M12 PushPull Accessories Identification Part number Drawing Crimping tool for M12 PushPull Circular Connectors 09 99 000 0501 Accessories M12 PushPull D-Sub contacts Part number Locator for D-Sub contacts 09 99 000 0531 for contact 21 01 100 9020 61 03 600 0023 for har-speed contacts 09 99 000 0525 AWG Tool settings 18 6 09 67 000 3x76 20 6 22 5 09 67 000 8x76 20, 22, 24 6 09 67 000 5x76 22, 24, 26 6 Part number AWG Tool settings 28 3 21 01 100 9014 26 4 24 5 26 4 24 5 23 5 har-speed contacts 21 01 100 9019 D-Sub single contacts (500 mating cycles) turned male contacts AWG 22 - 18 / 0.33 - 0.82 mm AWG 24 - 20 / 0.25 - 0.52 mm AWG 26 - 22 / 0.13 - 0.33 mm AWG 28 - 24 / 0.09 - 0.25 mm 09 67 000 3576 09 67 000 8576 09 67 000 5576 09 67 000 7576 turned male contact for 8 pole connector, A-coding, AWG 26 - 22 21 01 100 9020 Single contacts (500 mating cycles) 03 122 har-speed M12 contacts AWG 28-24 / 0.08-0.22 mm 21 01 100 9014 har-speed M12 contacts AWG 26-23 / 0.13-0.25 mm 21 01 100 9019 Further information and data sheets see www.HARTING.com AWG 22 - 18 AWG 24 - 20 AWG 26 - 22 a 1.34 1.13 0.88