1825HC132ZAZ9A - AVX Corporation

Notes: Capacitors with X7R dielectrics are not intended for applications across AC supply mains or AC line filtering with polarity reversal. Contact plant for recommendations.

Contact factory for availability of Termination and Tolerance options for Specific Part Numbers.

*** AVX offers nonstandard chip sizes. Contact factory for details.

High Voltage MLC Chips FLEXITERM®

For 600V to 3000V Applications

HOW TO ORDER

SIZE 0805 1206 1210* 1808* 1812* 1825* 2220* 2225*

(L) Length 2.01 ± 0.20 3.20 ± 0.20 3.20 ± 0.20 4.57 ± 0.25 4.50 ± 0.30 4.50 ± 0.30 5.7 ± 0.40 5.72 ± 0.25

(0.079 ± 0.008) (0.126 ± 0.008) (0.126 ± 0.008) (0.180 ± 0.010) (0.177 ± 0.012) (0.177 ± 0.012) (0.224 ± 0.016) (0.225 ± 0.010)

(W) Width 1.25 ± 0.20 1.60 ± 0.20 2.50 ± 0.20 2.03 ± 0.25 3.20 ± 0.20 6.40 ± 0.30 5.0 ± 0.40 6.35 ± 0.25

(0.049 ± 0.008) (0.063 ± 0.008) (0.098 ± 0.008) (0.080 ± 0.010) (0.126 ± 0.008) (0.252 ± 0.012) (0.197 ± 0.016) (0.250 ± 0.010)

(T) Thickness 1.30 1.52 1.70 2.03 2.54 2.54 3.30 2.54

Max. (0.051) (0.060) (0.067) (0.080) (0.100) (0.100) (0.130) (0.100)

(t) terminal min. 0.50 ± 0.25 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010)

max. (0.020 ± 0.010) 0.75 (0.030) 0.75 (0.030) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040)

High value, low leakage and small size are difficult parameters to obtain

in capacitors for high voltage systems. AVX special high voltage MLC

chips capacitors meet these performance characteristics and are

designed for applications such as snubbers in high frequency power

converters, resonators in SMPS, and high voltage coupling/DC blocking.

These high voltage chip designs exhibit low ESRs at high frequencies.

To make high voltage chips, larger physical sizes than are normally

encountered are necessary. These larger sizes require that special pre-

cautions be taken in applying these chips in surface mount assemblies.

In response to this, and to follow from the success of the FLEXITERM®

range of low voltage parts, AVX is delighted to offer a FLEXITERM®high

voltage range of capacitors, FLEXITERM®.

The FLEXITERM®layer is designed to enhance the mechanical flexure

and temperature cycling performance of a standard ceramic capacitor,

giving customers a solution where board flexure or temperature cycle

damage are concerns.

*Reflow Soldering Only

1808

AVX

Style

0805

1206

1210

1808

1812

1825

2220

2225

***

Voltage

600V/630V = C

1000V = A

1500V = S

2000V = G

2500V = W

3000V = H

Temperature

Coefficient

C0G = A

X7R = C

272

Capacitance Code

(2 significant digits

+ no. of zeros)

Examples:

10 pF = 100

100 pF = 101

1,000 pF = 102

22,000 pF = 223

220,000 pF = 224

1 μF = 105

Capacitance

Tolerance

C0G: J = ±5%

K = ±10%

M = ±20%

X7R: K = ±10%

M = ±20%

Z = +80%,

-20%

Test Level

Termination*

Z = FLEXITERM®

100% Tin

(RoHS Compliant)

Packaging

1 = 7" Reel

3 = 13" Reel

9 = Bulk

Special

Code

A = Standard

DIMENSIONS millimeters (inches)

