.85 1 1.15 A
Quiescent Current IQIOUT=0 46mA
Ripple Rejection PSRR f=120Hz, COUT=22μF
(VIN-VOUT)=3V, IOUT=300mA 70 dB
Temperature Stability 0.5 %
RMS Output Noise
(% of VOUT)
TA=25oC, 10Hz≤f≤10KHz 0.003 %
Thermal Shutdown Junction Temperature 160 oC
Thermal Shutdown
Hysteresis 16 oC
Thermal Resistance θJC
SOT-223 33 oC/
W
SOT-89 39
Electrical Characteristics (Continued)
AZ1117B-1.2 Electrical Characteristics
Operating Conditions: VIN≤10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (P≤maximum power dissipation). Limits
appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC.
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
LOW DROPOUT LINEAR REGULATOR AZ1117B
7
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Data Sheet
Parameter Symbol Conditions Min Typ Max Unit
Output Voltage VOUT
1.485 1.5 1.515
V
3.5V≤VIN≤10V 1.470 1.5 1.530
Line Regulation VRLINE 1.5V≤VIN-VOUT≤10V
0.5 6
mV
10
Load Regulation VRLOAD 215 mV
Dropout Voltage VDROP ΔVOUT=1%, IOUT=0.8A
SOT-223 1.2 1.3
V
SOT-89 1.2
Current Limit ILIMIT 0.85 1 1.15 A
Quiescent Current IQIOUT=0 46mA
Ripple Rejection PSRR f=120Hz, COUT=22μF
(VIN-VOUT)=3V, IOUT=300mA 70 dB
Temperature Stability 0.5 %
RMS Output Noise
(% of VOUT)
TA=25oC, 10Hz≤f≤10KHz 0.003 %
Thermal Shutdown Junction Temperature 160 oC
Thermal Shutdown
Hysteresis 16 oC
Thermal Resistance θJC
SOT-223 33 oC/
W
SOT-89 39
Electrical Characteristics (Continued)
AZ1117B-1.5 Electrical Characteristics
Operating Conditions: VIN≤10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (P≤maximum power dissipation). Limits
appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC.
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
Data Sheet
LOW DROPOUT LINEAR REGULATOR AZ1117B
8
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Parameter Symbol Conditions Min Typ Max Unit
Output Voltage VOUT
1.782 1.8 1.818
V
3.8V≤VIN≤10V 1.764 1.8 1.836
Line Regulation VRLINE 1.5V≤VIN-VOUT≤10V
0.5 6
mV
10
Load Regulation VRLOAD 215 mV
Dropout Voltage VDROP ΔVOUT=1%, IOUT=0.8A
SOT-223 1.2 1.3
V
SOT-89 1.2
Current Limit ILIMIT 0.85 1 1.15 A
Quiescent Current IQIOUT=0 46mA
Ripple Rejection PSRR f=120Hz, COUT=22μF
(VIN-VOUT)=3V, IOUT=300mA 70 dB
Temperature Stability 0.5 %
RMS Output Noise
(% of VOUT)
TA=25oC, 10Hz≤f≤10KHz 0.003 %
Thermal Shutdown Junction Temperature 160 oC
Thermal Shutdown
Hysteresis 16 oC
Thermal Resistance θJC
SOT-223 33 oC/W
SOT-89 39
Electrical Characteristics (Continued)
AZ1117B-1.8 Electrical Characteristics
Operating Conditions: VIN≤10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (P≤maximum power dissipation). Limits
appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC.
