DS HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS FEATURES RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ 1. Breakthrough height of 9.8 mm .386 inch beats the 10 mm .394 inch limit 1c, 2c, and 4c all have the same height (9.8 mm .386 inch). The width of the relay is also the same (9.9 mm .390 inch). Since the only size variable is the length, the shared form makes mounting on printed printing wiring boards easy. 2. Suitable for use in difficult environments Epoxy resin seals the parts and cut off the external atmosphere, thus enabling use in difficult environments. 3. Can be used with automatic solder and automatic wash systems Automatic soldering and automatic washing can be carried out once the parts are mounted on PC boards. 4. Gold-clad twin contacts ensure high reliability Highly stable gold cladding on the contacts ensures that contact resistance changes little over time. Furthermore, the use of twin contacts, a configuration that performs with superior contact reliability, ensures extremely low contact failure rates even under low level loads. 5. Polarized magnetic circuits realize resistance to shock and vibration High-performance polarized magnetic circuits that utilize the energy of permanent magnets have made it possible to create relays with strong resistance to shock and vibration. 6. DIL terminal array enables use of IC sockets 7. Widening scope of application with multicontact latching In addition to single side stable types, you can take advantage of the memory of functions of convenient 1 coil or 2 coil latching relays. TYPICAL APPLICATIONS Besides telecommunications, measuring devices, office equipment, computers and related equipment, DS relays are also recommended for a broad range of applications including business devices, audio systems, and industrial equipment. ORDERING INFORMATION DS E Contact arrangement 1: 1 Form C 2: 2 Form C 4: 4 Form C Sensitivity M: 400 mW nominal operating power S: 200 mW nominal operating power Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching Coil voltage DC 1.5, 3, 5, 6, 9, 12, 24, 48 V Nil: Standard polarity type R: Reverse polarity type Note: 1 coil latching type are manufactured by lot upon receipt of order. Reverse polarity types available (add suffix-R) All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. DS TYPES 1. Standard type Contact arrangement 1 Form C 2 Form C 4 Form C 1.5V DC 3V DC 5V DC 6V DC 9V DC Single side stable type Part No. DS1E-M-DC1.5V DS1E-M-DC3V DS1E-M-DC5V DS1E-M-DC6V DS1E-M-DC9V 2 coil latching type Part No. DS1E-ML2-DC1.5V DS1E-ML2-DC3V DS1E-ML2-DC5V DS1E-ML2-DC6V DS1E-ML2-DC9V 12V DC 24V DC 48V DC 1.5V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 1.5V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC DS1E-M-DC12V DS1E-M-DC24V DS1E-M-DC48V DS2E-M-DC1.5V DS2E-M-DC3V DS2E-M-DC5V DS2E-M-DC6V DS2E-M-DC9V DS2E-M-DC12V DS2E-M-DC24V DS2E-M-DC48V DS4E-M-DC1.5V DS4E-M-DC3V DS4E-M-DC5V DS4E-M-DC6V DS4E-M-DC9V DS4E-M-DC12V DS4E-M-DC24V DS4E-M-DC48V DS1E-ML2-DC12V DS1E-ML2-DC24V DS1E-ML2-DC48V DS2E-ML2-DC1.5V DS2E-ML2-DC3V DS2E-ML2-DC5V DS2E-ML2-DC6V DS2E-ML2-DC9V DS2E-ML2-DC12V DS2E-ML2-DC24V DS2E-ML2-DC48V DS4E-ML2-DC1.5V DS4E-ML2-DC3V DS4E-ML2-DC5V DS4E-ML2-DC6V DS4E-ML2-DC9V DS4E-ML2-DC12V DS4E-ML2-DC24V DS4E-ML2-DC48V Single side stable type Part No. DS1E-S-DC1.5V DS1E-S-DC3V DS1E-S-DC5V DS1E-S-DC6V DS1E-S-DC9V DS1E-S-DC12V DS1E-S-DC24V DS1E-S-DC48V DS2E-S-DC1.5V DS2E-S-DC3V DS2E-S-DC5V DS2E-S-DC6V DS2E-S-DC9V DS2E-S-DC12V DS2E-S-DC24V DS2E-S-DC48V DS4E-S-DC1.5V DS4E-S-DC3V DS4E-S-DC5V DS4E-S-DC6V DS4E-S-DC9V DS4E-S-DC12V DS4E-S-DC24V DS4E-S-DC48V 2 coil latching type Part No. DS1E-SL2-DC1.5V DS1E-SL2-DC3V DS1E-SL2-DC5V DS1E-SL2-DC6V DS1E-SL2-DC9V DS1E-SL2-DC12V DS1E-SL2-DC24V DS1E-SL2-DC48V DS2E-SL2-DC1.5V DS2E-SL2-DC3V DS2E-SL2-DC5V DS2E-SL2-DC6V DS2E-SL2-DC9V DS2E-SL2-DC12V DS2E-SL2-DC24V DS2E-SL2-DC48V DS4E-SL2-DC1.5V DS4E-SL2-DC3V DS4E-SL2-DC5V DS4E-SL2-DC6V DS4E-SL2-DC9V DS4E-SL2-DC12V DS4E-SL2-DC24V DS4E-SL2-DC48V Nominal coil voltage Standard packing: Tube: 50 pcs.; Case: 500 pcs. 2. High sensitivity type Contact arrangement 1 Form C 2 Form C 4 Form C Nominal coil voltage 1.5V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 1.5V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 1.5V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Standard packing: Tube: 50 pcs.; Case: 500 pcs. Notes: 1. 