VOLTAGE 0805 1206 1210 1808 1812 1825 2220 2225

600/630 min. 10pF 10 pF 100 pF 100 pF 100 pF 1000 pF 1000 pF 1000 pF

max. 330pF 1200 pF 2700 pF 3300 pF 5600 pF 0.012 μF 0.012 μF 0.018 μF

min. 10pF 10 pF 10 pF 100 pF 100 pF 100 pF 1000 pF 1000 pF

1000 max. 180pF 560 pF 1500 pF 2200 pF 3300 pF 8200 pF 0.010 μF 0.010 μF

min. — 10 pF 10 pF 10 pF 10 pF 100 pF 100 pF 100 pF

1500 max. — 270 pF 680 pF 820 pF 1800 pF 4700 pF 4700 pF 5600 pF

min. — 10 pF 10 pF 10 pF 10 pF 100 pF 100 pF 100 pF

2000 max. — 120 pF 270 pF 330 pF 1000 pF 1800 pF 2200 pF 2700 pF

min. — — — 10 pF 10 pF 10 pF 100 pF 100 pF

2500 max. — — — 180 pF 470 pF 1200 pF 1500 pF 1800 pF

min. — — — 10 pF 10 pF 10 pF 10 pF 10 pF

3000 max. — — — 120 pF 330 pF 820 pF 1000 pF 1200 pF

min. — — — 10 pF 10 pF 10 pF 10 pF 10 pF

4000 max. — — — 47 pF 150 pF 330 pF 470 pF 560 pF

min. — — — — — — 10 pF 10 pF

5000 max. — — — — — — 220 pF 270 pF

HIGH VOLTAGE C0G CAPACITANCE VALUES

HIGH VOLTAGE X7R MAXIMUM CAPACITANCE VALUES

X7R Dielectric

Performance Characteristics

Capacitance Range 10 pF to 0.018 μF

(25°C, 1.0 ±0.2 Vrms at 1kHz, for ≤ 1000 pF use 1 MHz)

Capacitance Tolerances ±5%, ±10%, ±20%

Dissipation Factor 0.1% max. (+25°C, 1.0 ±0.2 Vrms, 1kHz, for ≤ 1000 pF use 1 MHz)

Operating Temperature Range -55°C to +125°C

Temperature Characteristic 0 ±30 ppm/°C (0 VDC)

Voltage Ratings 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 VDC (+125°C)

Insulation Resistance (+25°C, at 500 VDC) 100K MΩ min. or 1000 MΩ - μF min., whichever is less

Insulation Resistance (+125°C, at 500 VDC) 10K MΩ min. or 100 MΩ - μF min., whichever is less

Dielectric Strength Minimum 120% rated voltage for 5 seconds at 50 mA max. current

Capacitance Range 10 pF to 0.33 μF (25°C, 1.0 ±0.2 Vrms at 1kHz)

Capacitance Tolerances ±10%; ±20%; +80%, -20%

Dissipation Factor 2.5% max. (+25°C, 1.0 ±0.2 Vrms, 1kHz)

Operating Temperature Range -55°C to +125°C

Temperature Characteristic ±15% (0 VDC)

Voltage Ratings 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 VDC (+125°C)

Insulation Resistance (+25°C, at 500 VDC) 100K MΩ min. or 1000 MΩ - μF min., whichever is less

Insulation Resistance (+125°C, at 500 VDC) 10K MΩ min. or 100 MΩ - μF min., whichever is less

Dielectric Strength Minimum 120% rated voltage for 5 seconds at 50 mA max. current

High Voltage MLC Chips FLEXITERM®

For 600V to 5000V Applications

VOLTAGE 0805 1206 1210 1808 1812 1825 2220 2225

600/630 min. 100pF 1000 pF 1000 pF 1000 pF 1000 pF 0.010 μF 0.010 μF 0.010 μF

max. 6800pF 0.022 μF 0.056 μF 0.068 μF 0.120 μF 0.270 μF 0.270 μF 0.330 μF

min. 100pF 100 pF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF

1000 max. 1500pF 6800 pF 0.015 μF 0.018 μF 0.039 μF 0.100 μF 0.120 μF 0.150 μF

min. — 100 pF 100 pF 100 pF 100 pF 1000 pF 1000 pF 1000 pF

1500 max. — 2700 pF 5600 pF 6800 pF 0.015 μF 0.056 μF 0.056 μF 0.068 μF

min. — 10 pF 100 pF 100 pF 100 pF 100 pF 1000 pF 1000 pF

2000 max. — 1500 pF 3300 pF 2300 pF 8200 pF 0.022 μF 0.027 μF 0.033 μF

min. — — — 10 pF 10 pF 100 pF 100 pF 100 pF

2500 max. — — — 2200 pF 5600 pF 0.015 μF 0.018 μF 0.022 μF

min. — — — 10 pF 10 pF 100 pF 100 pF 100 pF

3000 max. — — — 1800 pF 2200 pF 0.010 pF 0.012 μF 0.015 μF

C0G Dielectric

Performance Characteristics