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
LOW DROPOUT LINEAR REGULATOR AZ1117B
9
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Data Sheet
Parameter Symbol Conditions Min Typ Max Unit
Output Voltage VOUT
2.475 2.5 2.525
V
4.5V≤VIN≤10V 2.455 2.5 2.545
Line Regulation VRLINE 1.5V≤VIN-VOUT≤10V
0.5 6
mV
10
Load Regulation VRLOAD 215 mV
Dropout Voltage VDROP ΔVOUT=1%, IOUT=0.8A
SOT-223 1.2 1.3
V
SOT-89 1.2
Current Limit ILIMIT 0.85 1 1.15 A
Quiescent Current IQIOUT=0 46mA
Ripple Rejection PSRR f=120Hz, COUT=22μF
(VIN-VOUT)=3V, IOUT=300mA 70 dB
Temperature Stability 0.5 %
RMS Output Noise
(% of VOUT)
TA=25oC, 10Hz≤f≤10KHz 0.003 %
Thermal Shutdown Junction Temperature 160 oC
Thermal Shutdown
Hysteresis 16 oC
Thermal Resistance θJC
SOT-223 33 oC/W
SOT-89 39
Electrical Characteristics (Continued)
AZ1117B-2.5 Electrical Characteristics
Operating Conditions: VIN≤10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (P≤maximum power dissipation). Limits
appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC.
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
Data Sheet
LOW DROPOUT LINEAR REGULATOR AZ1117B
10
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Parameter Symbol Conditions Min Typ Max Unit
Output Voltage VOUT
3.267 3.3 3.333
V
5.3V≤VIN≤10V 3.235 3.3 3.365
Line Regulation VRLINE 1.5V≤VIN-VOUT≤10V
0.5 6
mV
10
Load Regulation VRLOAD 215 mV
Dropout Voltage VDROP ΔVOUT=1%, IOUT=0.8A
SOT-223 1.2 1.3
V
SOT-89 1.2
Current Limit ILIMIT 0.8511.15
A
Quiescent Current IQIOUT=0 46mA
Ripple Rejection PSRR f=120Hz, COUT=22μF
(VIN-VOUT)=3V, IOUT=300mA 70 dB
Temperature Stability 0.5 %
RMS Output Noise
(% of VOUT)
TA=25oC, 10Hz≤f≤10KHz 0.003 %
Thermal Shutdown Junction Temperature 160 oC
Thermal Shutdown
Hysteresis 16 oC
Thermal Resistance θJC
SOT-223 33 oC/W
SOT-89 39
Electrical Characteristics (Continued)
AZ1117B-3.3 Electrical Characteristics
Operating Conditions: VIN≤10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (P≤maximum power dissipation). Limits
appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC.
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
LOW DROPOUT LINEAR REGULATOR AZ1117B
11
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Data Sheet
Parameter Symbol Conditions Min Typ Max Unit
Output Voltage VOUT
4.950 5.0 5.050
V
6.5V≤VIN≤10V 4.900 5.0 5.100
Line Regulation VRLINE 1.5V≤VIN-VOUT≤10V
0.5 6
mV
10
Load Regulation VRLOAD 215 mV
Dropout Voltage VDROP ΔVOUT=1%, IOUT=0.8A
SOT-223 1.2 1.3
V
SOT-89 1.2
Current Limit ILIMIT 0.85 1 1.15 A
Quiescent Current IQIOUT=0 46mA
Ripple Rejection PSRR f=120Hz, COUT=22μF
(VIN-VOUT)=3V, IOUT=300mA 70 dB
Temperature Stability 0.5 %
RMS Output Noise
(% of VOUT)
TA=25oC, 10Hz≤f≤10KHz 0.003 %
Thermal Shutdown Junction Temperature 160 oC
Thermal Shutdown
Hysteresis 16 oC
Thermal Resistance θJC
SOT-223 33 oC/W
SOT-89 39
Electrical Characteristics (Continued)
AZ1117B-5.0 Electrical Characteristics
Operating Conditions: VIN≤10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (P≤maximum power dissipation). Limits
appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC.
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
Data Sheet
LOW DROPOUT LINEAR REGULATOR AZ1117B
12
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Typical Performance Characteristics
Figure 5. Load Regulation vs. Junction TemperatureFigure 4. Line Regulation vs. Junction Temperature
Figure 6. Reference Voltage vs. Junction Temperature Figure 7. Output Voltage vs. Junction Temperature
-20 0 20 40 60 80 100 120
-25
-20
-15
-10
-5
0
5
10
Load Regulation (mV)
Junction Temperature (oC)
AZ1117B-2.5V
VIN=4.5V
IOUT=10mA to 800mA
-20 0 20 40 60 80 100 120
1.220
1.225
1.230
1.235
1.240
1.245
1.250
1.255
1.260
1.265
1.270
AZ1117B-ADJ
VIN=4.5V
IOUT=10mA
Reference Voltage (V)
Junction Temperature (oC)
Reference Voltage
-20 0 20 40 60 80 100 120
2.40
2.42
2.44
2.46
2.48
2.50
2.52
2.54
2.56
2.58
2.60
AZ1117B-2.5V
VIN=4.5V
IOUT=10mA
Output Voltage (V)
Junction Temperature (oC)
-20 0 20 40 60 80 100 120
-0.4
-0.2
0.0
0.2
0.4
Line Regulation (mV)
Junction Temperature (oC)
AZ1117B-2.5V
VIN=4.5V to 10V
IOUT=10mA
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
LOW DROPOUT LINEAR REGULATOR AZ1117B
13
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Data Sheet
Figure 11. Power Dissipation vs. Case Temperature
Figure 10. Dropout Voltage vs. Output Current
Typical Performance Characteristics (Continued)
Figure 8. Minimum Load Current vs. Junction Temperature Figure 9. Adjust Pin Current vs. Junction Temperature
-20 0 20 40 60 80 100 120
-2
-1
0
1
2
3
AZ1117B-ADJ
VIN=4.5V
Minimum Load Current (mA)
Junction Temperature (oC)
Minimum Load Current
-20 0 20 40 60 80 100 120
0
10
20
30
40
50
60
70
80
90
100
AZ1117B-ADJ
VIN=4.5V
Adjust Pin Current (μA)
Junction Temperature (oC)
-20 0 20 40 60 80 100 120
0
1
2
3
4
5
6
7
8
9
10
AZ1117-2.5V
SOT-223
No Heatsink
Power Dissipation (W)
Case Temperature (oC)
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
Data Sheet
LOW DROPOUT LINEAR REGULATOR AZ1117B
14
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Figure 12. Line Transient Response Figure 13. Load Transient Response
Figure 14. PSRR vs. Frequency Figure 15. Current Limit vs. Junction Temperature
10 100 1k 10k 100k
10
20
30
40
50
60
70
80
PSRR (dB)
Frequency (Hz)
Typical Performance Characteristics (Continued)
Time (20μs/Div) Time (10μs/Div)
Δ
V
OUT
(0.1V/Div)
5.3
4.8
V
IN
(0 . 5 V/ D i v)
-0.1
4.3
3.8
0.1
0.2
0
Δ
V
OUT
(50mV/Div)
I
OUT
(0.3A/Div)
0.3
0
-50
-0.3
-0.6
50
100
0
0.6
10mA
-20 0 20 40 60 80 100 120
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
Current Limit (A)
Junction Temperature (oC)
AZ1117B-2.5V
VIN=4.5V
No Heatsink
@VOUT=VOUT(nom)x98%
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
LOW DROPOUT LINEAR REGULATOR AZ1117B
15
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Data Sheet
Typical Performance Characteristics (Continued)
-20 0 20 40 60 80 100
0.8
0.9
1.0
1.1
1.2
1.3
1.4
Dropout Voltage (V)
Junction Temperature (oC)
AZ1117B-2.5
100mA
400mA
600mA
800mA
SOT-223
Figure 16. Dropout Voltage vs. Junction Temperature
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
Data Sheet
LOW DROPOUT LINEAR REGULATOR AZ1117B
16
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Typical Applications
Figure 17. Typical Applications of AZ1117B
AZ1117B-ADJ
VIN VOUT
ADJ
VIN=11V
10μF
R1
124Ω
R2
768Ω
22μF
9V
++
++
VIN=5.3V AZ1117B-3.3
VIN VOUT
GND
10μF22μF
3.3V
VOUT=VREF * ( 1+R2/R1) + IADJ * R2
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
LOW DROPOUT LINEAR REGULATOR AZ1117B
17
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Data Sheet
Mechanical Dimensions
SOT-223 Unit: mm(inch)
3.300(0.130)
