Optical fiber connector SC2-type Plug LGC-300 series SC-type JIS C 5973 F04 type The SC2-type plug consists of a plug housing and ferrule. The plug housing is applicable to the simplex only, while the ferrule (Refer to page L-10) is the same as in FC-type Optical fiver connector plug or plugin type (DS) optical fiber connector plug. This plug is inserted or pulled out by using the exclusive removing tool (LGC-KP2). SC2-type Plug Housing (SC2-PH type Plug Housing) Applicable to Optical Cords having on Outside Diameter of o2 or o2.8mm (The weight reduction has been achieved by using a resin stopper.) Item Number LGC-PH373MK+R LGC-PH373MKL+R LGC-PH374MK+R LGC-PH374MKL+R Applicable Outside Diameter Note of Optical fiber cords o2mm o2.8mm For PC polishing (Boot color : Blue) For AdPC polishing (Boot color : Mauve) For PC polishing (Boot color : Blue) For AdPC polishing (Boot color : Mauve) unit(mm) 55 REF. 7.2 3.4 6 Ferrule is Excluded. Applicable to Optical Cords having on Outside Diameter of o0.9mm Item Number LGC-PH329+R LGC-PH329L+R Applicable Outside Diameter Note of Optical fiber cords o0.9mm For PC polishing (Boot color : Blue) For AdPC polishing (Boot color : Mauve) 32 REF. unit(mm) 7.2 3.4 6 Ferrule is Excluded. Applicable to Optical Cords having on Outside Diameter of o1.1mm Note of Optical fiber cords o1.1mm For AdPC polishing (Boot color : Mauve) 6 55 REF. 3.4 LGC-PH378H+R Applicable Outside Diameter 7.2 Item Number Ferrule is Excluded. Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole