• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
Multilayer Band Pass Filters(Balance Output Type)
For 2.4GHz W-LAN/Bluetooth
DEA Series
Type:
Issue date:
DEA202450BT-7171A1 (2.0×1.25×0.6mm max.)
DEA202450BT-7190A1 (2.0×1.25×0.6mm max.)
DEA202450BT-7099A1 (2.0×1.25×0.8mm max.)
DEA202450BT-7100C1 (2.0×1.25×0.8mm max.)
DEA202350BT-7196A1 (2.0×1.25×0.9mm)
DEA202450BT-7077A1 (2.0×1.25×0.95mm)
DEA202450BT-7089C3 (2.0×1.25×1.0mm max.)
DEA202450BT-7112B1 (2.0×1.25×1.0mm max.)
DEA202450BT-7112E1 (2.0×1.25×1.0mm max.)
December 2010
(1/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
Multilayer Chip Band Pass Filters(Balance Output Type)
For Bluetooth & 2.4GHz W-LAN
DEA Series DEA202450BT-7171A1
FEATURES
• Miniature balanced band pass filter.
• Matched to 34+j60Ω.
• Package size: 2.0×1.25mm.
• Low profile : 0.6mm max. height.
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERNS
Note 1: Pin 2 of the filter provides a DC feed connection to the balanced ports.
In the event that this function is used, pin 2 should be connected to
ground using a de-coupling capacitor.
Note 2: In the event that the pin 2 function is not used, the pin should be left
unconnected.
EVALUATION SETUP
Conformity to RoHS Directive
1.25±0.15
0.6max.
0.25±0.2
0.3±0.2
2.0±0.15
7
6
5
4
8
1
2
3
0.3±0.2
0.2±0.20.35±0.15
Dimensions in mm
0.65±0.15
Top view Bttom view
1 Unbalanced I/O
2 DC feed
3 N.C.
4 GND
5 Balanced I/O
6 GND
7 Balanced I/O
8 GND
Terminal functions
0.60
0.20
0.55 0.65
2.60
0.35
1.95
0.35
Dimensions in mm
Actual calibration plane Actual calibration plane
Test Fixture
Extended calibration plane
Note 1: The Port Extension function on the Network Analyser is used to
extend the calibration plane to the DUT terminals.
Note 2: Loss in the PCB traces is compensated for by measurement data
taken on a PCB Thru' line.
DUT
PCB
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(2/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
ELECTRICAL CHARACTERISTICS
FREQUENCY CHARACTERISTICS
SDS21 INSERTION LOSS
AMPLITUDE IMBALANCE
SSS11 VSWR
SDS21 ATTENUATION
PHASE IMBALANCE
SDD22 VSWR
SMITH CHARTS
SSS11 SDD22
Insertion Loss [2402 to 2480MHz] 3.0dB max.
Single ended port characteristic impedance — 50Ω(Nominal)
Balanced ports impedance, nominal value — 34 + j60Ω
VSWR: Unbalanced port [2402 to 2480MHz] 2max.
VSWR: Balanced port
(with respect to nominal balanced impedance) [2402 to 2480MHz] 2max.
Attenuation
[880 to 960MHz] 35dB min.
[1710 to 1880MHz] 22dB min.
[1880 to 1910MHz] 20dB min.
[2110 to 2170MHz] —
[4804 to 4960MHz] 18dB min.
Phase difference at balanced port [2402 to 2480MHz] 180±10.0°
Amplitude imbalance at balanced port [2402 to 2480MHz] 0±2dB
Temperature range Operating –40 to +85°C
Storage –40 to +85°C
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–4.0
–3.0
–3.5
–2.0
–2.5
–1.0
–1.5
–0.5
0.0
Insertion loss(dB)
1: 2.400GHz
–2.16dB
2: 2.440GHz
–2.09dB
3: 2.480GHz
–2.04dB
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
1.0
2.0
3.0
–3.0
–2.0
–1.0
0
Amplitude imbalance(dB)
1: 2.400GHz
–0.74dB
2: 2.440GHz
–0.70dB
3: 2.480GHz
–0.70dB
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
0.00
1.00
2.00
3.00
4.00
5.00
VSWR(dB)
1: 2.400GHz
1.42dB
2: 2.440GHz
1.45dB
3: 2.480GHz
1.47dB
123
–60 0.501 8
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.51.5
–40
–50
–30
–20
–10
0
Attenuatio
n(dB)
Frequency(GHz)
1: 0.030GHz
–51.01dB
2: 0.880GHz
–51.37dB
3: 0.960GHz
–51.42dB
4: 1.710GHz
–34.78dB
5: 1.910GHz
–24.31dB
6: 4.800GHz
–42.18dB
7: 4.960GHz
–38.54dB
8: 7.200GHz
–29.54dB
9: 7.440GHz
–29.57dB
123
4
5
6
7
89
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–20.00
–10.00
0
10.00
–15.00
–5.00
5.00
15.00
20.00
Phase imbalance(deg.)
1: 2.400GHz
0.8deg.
2: 2.440GHz
1.7deg.
3: 2.480GHz
2.0deg.
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
0.00
1.00
2.00
3.00
4.00
5.00
VSWR(dB)
1: 2.400GHz
1.24dB
2: 2.440GHz
1.23dB
3: 2.480GHz
1.11dB
123
(3/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
PACKAGING STYLES
REEL DIMENSIONS
TAPE DIMENSIONS
ø178±2.0
2.0±0.5
ø13±0.5
ø21±0.5
ø60±2.0
13.0±1.4
9.0±0.3
Dimensions in mm
Standard package quantities: 2000pcs/reel
8.0±0.2 3.5±0.05
1.75±0.1
4.0±0.1 4.0±0.1
2.0±0.05
Sprocket hole 1.55±0.05
0.3max.