1 coil latching type are manufactured by lot upon receipt of order. 2. Reverse polarity types available (add suffix-R) All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. DS RATING 1. Coil data 1) Single side stable type Type Standard (M) type High sensitivity (S) type Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) 1.5V DC 266.7mA 5.63 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 1.5V DC 133.3mA 80.0mA 66.7mA 44.4mA 33.3mA 16.7mA 8.3mA 22.5 62.5 90 203 360 1,440 5,760 133.3mA 11.3 66.7mA 40.0mA 33.3mA 22.2mA 16.7mA 8.3mA 4.2mA 45 125 180 405 720 2,880 11,520 Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal coil voltage 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Pick-up voltage (at 20C 68F) 70%V or less of nominal voltage (Initial) Drop-out voltage (at 20C 68F) 10%V or more of nominal voltage (Initial) 1 Form C: 80%V or less of nominal voltage 2 Form C, 4 Form C: 70%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) Set voltage (at 20C 68F) Reset voltage (at 20C 68F) Nominal operating power Max. allowable voltage (at 50C 122F) 1 Form C: 120%V of nominal voltage 400mW 2 Form C, 4 Form C: 150%V of nominal voltage 1 Form C: 160%V of nominal voltage 200mW 2 Form C, 4 Form C: 200%V of nominal voltage 2) 2 coil latching type Type Standard (M) type High sensitivity (S) type Nominal coil voltage Set coil Reset coil Set coil Reset coil 1.5V DC 240mA 240mA 6.25 6.25 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 1.5V DC 120mA 72mA 60mA 40mA 30mA 15mA 7.5mA 120mA 72mA 60mA 40mA 30mA 15mA 7.5mA 25 69.4 100 225 400 1,600 6,400 25 69.4 100 225 400 1,600 6,400 120mA 120mA 12.5 12.5 60mA 36mA 30mA 20mA 15mA 7.5mA 3.75mA 60mA 36mA 30mA 20mA 15mA 7.5mA 3.75mA 50 139 200 450 800 3,200 12,800 50 139 200 450 800 3,200 12,800 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 70%V or less of nominal voltage (Initial) 70%V or less of nominal voltage (Initial) 1 Form C: 80%V or less of nominal voltage 1 Form C: 80%V or less of nominal voltage 2 Form C, 4 Form C: 70%V or less of nominal voltage (Initial) 2 Form C, 4 Form C: 70%V or less of nominal voltage (Initial) All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Nominal operating power Set coil Reset coil Max. allowable voltage (at 50C 122F) 1 Form C: 120%V of nominal voltage 360mW 360mW 2 Form C, 4 Form C: 150%V of nominal voltage 1 Form C: 160%V of nominal voltage 180mW 180mW 2 Form C, 4 Form C: 200%V of nominal voltage DS 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. carrying current Min. switching capacity (Reference value)*1 Specifications 2 Form C 4 Form C Max. 50 m (By voltage drop 6 V DC 1A) Ag+Au clad 2 A 30 V DC 60 W, 125 VA 220 V DC, 250 V AC 3A 10A 10m V DC Single side stable (M type: 400 mW, S type: 200 mW); latching (M type: 360 mW, S type: 180 mW) 1 Form C Nominal operating power Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Between open contacts Between contact and coil Temperature rise Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Functional*2 Destructive Functional Vibration resistance Destructive Mechanical Electrical Shock resistance Mechanical characteristics Expected life Conditions Conditions for operation, transport and storage*3 Max. operating speed (at rated load) Unit weight Min. 100M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. 