Type TDL Solid Tantalum Capacitors
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com
Specications
Highlights
Tough plastic case
Low DCL
Low ESR and impedance
Low cost
Temperature stable
UL94VO ammability rating
Resistant to shock and vibration
Capacitance Range:
Voltage Range:
Tolerance:
Operating Temperature Range:
DC Leakage:
Capacitance Change Maximum:
Reverse Voltage (Non-continuous):
Reel Packaging:
RoHS Compliant:
0.10 µF to 330 µF
6 WVdc to 50 WVdc at 85 ºC
±10%, ±20% (±5% by Special Order)
–55 ºC to +125 ºC (with proper derating)
+25 ºC - See ratings limit
+85 ºC - 10 x Ratings limit
+125 ºC - 12.5 x Ratings limit
–10% @ –55 ºC
+10% @ +85 ºC
+12% @ +125 ºC
15% of rated voltage @ 25 ºC
5% of rated voltage @ 85 ºC
1% of rated voltage @ 125 ºC
The Type TDL, like the Type TDC, is a low cost alternative
to molded solid tantalum capacitors, and is construct-
ed in a tough, radial dipped ame retardant plastic
case. It assures the user that it is a top performer with
such attributes as low DCL, Low ESR, low impedance
and a great value with low in-place cost. The 0.10” and
0.20” lead spacings of the TDL are what distinguishes
it from the Type TDC.
Case Quantity
Code Per Reel
A 1,500
B 1,500
C 1,500
D 1,000
E 1,000
F 1,000
Dipped, Radial Leaded, Solid Tantalum Capacitors
Complies with the EU Directive 2002/95/EC
requirement restricting the use of Lead (Pb),
Mercury (Hg), Cadmium (Cd), Hexavalent
chromium (Cr(VI)), PolyBrominated Biphenyls
(PBB) and PolyBrominated Diphenyl Ethers
(PBDE).
DISCONTINUED CONTACT KEMET FOR EQUIVALENT REPLACEMENT
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com
Type TDL Solid Tantalum Capacitors
Capacitor Outline Drawing
Ratings
* Indicates capacitance tolerance: K = ±10%, M = ±20%, (J = ±5%, Special Order)
CDE reserves the right to substitute a tighter tolerance, higher voltage capacitor within the same case size.
226
10
+
226
10
+
H
Max
H
Max
D
Max
D
Max
.140 (3.56) Max
.390 (10)
Min
.020
(0.51)
.020
(0.51)
S S
.187 ±.032
(4.75 ±0.81)
Lead Form
Codes S1, M1
Lead Form
Code M2
M
M
Dimensions - Inches (Millimeters)
Case Leads Quantity
Code D (Max.) H (Max.) S Code Per Reel
A 0180 (4.57) .280 (7.11) .100 (2.54) (Standard) S1 1,500
.200 (5.08) (Special) M2
B 200 (5.08) .300 (7.62) .100 (2.54) (Standard) S1 1,500
.200 (5.08) (Special) M2
C .260 (6.60) .360 (9.14) .100 (2.54) (Standard) S1 1,500
.200 (5.08) (Special) M2
D .340 (8.64) .400 (10.16) .100 (2.54) (Standard) S1 1,000
.200 (5.08) (Special) M2
E .400 (10.16) .560 (14.22) .200 (5.08) (Standard) M1 1,000
F .440 (11.18) .680 (17.27) .200 (5.08) (Standard) M1 1,000
Max. Max. DF
Catalog Case Lead DCL @ +25ºC
Cap Part Number Code Spacing @ +25ºC 120 Hz
(µF) (S) (µA) (%)
6.3 WVdc; 8 Vdc Surge @ 85 ºC
4 WVdc; 5 Vdc Surge @ 125 ºC
3.3 TDL335*006S1A A 0.1 0.5 5