0.75±0.05
1.55±0.1
2.25±0.1
Loading direction
Dimensions in mm
(4/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
Multilayer Chip Band Pass Filters(Balance Output Type)
For Bluetooth & 2.4GHz W-LAN
DEA Series DEA202450BT-7190A1
FEATURES
• Miniature balanced band pass filter.
• Matched to 34+j60Ω.
• Package size: 2.0×1.25mm.
• Low profile : 0.6mm max. height.
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERNS
Note 1: Pin 2 of the filter provides a DC feed connection to the balanced ports.
In the event that this function is used, pin 2 should be connected to
ground using a de-coupling capacitor.
Note 2: In the event that the pin 2 function is not used, the pin should be left
unconnected.
EVALUATION SETUP
Conformity to RoHS Directive
1.25±0.15
0.6max.
0.25±0.2
0.3±0.2
2.0±0.15
7
6
5
4
8
1
2
3
0.3±0.2
0.2±0.20.35±0.15
Dimensions in mm
0.65±0.15
Top view Bttom view
1 Unbalanced I/O
2 DC feed
3 N.C.
4 GND
5 Balanced I/O
6 GND
7 Balanced I/O
8 GND
Terminal functions
0.60
0.20
0.55 0.65
2.60
0.35
1.95
0.35
Dimensions in mm
Actual calibration plane Actual calibration plane
Test Fixture
Extended calibration plane
Note 1: The Port Extension function on the Network Analyser is used to
extend the calibration plane to the DUT terminals.
Note 2: Loss in the PCB traces is compensated for by measurement data
taken on a PCB Thru' line.
DUT
PCB
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(5/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
ELECTRICAL CHARACTERISTICS
FREQUENCY CHARACTERISTICS
SDS21 INSERTION LOSS
AMPLITUDE IMBALANCE
SSS11 VSWR
SDS21 ATTENUATION
PHASE IMBALANCE
SDD22 VSWR
SMITH CHARTS
SSS11 SDD22
Insertion Loss [2402 to 2480MHz] 3.0dB max.
Single ended port characteristic impedance — 50Ω(Nominal)
Balanced ports impedance, nominal value — 34 + j60Ω
VSWR: Unbalanced port [2402 to 2480MHz] 2max.
VSWR: Balanced port
(with respect to nominal balanced impedance) [2402 to 2480MHz] 2max.
Attenuation
[880 to 960MHz] 35dB min.
[1710 to 1880MHz] 22dB min.
[1880 to 1910MHz] 20dB min.
[2110 to 2170MHz] —
[4804 to 4960MHz] 18dB min.
Phase difference at balanced port [2402 to 2480MHz] 180±10.0°
Amplitude imbalance at balanced port [2402 to 2480MHz] 0±2dB
Temperature range Operating –40 to +85°C
Storage –40 to +85°C
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–4.0
–3.0
–3.5
–2.0
–2.5
–1.0
–1.5
–0.5
0.0
Insertion loss(dB)
1: 2.400GHz
–2.16dB
2: 2.440GHz
–2.09dB
3: 2.480GHz
–2.04dB
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
1.0
2.0
3.0
–3.0
–2.0
–1.0
0
Amplitude imbalance(dB)
1: 2.400GHz
–0.74dB
2: 2.440GHz
–0.70dB
3: 2.480GHz
–0.70dB
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
0.00
1.00
2.00
3.00
4.00
5.00
VSWR(dB)
1: 2.400GHz
1.42dB
2: 2.440GHz
1.45dB
3: 2.480GHz
1.47dB
123
–60 0.501 8
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.51.5
–40
–50
–30
–20
–10
0
Attenuatio
n(dB)
Frequency(GHz)
1: 0.030GHz
–51.01dB
2: 0.880GHz
–51.37dB
3: 0.960GHz
–51.42dB
4: 1.710GHz
–34.78dB
5: 1.910GHz
–24.31dB
6: 4.800GHz
–42.18dB
7: 4.960GHz
–38.54dB
8: 7.200GHz
–29.54dB
9: 7.440GHz
–29.57dB
123
4
5
6
7
89
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–20.00
–10.00
0
10.00
–15.00
–5.00
5.00
15.00
20.00
Phase imbalance(deg.)
1: 2.400GHz
0.8deg.
2: 2.440GHz
1.7deg.
3: 2.480GHz
2.0deg.
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
0.00
1.00
2.00
3.00
4.00
5.00
VSWR(dB)
1: 2.400GHz
1.24dB
2: 2.440GHz
1.23dB
3: 2.480GHz
1.11dB
123
(6/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
PACKAGING STYLES
REEL DIMENSIONS
TAPE DIMENSIONS
ø178±2.0
2.0±0.5
ø13±0.5
ø21±0.5 Standard package quantities: 2000pcs/reel
ø60±2.0
13.0±1.4
9.0±0.3
Dimensions in mm
8.0±0.2 3.5±0.05
1.75±0.1
4.0±0.1 4.0±0.1
2.0±0.05
Sprocket hole 1.55±0.05
0.3max.
0.75±0.05
1.55±0.1
2.25±0.1
Loading direction
Dimensions in mm
(7/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
Multilayer Chip Band Pass Filters(Balance Output Type)
For Bluetooth & 2.4GHz W-LAN
DEA Series DEA202450BT-7099A1
FEATURES
• Miniature balanced band pass filter.
