0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One(R) HS* by THine Apr.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. =^\]heZZYhZg^Va^ciZg[VXZ iZX]cdad\n[dge^XijgZigVchb^hh^dc Features 1. Accepts impedance matched shielded FFC The FH41 Series is equipped with a ground terminal and can be used with impedance matched shielded FFC. Dimensions: 68 positions 2.5mm 2. Impedance matched terminal design 38mm The signal terminal is designed for impedance control and is capable of handling high speed transmissions. 3. Highly reliable and secure structure The design of the FH41 series follows in the footsteps of another popular Hirose connector, the FH28 series. The FFC positioning mechanism and rugged structure combine to prevent accidental unlocking and produce a secure connection. 6.2mm (Mounting area) Fig.1 4. Simplified operations with a flip lock system The flip lock design allows a smoother simpler FFC operation. It requires less force to rotate the actuator and delivers a tactile click to reinforce that the lock has secured the connection. Sig 0.5 nal co mm nta pitc cts h 5. Suitable for automatic pick-n-place mounting Offered in tape and reel packaging that is compatible with automatic machine mounting. (2,500 pcs/reel) 6. Halogen free All materials and substances used to produce this product comply with Halogen-free standards. *Standards by IEC 61249-2-21. Br : 900 ppm or lower, Cl : 900 ppm or lower, Br+Cl: 1,500 ppm or lower Gr 2.5 ound mm co pitc ntac h ts Fig.2 Uses the same FFC that the FH48 Series (vertical connection) uses. Shielded FFC Signal connection area FH41 and FH48 use the same FFC layout. FFC Ground contact connection area Fig.3 In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 2019.4 1 FH41 Series0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions Product Specifications Operating temperature range: -40 to +105c (Note 2) Operating humidity range: Relative humidity of 90% or lower (no dew condensation) Rated current 0.5A (Note 1) Rated voltage AC 50Vrms Rating Storage temperature range: -10 to +50c (Note 3) Storage humidity range: Relative humidity of 90% or lower (no dew condensation) Applicable FPC and FFC t= 0.3 0.05, gold plating (GND plate: t= 0.5 0.05, tin plating) terminal specifications Items Specifications Conditions 1. Insulation resistance Minimum of 500Mo Measured at DC 100V. 2. Withstanding voltage No flashover or insulation damage AC 150Vrms for 1 minute 3. Contact resistance Measured at 1mA. Maximum of 100mo *Incl. FFC conductor resistance Apr.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. 4. Repeated motions Contact resistance: Maximum of 100mo Durability No damaged, cracked or loose parts. 20 mating cycles 5. Vibration resistance No electrical discontinuity for more than 1s Frequency 10 to 55Hz with half amplitude 0.75mm in 3 Contactresistance : Maximum of 100mo directions, 10 cycles each. No damaged, cracked or loose parts. 6. Impact resistance No electrical discontinuity for more than 1s Acceleration : 981m/s2, duration time : 6ms, with half sine Contact resistance : Maximum of 100mo waves in 3 directions, three times each. No damaged, cracked or loose parts. Contact resistance : Maximum of 100mo 7. Humidity resistance Insulation resistance : Minimum of 50Mo in ordinary conditions No damaged, cracked or loose parts. Left for 96 hours at temperature 40c, humidity 90 to 95% 8. Temperature cycle Contact resistance : Maximum of 100mo Insulation resistance : Minimum of 50Mo No damaged, cracked or loose parts. Temperature : -40c +15c to +35c +105c +15c to +35c Time : 30 2 to 3 30 2 to 3 min. 5 cycles in the above