3.9 TDL395*006S1A A 0.1 0.5 5
4.7 TDL475*006S1A A 0.1 0.5 5
5.6 TDL565*006S1A A 0.1 0.5 5
6.8 TDL685*006S1A A 0.1 0.5 5
8.2 TDL825*006S1B B 0.1 0.5 6
10 TDL106*006S1B B 0.1 0.5 6
12 TDL126*006S1B B 0.1 0.6 6
15 TDL156*006S1B B 0.1 0.7 6
18 TDL186*006S1B B 0.1 0.9 6
22 TDL226*006S1C C 0.1 1.1 6
27 TDL276*006S1C C 0.1 1.3 6
33 TDL336*006S1C C 0.1 1.6 6
39 TDL396*006S1C C 0.1 1.9 6
47 TDL476*006S1D D 0.1 2.3 6
56 TDL566*006S1D D 0.1 2.7 6
68 TDL686*006S1D D 0.1 3.3 6
82 TDL826*006S1D D 0.1 3.9 8
100 TDL107*006S1D D 0.1 4.8 8
120 TDL127*006M1D D 0.2 5.8 8
150 TDL157*006M1E E 0.2 7.2 8
180 TDL187*006M1E E 0.2 8.6 8
220 TDL227*006M1E E 0.2 10 8
270 TDL277*006M1E E 0.2 10 8
330 TDL337*006M1F F 0.2 10 8
Max. Max. DF
Catalog Case Lead DCL @ +25ºC
Cap Part Number Code Spacing @ +25ºC 120 Hz
(µF) (S) (µA) (%)
10 WVdc; 13 Vdc Surge @ 85 ºC
7 WVdc; 9 Vdc Surge @ 125 ºC
2.2 TDL225*010S1A A 0.1 0.5 5
2.7 TDL275*010S1A A 0.1 0.5 5
3.3 TDL335*010S1A A 0.1 0.5 5
3.9 TDL395*010S1A A 0.1 0.5 5
4.7 TDL475*010S1A A 0.1 0.5 5
5.6 TDL565*010S1A A 0.1 0.5 5
6.8 TDL685*010S1B B 0.1 0.5 5
8.2 TDL825*010S1B B 0.1 0.7 6
10 TDL106*010S1B B 0.1 0.8 6
12 TDL126*010S1C C 0.1 1.0 6
15 TDL156*010S1C C 0.1 1.2 6
18 TDL186*010S1C C 0.1 1.4 6
22 TDL226*010S1C C 0.1 1.8 6
27 TDL276*010S1C C 0.1 2.2 6
33 TDL336*010S1D D 0.1 2.6 6
39 TDL396*010S1D D 0.1 3.1 6
47 TDL476*010S1D D 0.1 3.8 6
56 TDL566*010S1D D 0.1 4.5 6
68 TDL686*010S1D D 0.1 5.4 6
82 TDL826*010M1E E 0.2 6.6 8
100 TDL107*010M1E E 0.2 8.0 8
120 TDL127*010M1E E 0.2 9.6 8
150 TDL157*010M1E E 0.2 10.0 8
180 TDL187*010M1E E 0.2 10.0 8
220 TDL227*010M1F F 0.2 10.0 8
Listed Catalog Numbers reect standard lead forms as indicat-
ed below.
M2 lead form and lead lengths of .500 (12.7) minumum are
available by special order.
DISCONTINUED CONTACT KEMET FOR EQUIVALENT REPLACEMENT
Type TDL Solid Tantalum Capacitors
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com
Ratings
* Indicates capacitance tolerance: K = ±10%, M = ±20%, (J = ±5%, Special Order)
CDE reserves the right to substitute a tighter tolerance, higher voltage capacitor within the same case size.
Max. Max. DF
Catalog Case Lead DCL @ +25ºC
Cap Part Number Code Spacing @ +25ºC 120 Hz
(µF) (S) (µA) (%)
16 WVdc; 20 Vdc Surge @ 85 ºC
10 WVdc; 12 Vdc Surge @ 125 ºC
1.5 TDL155*016S1A A 0.1 0.5 5
1.8 TDL185*016S1A A 0.1 0.5 5
2.2 TDL225*016S1A A 0.1 0.5 5
2.7 TDL275*016S1A A 0.1 0.5 5
3.3 TDL335*016S1A A 0.1 0.5 5
3.9 TDL395*016S1B B 0.1 0.5 5
4.7 TDL475*016S1B B 0.1 0.6 5
5.6 TDL565*016S1B B 0.1 0.7 5
6.8 TDL685*016S1B B 0.1 0.9 5
8.2 TDL825*016S1C C 0.1 1.0 6
10 TDL106*016S1C C 0.1 1.3 6
12 TDL126*016S1C C 0.1 1.5 6
15 TDL156*016S1C C 0.1 1.8 6
18 TDL186*016S1C C 0.1 2.2 6
22 TDL226*016S1D D 0.1 2.6 6
27 TDL276*016S1D D 0.1 3.2 6
33 TDL336*016S1D D 0.1 4.0 6
39 TDL396*016M1E E 0.2 4.7 6
