Keysight Technologies
DSO1000A/B Series
Portable Oscilloscopes
Data Sheet
Engineered to give you more scope
than you thought you could afford
More scope than you thought you could afford
Keysight Technologies, Inc. 1000 Series oscilloscopes deliver the performance and
features you expect in a big scope –
and the portability and low price you require in a
and display, advanced measurement capabilities and accelerated productivity.
Whether your job is designing products in R&D, teaching the next generation
in education, or testing in manufacturing or service, the new 1000 Series
For more information, visit www.keysight.com/find/DSO1000
R&D Education Manufacturing
Weighing less than 7 pounds with a small
footprint, the 1000 Series can go anywhere
with ease.
Figure 1. Features normally only found on
much higher priced scopes equip the 1000
Series to be a powerful choice for R&D ap-
plications.
Figure 2. Economical prices make the 1000
engineering measurements at lab stations
in schools and universities.
Figure 3. Standard go/no-go mask testing is
just one of the reasons manufacturing and
service test demand 1000 Series solutions.
2-channel models
DSO1052B 50 MHz
DSO1072B 70 MHz
DSO1102B 100 MHz
DSO1152B 150 MHz
DSO1022A 200 MHz
4-channel models
DSO1004A 60 MHz
DSO1014A 100 MHz
DSO1024A 200 MHz
02 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
Powerful signal capture and display
Capture long time periods with high resolution
1000A Series models provide up to 20 kpts and 1000B models provide up to
16 kpts of acquisition memory standard. The scope will maintain high-reso-
lutionacquisitions even at slower timebase settings so you can see the details
on your signals.
See your signals more clearly
Every 1000 Series scope incorporates a bright, crisp LCD color display (300
cd/m2). You can quickly view your signal from almost any angle. Unlike
conventional scopes that always require menus to be on, the entire 5.7-inch
diagonal screen is available for full waveform display as needed.
Simultaneous viewing of main and zoomed waveforms
Dual display shows your entire signal and zoomed in
waveform details at the same time.
– Wide viewing angle, bright color display
– Up to 20 kpts memory, up to 8x more than other scope
– Up to 2 GSa/s sample rate
– Simultaneous viewing of main and zoomed waveforms
– 25% more viewing area with menus switched off
Figure 4. The bright, crisp display on the 1000 Series
oscilloscope and its wide viewing angle let you
quickly identify your signal activity.
Figure 5. Turning off the menu gives almost 25% more
viewing area for your signals.
Figure 6. View a long record and the details of a
zoom window simultaneously.
03 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
Advanced measurement capability
23 automatic measurements
All 1000 Series scopes come equipped with 23 automatic voltage, time and
frequency measurements. Press the Measure key to bring up the three you
use most often or display all single-channel measurements on the screen
simultaneously.
Sequence mode for easier debug
Record up to 1000 occurrences of a trigger event and then play them back
to easily spot glitches or other anomalies for further examination. Store the
-
Frequency limits are selectable between 250 Hz and the full bandwidth of
your oscilloscope.
Advanced triggering
Triggering options for the 1000 Series include edge, pulse width, compos-
ite video, pattern (“A” models only) and alternate channel trigger modes.
conditions.
Remote programming (Only available on “A” models)
For remote instrument control over the built-in USB device port, utilize
Keysight’s I/O libraries with direct command control from Keysight VEE
Pro, or National Instrument’s I/O libraries and available instrument drivers
include Plug and Play for LabView and IVI for LabVIEW, LabWindows/CVI,
and Measurement Studio for Visual Studio.
– 23 automatic measurements
– Waveform math including FFT
– Standard go/no-go mask testing
– Sequential acquisition of up to 1000 trigger events
– Selectable high-pass, low-pass, band-pass, and band-reject
Figure 7. Display all single-channel
measurements on screen simultaneously.
Figure 8. Use sequence mode to record up to 1000
triggers and review in playback mode for anomalies.
Figure 9. The Ch 1 waveform (Yellow)
waveform (Green) shows the same input
Segment 1
Segment 2
Segment 1000
04 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
Accelerated productivity
– Autoscale
– 11-Language localization of user interface, front panel controls,
and manuals
– Context-sensitive built-in help menus
– USB connectivity
– Free education student lab guide and professor slide set
Make fast go/no-go decisions
Automatic pass/fail mask testing comes as a standard feature on all 1000 Series
envelope. Create custom mask’s based on XY tolerances and input those into
the scope. Incoming signals will be compared to the allowable range and quickly
to make decisions quickly.
