Datasheet R1RW0416DI Series Wide Temperature Range Version 4M High Speed SRAM (256-kword x 16-bit) REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Description The R1RW0416DI is a 4-Mbit high speed static RAM organized 256-kword x 16-bit. It has realized high speed access time by employing CMOS process (6-transistor memory cell) and high speed circuit designing technology. It is most appropriate for the application which requires high speed, high density memory and wide bit width configuration, such as cache and buffer memory in system. The R1RW0416DI is packaged in 400-mil 44-pin SOJ and 400-mil 44-pin plastic TSOPII for high density surface mounting. Features * Single 3.3 V supply: 3.3 V 0.3 V * Access time: 10ns/12 ns (max) * Completely static memory No clock or timing strobe required * Equal access and cycle times * Directly TTL compatible All inputs and outputs * Operating current: 145/130 mA (max) * TTL standby current: 40 mA (max) * CMOS standby current: 5 mA (max) * Center VCC and VSS type pin out * Temperature range: -40 to +85C Ordering Information Type No. Access time R1RW0416DGE-0PI 10ns R1RW0416DGE-2PI 12 ns R1RW0416DSB-0PI 10 ns R1RW0416DSB-2PI 12 ns REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Package 400-mil 44-pin plastic SOJ (44P0K) 400-mil 44-pin plastic TSOPII (44P3W-H) Page 1 of 11 R1RW0416DI Series Pin Arrangement Pin Description Pin name Function A0 to A17 Address input I/O1 to I/O16 Data input/output CS# OE# Chip select Output enable WE# UB# Write enable Upper byte select LB# VCC Lower byte select Power supply VSS NC Ground No connection REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Page 2 of 11 R1RW0416DI Series Block Diagram REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Page 3 of 11 R1RW0416DI Series Operation Table CS# OE# WE# LB# UB# H x L H L L L L L L L L L L L L Note: Mode VCC current I/O1- -I/O8 I/O9- -I/O16 High-Z Ref. Cycle x x Standby ISB, ISB1 High-Z H x x Output disable ICC High-Z High-Z H H L L L H Read ICC Lower byte read ICC Output Output Output High-Z Read cycle Read cycle H H H H L H Upper byte read ICC ICC High-Z High-Z Output High-Z Read cycle x x L L L L L H Write ICC Lower byte write ICC Input Input Input High-Z Write cycle Write cycle x x L L H H L H Upper byte write ICC ICC High-Z High-Z Input High-Z Write cycle x H: VIH, L: VIL, x: VIH or VIL Absolute Maximum Ratings Parameter Symbol Value Unit Supply voltage relative to VSS VCC -0.5 to +4.6 Voltage on any pin relative to VSS Power dissipation VT PT -0.5* to VCC + 0.5* 1.0 V W Operating temperature Storage temperature Topr Tstg -40 to +85 -55 to +125 C C Storage temperature under bias Tbias -40 to +85 C 1 V 2 Notes: 1. VT (min) = -2.0 V for pulse width (under shoot) 6 ns 2. VT (max) = VCC + 2.0 V for pulse width (over shoot) 6 ns REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Page 4 of 11 R1RW0416DI Series Recommended DC Operating Conditions (Ta = -40 to +85C) Parameter Symbol Supply voltage Typ Max Unit 3 3.0 3.3 3.6 VSS* 4 0 0 0 VIH VIL 2.0 1 -0.5* VCC + 0.5* 0.8 VCC* Input voltage Notes: 1. 2. 3. 4. Min V V 2 V V VIL (min) = -2.0 V for pulse width (under shoot) 6 ns VIH (max) = VCC + 2.0 V for pulse width (over shoot) 6 ns The supply voltage with all VCC pins must be on the same level. The supply voltage with all VSS pins must be on the same level. DC Characteristics (Ta = -40 to +85C, VCC = 3.3 V 0.3 V, VSS = 0 V) Parameter Symbol Min Max Unit Test conditions Input leakage current Output leakage current |ILI| |ILO| 2 2 A A VIN = VSS to VCC VIN = VSS to VCC Operating power supply current ICC 130 mA Standby power supply current ISB 40 mA Min cycle CS# = VIL, IOUT = 0 mA Other inputs = VIH/VIL Min cycle, CS# = VIH, Other inputs = VIH/VIL ISB1 5 mA VOL 0.4 V f = 0 MHz VCC CS# VCC - 0.2 V, (1) 0 V VIN 0.2 V or (2) VCC VIN VCC - 0.2 V IOL = 8 mA VOH 2.4 V IOH = -4 mA Output voltage Capacitance (Ta = +25C, f = 1.0 MHz) Parameter Symbol 1 Input capacitance* 1 Input/output capacitance* Note: Min Max Unit Test conditions CIN 6 pF VIN = 0 V CI/O 8 pF VI/O = 0 V 1. This parameter is sampled and not 100% tested. REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Page 5 of 11 R1RW0416DI Series AC Characteristics (Ta = -40 to +85C, VCC = 3.3 V 0.3 V, unless otherwise noted.) Test