• Matched to 24+j48.8Ω.
• Package size: 2.0×1.25mm.
• Low profile : 0.8mm max. height.
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERNS
• Pin 2 of the filter provides a DC feed connection to the balanced ports.
• In the event that this function is used pin 2 should be connected to ground
using a de-coupling capacitor.
Conformity to RoHS Directive
0.8max.
1.25±0.15
2.0±0.15
7
6
5
4
8
1
2
3
0.3±0.2
0.2±0.20.35±0.15
Dimensions in mm
0.65±0.15
Top view Bttom view
1 Unbalanced I/O
2 DC feed
3 N.C.
4 GND
5 Balanced I/O
6 GND
7 Balanced I/O
8 GND
Terminal functions
The identification marking in figure refer to prototype components only.
A different component mark is used for mass production.
0.60
0.20
0.55 0.65
2.60
0.35
1.95
0.35
Dimensions in mm
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(8/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
ELECTRICAL CHARACTERISTICS
FREQUENCY CHARACTERISTICS
INSERTION LOSS/ATTENUATION
RETURN LOSS(Balance)
PHASE DIFFERENCE
RETURN LOSS(Unbalance)
AMPLITUDE IMBALANCE
COMMON MODE
Insertion Loss [2402 to 2480MHz] 2.3dB typ.
Single ended port characteristic impedance — 50Ω(Nominal)
Balanced ports impedance, nominal value — 24 + j48.8Ω
Return loss: Unbalanced port [2402 to 2480MHz] 11.9dB typ.
Return loss: Balanced port
(with respect to nominal balanced impedance) 11dB typ.
Attenuation
[880 to 960MHz] 47dB typ.
[1710 to 1880MHz] 29dB typ.
[1880 to 1910MHz] 27dB typ.
[2110 to 2170MHz] 10dB typ.
[4804 to 4960MHz] 36dB typ.
Phase difference at balanced port [2402 to 2480MHz] 176deg typ.
Amplitude imbalance at balanced port [2402 to 2480MHz] 0.9dB typ.
Temperature range Operating –40 to +85°C
Storage –40 to +85°C
0.0 2.01.0 4.0 5.0 8.07.06.03.0
Frequency(GHz)
–5.0
–4.0
–3.0
–2.0
–1.0
0
Insertion loss(dB)
2.0 2.2 2.4 3.02.82.6
Frequency(GHz)
0
–15
–20
–5
–10
Return loss(dB)
2.3 2.4 2.62.5
Frequency(GHz)
200
165
170
175
160
185
180
195
190
Phase difference(deg.)
2.0 2.2 2.4 3.02.82.6
Frequency(GHz)
0
–15
–20
–5
–10
Return loss(dB)
2.3 2.52.4 2.6
Frequency(GHz)
–10
–5
0
5
10
Amplitude imbalance(dB)
0.0 2.01.0 4.0 5.0 8.07.06.03.0
Frequency(GHz)
–70
–60
–50
–40
–30
–20
–10
0
Common mode(dB)
(9/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
Multilayer Chip Band Pass Filters(Balance Output Type)
For Bluetooth & 2.4GHz W-LAN
DEA Series DEA202450BT-7100C1
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERN EVALUATION BOARD
Conformity to RoHS Directive
0.8max. 0.3±0.2
1.25±0.15
0.25±0.2
2.0±0.15
7
6
5
4
8
1
2
3
0.3±0.2
0.2±0.20.35±0.15
Dimensions in mm
0.65±0.15
1 Unbalanced port
2 GND
3NC
4 GND
5 GND
6 Balanced port1
7 Balanced port2
8 GND
Terminal functions
0.6
0.2
0.55 0.65
2.6
0.35
1.95
0.35
Dimensions in mm Port extension value
Port1 = 139.56p[sec]
Port2 = 143.16p[sec]
Port3 = 139.56p[sec]
Port1
UnBalance
Port3 Balance2
Port2
Balance1
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(10/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
ELECTRICAL CHARACTERISTICS
• Ta:+25°C
FREQUENCY CHARACTERISTICS
Unbalance 50Ω/Balance 25+j30Ω
SDS21 INSERTION LOSS SDS21 ATTENUATION[100Ω REFERENCE]
AMPLITUDE BALANCE PHASE BALANCE
SSS11 UNBALANCE RETURN LOSS SDD22 BALANCE RETURN LOSS
Item Minimum value Typical value Maximum value
Unbalanced port characteristics impedance (Ω)50[Nominal]
Balanced port characteristics impedance (Ω) 25+j30[Nominal]
Differential mode insertion loss [2402 to 2480MHz] (dB) — 3.0 3.5
Differential mode attenuation
[100Ω reference]
[65 to 108MHz] (dB) 35 70 —
[824 to 960MHz] (dB) 35 46 —
[1570 to 1580MHz] (dB) 30 43 —
[1710 to 1990MHz] (dB) 35 44 —
[2010 to 2170MHz] (dB) 23 31 —
[7200 to 7500MHz] (dB) 20 40 —
Common mode attenuation
[25Ω reference]
[1570 to 1580MHz] (dB) 30 34 —
[1710 to 1990MHz] (dB) 20 36 —
[2010 to 2170MHz] (dB) 20 33 —
[4800 to 5000MHz] (dB) 18 25 —
In/out return loss (dB) 9 13 —
Phase difference at balanced port (deg.) 180±10 174 —
Amplitude imbalance at balanced port (dB) 0±2.8 1.7 —
Temperature range Operating (°C) –40 — +85
Storage (°C) –40 — +85
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–5.0
–4.0
–4.0
–3.0
–3.5
–2.0
–2.5
–1.5
Insertion loss(dB)
1: 2.402GHz
–2.99dB
2: 2.441GHz
–2.79dB
3: 2.480GHz
–2.69dB
123
–600 0.5 1 8
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.51.5
–40
–50
–30
–20
–10
0
Attenuatio
n(dB)
Frequency(GHz)
1: 0.065GHz
–76.79dB
2: 0.108GHz
–70.17dB
3: 0.824GHz
–48.41dB
4: 0.960GHz
–46.93dB
5: 1.570GHz
–43.81dB
6: 1.580GHz
–43.81dB
7: 1.710GHz
–44.55dB
8: 1.990GHz
–54.95dB
9: 2.170GHz
–31.70dB
10: 7.200GHz
–40.09dB
345
6
7
8
9
10
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
1.0
2.0
3.0
4.0
5.0
–5.0
–4.0
–3.0
–2.0
–1.0
0
Amplitude balance(dB)
1: 2.402GHz
–1.67dB
2: 2.441GHz
–1.33dB
3: 2.480GHz
–0.91 dB
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
160
170
180
190
165
175
185
195
200
Phase balance(deg.)
1: 2.402GHz
176.6deg.
2: 2.441GHz
175.4deg.
3: 2.480GHz
174.2deg.
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–30
–25
–20
–15
–10
–5
0
Return loss(dB)
1: 2.402GHz
–14.56dB
2: 2.441GHz
–14.42dB
3: 2.480GHz
–18.12dB
1
3
2
–30
–25
–20
–15
–10
–5
0
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
0
Return loss(dB)
1: 2.402GHz
–13.72dB
2: 2.441GHz
–13.33dB
3: 2.480GHz
–14.45dB
123
(11/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
FREQUENCY CHARACTERISTICS
Unbalance 50Ω/Balance 25+j30Ω
SCS21 ATTENUATION[25Ω REFERENCE] SCC22 ANGLE[25Ω REFERENCE]
SCC22 MAGNITUDE[25Ω REFERENCE]
SMITH CHARTS
S11 SDD22
01 8
234567
Frequency(GHz)
–70
–40
–50
–60
–30
–20
–10
0
Attenuatio
n(dB)
1: 0.088GHz
–19.18dB
2: 0.108GHz
–17.46dB
3: 4.800GHz
–22.98dB
4: 4.900GHz
–22.82dB
5: 5.000GHz
–23.01dB
1
2
3
4
5
4 4.25 4.5 6
4.75
5 5.25
5.5
5.75
Frequency(GHz)
–180
–80
–130
–30
170
70
20
120
Angle
(deg)
1: 4.80GHz
–104.64deg.
2: 4.90GHz
–120.31deg.
3: 5.00GHz
–132.0deg.
123
4 4.25 4.5 6
4.75
5 5.25
5.5
5.75
Frequency(GHz)
0
0.6
0.5
0.4
0.3
0.2
0.1
0.7
0.8
0.9
1
Magnitude
1: 4.80GHz
0.60
2: 4.90GHz
0.70
3: 5.00GHz
0.77
1
23
(12/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
Multilayer Chip Band Pass Filters(Balance Output Type)
For Bluetooth & 2.4GHz W-LAN
DEA Series DEA202350BT-7196A1
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERNS EVALUATION BOARD
ELECTRICAL CHARACTERISTICS
• Ta:+25°C
Item Typical value
Frequency range(Pass band) 2300 to 2400MHz
Insertion loss [+25°C] 2.2dB max. 1.76dB
[–40 to +85°C] 2.5dB max. —
Single ended port characteristic impedance 50Ω (Nominal) —
Balanced port differential characteristics impedance 100dB —
Attenuation
[500 to 1000MHz] 34dB min. 44.3dB
[1000 to 1785MHz] 26dB min. 31.6dB
[1785 to 1880MHz] 25dB min. 34.9dB
[1880 to 1980MHz] 15dB min. 22.6dB
[2720 to 5900MHz] 10dB min. 13.2dB
Single ended return loss [2300 to 2400MHz] — 17dB
Phase difference at balanced port [2300 to 2400MHz] — 185.1deg.
Amplitude imbalance at balanced port [2300 to 2400MHz] — 0.13dB
Temperature range Operating –40 to +85°C
Storage –40 to +85°C
Conformity to RoHS Directive
0.9±0.1 0.3±0.2
1.25±0.15
0.25±0.2
2.0±0.15
7
6
5
4
8
1
2
3
0.3±0.2
0.2±0.20.35±0.15
0.65±0.15
Top view Bttom view
Dimensions in mm
1 Unbalanced port
2NC
3NC
4 GND
5 Balanced port
6 GND
7 Balanced port
8 GND
Terminal functions
0.60
0.20
0.55 0.65
2.60
0.35
1.95
0.35
Dimensions in mm
Port extension value is
139.56ps for all port.