Waveform math and FFT
Standard math functions include addition, subtraction or multiplication of any
two input channels and Fast Fourier Transform (FFT) with four user-selectable
windows (Rectangle, Hanning, Hamming and Blackman).
Multi-language interface
Operate the oscilloscope in the language most familiar to you. The built-in
help system, graphical user interface, front panel overlays and user’s manual
Chinese, traditional Chinese, Korean, German, French, Spanish, Russian, Portu-
guese, and Italian.
Autoscale
Quickly display any active signals and automatically set the vertical, horizontal
and trigger controls for optimal viewing with the press of the autoscale button.
(This feature can be disabled or enabled for education customers).
Connectivity
Built-in USB host and device ports and free IntuiLink software make documenta-
Microsoft Word or Excel, and print to any PictBridge compatible printer.
Education Resource Kit
Keysight provides a variety of oscilloscope resource training tools to help your
EE students come up-to-speed on what an oscilloscope is and how to use one.
Downloadable resources include: EE student’s oscilloscope lab guide and tuto-
rial, Professor’s Oscilloscope Fundamentals slide-set, probe loading experiment
and oscilloscope application notes.
Figure 10. Mask testing provides a quick pass/fail
comparison of an incoming signal to a test envelope
Figure 11. Built-in FFT enables easy spectral analysis
on the time-domain signal.
Figure 12. Choose from 11 different languages for
oscilloscope interface and help.
05 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
Keysight 1000A Series portable oscilloscopes:
Engineered to give you more scope than you thought you could afford
Powerful Signal Capture and Display
Bright and crisp 5.7-inch color LCD
display with wide angle viewing
Acquisition memory bar shows full 20 kpts
of memory and highlights portion displayed
Turn menu off for almost 25% more viewing area
(or set to turn off automatically on timeout)
Sturdy snap handle
for easy carrying
Two USB host ports facilitate saving
Secure with a Kensington
lock or looped cable USB device port for USBTMC remote PC
control also allows easy printing to all Pict-
Bridge compatible printers
Secure with
cable lock
06 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
Advanced Measurement Capabilities
Accelerated Productivity
User-friendly menu facilitates access
to advanced features like mask test,
Multi-language interface support and built-in
context-sensitive help in 11 languages
Default setup quickly returns the
scope to a known starting point
Measurement cursors can be placed manually or
automatically
23 automatic measurements with a “measure
all” feature
Comprehensive trigger functions including
edge, pulse width, pattern (“A” models only),
composite video and alternate channel
Push-button knobs enhance usability, for example,
the Main/Zoom knob zooms in on a particular sec-
tion of waveform. Push to toggle zoom on and off.
Four math functions
for quick display:
+, -, x, FFT
Save up to 10 setups and waveform memories
internally
AutoScale to get your signal on screen fast
with vertical, horizontal, and trigger controls
automatically adjusted for best signal display
07 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
Keysight 1000B Series portable oscilloscopes:
Engineered to give you more scope than you thought you could afford
Powerful Signal Capture and Display
Bright and crisp 5.7-inch color LCD
display with wide angle viewing
Acquisition memory bar shows
full 16 kpts of memory and
highlights portion displayed
Turn menu off for almost 25%
more viewing area (or set to turn
off automatically on timeout)
USB device port
Secure with
cable lock
USB host port facilitates saving data to a USB
MaskTesting
Pass/Fail
BNC output
Sturdy snap handle
for easy carrying
Secure with a Kensington
lock or looped cable
08 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
Advanced Measurement Capabilities
Accelerated Productivity
User-friendly menu facilitates access
to advanced features like mask test,
Multi-language interface support and built-in
context-sensitive help in 11 languages
Default setup quickly returns the
scope to a known starting point
Measurement cursors can be placed
manually or automatically
23 automatic measurements with a
“measure all” feature
Comprehensive trigger functions including
edge, pulse width, pattern (“A” models only),
composite video and alternate channel
Push-button knobs enhance usability, for
example, the Main/Zoom knob zooms in on a
particular section of waveform. Push to toggle
zoom on and off.