3.700(0.146)
6.700(0.264)
7.300(0.287)
2.900(0.114)
3.100(0.122)
0.610(0.024)
0.810(0.032)
2.300(0.091)
TYP
6.300(0.248)
6.700(0.264)
1.750(0.069)
TYP
4.500(0.177)
4.700(0.185)
0.020(0.001)
0.100(0.004)
1.520(0.060)
1.800(0.071)
1.500(0.059)
1.700(0.067)
0.250(0.010)
0.350(0.014)
0.250(0.010)
0°
10°
0.900(0.035)
MIN
600mA LOW DROPOUT LINEAR REGULATOR AP2317 600mA LOW DROPOUT LINEAR REGULATOR AP1117M
Data Sheet
LOW DROPOUT LINEAR REGULATOR AZ1117B
18
Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited
Mechanical Dimensions (Continued)
Unit: mm(inch)SOT-89
45
1.030(0.041)REF
1.550(0.061)REF
4.400(0.173)
4.600(0.181)
0.900(0.035)
1.100(0.043)
3.950(0.156)
4.250(0.167)
3.000(0.118)
TYP
0.480(0.019)
2.300(0.091)
2.600(0.102)
0.320(0.013)
0.520(0.020)
310
2.060(0.081)REF
1.400(0.055)
1.600(0.063)
0.350(0.014)
0.450(0.018)
R0.150(0.006)
3
10
1.500(0.059)
0.320(0.013)REF
1.620(0.064)REF
2.210(0.087)REF
0.320(0.013)
0.520(0.020)
1.800(0.071)
IMPOR TANT NOTICE
BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifi-
cations herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility fo r use of any its products for any
particular purpose, nor does BCD Semiconductor Man ufacturing Limited assume any liability arising out of the application or use
of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or
other rights nor the rights of others.
- Wafer Fab
Shanghai SIM-BCD Semiconductor Manufacturing Limited
800, Yi Shan Road, Shanghai 200233, China
Tel: +86-21-6485 1491, Fax: +86-21-5450 0008
BCD Semiconductor Manufacturing Limited
MAIN SITE
REGIONAL SALES OFFICE
Shenzhen Office
Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. Shenzhen Office
Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office
Room E, 5F, Noble Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China
Tel: +86-755-8826 7951
Fax: +86-755-8826 7865
Taiwan Office
BCD Semiconductor (Taiwan) Company Limited
4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei,
Taiwan
Tel: +886-2-2656 2808
Fax: +886-2-2656 2806
USA Office
BCD Semiconductor Corporation
30920 Huntwood Ave. Hayward,
CA 94544, U.S.A
Tel : +1-510-324-2988
Fax: +1-510-324-2788
- IC Design Group
Advanced Analog Circuits (Shanghai) Corporation
8F, Zone B, 900, Yi Shan Road, Shanghai 200233, China
Tel: +86-21-6495 9539, Fax: +86-21-6485 9673
BCD Semiconductor Manufacturing Limited
http://www.bcdsemi.com
BCD Semiconductor Manufacturing Limited
IMPORTANT NOTICE
BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifi-
cations herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any
particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use
of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or
other rights nor the rights of others.
- Wafer Fab
Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.
800 Yi Shan Road, Shanghai 200233, China
Tel: +86-21-6485 1491, Fax: +86-21-5450 0008
MAIN SITE
REGIONAL SALES OFFICE
Shenzhen Office
Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd., Shenzhen Office
Unit A Room 1203, Skyworth Bldg., Gaoxin Ave.1.S., Nanshan District, Shenzhen,
China
Tel: +86-755-8826 7951
Fax: +86-755-8826 7865
Taiwan Office
BCD Semiconductor (Taiwan) Company Limited
4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei,
Taiwan
Tel: +886-2-2656 2808
Fax: +886-2-2656 2806
USA Office
BCD Semiconductor Corp.
30920 Huntwood Ave. Hayward,
CA 94544, USA
Tel : +1-510-324-2988
Fax: +1-510-324-2788
- Headquarters
BCD Semiconductor Manufacturing Limited
No. 1600, Zi Xing Road, Shanghai ZiZhu Science-based Industrial Park, 200241, China
Tel: +86-21-24162266, Fax: +86-21-24162277