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(13/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
FREQUENCY CHARACTERISTICS
Unbalance 50Ω/Balance 100Ω
SDS21 INSERTION LOSS
AMPLITUDE BALANCE
S11 UNBALANCE RETURN LOSS
SCS21
SDS21 ATTENUATION
PHASE BALANCE
SDD22 BALANCE RETURN LOSS
SMITH CHARTS
S11 SDD22
1.9 2 2.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–7.5
–4.0
–4.5
–3.0
–3.5
–6.0
–6.5
–5.0
–5.5
–2.0
–2.5
–1.5
Insertion loss(dB)
1: 2.300GHz
–1.72dB
2: 2.400GHz
–1.76dB
12
1.9 2 2.22.1 2.92.82.3 2.4 2.5 2.6 2.7
Frequency(GHz)
1.5
1.0
0.5
2.5
2.0
3.0
–2.5
–3.0
–1.5
–2.0
–1.0
–0.5
0
Amplitude balance(dB)
1: 2.300GHz
0.13dB
2: 2.400GHz
–0.10dB
12
Frequency(GHz)
–30
–15
–10
–25
–20
–5
0
Return loss(dB)
1: 2.300GHz
–29.14dB
2: 2.400GHz
–26.60dB
1.9 2 2.22.1 2.92.82.3 2.4 2.5 2.6 2.7
12
–70
0.5 1.516
2345
2.5 3.5 4.5 5.5
–40
–50
–60
–30
–20
–10
0
Attenuatio
n(dB)
Frequency(GHz)
1: 1.000GHz
–42.81dB
2: 2.300GHz
–36.15dB
3: 2.400GHz
–29.12dB
4: 2.720GHz
–25.46dB
1
2
34
–60 10.5 8
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.51.5
–40
–50
–30
–20
–10
0
Attenuatio
n(dB)
Frequency(GHz)
1: 1.000GHz
–44.25dB
2: 1.785GHz
–31.57dB
3: 1.880GHz
–34.90dB
4: 1.980GHz
–22.59dB
5: 2.720GHz
–13.16dB
6: 5.900GHz
–34.46dB
1
2
3
4
5
6
Frequency(GHz)
150
160
170
180
190
165
155
175
185
195
210
200
205
Phase balance(deg.)
1: 2.300GHz
182.1deg.
2: 2.400GHz
185.1deg.
1.9 2 2.22.1 2.92.82.3 2.4 2.5 2.6 2.7
12
Frequency(GHz)
Return loss(dB)
1: 2.300GHz
–16.99dB
2: 2.400GHz
–18.07dB
–30
–15
–10
–25
–20
–5
0
1.9 2 2.22.1 2.92.82.3 2.4 2.5 2.6 2.7
2
1
(14/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
Multilayer Chip Band Pass Filters(Balance Output Type)
For Bluetooth & 2.4GHz W-LAN
DEA Series DEA202450BT-7077A1
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERN
Conformity to RoHS Directive
0.95±0.1 0.3±0.2
1.25±0.15
0.25±0.2
2.0±0.15
7
6
5
4
8
1
2
3
0.3±0.2
0.2±0.20.35±0.15
Dimensions in mm
0.65±0.15
Top view Bttom view
1 Unbalanced port
2 DC feed + RF GND or GND
3NC
4 GND
5 Balanced port
6 GND
7 Balanced port
8 GND
Terminal functions
0.60
0.20
0.55 0.65
2.60
0.35
1.95
0.35
Dimensions in mm
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(15/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
ELECTRICAL CHARACTERISTICS
• Ta:+25°C
FREQUENCY CHARACTERISTICS
Unbalance 50Ω/Balance 34+j72Ω
SDS21 INSERTION LOSS
S11 UNBALANCE RETURN LOSS
AMPLITUDE BALANCE
SCS21 CMRR
SDS21 ATTENUATION
SDD22 BALANCE RETURN LOSS
PHASE BALANCE
Frequency range(Pass band) 2400MHz 2500MHz
Insertion loss [+25°C] — 3.5dB max.
[–40 to +85°C] — 3.8dB max.
Single ended port characteristic impedance 50Ω (Nominal) —
Balanced port differential characteristics impedance 34+j72Ω(Nominal) —
Attenuation
[880 to 960MHz] 40dB —
[1710 to 1880MHz] 38dB —
[1880 to 1990MHz] 38dB —
[2110 to 2170MHz] 17dB —
[4800 to 5000MHz] 25dB —
[7200 to 7500MHz] 27dB —
Single ended return loss [2400 to 2500MHz] 9.0dB —
Balanced return loss [2400 to 2500MHz] 9.0dB —
Phase difference at balanced port 170deg. 190deg.
Amplitude imbalance at balanced port –1.0dB 1.0dB
Temperature range Operating –40 to +85°C
Storage –40 to +85°C
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–5.0
–4.0
–4.0
–3.0
–3.5
–2.0
–2.5
–1.0
–1.5
–0.5
0
Insertion loss(dB)
1: 2.400GHz
–2.89dB
2: 2.450GHz
–2.53dB
3: 2.500GHz
–2.37dB
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–25
–20
–15
–10
–5
0
Return loss(dB)
1: 2.400GHz
–33.911dB
2: 2.450GHz
–19.532dB
3: 2.500GHz
–18.328dB
12
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
1.5
1.0
0.5
2.5
2.0
3.0
–2.5
–3.0
–1.5
–2.0
–1.0
–0.5
0
Amplitude balance(dB)
123
1: 2.400GHz
–0.243dB
2: 2.450GHz
–0.120dB
3: 2.500GHz
–0.068dB
–70
0.5 1 8
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.51.5
–40
–50
–60
–30
–20
–10
0
Attenuatio
n(dB)
Frequency(GHz)
1
23
1: 2.400GHz
–39.33dB
2: 2.450GHz
–45.42dB
3: 2.500GHz
–47.16dB
–70
0.5 1 8
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.51.5
–40
–50
–60
–30
–20
–10
0
Attenuatio
n(dB)
Frequency(GHz)
1: 0.960GHz
–45.63dB
2: 1.990GHz
–46.19dB
3: 2.170GHz
–27.19dB
4: 4.800GHz
–38.01dB
5: 5.000GHz
–47.35dB
6: 7.200GHz
–35.25dB
7: 7.500GHz
–35.19dB
12
3
4
5
67
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–25
–20
–15
–10
–5
0
Return loss(dB)
1: 2.400GHz
–13.824dB
2: 2.450GHz
–12.764dB
3: 2.500GHz
–13.729dB
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
160
170
180
190
165
175
185
195
200
Phase balance(deg.)