conditions 9. Solder heat resistance No deformation of components or no significant looseness of contacts, etc. Reflow : Recommended temperature profile Manual soldering : 350 5c for 5 sec. Note 1 : When energizing rated current to all contacts, use 70% of rated current. Note 2 : Includes temperature rise caused by current flow. Note 3 : The term "storage" here refers to products stored for a long period prior to board mounting and use. The operating temperature and humidity range covers the non-energized condition of connectors after board mounting and the temporary storage. Materials / Finish Parts Materials Insulating parts Color/Finish Gray LCP Terminal Black Phosphor bronze (plating material) Pure tin reflow plating Product number structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. FH 41 - 50S - 0.5 SH (05) q w e qSeries name : FH wSeries number : 41 eNumber of contacts : 15 to 68 rContact pitch : 0.5mm 2 r t UL94V-0 Gold plating Phosphor bronze Metal parts Remarks y tTerminal shape SH...SMT horizontal implementation type yPlating specifications : (05)...Gold plating (Except 50, 68 contacts) (28)...Gold plating (50, 68 contacts) ------ FH41 Series0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions Connector dimension drawing C D (5.05) (5.45) (0.12) 0.5 No. of contacts (0.12) 2.5 Cavity No. (4.7) (G-1)x2.5 (=E) (0.15) 2 2.5 Apr.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. 1 0.8 0.25 (F: FFC insert opening dimension) H 6.2 Note 1 : The coplanarity of the metal fittings and the contacts are a maximum of 0.1mm. Note 2 : Packaged on tape and reel only. Check packaging specification. Note 3 : Recesses may be added to the part structure to improve the molding characteristics. Black marks may appear in the mold resin, but they will not negatively affect the performance of these connectors. Note 4 : The color of the plating may change after the reflow process, but it will not negatively affect the performance of these connectors. Connector dimension table Part No. FH41-15S-0.5SH(05) FH41-20S-0.5SH(05) FH41-28S-0.5SH(05) FH41-30S-0.5SH(05) FH41-31S-0.5SH(05) FH41-40S-0.5SH(05) FH41-50S-0.5SH(28) FH41-60S-0.5SH(05) FH41-68S-0.5SH(28) HRS No. 580-2222-2 05 580-2221-0 05 580-2208-1 05 580-2218-5 05 580-2216-0 05 580-2205-3 05 580-2204-0 28 580-2223-0 05 580-2202-5 28 No. of contacts Number of ground contacts : G 15 3 20 4 28 5 30 6 31 6 40 8 50 10 60 12 68 13 Unit : mm C 11.5 14 18 19 19.5 24 29 34 38 D 7 9.5 13.5 14.5 15 19.5 24.5 29.5 33.5 E 5 7.5 10 12.5 12.5 17.5 22.5 27.5 30 F 8.07 10.57 14.57 15.57 16.07 20.57 25.57 30.57 34.57 H 9.45 11.95 15.95 16.95 17.45 21.95 26.95 31.95 35.95 Note 1 : This embossed packaged product is sold by full reel quantities of 2,500 pcs/reel. Please place orders in full reel quantities. 3 FH41 Series0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions BRecommended PCB layout and metal mask dimension diagram 1.20.05(Land pattern) 10.05(Metal mask) 1.550.05 Apr.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. 0.30.03(Land pattern) 0.250.03(Metal mask) 0.50.05 10.05 6.350.05 0.650.05 6.60.1 D0.05 0.30.03(Land pattern) 0.20.03(Metal mask) 2.50.05 0.40.03 (G-1)x2.5 (=E)0.05 J0.05 Recommended metal mask thickness : t= 0.1 BRecommended FFC dimension drawing 0.5 0.1 0.3 0.03 5.5 MIN 0.1 0.5 0.05(Ground plate thickness) 0.3 0.05(End conductor thickness) 0.1 MIN 17.7 MAX 5.5 MIN 2.6 0.5 2.1 0.5 0.5 0.05 1.9 0.1 2.6 0.1 3.8 0.1 0.5 0.1 R0 .2 20 R0 .1 .2 2- K 0.1 L 0.07 D 0.05 Ground plate X .2 MA Shielded area 2-R 0 2-R 0. 