Four math
functions for quick
display: +, -, x, FFT
Save up to 10 setups and waveform
memories internally
AutoScale to get your signal on screen fast
with vertical, horizontal, and trigger controls
automatically adjusted for best signal display
09 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
Performance characteristics
Bandwidth (-3dB)1, 2 DSO1052B: DC to 50 MHz
DSO1002A, DSO1004A: DC to 60 MHz
DSO1072B: DC to 70 MHz
DSO1102B, DSO1012A, DSO1014A: DC to 100 MHz
DSO1152B: DC to 150 MHz
DSO1022A, DSO1024A: DC to 200 MHz
Real-time sample rate 2 GSa/sec half channel interleaved, 1 GSa/sec all channels (A models)
1 GSa/sec half channel interleaved, 500 MSa/sec all channela (B models)
Memory depth 20 kpts half channel interleaved, 10 kpts all channels (A models)
16 kpts half channel interleaved, 8 kpts all channels (B models)
Channels DSO1052B, DSO1002A, DSO1072B, DSO1102B, DSO1012A, DSO1152B, DSO1022A : 2 channels
DSO1004A, DSO1014A, DSO1024A : 4 channels
Vertical resolution 8 bits
Vertical sensitivity (range) 2 mV/div to 10 V/div
DC gain accuracy12 mV/div to 5 mV/div: ± 4.0% full scale (A and B models)
10 mV/div to 5 V/div: ± 3.0% full scale (A models only)
10 mV/div to 10 V/div: ± 3.0% full scale (B models only)
Vertical zoom Vertical expand
Maximum input voltage CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6kVpk
Dynamic range +6 divisions from center screen
Time-base range DSO1022A, DSO1024A: 1 nsec/div to 50 sec/div
DSO1012A, DSO1014A, DSO1102B: 2 nsec/div to 50 sec/div
DSO1002A, DSO1004A, DSO1052B, DSO1072B: 5 nsec/div to 50 sec/div
Selectable BW limit 20 MHz
Horizontal modes Main (Y-T), XY, delayed zoom and roll
Input coupling DC, AC and ground
Input impedance 1 MΩ ±1% in parallel with 18 pF ± 3 pF (A models)
1 MΩ ±2% in parallel with 15 pF ± 3 pF (B models)
Time scale accuracy1± 50 ppm from 0 °C to 30 °C, (A models)
± 50 ppm + 2 ppm per °C from 30 °C to 45 °C + 5 ppm × (years since manufacture) (A models)
± 50 ppm over 1 ms (B models only)
10 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10°C from firmware calibration temperature.
2. 20 MHz (when vertical scale is set to < 5 mV)
Performance characteristics
Acquisition modes
Normal
Averaging
Sequence
Peak Detect
Roll
Displays sampled data directly to the screen in real time
Selectable from 2, 4, 8,16, 32, 64, 128 or 256
Selectable 1 to 1,000 acquisition frames can be recorded, played back and stored in the scope memory or
external USB memory
Captures high-frequency glitches as narrow as 10 nsec (A models) and 20 nsec (B models) when viewing
signals at slow sweep speeds
Waveform display rolls from right to left. minimum horizontal scale setting is 50 msec/div.
Interpolation Sin (x)/x
Trigger coupling AC, DC, LF reject, HF reject
Trigger modes
Force
Edge
Video
Pulse width
Alternate
Triggers immediately when front panel button is pressed
Triggers on the positive and/or negative slope on any channel
Triggers on NTSC, PAL or SECAM video signals
Triggers on pulse width greater than, equal to or less than a specific time limit, ranging from
20 nsec to 10 sec (A models) and 50ns to 10 sec (B models)
Triggers on two non-synchronized active channels
Trigger source Ch 1, 2, Ext, Ext/5, AC Line (edge only) (2 channel A models)
Ch 1, 2, Ext, AC Line (edge only) (B Models)
Ch 1, 2, 3, 4, Ext, Ext/5, AC Line (edge only) (4-channel A models)
Trigger sensitivity1≥5 mV/div: 1 div from DC to 10 MHz, 1.5 div from 10 MHz to full bandwidth
<5 mV/div: 1 div from DC to 10 MHz, 1.5 div from 10 MHz to 20 MHz
Cursor measurement Manual, track waveform or automatic measurement selections. Manual and track waveform selections provide
readout of Horizontal (X, DX) and Vertical (Y, DY)
Auto measurement
Voltage
Time
Counter
Maximum, minimum, peak-to-peak, top, base, amplitude, average, RMS, overshoot, preshoot
Period, frequency, rise time, fall time, + width, - width, +duty cycle, -duty cycle, delay A-->B (rising edge),
delay A-->B (falling edge), phase A-->B (rising edge) and phase A-->B (falling edge)Integrated 6-digit
frequency counter on any channel. Counts up to the scope’s bandwidth
Display all measurements Mode to display all single-channel automatic measurements simultaneously on the display
Math Functions A+B, A-B, AxB, FFT
Source channel selection for A and B can be any combination of oscilloscope channels 1 and 2
(or 3 and 4 on 4 channel A models).
