12/13/04
IRFR420APbF
IRFU420APbF
SMPS MOSFET
HEXFET® Power MOSFET
lSwitch Mode Power Supply (SMPS)
lUninterruptible Power Supply
lHigh speed power switching
lLead-Free
Benefits
Applications
lLow Gate Charge Qg results in Simple
Drive Requirement
lImproved Gate, Avalanche and dynamic
dv/dt Ruggedness
lFully Characterized Capacitance and
Avalanche Voltage and Current
lEffective COSS specified (See AN 1001)
VDSS RDS(on) max ID
500V 3.03.3A
Absolute Maximum Ratings
PD - 95075A
Parameter Typ. Max. Units
EAS Single Pulse Avalanche Energy––– 140 mJ
IAR Avalanche Current––– 2.5 A
EAR Repetitive Avalanche Energy––– 5.0 mJ
Avalanche Characteristics
Parameter Typ. Max. Units
RθJC Junction-to-Case ––– 1.5
RθCS Case-to-Sink, Flat, Greased Surface 0.50 ––– °C/W
RθJA Junction-to-Ambient ––– 62
Thermal Resistance
D-Pak
IRFR420A I-Pak
IRFU420A
Parameter Max. Units
ID @ TC = 25°C Continuous Drain Current, VGS @ 10V 3.3
ID @ TC = 100°C Continuous Drain Current, VGS @ 10V 2.1 A
IDM Pulsed Drain Current 10
PD @TC = 25°C Power Dissipation 83 W
Linear Derating Factor 0.67 W/°C
VGS Gate-to-Source Voltage ± 30 V
dv/dt Peak Diode Recovery dv/dt 3.4 V/ns
TJOperating Junction and -55 to + 150
TSTG Storage Temperature Range
Soldering Temperature, for 10 seconds 300 (1.6mm from case )
Document Number: 91274
www.vishay.com
1
IRFR/U420APbF
Parameter Min. Typ. Max. Units Conditions
gfs Forward Transconductance 1.4 ––– ––– S VDS = 50V, ID = 1.5A
QgTotal Gate Charge –– –– 17 I D = 2.5A
Qgs Gate-to-Source Charge ––– ––– 4.3 nC VDS = 400V
Qgd Gate-to-Drain ("Miller") Charge ––– ––– 8.5 VGS = 10V, See Fig. 6 and 13
td(on) Turn-On Delay Time ––– 8 .1 ––– VDD = 250V
trRise Time ––– 12 ––– ID = 2.5A
td(off) Turn-Off Delay Time ––– 16 ––– RG = 21
tfFall Time ––– 13 ––– RD = 97,See Fig. 10
Ciss Input Capacitance ––– 340 ––– VGS = 0V
Coss Output Capacitance ––– 53 ––– VDS = 25V
Crss Reverse Transfer Capacitance ––– 2 .7 ––– pF ƒ = 1.0MHz, See Fig. 5
Coss Output Capacitance ––– 490 ––– VGS = 0V, V DS = 1.0V, ƒ = 1.0MHz
Coss Output Capacitance ––– 15 ––– VGS = 0V, VDS = 400V, ƒ = 1.0MHz
Coss eff. Effective Output Capacitance ––– 28 ––– VGS = 0V, VDS = 0V to 400V
Dynamic @ TJ = 25°C (unless otherwise specified)
ns
S
D
G
Parameter Min. Typ. Max. Units Conditions
ISContinuous Source Current MOSFET symbol
(Body Diode) ––– ––– showing the
ISM Pulsed Source Current integral reverse
(Body Diode) ––– ––– p-n junction diode.
VSD Diode Forward Voltage ––– ––– 1.6 V TJ = 25°C, IS = 2.5A, VGS = 0V
trr Reverse Recovery Time ––– 330 500 n s T J = 25°C, IF = 2.5A
Qrr Reverse RecoveryCharge ––– 760 1140 nC di/dt = 100A/µs
ton Forward Turn-On Time Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
Diode Characteristics
3.3
10
A
Static @ TJ = 25°C (unless otherwise specified)
Parameter Min. Typ. Max. Units Conditions
V(BR)DSS Drain-to-Source Breakdown Voltage 50 0 ––– –– V VGS = 0V, ID = 250µA
V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient ––– 0.60 ––– V/°C Reference to 25°C, I D = 1mA
RDS(on) Static Drain-to-Source On-Resistance ––– ––– 3.0 VGS = 10V, ID = 1.5A
VGS(th) Gate Threshold Voltage 2.0 ––– 4. 5 V VDS = VGS, ID = 250µA
––– ––– 25 µA VDS = 500V, VGS = 0V
––– ––– 250 VDS = 400V, VGS = 0V, TJ = 125°C
Gate-to-Source Forward Leakage ––– ––– 100 VGS = 30V
Gate-to-Source Reverse Leakage ––– ––– -100 nA VGS = -30V
IGSS
IDSS Drain-to-Source Leakage Current
Repetitive rating; pulse width limited by
max. junction temperature. ( See fig. 11 )
ISD 2.5A, di/dt 270A/µs, VDD V(BR)DSS,
TJ 150°C
Notes:
Starting TJ = 25°C, L = 45mH
RG = 25, IAS = 2.5A. (See Figure 12)
Pulse width 300µs; duty cycle 2%.