47 TDL476*016M1E E 0.2 5.6 6
56 TDL566*016M1E E 0.2 6.8 6
68 TDL686*016M1E E 0.2 8.2 6
82 TDL826*016M1E E 0.2 9.8 8
100 TDL107*016M1F F 0.2 10 8
120 TDL127*016M1F F 0.2 10 8
150 TDL157*016M1F F 0.2 10 8
20 WVdc; 26 Vdc Surge @ 85 ºC
13 WVdc; 16 Vdc Surge @ 125 ºC
1.5 TDL155*020S1A A 0.1 0.5 5
1.8 TDL185*020S1A A 0.1 0.5 5
2.2 TDL225*020S1A A 0.1 0.5 5
2.7 TDL275*020S1A A 0.1 0.5 5
3.3 TDL335*020S1A A 0.1 0.5 5
3.9 TDL395*020S1B B 0.1 0.6 5
4.7 TDL475*020S1B B 0.1 0.8 5
5.6 TDL565*020S1B B 0.1 0.9 5
6.8 TDL685*020S1B B 0.1 1.1 5
8.2 TDL825*020S1B B 0.1 1.3 6
Max. Max. DF
Catalog Case Lead DCL @ +25ºC
Cap Part Number Code Spacing @ +25ºC 120 Hz
(µF) (S) (µA) (%)
20 WVdc; 26 Vdc Surge @ 85 ºC
13 WVdc; 16 Vdc Surge @ 125 ºC
1.5 TDL155*020S1A A 0.1 0.5 5
1.8 TDL185*020S1A A 0.1 0.5 5
2.2 TDL225*020S1A A 0.1 0.5 5
2.7 TDL275*020S1A A 0.1 0.5 5
3.3 TDL335*020S1A A 0.1 0.5 5
3.9 TDL395*020S1B B 0.1 0.6 5
4.7 TDL475*020S1B B 0.1 0.8 5
5.6 TDL565*020S1B B 0.1 0.9 5
6.8 TDL685*020S1B B 0.1 1.1 5
8.2 TDL825*020S1B B 0.1 1.3 6
10 TDL106*020S1C C 0.1 1.6 6
12 TDL126*020S1C C 0.1 1.9 6
15 TDL156*020S1C C 0.1 2.4 6
18 TDL186*020S1C C 0.1 2.9 6
22 TDL226*020S1C C 0.1 3.5 6
27 TDL276*020M1E E 0.2 4.3 6
33 TDL336*020M1E E 0.2 5.3 6
39 TDL396*020M1E E 0.2 6.2 6
47 TDL476*020M1E E 0.2 7.5 6
56 TDL566*020M1E E 0.2 9 6
68 TDL686*020M1E E 0.2 10 6
82 TDL826*020M1F F 0.2 10 8
100 TDL107*020M1F F 0.2 10 8
25 WVdc; 32 Vdc Surge @ 85 ºC
16.5 WVdc; 21.5 Vdc Surge @ 125 ºC
1.0 TDL105*025S1A A 0.1 0.5 3
1.2 TDL125*025S1A A 0.1 0.5 5
1.5 TDL155*025S1A A 0.1 0.5 5
1.8 TDL185*025S1A A 0.1 0.5 5
2.2 TDL225*025S1B B 0.1 0.5 5
2.7 TDL275*025S1B B 0.1 0.5 5
3.3 TDL335*025S1B B 0.1 0.7 5
3.9 TDL395*025S1B B 0.1 0.8 5
4.7 TDL475*025S1C C 0.1 0.9 5
5.6 TDL565*025S1C C 0.1 1.1 5
6.8 TDL685*025S1C C 0.1 1.4 5
8.2 TDL825*025S1C C 0.1 1.6 6
DISCONTINUED CONTACT KEMET FOR EQUIVALENT REPLACEMENT
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com
Type TDL Solid Tantalum Capacitors
Ratings
* Indicates capacitance tolerance: K = ±10%, M = ±20%, (J = ±5%, Special Order)
Max. Max. DF
Catalog Case Lead DCL @ +25ºC
Cap Part Number Code Spacing @ +25ºC 120 Hz
(µF) (S) (µA) (%)
25 WVdc; 32 Vdc Surge @ 85 ºC
16.5 WVdc; 21.5 Vdc Surge @ 125 ºC
10 TDL106*025S1C C 0.1 2.0 6
12 TDL126*025S1C C 0.1 2.4 6
15 TDL156*025S1D D 0.1 3.0 6
18 TDL186*025S1D D 0.1 3.6 6
22 TDL226*025S1D D 0.1 4.4 6
27 TDL276*025M1E E 0.2 5.4 6
33 TDL336*025M1E E 0.2 6.6 6
39 TDL396*025M1E E 0.2 7.8 6
47 TDL476*025M1E E 0.2 9.4 6
56 TDL566*025M1E E 0.2 10.0 6
68 TDL686*025M1E F 0.2 10.0 6
35 WVdc; 46 Vdc Surge @ 85 ºC
23 WVdc; 28 Vdc Surge @ 125 ºC
.10 TDL104*035S1A A 0.1 0.5 3
.12 TDL124*035S1A A 0.1 0.5 3
.15 TDL154*035S1A A 0.1 0.5 3
.18 TDL184*035S1A A 0.1 0.5 3
.22 TDL224*035S1A A 0.1 0.5 3
.27 TDL274*035S1A A 0.1 0.5 3
