2016-01-04 1
2016-0 1-04
Silicon NPN Phototransistor
Version 1.3
SFH 300
Ordering Information
Features:
•Spectral range of sensitivity: (typ) 450 ... 1100 nm
•Package: 5mm Radial (T 1 ¾), Epoxy
•Special: High linearity
•Available in groups
Applications
•Photointerrupters
•Industrial electronics
•For control and drive circuits
•Computer-controlled flashes
Type: Photocurrent Ordering Code
IPCE [µA]
λ = 950 nm, Ee = 0.5 mW/cm2,
VCE = 5 V
SFH 300 ≥ 630 Q62702P1189
SFH 300-3/4 ≥ 1000 Q62702P3586
Note: Only one bin within one packing unit (variation less than 2:1)
2016-01-04 2
Version 1.3 SFH 300
Maximum Ratings (TA = 25 °C)
Characteristics (TA = 25 °C)
Parameter Symbol Values Unit
Operating and storage temperature range Top; Tstg -40 ... 100 °C
Collector-emitter voltage VCE 35 V
Collector current IC50 mA
Collector surge current
(τ < 10 µs)
ICS 100 mA
Emitter-collector voltage VEC 7 V
Total Power dissipation Ptot 200 mW
Thermal resistance RthJA 375 K / W
ESD withstand voltage
(acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM)
VESD 2000 V
Parameter Symbol Values Unit
Wavelength of max. sensitivity (typ) λS max 880 nm
Spectral range of sensitivity (typ) λ10% (typ) 450
... 1100
nm
Radiant sensitive area (typ) A 0.11 mm2
Dimensions of chip area (typ) L x W (typ) 0.55 x
0.55
mm x
mm
Half angle (typ) ϕ ± 25 °
Capacitance
(VCE = 0 V, f = 1 MHz, E = 0)
(typ) CCE 7.5 pF
Dark current
(VCE = 20 V, E = 0)
(typ (max)) ICE0 1 (≤ 50) nA
Rise and fall time
(IC = 1 mA, VCC = 5 V, RL = 1 kΩ)
(typ) tr, tf10 µs
Version 1.3 SFH 300
2016-01-04 3
Grouping (TA = 25 °C, λ = 950 nm)
Group Min Photocurrent Max Photocurrent Typ Photocurrent Rise and fall time
Ee = 0.5 mW/cm2,
VCE = 5 V
Ee = 0.5 mW/cm2,
VCE = 5 V
SFH 300:
EV = 1000 lx, Std.
Light A, VCE = 5 V
IC = 1 mA, VCC = 5
V, RL = 1 kΩ
IPCE, min [µA] IPCE, max [µA] IPCE [µA] tr, tf [µs]
-2 630 1250 3000 7.5
-3 1000 2000 4800 10
-4 1600 7700 10
Group Collector-emitter saturation voltage
IC = IPCEmin x 0.3, Ee = 0.5 mW/cm2
VCEsat [mV]
-2 130
-3 140
-4 150
Note.: IPCEmin is the min. photocurrent of the specified group.
Relative Spectral Sensitivity 1) page 8
Srel = f(λ)
Photocurrent 1) page 8
IPCE = f(Ee),
V
CE = 5 V
400
0nm
%
OHF04042
20
40
60
80
100
λ
rel
S
10
30
50
70
500 600 700 800 900 1100
2016-01-04 4
Version 1.3 SFH 300
Photocurrent 1) page 8
IPCE / IPCE(25°C) = f(TA), VCE = 5 V
Dark Current 1) page 8
ICEO = f(VCE), E = 0
Dark Current 1) page 8
ICEO = f(TA), E = 0
Collector-Emitter Capacitance 1) page 8
CCE = f(VCE), f = 1 MHz, E = 0
OHF04049
V
CE
0
10
101
10-1
10-2
CEO
I
nA
0 V5 10 15 20 25 30 35
nA
OHF04050
CEO
I
A
T
-2
10
-1
10
100
1
10
102
3
10
104
-25 0 25 50 75 100˚C
0
pF
OHF04051
CE
C
CE
V
10-3 10-2 10-1 100101102
V
1
2
3
4
5
6
7
8
Version 1.3 SFH 300
2016-01-04 5
Directional Characteristics 1) page 8
Srel = f(ϕ)
Package Outline
Dimensions in mm (inch).
Package
5mm Radial (T 1 ¾), Epoxy
0.6 (0.024)
0.4 (0.016)
5.9 (0.232)
5.5 (0.217)
4.5 (0.177)
4.2 (0.165)
7.8 (0.307)
7.5 (0.295)
9.0 (0.354)
8.2 (0.323)
25.2 (0.992)
24.2 (0.953)
1.8 (0.071)
1.2 (0.047)
2.54 (0.100)
spacing
0.6 (0.024)
0.4 (0.016)
1.0 (0.039)
0.7 (0.028)
ø5.1 (0.201)
Chip position
Area not flat
Emitter
GEOY6652
1.3 (0.051)
1.0 (0.039)
11.6 (0.457)
11.2 (0.441)
Collector
2016-01-04 6
Version 1.3 SFH 300
Approximate Weight:
0.3 g
Note
Packing information is available on the internet (online product catalog).
Recommended Solder Pad
Dimensions in mm.
Version 1.3 SFH 300
2016-01-04 7
TTW Soldering
IEC-61760-1 TTW
Disclaimer
Language english will prevail in case of any discrepancies or deviations between the two language wordings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any
costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components* may only be used in life-support devices** or systems with the express written approval of
OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be
expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that
device or system.
**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or
maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be
endangered.
0
0s
OHA04645
50
100
150
200
250
300
t
T
˚C
235 ˚C - 260 ˚C
First wave
20 40 60 80 100 120 140 160 180 200 220 240
Second wave
10 s max., max. contact time 5 s per wave
Preheating
T
∆
100 ˚C
120 ˚C
130 ˚C
Typical
Cooling
ca. 3.5 K/s typical
ca. 2 K/s
ca. 5 K/s
Continuous line: typical process
Dotted line: process limits
< 150 K
2016-01-04 8
Version 1.3 SFH 300
Glossary
1) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or
calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily
correspond to the actual parameters of each single product, which could differ from the typical data and calculated
correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data
will be changed without any further notice.
2016-01-04 9
Version 1.3 SFH 300
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.