1: 2.400GHz
179.2deg.
2: 2.450GHz
179.7deg.
3: 2.500GHz
180.5deg.
123
(16/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
SMITH CHARTS
S11 SDD22
(17/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
Multilayer Chip Band Pass Filters(Balance Output Type)
For Bluetooth & 2.4GHz W-LAN
DEA Series DEA202450BT-7089C3
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERNS
ELECTRICAL CHARACTERISTICS
• Ta:+25°C
Item Typical value
Frequency range(Pass band) 2400 to 2500MHz
Insertion loss [+25°C] 3.4dB max. 2.95dB
[–40 to +85°C] 3.7dB max. —
Single ended port characteristic impedance 50Ω (Nominal) —
Balanced port differential characteristics impedance 55+j50Ω (Nominal) —
Attenuation
[10 to 915MHz] 40dB min. 46dB
[925 to 960MHz] 39dB min. 45dB
[1570 to 1580MHz] 30dB min. 44dB
[1710 to 1785MHz] 39dB min. 47dB
[1805 to 1880MHz] 25dB min. 55dB
[1850 to 1910MHz] 38dB min. 51dB
[1920 to 1990MHz] 33dB min. 48dB
[2112 to 2168MHz] 20dB min. 31dB
[4800 to 5000MHz] 26dB min. 38dB
[7200 to 7500MHz] 26dB min. 35dB
Single ended return loss [2400 to 2500MHz] 8.5dB min. 13dB
Balanced return loss [2400 to 2500MHz] 8.5dB min. 14dB
Phase difference at balanced port [2400 to 2500MHz] 180±10deg. 183deg.
Amplitude imbalance at balanced port [2400 to 2500MHz] 0±2.0dB –0.5dB
Temperature range Operating –40 to +85°C
Storage –40 to +85°C
Conformity to RoHS Directive
1.0max. 0.3±0.2
1.25±0.15
0.25±0.2
2.0±0.15
7
6
5
4
8
1
2
3
0.3±0.2
0.2±0.20.35±0.15
0.65±0.15
Top view Bttom view
Dimensions in mm
1 Unbalanced port
2NC
3NC
4 GND
5 Balanced port
6 GND
7 Balanced port
8 GND
Terminal functions
0.60
0.20
0.55 0.65
2.60
0.35
1.95
0.35
Dimensions in mm
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(18/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
FREQUENCY CHARACTERISTICS
Unbalance 50Ω/Balance 55+j50Ω
SDS21 INSERTION LOSS
S11 UNBALANCE RETURN LOSS
AMPLITUDE BALANCE
SCS21 CMRR
SDS21 ATTENUATION
SDD22 BALANCE RETURN LOSS
PHASE BALANCE
SMITH CHARTS
S11 SDD22
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–5.0
–4.0
–4.0
–3.0
–3.5
–2.0
–2.5
–1.0
–1.5
–0.5
0
Insertion loss(dB)
1: 2.400GHz
–2.74dB
2: 2.450GHz
–2.46dB
3: 2.500GHz
–2.34dB
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–20
–15
–10
–5
0
Return loss(dB)
1: 2.400GHz
–15.452dB
2: 2.450GHz
–12.344dB
3: 2.500GHz
–10.555dB
1
2
3
2.2 2.82.3 2.4 2.5 2.6 2.7
Frequency(GHz)
1.5
1.0
0.5
2.5
2.0
3.0
–2.5
–3.0
–1.5
–2.0
–1.0
–0.5
0
Amplitude balance(dB)
123
1: 2.400GHz
0.589dB
2: 2.450GHz
0.693dB
3: 2.500GHz
0.762dB
–7001 8
234567
–40
–50
–60
–30
–20
–10
0
Attenuatio
n(dB)
Frequency(GHz)
1
23
1: 0.100GHz
–47.78dB
2: 4.800GHz
–18.79dB
3: 7.200GHz
–20.34dB
–60 0.5 108
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.51.5
–40
–50
–30
–20
–10
0
Attenuatio
n(dB)
Frequency(GHz)
1: 0.960GHz
–44.87dB
2: 1.990GHz
–41.97dB
3: 2.170GHz
–28.65dB
4: 4.800GHz
–49.39dB
5: 5.000GHz
–39.90dB
6: 7.200GHz
–32.75dB
7: 7.500GHz
–32.13dB
12
3
4
5
67
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–20
–15
–10
–5
0
Return loss(dB)
1: 2.400GHz
–20.719dB
2: 2.450GHz
–12.742dB
3: 2.500GHz
–10.658dB
3
2
2.2 2.82.3 2.4 2.5 2.6 2.7
Frequency(GHz)
160
170
180
190
165
175
185
195
200
Phase balance(deg.)
1: 2.400GHz
180.6deg.
2: 2.450GHz
180.6deg.
3: 2.500GHz
181.0deg.