Auto Scale Finds and displays all active channels, sets edge trigger modes on highest numbered channels, sets vertical
sensitivity on channels, time base to display ~2 periods. Requires minimum voltage >20 mVpp, 1% duty cycle
and minimum frequency >50 Hz
Display
Display persistence
Display types
5.7 inch diagonal color QVGA TFT LCD display with 300 cd/m2 backlight intensity
OFF, Infinite
Dots, Vectors
Waveform update rate 400 waveforms/sec (A models)
200 wfm/sec (B models)
Save/Recall internal 10 setups and 10 waveforms can be saved and recalled using internal non-volatile memory locations. 1 refer-
ence waveform can be saved and recalled using an internal volatile memory location for visual comparisons.
Save/Recall external Setups: STP saved and recalled (Note: setups not transferable between A and B models)
Waveforms: WFM saved and recalled, CSV saved
Reference waveforms: REF saved and recalled for visual comparisons
Images: 8-bit BMP, 24-bit BMP, PNG saved
1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10°C from firmware calibration temperature.
11 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
Performance characteristics
I/O
Standard ports USB 2.0-compliant host port on front panel (A and B models) and rear panel (A models only) compatible with
USB flash drives.
USB 2.0 device port for PictBridge compatible printing (A and B models) and USBTMC remote PC control (A mod-
els only)
Max transfer rate USB 2.0 full-speed up to 12 Mb/sec
USB flash drive compatibility Most FAT formatted <2 GB or FAT32 formatted <32 GB flash drives
Printer compatibility PictBridge-compliant printers via USB device port
General characteristics
Physical size 12.78 inches W x 6.21 inches H x 5.08 inches D (32.46 cm W x 15.78 cm H x 12.92 cm D) (A models)
11.9 inches W x 6.06 inches H x 5.23 inches D (30.3 cm W X 15.4 cm H X 13.3 cm D) (B models)
Weight Net: 3.03 kgs (6.68 lbs) Shipping: 4.87 kgs (10.74 lbs) (A models)
Net: 2.4 kgs (5.3lbs) Shipping: 3.87 kgs (8.3lbs) (B models)
Probe comp output Frequency ~1 kHz; Amplitude ~3 V
Scope lock Secure with a Kensington lock or looped cable through notch built into chassis
Power requirements
Line range 100-240 VAC, 50/60 Hz ± 10%
Power usage ~60 W max (A models)
~50 W max (B models)
Environmental characteristics (A models)
Ambient temperature Operating 0°C to +40°C; non-operating -20°C to +60°C
Humidity Operating 90% RH at 40°C for 24 hr; non-operating 60% RH at 60°C for 24 hr
Altitude Operating to 4,400 m (15,000 ft); non-operating to 15,000 m (49,213 ft)
Vibration Keysight class GP and MIL-PRF-28800F; class 3 random
Shock Keysight class GP and MIL-PRF-28800F
Pollution degree2Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation must be expected
Indoor use Rated for indoor use only
Environmental characteristics (B models)
Ambient temperature Operating 10°C to +40°C; non-operating -20°C to +60°C
Cooling Method Fan force air flow
Humidity Operating; +35°C or below ≤90 % relative humidity ; non-operating +40°C ≤60 % relative humidity
Altitude Operating Operating to 3,000 m (9.842 ft); non-operating to 15,000 m (49,213 ft)
Vibration Keysight class GP and M-PRF-28800F; class 3 random
Shock Keysight class GP and M-PRF-28800F;
Pollution degree2Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation must be expected
Regulatory Safety - UL61010-1:2003, CSA22.2 No. 61010-1:2003, EN61010-1:2001, IEC61010-1:2001.