2 MA X 1 Note : 1 Please overlap shield plate on ground plate BRecommended land, metal mask and FFC dimension table Part No. FH41-15S-0.5SH(05) FH41-20S-0.5SH(05) FH41-28S-0.5SH(05) FH41-30S-0.5SH(05) FH41-31S-0.5SH(05) FH41-40S-0.5SH(05) FH41-50S-0.5SH(28) FH41-60S-0.5SH(05) FH41-68S-0.5SH(28) 4 HRS No. 580-2222-2 05 580-2221-0 05 580-2208-1 05 580-2218-5 05 580-2216-0 05 580-2205-3 05 580-2204-0 28 580-2223-0 05 580-2202-5 28 No. of contacts 15 20 28 30 31 40 50 60 68 Number of ground contacts : G 3 4 5 6 6 8 10 12 13 J 9.5 12 16 17 17.5 22 27 32 36 K 9.2 11.7 15.7 16.7 17.2 21.7 26.7 31.7 35.7 Unit : mm L 8 10.5 14.5 15.5 16 20.5 25.5 30.5 34.5 FH41 Series0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions BPackaging Specifications Embossed carrier tape dimension CL P0.1 M0.3 0 .1 1.750.1 Q0.1 O1 .5 +0 1.750.1 (R) (S) (T) (1.64 : Vacuum pick up surface for automatic mounting) (5.75) Unreeling direction (7.35) CL Unreeling direction Reel dimensions (O80) (O380) (U : Outer width) (V : Inner width) 3) (O1 Apr.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. 40.1 20.1 120.1 (1.64 : Vacuum pick up surface for automatic mounting) (5.75) (7.35) (2.9) (0.3) M0.3 Q0.1 20.1 120.1 O1 .5 +0 40.1 (R) (S) (T) (2.9) (0.3) (Tape width: Minimum of 32mm) 0 .1 (Tape width: Maximum of 24mm) Terminal section Loaded product section Empty pockets (At least 14 empty pockets) Leader section (Minimum of 400 mm) Empty pockets Cover tape (Minimum of 10 empty pockets) Embossed carrier tape containing product BPackaging Specification Dimensions Part No. FH41-15S-0.5SH(05) FH41-20S-0.5SH(05) FH41-28S-0.5SH(05) FH41-30S-0.5SH(05) FH41-31S-0.5SH(05) FH41-40S-0.5SH(05) FH41-50S-0.5SH(28) FH41-60S-0.5SH(05) FH41-68S-0.5SH(28) HRS No. 580-2222-2 05 580-2221-0 05 580-2208-1 05 580-2218-5 05 580-2216-0 05 580-2205-3 05 580-2204-0 28 580-2223-0 05 580-2202-5 28 No. of contacts Number of ground contacts : G 15 3 20 4 28 5 30 6 31 6 40 8 50 10 60 12 68 13 Unit : mm M 24 P - Q 11.5 32 28.4 14.2 44 40.4 20.2 56 52.4 26.2 R 11.8 14.3 18.3 19.3 19.8 24.3 29.3 34.3 38.3 S 10.5 13.5 17 18 18.5 23 28 33 37 T 9.2 12.2 15.7 16.7 17.2 21.7 26.7 31.7 35.7 U V 29.4 25.4 37.4 33.4 49.4 45.4 61.4 57.4 5 FH41 Series0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions BFH41 Series FFC materials configuration (recommended specifications) BViZg^VacVbZ BViZg^Vah IdiVaI]^XcZhhVi IdiVaI]^XcZhhVi <gdjcYEaViZb :cY8dcYjXidgb H]^ZaY^c\BViZg^Va H]^ZaYZYVgZV 8dcYjXi^kZ6Y]Zh^kZ EdanZhiZgIneZ ,% 8deeZg;d^aI^ceaVi^c\ <gdjcYeaViZ 6Y]Zh^kZ 6Xgna^XIneZ ') 7VhZ;^ab EdanZhiZgIneZ &' 6Y]Zh^kZ 6Xgna^XIneZ ') >chjaVi^dcAVnZg EdanZhiZgIneZ '* 6Y]Zh^kZ EdanZhiZgIneZ (* H]^ZaYZYVgZV (* (* 6Y]Zh^kZ EdanZhiZgIneZ (* (* >chjaVi^dcAVnZg EdanZhiZgIneZ '* '* 6Y]Zh^kZ EdanZhiZgIneZ (% (% Hi^[[ZcZg EdanZhiZgIneZ &-- &-- *%( (&( IdiVa 8dciVXijhl^i]^cfj^g^Zhdc]dlidX]Vc\Zi]ZheZX^[^XVi^dchVcYi]^XcZhhXdc[^\jgVi^dch# BRecommended Soldering Profile B6M'*% '*% '(% '%% IZbeZgVijgZ Apr.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. Hd[i8deeZg;d^aC^XZaJcYZg EaVi^c\ <daYEaVi^c\ '%% &*% &*% &%% *% '* % +%hZX# .%"&'%hZX# EgZ"]ZVii^bZ HiVgi I^bZhZX# 6 +%hZX# HdaYZg^c\i^bZ Application conditions Reflow type : Reflow with far-infrared ray and hot air combined Reflow furnace atmosphere: Air Solder : Cream type Sn/3.0 Ag/0.5 Cu (Senju Metal Industry, M705-221CM5-42-10.5) Test board : Board material and size Glass epoxy 30600.8mm Land dimension 0.30.65, 0.31.2mm Metal mask : Thickness 0.1mm Opening dimensions 0.250.65, 0.21mm This temperature profile shall be used under the above application conditions. This temperature profile is based on the conditions provided above. Please check the mounting conditions before use, conditions such as solder