123
(19/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
Multilayer Chip Band Pass Filters(Balance Output Type)
For Bluetooth & 2.4GHz W-LAN
DEA Series DEA202450BT-7112B1
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERN EVALUATION BOARD
Conformity to RoHS Directive
1.0max. 0.3±0.2
1.25±0.15
0.25±0.2
2.0±0.15
7
6
5
4
8
1
2
3
0.3±0.2
0.2±0.20.35±0.15
Dimensions in mm
0.65±0.15
Top view Bttom view
1 Unbalanced port
2NC
3NC
4 GND
5 Balanced port
6 GND
7 Balanced port
8 GND
Terminal functions
0.60
0.20
0.55 0.65
2.60
0.35
1.95
0.35
Dimensions in mm
Port extension value is
139.56ps for all port.
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(20/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
ELECTRICAL CHARACTERISTICS
• Ta:+25°C
FREQUENCY CHARACTERISTICS
Unbalance 50Ω/Balance 50+j40Ω
SDS21 INSERTION LOSS SDS21 ATTENUATION
AMPLITUDE BALANCE PHASE BALANCE
S11 UNBALANCE RETURN LOSS SDD22 BALANCE RETURN LOSS
Frequency range(Pass band) 2400MHz 2500MHz
Insertion loss [+25°C] — 2.5dB max.
[–40 to +85°C] — 2.8dB max.
Single ended port characteristic impedance 50Ω (Nominal) —
Balanced port differential characteristics impedance 50+j40Ω(Nominal) —
Attenuation
[10 to 915MHz] 41dB —
[925 to 960MHz] 34dB
[1570 to 1580MHz] 30dB
[1710 to 1785MHz] 40dB
[1805 to 1880MHz] 26dB —
[1850 to 1910MHz] 40dB —
[1920 to 1990MHz] 31dB —
[4800 to 5000MHz] 25dB —
[7200 to 7500MHz] 20dB —
Single ended return loss [2400 to 2500MHz] 9dB —
Balanced return loss [2400 to 2500MHz] 9dB —
Phase difference at balanced port [2400 to 2500MHz] 170deg. 190deg.
Amplitude imbalance at balanced port [2400 to 2500MHz] –2dB 2dB
Common mode attenuation [88 to 108MHz] 15dB —
[4800 to 5000MHz] 18dB —
Common mode impecdance
[4900MHz]
Magnitude 0.6 —
Angle –45deg. 12deg.
Temperature range Operating –40 to +85°C
Storage –40 to +85°C
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–5.0
–4.0
–4.0
–3.0
–3.5
–2.0
–2.5
–1.0
–1.5
–0.5
0
Insertion loss(dB)
1: 2.400GHz
–1.81dB
2: 2.450GHz
–1.64dB
3: 2.500GHz
–1.57dB
123
–600 0.5 1 8
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.51.5
–40
–50
–30
–20
–10
0
Attenuatio
n(dB)
Frequency(GHz)
1: 0.915GHz
–45.94dB
2: 1.785GHz
–51.41dB
3: 1.850GHz
–46.38dB
4: 1.910GHz
–44.85dB
5: 1.990GHz
–45.28dB
6: 4.800GHz
–37.17dB
7: 5.000GHz
–36.18dB
8: 7.200GHz
–30.14dB
9: 7.500GHz
–28.67dB
1
2
3
4
5
67
89
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
1.5
1.0
0.5
2.5
2.0
3.0
–2.5
–3.0
–1.5
–2.0
–1.0
–0.5
0
Amplitude balance(dB)
1: 2.400GHz
–0.30dB
2: 2.450GHz
–0.43dB
3: 2.500GHz
–0.50 dB
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
160
170
180
190
165
175
185
195
200
Phase balance(deg.)
1: 2.400GHz
184.1deg.
2: 2.450GHz
183.7deg.
3: 2.500GHz
183.0deg.
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–30
–25
–20
–15
–10
–5
0
Return loss(dB)
1: 2.400GHz
–26.12dB
2: 2.450GHz
–26.98dB
3: 2.500GHz
–25.73dB
13
2–30
–25
–20
–15
–10
–5
0
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
0
Return loss(dB)
1: 2.400GHz
–25.90dB
2: 2.450GHz
–23.20dB
3: 2.500GHz
–24.58dB
1
23
(21/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
FREQUENCY CHARACTERISTICS
Unbalance 50Ω/Balance 50+j40Ω
SCS21
SCC22 MAGNITUDE SCC22 ANGLE
0 0.5 1 8
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.51.5
Frequency(GHz)
–70
–40
–50
–60
–30
–20
–10
0
Attenuatio
n(dB)
1: 0.08GHz
–24.82dB
2: 0.108GHz
–23.65dB
3: 4.800GHz
–36.27dB
4: 5.000GHz
–29.93dB
12
3
4
4.3 4.4 4.5 5.5
4.7
4.8
4.9
5
5.1
5.2
5.3
5.44.6
Frequency(GHz)
0
0.6
0.5
0.4
0.3
0.2
0.1
0.7
0.8
0.9
1
Magnitude
1: 4.90GHz
0.81dB
1
4.3 4.4 4.5 5.5
4.7
4.8
4.9
5
5.1
5.2
5.3
5.44.6
Frequency(GHz)
–75
–45
–60
–30
–15
45
0
15
30
Angle
(deg)
1: 4.90GHz
–24.57deg.