.33 TDL334*035S1A A 0.1 0.5 3
.39 TDL394*035S1A A 0.1 0.5 3
.47 TDL474*035S1A A 0.1 0.5 3
.56 TDL564*035S1A A 0.1 0.5 3
.68 TDL684*035S1A A 0.1 0.5 3
.82 TDL824*035S1A A 0.1 0.5 3
1.0 TDL105*035S1B B 0.1 0.5 3
1.2 TDL125*035S1B B 0.1 0.5 5
1.5 TDL155*035S1B B 0.1 0.5 5
1.8 TDL185*035S1B B 0.1 0.5 5
2.2 TDL225*035S1C C 0.1 0.6 5
2.7 TDL275*035S1C C 0.1 0.7 5
3.3 TDL335*035S1C C 0.1 0.9 5
3.9 TDL395*035S1C C 0.1 1.0 5
4.7 TDL475*035S1D D 0.1 1.3 5
5.6 TDL565*035S1D D 0.1 1.6 5
6.8 TDL685*035S1D D 0.1 1.9 5
8.2 TDL825*035S1D D 0.1 2.3 6
10 TDL106*035S1D D 0.1 2.8 6
12 TDL126*035M1E E 0.2 3.4 6
15 TDL156*035M1E E 0.2 4.2 6
Max. Max. DF
Catalog Case Lead DCL @ +25ºC
Cap Part Number Code Spacing @ +25ºC 120 Hz
(µF) (S) (µA) (%)
35 WVdc; 46 Vdc Surge @ 85 ºC
23 WVdc; 28 Vdc Surge @ 125 ºC
18 TDL186*035M1E E 0.2 5.0 6
22 TDL226*035M1E E 0.2 6.2 6
27 TDL276*035M1E E 0.2 7.6 6
33 TDL336*035M1F F 0.2 9.2 6
39 TDL396*035M1F F 0.2 10.0 6
47 TDL476*035M1F F 0.2 10.0 6
50 WVdc; 65 Vdc Surge @ 85 ºC
33 WVdc; 40 Vdc Surge @ 125 ºC
.10 TDL104*050S1A A 0.1 0.5 3
.12 TDL124*050S1A A 0.1 0.5 3
.15 TDL154*050S1A A 0.1 0.5 3
.18 TDL184*050S1A A 0.1 0.5 3
.22 TDL224*050S1A A 0.1 0.5 3
.27 TDL274*050S1A A 0.1 0.5 3
.33 TDL334*050S1A A 0.1 0.5 3
.39 TDL394*050S1A A 0.1 0.5 3
.47 TDL474*050S1B B 0.1 0.5 3
.56 TDL564*050S1B B 0.1 0.5 3
.68 TDL684*050S1B B 0.1 0.5 3
.82 TDL824*050S1B B 0.1 0.5 3
1.0 TDL105*050S1C C 0.1 0.5 3
1.2 TDL125*050S1C C 0.1 0.5 5
1.5 TDL155*050S1C C 0.1 0.6 5
1.8 TDL185*050S1C C 0.1 0.7 5
2.2 TDL225*050S1D D 0.1 0.9 5
2.7 TDL275*050S1D D 0.1 1.1 5
3.3 TDL335*050S1D D 0.1 1.3 5
3.9 TDL395*050S1D D 0.1 1.6 5
4.7 TDL475*050S1D D 0.1 1.9 5
5.6 TDL565*050S1D D 0.1 2.2 5
6.8 TDL685*050M1F F 0.2 2.7 5
8.2 TDL825*050M1F F 0.2 3.3 6
10 TDL106*050M1F F 0.2 4.0 6
12 TDL126*050M1F F 0.2 4.8 6
15 TDL156*050M1F F 0.2 6.0 6
18 TDL186*050M1F F 0.2 7.2 6
22 TDL226*050M1F F 0.2 8.8 6
DISCONTINUED CONTACT KEMET FOR EQUIVALENT REPLACEMENT
Type TDL Solid Tantalum Capacitors
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com
Part Numbering System
TDL 106 M 050 M 1 F –F
Lead Lead Case RoHS
Series Capacitance Tolerance Voltage Spacing Length Code Compliant
TDL 104 = 0.10 µF J = ±5% 006 = 6.3 Vdc S = .100 1 = Straight
.390 Long
A–F
=
Compliant
105 = 1.0 µF K = ±10% 010 = 10 Vdc M = .200 B
225 = 2.2 µF M = ±20% 015 = 15 dc T = Tape &
Reel
2 = Straight
.187 Long
CBlank= Not
Compliant
186 = 18 µF 020 = 20 Vdc D
107 = 100 µF 025 = 25 Vdc E
035 = 35 Vdc F
050 = 50 Vdc
Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, conrming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specic customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specied by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.
DISCONTINUED CONTACT KEMET FOR EQUIVALENT REPLACEMENT