Conditions * Input pulse levels: 3.0 V/0.0 V * Input rise and fall time: 3 ns * Input and output timing reference levels: 1.5 V * Output load: See figures (Including scope and jig) Read Cycle R1RW0416DI Parameter Symbol 10ns Version 12ns Version Min Min Max Max Unit Notes Read cycle time Address access time tRC tAA 10 10 12 12 ns ns Chip select access time Output enable to output valid tACS tOE 10 5 12 6 ns ns Byte select to output valid Output hold from address change tBA tOH 3 5 3 6 ns ns Chip select to output in low-Z Output enable to output in low-Z tCLZ tOLZ 3 0 3 0 ns ns 1 1 Byte select to output in low-Z Chip deselect to output in high-Z tBLZ tCHZ 0 5 0 6 ns ns 1 1 Output disable to output in high-Z Byte deselect to output in high-Z tOHZ tBHZ 5 5 6 6 ns ns 1 1 REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Page 6 of 11 R1RW0416DI Series Write Cycle R1RW0416DI Parameter Symbol 10ns Version 12ns Version Min Min Max Max Unit Notes Write cycle time Address valid to end of write tWC tAW 10 7 12 8 ns ns Chip select to end of write Write pulse width tCW tWP 7 7 8 8 ns ns 8 7 Byte select to end of write Address setup time tBW tAS 7 0 8 0 ns ns 5 Write recovery time Data to write time overlap tWR tDW 0 5 0 6 ns ns Data hold from write time Write disable to output in low-Z tDH tOW 0 3 0 3 ns ns 1 Output disable to output in high-Z Write enable to output in high-Z tOHZ tWHZ 5 5 6 6 ns ns 1 1 6 Notes: 1. Transition is measured 200 mV from steady voltage with output load (B). This parameter is sampled and not 100% tested. 2. If the CS# or LB# or UB# low transition occurs simultaneously with the WE# low transition or after the WE# transition, output remains a high impedance state. 3. WE# and/or CS# must be high during address transition time. 4. If CS#, OE#, LB# and UB# are low during this period, I/O pins are in the output state. Then the data input signals of opposite phase to the outputs must not be applied to them. 5. tAS is measured from the latest address transition to the latest of CS#, WE#, LB# or UB# going low. 6. tWR is measured from the earliest of CS#, WE#, LB# or UB# going high to the first address transition. 7. A write occurs during the overlap of a low CS#, a low WE# and a low LB# or a low UB# (tWP). A write begins at the latest transition among CS# going low, WE# going low and LB# going low or UB# going low. A write ends at the earliest transition among CS# going high, WE# going high and LB# going high or UB# going high. 8. tCW is measured from the later of CS# going low to the end of write. REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Page 7 of 11 R1RW0416DI Series Timing Waveforms Read Timing Waveform (1) (WE# = VIH) Read Timing Waveform (2) (WE# = VIH, LB# = VIL, UB# = VIL) REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Page 8 of 11 R1RW0416DI Series Write Timing Waveform (1) (WE# Controlled) REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Page 9 of 11 R1RW0416DI Series Write Timing Waveform (2) (CS# Controlled) REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Page 10 of 11 R1RW0416DI Series Write Timing Waveform (3) (LB#, UB# Controlled, OE# = VIH) REJ03C0109-0201 Rev.2.01 Jun 16, 2010 Page 11 of 11 Revision History R1RW0416DI Series data sheet Rev. Date Page 0.01 1.00 Sep. 30, 2003 Mar. 12, 2004 - -- 2.00 May. 01, 2009 - P1 P5 P6/P7 Description Summary Initial issue Deletion of Preliminary Addition of access grade 10ns version. The product lineup :R1RW0416DSB-0PI/DGE-0PI is added. Operating power supply current of 10ns cycle version is described to the DC characteristic. The timing standard of 10ns version is described at the read cycle The timing standard of 10ns version is described at the write cycle 2.01 Jun. 16, 2010 - Change the format, `Renesas Electronics Corporation', All documents should contain the following section break and paragraph as the last item. The footers of this document refer to the paragraph in order to reference the last page of the document. All trademarks and registered trademarks are the property of their respective owners. C-1 Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 7F, No. 363 Fu Shing North Road Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2010 Renesas Electronics Corporation. All rights reserved. Colophon 1.0