1
(22/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
Multilayer Chip Band Pass Filters(Balance Output Type)
For Bluetooth & 2.4GHz W-LAN
DEA Series DEA202450BT-7112E1
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERN EVALUATION BOARD
Conformity to RoHS Directive
1.0max. 0.3±0.2
1.25±0.15
0.25±0.2
2.0±0.15
7
6
5
4
8
1
2
3
0.3±0.2
0.2±0.20.35±0.15
Dimensions in mm
0.65±0.15
1 Unbalanced port
2NC
3NC
4 GND
5 Balanced port
6 GND
7 Balanced port
8 GND
Terminal functions
0.6
0.2
0.55 0.65
2.6
0.35
1.95
0.35
Dimensions in mm
Port extension value is 139.56ps for all port.
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(23/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
ELECTRICAL CHARACTERISTICS
• Ta:+25°C
FREQUENCY CHARACTERISTICS
Unbalance 50Ω/Balance 50+j40Ω
SDS21 INSERTION LOSS SDS21 ATTENUATION
AMPLITUDE BALANCE PHASE BALANCE
S11 UNBALANCE RETURN LOSS SDD22 BALANCE RETURN LOSS
Item Minimum value Typical value Maximum value
Frequency range(Pass band) (MHz) 2400 — 2500
Insertion loss [+25°C] (dB) — — 2.5
[–40 to +85°C] (dB) — — 2.8
Single ended port characteristic impedance (Ω)50[Nominal]
Balanced port differential characteristics impedance (Ω)50+j40
Attenuation
[10 to 915MHz] (dB) 41 — —
[925 to 960MHz] (dB) 34 — —
[1570 to 1580MHz] (dB) 30 — —
[1710 to 1785MHz] (dB) 40 — —
[1805 to 1880MHz] (dB) 26 — —
[1850 to 1910MHz] (dB) 40 — —
[1920 to 1990MHz] (dB) 31 — —
[4800 to 5000MHz] (dB) 25 — —
[7200 to 7500MHz] (dB) 20 — —
Single ended return loss [2400 to 2500MHz] (dB) 9 — —
Balanced return loss [2400 to 2500MHz] (dB) 9 — —
Phase difference at balanced port [2400 to 2500MHz] (deg.) 170 — 190
Amplitude imbalance at balanced port [2400 to 2500MHz] (dB) –2 — 2
Common mode attenuation [88 to 108MHz] (dB) 15 — —
[4800 to 5000MHz] (dB) 18 — —
Common mode impecdance
[4900MHz]
Magnitude 0.6 — —
Angle (deg.) 15 — 75
Power capacity (mW) — — 500
Temperature range Operating (°C) –40 — +85
Storage (°C) –40 — +85
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–5.0
–4.0
–4.5
–3.0
–3.5
–2.0
–2.5
–1.0
–1.5
–0.5
0
Insertion loss(dB)
1: 2.400GHz
–2.01dB
2: 2.450GHz
–1.78dB
3: 2.500GHz
–1.66dB
123
–600 0.5 1 8
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.51.5
–40
–50
–30
–20
–10
0
Attenuatio
n(dB)
Frequency(GHz)
1: 0.915GHz
–44.46dB
2: 1.710GHz
–47.78dB
3: 1.785GHz
–52.07dB
4: 1.850GHz
–62.53dB
5: 1.910GHz
–63.11dB
12
367
8
910
6: 1.990GHz
–52.81dB
7: 4.800GHz
–54.88dB
8: 5.000GHz
–47.52dB
9: 7.200GHz
–34.16dB
10: 7.500GHz
–33.97dB
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
1.5
1.0
0.5
2.5
2.0
3.0
–2.5
–3.0
–1.5
–2.0
–1.0
–0.5
0
Amplitude balance(dB)
1: 2.400GHz
0.10dB
2: 2.450GHz
–0.07dB
3: 2.500GHz
–0.17dB
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
160
170
180
190
165
175
185
195
200
Phase balance(deg.)
1: 2.400GHz
180.8deg.
2: 2.450GHz
180.3deg.
3: 2.500GHz
179.5deg.
123
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
–30
–25
–20
–15
–10
–5
0
Return loss(dB)
1: 2.400GHz
–29.29dB
2: 2.450GHz
–22.70dB
3: 2.500GHz
–22.06dB
1
3
2
–30
–25
–20
–15
–10
–5
0
232.3 2.4 2.5 2.6 2.7 2.8 2.92.1 2.2
Frequency(GHz)
0
Return loss(dB)
1: 2.400GHz
–24.45dB
2: 2.450GHz
–19.43dB
3: 2.500GHz
–18.41dB
1
23
(24/24)
001-02 / 20101207 / e721_multibpf_balance_dea01
• All specifications are subject to change without notice.
FREQUENCY CHARACTERISTICS
Unbalance 50Ω/Balance 50+j40Ω
SCS21 ATTENUATION SCC22 ANGLE
SCC22 MAGNITUDE
SMITH CHARTS
S11 SDD22
0 0.5 1 8
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.51.5
Frequency(GHz)
–70
–40
–50
–60
–30
–20
–10
0
Attenuatio
n(dB)
1: 0.088GHz
–25.24dB
2: 0.108GHz
–24.25dB
3: 4.800GHz
–38.03dB
4: 5.000GHz
–29.55dB
1
2
3
4
4 4.25 4.5 6
4.75
5 5.25
5.5
5.75
Frequency(GHz)
–100
–50
150
50
0
100
Angle
(deg.)
1: 4.80GHz
69.30deg.
2: 4.90GHz
56.95deg.
3: 5.00GHz
43.2deg.
123
4 4.25 4.5 6
4.75
5 5.25
5.5
5.75
Frequency(GHz)
0
0.6
0.4
0.2
0.8
1
Magnitude
1: 4.80GHz
0.83
2: 4.90GHz
0.82
3: 5.00GHz
0.80
123
