Part Number 855975 280 MHz SAW Filter Data Sheet Features * * * * * * * * For WLAN applications Usable bandwidth of 17 MHz Low loss High attenuation at tones Single-ended or balanced operation Ceramic Surface Mount Package (SMP) Small size Package Pin Configuration Surface Mount 5.00 x 5.00 x 1.32 mm Bottom View 1 2 3 0.66 1.32 NOM. 1.52 MAX. 4 8 5.00 1.27 7 5.00 1.27 2.08 Pin No. 2 3 6 7 1,4,5,8 6 5 Description Input return Input Output return Output Case ground 0.64 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.15/0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev A 07-Dec-2001 Page 1 of 5 Part Number 855975 280 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -10 to +50 oC Parameter (3) Center Frequency, f0 Insertion Loss at 280 MHz Lower 3 dB Point (4) Upper 3 dB Point Passband Ripple 271.5 - 288.5 MHz Group Delay Variation 271.5 - 288.5 MHz Stopband Rejection (4) 10 - 250 MHz 310 - 340 MHz 340 - 500 MHz Source Impedance: (5) Load Impedance: (5) Minimum Typical Maximum Unit 288.5 280 8.95 269.1 291.1 10 271.5 - MHz dB MHz MHz - 0.6 1 dB p-p - 40 100 ns 40 38 40 - 43 40 42 50 50 - dB dB dB Notes: 1. 2. 3. 4. 5. All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances Relative to insertion loss at 280 MHz This is the optimum impedance in order to achieve the performance shown Test Circuit: 12nH 15nH 3 50 Single-ended 50 7 18pF 10pF 50 1,2,4,5,6,8 Subject to change or obsolescence without notice Rev A 07-Dec-2001 Page 2 of 5 Part Number 855975 280 MHz SAW Filter Data Sheet Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev A 07-Dec-2001 Page 3 of 5 Part Number 855975 280 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 12nH 15nH 3 50 Single-ended 7 18pF 10pF 50 50 1,2,4,5,6,8 Marking PCB Footprint 5.20 2.28 Sawtek logo 1.47 Marking code J JJJYM .84 .71 .43 Date code ID dot The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code 1.47 .84 This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 2.7 12.8 ID dot O330 0.3 2.0 4.0 O1.5 A 1.75 5.5 Sawtek logo O102 O20.2 O13.0 2.0 Direction of travel 5.25 1.8 Section A-A 5.25 8.0 O1.5 12.0 A Dimensions shown are nominal in millimeters Packaging quantity: 4000 units/reel Subject to change or obsolescence without notice Rev A 07-Dec-2001 Page 4 of 5 Part Number 855975 280 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -10 -40 +50 +85 Unit o C C o Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters Other Technical Information Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Or contact one of our worldwide network of sales offices, representatives or distributors Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Rev A 07-Dec-2001 Page 5 of 5