EMI – Passes IEC 61236 -1:2004 / EN 61326-1:2006 Meets EU EMC Directive 2004/108/EC requirements
Indoor use Rated for indoor use only
12 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
Ordering information
Soft carrying case for 1000 Series
Rackmount kit for 1000A Series only
2 - Channel Models Description
DSO1052B 50 MHz, 1 GSa/s, 16 kpts, 2-ch
DSO1072B 70 MHz, 1 GSa/s, 16 kpts, 2-ch
DSO1102B 100 MHz, 1 GSa/s, 16 kpts, 2-ch
DSO1152B 150 MHz, 1 GSa/s, 16 kpts, 2-ch
DSO1022A 200 MHz, 2 GSa/s, 20 kpts, 2-ch
4 - Channel Models Description
DSO1004A 60 MHz, 2 GSa/s, 20 kpts, 4-ch
DSO1014A 100 MHz, 2 GSa/s, 20 kpts, 4-ch
DSO1024A 200 MHz, 2 GSa/s, 20 kpts, 4-ch
Optional accessories:
– N2738A Soft carrying case for 1000A/B Series
– N2739A Rackmount kit for 1000A Series (A models only)
Recommended probes
– N2862B 150 MHz 10:1 passive probe (standard with 50, 60, 70, 100 MHz models)
– N2863B 300 MHz 10:1 passive probe (standard with 150, 200 MHz models)
– 10070D 20 MHz 1:1 passive probe
– 10076B 250 MHz, 100:1, 4 kV passive probe
–
N2771B 50 MHz, 1000:1 30 kV passive probe
–
N2791A 25 MHz, 700V differential probe
–
N2891A
70 MHz, 7 kV differential probe
– 1146A 100 kHz, 100A AC/DC current probe (requires 9V battery)
Software and Drivers
– IntuiLink toolbar connectivity software downloadable free from www.keysight.com/find/intuilink
Accessories included:
– IntuiLink toolbar connectivity software downloadable free from www.keysight.com/find/intuilink
– Documentation CD
– Localized front panel overlay (if language option other than English is chosen)
– Power cord
– 10:1 passive probe for each input channel (2 or 4)
– Education student lab guide and professor slide set downloadable free from:
www.Keysight.com/find/1000edu
13 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
www.axiestandard.org
AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an
open standard that extends the AdvancedTCA for general purpose and
semiconductor test. Keysight is a founding member of the AXIe consortium.
ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of
the PCI Industrial Computer Manufacturers Group.
www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the
Web inside your test systems. Keysight is a founding member of the LXI
consortium.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a
rugged, PC-based high-performance measurement and automation system.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s commitment to superior product quality and lower total cost
of ownership. The only test and measurement company with three-year
warranty standard on all instruments, worldwide.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to five years of protection and no budgetary surprises to ensure your
instruments are operating to specification so you can rely on accurate
measurements.
www.keysight.com/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2008
Quality Management System
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
www.keysight.com/find/DSO1000A/B
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada (877) 894 4414
Brazil 55 11 3351 7010
Mexico 001 800 254 2440
United States (800) 829 4444
Australia 1 800 629 485
China 800 810 0189
Hong Kong 800 938 693
India 1 800 112 929
Japan 0120 (421) 345
Korea 080 769 0800
Malaysia 1 800 888 848
Singapore 1 800 375 8100
Taiwan 0800 047 866
Other AP Countries (65) 6375 8100
Europe & Middle East
Austria 0800 001122
Belgium 0800 58580
Finland 0800 523252
France 0805 980333
Germany 0800 6270999
Ireland 1800 832700
Israel 1 809 343051
Italy 800 599100
Luxembourg +32 800 58580
Netherlands 0800 0233200
Russia 8800 5009286
Spain 0800 000154
Sweden 0200 882255
Switzerland 0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
United Kingdom 0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-07-01-14)
14 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet
This information is subject to change without notice.
© Keysight Technologies, 2012 - 2014
Published in USA, August 2, 2014
5989-9368EN
www.keysight.com
