SPECIFICATION CONTROL DRAWING MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. APPLICATION 1. This sleeve is designed to terminate wire combinations from a single 26 AWG to two 20 AWG wires to a 0.64 x 0.64 x 8.00 (0.025 x 0.025 x 0.315) pin. 2. Sleeve will recover to 1.27 (0.050) I.D. max. 307 Constitution Drive Menlo Park, CA 94025, USA Wire and Harnessing Products TITLE : SOLDERSLEEVE, PCB THROUGH TERMINALS UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: INCHES DIMENSIONS ARE BETWEEN BRACKETS. Tyco Electronics reserves the right to amend ANGLES: N/A TOLERANCES: DCR NUMBER: this drawing at any time. Users should 0.00 N/A D010100 evaluate the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A SCALE: DRAWN BY: DATE: PROD. REV. DOC ISSUE: D-141-24 M. FORONDA 04-Apr.-01 G If this document is printed it becomes uncontrolled. Check for the latest revision. 1 None REPLACES: N/A SIZE: A SHEET: 1 of 1