paste types, manufacturer, PCB size and any other soldering materials may alter the performance of such materials. FH41 Series0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions BConnector handling and precautions Connector handling 1. Insertion of FFC qRotate the actuator upward to unlock it. The actuator can be easily operated with the use of a thumb nail or index finger. Precautions for use qThe FH41 series actuator was designed to open up to a maximum angle of 110, forcing the actuator past this point will damage or detach it. Do not apply excessive force when rotating the actuator. Apr.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. 110 wInsert the FFC into the connector with the conductive traces facing down. The FFC should be inserted at a slight oblique angle relative to the mounting surface, for more directions please refer to the next page. wInsert the FFC correctly into the opening, failing to do so can lead to disconnection or conduction failure. Positioning point eRotate the actuator down until it is firmly closed. eThe connector's design is not resistant against upward pulling forces. The FFC should be fixed so that the pull force is not transmitted to the connector. 2. FFC removal qRotate the actuator upwards to release the lock, then lift up the FFC and remove it from the connector. rBe careful not to scrape the FFC on the housing of the connector during insertion, this action can lead to damaged contacts, terminal deformation, FFC conductor defects and other failures. 7 FH41 Series0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions BPrecautions for inserting and mating FFC with positioning tabs Handling Precautions for use 1. Insertion position Insert the cable so that the positioning tabs lay in the gap, , between the mold wall which is indicated by the two on the both sides of the cable insert opening indicated by and the guide wall that is on the inside of the . connector indicated by wFFC must not over lap Do not close the actuator until the FFC has been placed into its correct position. If it is sitting on the guides and the actuator closes onto it, it can cause damage and alter its performance. Cable over lapping on the left guide. Apr.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. Cable over lapping on the right guide. Correct insertion 2. Precautions for insertion and mating qDo not insert the cable diagonally, the corners of the cable might get hooked on the connector which can damage the contacts. Do not close the actuator if the cable is not in its correct position or if it is still on top of the guides. Insertion from a skewed direction Recommended mating qInsert the cable straight into the opening at a slight angle to ensure a complete connection. wRotate the actuator down to close the actuator. (R) 8 If the lock is closed with the cable running over the guide, do not move the cable. In this case, open the actuator first and re-insert the cable to the position explained in "1. Insertion position." In the event that the lock is closed and the cable was not in its correct position, do not try to move the cable. Release the lock immediately and open the actuator back up, remove and re-position the cable as explained previously in "1. Insertion position." Prevent the actuator from closing and moving in various directions with the cable running over the guide. If the cable is misplaced and the actuator is closed, do not move the cables back and forth after the actuator has been locked. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 04/2019. Contents are subject to change without notice for the purpose of improvements.