Coss eff. is a fixed capacitance that gives the same charging time
as Coss while VDS is rising from 0 to 80% VDSS
Document Number: 91274
www.vishay.com
2
IRFR/U420APbF
Fig 4. Normalized On-Resistance
Vs. Temperature
Fig 2. Typical Output CharacteristicsFig 1. Typical Output Characteristics
Fig 3. Typical Transfer Characteristics
0.01
0.1
1
10
0.1 1 10 100
20µs PULSE WIDTH
T = 25 C
J°
TOP
BOTTOM
VGS
15V
10V
8.0V
7.0V
6.0V
5.5V
5.0V
4.5V
V , Drain-to-Source Voltage (V)
I , Drain-to-Source Current (A)
DS
D
4.5V
0.1
1
10
1 10 100
20µs PULSE WIDTH
T = 150 C
J°
TOP
BOTTOM
VGS
15V
10V
8.0V
7.0V
6.0V
5.5V
5.0V
4.5V
V , Drain-to-Source Voltage (V)
I , Drain-to-Source Current (A)
DS
D
4.5V
0.01
0.1
1
10
4.0 5.0 6.0 7.0 8.0 9.0
V = 50V
20µs PULSE WIDTH
DS
V , Gate-to-Source Voltage (V)
I , Drain-to-Source Current (A)
GS
D
T = 25 C
J°
T = 150 C
J°
-60 -40 -20 020 40 60 80 100 120 140 160
0.0
0.5
1.0
1.5
2.0
2.5
3.0
T , Junction Temperature ( C)
R , Drain-to-Source On Resistance
(Normalized)
J
DS(on)
°
V =
I =
GS
D
10V
2.5A
Document Number: 91274
www.vishay.com
3
IRFR/U420APbF
Fig 8. Maximum Safe Operating Area
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
Fig 7. Typical Source-Drain Diode
Forward Voltage
0.1
1
10
0.4 0.6 0.8 1.0 1.2
V ,Source-to-Drain Voltage (V)
I , Reverse Drain Current (A)
SD
SD
V = 0 V
GS
T = 25 C
J°
T = 150 C
J°
0.1
1
10
100
10 100 1000 1000
0
OPERATION IN THIS AREA LIMI TED
BY RDS(on)
Single Pulse
T
T = 150 C
= 25 C
°°
J
C
V , Drain-to-Source Voltage (V)
I , Drain Current (A)I , Drain Current (A)
DS
D
10us
100us
1ms
10ms
0 4 8 12 16
0
5
10
15
20
Q , Total Gate Charge (nC)
V , Gate-to-Source Voltage (V)
G
GS
FOR TEST CIRCUIT
SEE FIGURE
I =
D
13
2.5A
V = 100V
DS
V = 250V
DS
V = 400V
DS
110 100 1000
VDS, Dr ain-t o-Sour ce Vol tage (V )
1
10
100
1000
10000
C, Capacitance(pF)
Coss
Crss
Ciss
VGS = 0V, f = 1 MHZ
Ciss = C
gs + Cgd, C
ds SHORTED
Crss
= C
gd
Coss
= C
ds + Cgd
Document Number: 91274
www.vishay.com
4
IRFR/U420APbF
Fig 10a. Switching Time Test Circuit
V
DS
9
0%
1
0%
V
GS t
d(on)
t
r
t
d(off)
t
f
Fig 10b. Switching Time Waveforms
VDS
Pulse Width ≤ 1 µs
Duty Factor 0.1 %
RD
VGS
RG
D.U.T.
10V
+
-
VDD
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
Fig 9. Maximum Drain Current Vs.
Case Temperature
25 50 75 100 125 150
0.0
1.0
2.0
3.0
4.0
5.0
T , Case Temperature ( C)
I , Drain Curr ent (A)
°
C
D
0.01
0.1
1
10
0.00001 0.0001 0.001 0.01 0.1 1
Notes:
1. Duty factor D = t / t
2. Peak T = P x Z + T
1 2
JDM thJC C
P
t
t
DM
1
2
t , Rectangular Pulse Duration (sec)
Therm al Res pons e (Z )
1
thJC
0.01
0.02
0.05
0.10
0.20
D = 0.50
SING LE PULSE
(THERMAL RESPON SE)
Document Number: 91274
www.vishay.com
5
IRFR/U420APbF
QG
QGS QGD
V
G
Charge
D.U.T. V
D
S
I
D
I
G
3mA
V
GS
.3µF
50K
.2µF
12V
Current Regulator
Same Type as D.U.T.
Current Sampling Resistors
+
-
10 V
Fig 13b. Gate Charge Test Circuit
Fig 13a. Basic Gate Charge Waveform
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
Fig 12b. Unclamped Inductive Waveforms
Fig 12a. Unclamped Inductive Test Circuit
tp
V
(BR)DSS
AS
R
G
I
AS
0.01
t
p
D.U.T
L
VDS
+
-V
DD
DRIVER
A
15V
20V
25 50 75 100 125 150
0
50
100
150
200
250
300
Starting T , Juncti on Tempe r ature ( C)
E , Single Pulse Avalanche Energy (m J)
J
AS
°
ID
TOP
BOTTOM
1.1A
1.6A
2.5A
Fig 12d. Typical Drain-to-Source Voltage
Vs. Avalanche Current
0.0 0.5 1.0 1.5 2.0 2.5
IAV , Av alanc he Cur r ent ( A)
550
600
650
700
V DSav , Avalanche Voltage ( V )
Document Number: 91274
www.vishay.com
6
IRFR/U420APbF
P.W. Period
di/dt
Diode Recovery
dv/dt
Ripple 5%
Body Diode Forward Drop
R
e-Applied
V
oltage
Reverse
Recovery
Current Body Diode Forward
Current
V
GS
=10V
V
DD
I
SD
Driver Gate Drive
D.U.T. I
SD
Waveform
D.U.T. V
DS
Waveform
Inductor Curent
D = P.W.
Period
+
-
+
+
+
-
-
-
Fig 14. For N-Channel HEXFET® Power MOSFETs
* VGS = 5V for Logic Level Devices
Peak Diode Recovery dv/dt Test Circuit
RG
VDD
dv/dt controlled by RG
Driver same type as D.U.T.
ISD controlled by Duty Factor "D"
D.U.T. - Device Under Test
D.U.T Circuit Layout Considerations
Low Stray Inductance
Ground Plane
Low Leakage Inductance
Current Transformer
*
Document Number: 91274
www.vishay.com
7
IRFR/U420APbF
D-Pak (TO-252AA) Part Marking Information
D-Pak (TO-252AA) Package Outline
Dimensions are shown in millimeters (inches)
12
IN THE ASSEMBLY LINE "A"
ASSEMBLED ON WW 16, 1999
EXAMPLE: WITH ASSEMBLY
THIS IS AN IRFR120
LOT CODE 1234 YEAR 9 = 199
9
DATE CODE
WEEK 16
PART NUMBER
LOGO
INTERNATIONAL
RECTIFIER
AS S EMBL Y
LOT CODE
916A
IRFU120
34
YEAR 9 = 1999
DATE CODE
OR
P = DESIGNATES LEAD-FREE
PRODUCT (OPTIONAL)
Note: "P" in assembly line position
indicates "Lead-Free"
12 34
WE E K 16
A = ASSEMBLY SITE CODE
PART NUMBER
IRFU120
LINE A
LOGO
LOT COD E
ASSEMBLY
INTERNATIONAL
RECTIFIER
Document Number: 91274
www.vishay.com
8
IRFR/U420APbF
I-Pak (TO-251AA) Package Outline
Dimensions are shown in millimeters (inches)
I-Pak (TO-251AA) Part Marking Information
AS S EMBL Y
EXAMPLE: WITH AS SEMBLY
THIS IS AN IRFU120
YEAR 9 = 199
9
DATE CO DE
LINE A
WEEK 19
IN THE ASSEMBLY LINE "A"
ASSEMBLED ON WW 19, 1999
LOT CODE 5678
PART NUM BER
56
IRFU120
INTERNATIONAL
LOGO
RECTIFIER
LOT CODE
919A
78
Note: "P" in assembly line
position indica tes "L ead-F ree"
OR
56 78
AS S E MB LY
LOT CODE
RECTIFIER
LOGO
INTERNATIONAL
IRFU120
PART NUMB ER
WEEK 19
DATE CODE
YEA R 9 = 1999
A = AS S EMBL Y S IT E CODE
P = D E S IGNAT ES L EAD-FRE E
PRODUCT (OPTIONAL)
Document Number: 91274
www.vishay.com
9
IRFR/U420APbF
Data and specifications subject to change without notice.
This product has been designed and qualified for the Industrial market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
12/04
D-Pak (TO-252AA) Tape & Reel Information
Dimensions are shown in millimeters (inches)
TR
16.3 ( .641 )
15.7 ( .619 )
8.1 ( .318 )
7.9 ( .312 )
12.1 ( .476 )
11.9 ( .469 ) FEED DIRECTION FEED DIRECTION
16.3 ( .641
)
15.7 ( .619
)
TRR
TRL
N
OTES :
1
. CONTRO LLING DIM ENSION : MILLIMETER.
2
. ALL DIMENSIONS ARE SHO WN IN MILLIMET ERS ( IN CHE S ).
3
. OUTLI NE CONFORMS TO EI A-481 & EIA-541.
NOTES :
1. OUTLINE CONFORMS TO EI A -481.
16 mm
13 INCH
Document Number: 91274
www.vishay.com
10
Legal Disclaimer Notice
Vishay
Document Number: 99901 www.vishay.com
Revision: 12-Mar-07 1
Notice
The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of
International Rectifier’s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the
products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below.
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or
anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
International Rectifier®, IR®, the IR logo, HEXFET®, HEXSense®, HEXDIP®, DOL®, INTERO®, and POWIRTRAIN®
are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product
names noted herein may be trademarks of their respective owners.