1,000 Vrms for 1min. (500 Vrms for 1min: 1 Form C high sensitivity type) (Detection current: 10mA.) 1,500 Vrms for 1min. (1,000 Vrms for 1min: 1 Form C high sensitivity type) (Detection current: 10mA.) Max. 65C (By resistive method, nominal voltage applied to the coil, contact carrying current: 2A.) Max. 10 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.) Max. 5 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 490 m/s2 Min. 490 m/s2 Min. 294 m/s2 Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 5 mm Min. 108 (107: 1 Form C latching type) (at 600 cpm) Min. 5x105 rated load (at 60 cpm) Ambient temperature: -40C to +70C -40F to +158F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 60 cpm Approx. 3 g .11 oz Approx. 4g .14oz Approx. 7g .25oz Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10V DC, 10mA max. level]) *2 Half-wave pulse of sine wave: 11ms; detection time: 10s *3 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT. REFERENCE DATA 1. Maximum switching capacity 2. Life curve (Resistive load) 3. Contact reliability for AC loads 10 10V 2.0 1.0 0.5 100mA 1A Switching current 0 1 2 Switching current, A 0.1 AC 125V AC Weibull probability data 0.2 10mV 10A 250 V 5.0 125 V DC 0.5A 10.0 0.3A 100 70.0 50.0 30.0 0.5 No. of operations, x104 100V 30 V DC 99.9 99.0 95.0 1 A 2 A 12 50V 5V AC AC 1,000 1,000V Contact voltage F(t), % Tested sample: DS2E-M-DC24V 10 pcs. Operating speed: 20 cpm. Detection level: 200 m 0 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. 10 100 No. of operations, x104 1,000 DS 4-(1). Coil termperature rise (2 Form C single side stable type) 4-(2). Coil tempeature rise (4 Form C single side stable type) 4-(3). Coil temperature rise (2 Form C 2 coil latching type) Tested sample: DS2E-M-DC12V Point measured: Inside the coil Ambient temperature: 18 to 19C 64 to 66F Tested sample: DS4E-M-DC12V Point measured: Inside the coil Ambient temperature: 17 to 18C 63 to 64F Tested sample: DS2E-ML2-DC12V Point measured: Inside the coil Ambient temperature: 20 to 21C 68 to 70F 60 3A 60 0A 40 30 Temperature rise, C 3A 2A 50 Temperature rise, C 50 3A 40 2A 30 0A 10 10 10 0 110 Coil applied voltage, %V 100 0 110 Coil applied voltage, %V Tested sample: DS4E-ML2-DC12V Point measured: Inside the coil Ambient temperature: 20C 68F Test condition: Without diode connected to coil in parallel 4 50 2A 40 0A 30 20 Reset coil Set coil 10 100 110 Coil applied voltage, %V 6-(2). Influence of adjacent mounting (2 Form C) 10 Pick-up voltage ON -10 10 0 Drop-out voltage OFF Release time (mean) 1 110 Coil applied voltage, %V Pick-up voltage (1) (2) (3) OFF OFF ON ON OFF OFF ON ON 0 -10 10 Drop-out voltage 0 -10 5 10 .197 .394 Inter-relay distance , mm inch OFF 60 (1) (2) (3) 40 OFF ON ON 20 0 OFF OFF -20 OFF OFF ON ON OFF OFF ON ON Drop-out voltage 20 0 -20 -60 -80 -80 5 10 .197 .394 Inter-relay distance , mm inch 40 ON -60 -10 60 -40 ON ON (1) (2) (3) 80 OFF Pick-up voltage -40 ON 10 100 120 Coil applied voltage, % 80 OFF 0 ON 2 80 100 6-(3). Influence of adjacent mounting (4 Form C) (1) (2) (3) OFF Operate time (mean) 0 Rate of change, % 0 3 Rate of change, % 3A Operate and release time, ms 60 Reset coil Set coil 6-(1). Influence of adjacent mounting (1 Form C) Rate of change, % 100 5. Operate and release time characteristics (2 Form C single side stable type) Temperature rise, C 0A 30 20 4-(4). Coil temperature rise (4 Form C 2 coil latching type) Rate of change, % 2A 40 20 0 Rate of change, % 50 20 Rate of change, % Temperature rise, C 60 10 20 .394 .787 Inter-relay distance , mm inch All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. 10 20 .394 .787 Inter-relay distance , mm inch DS DIMENSIONS (Unit: mm inch) DS (1 Form C) Single side stable, 2 coil latching External dimensions PC board pattern (Bottom view) Single side stable 2.54 .100 9.9 .390 15 .590 2 coil latching 2.54 .100 5-0.9 dia. 5-.035 dia. 9.3 9.9 .366 .390 6-0.9 dia. 6-.035 dia. 2.54 .100 2.54 .100 0.6 .024 7.62 .300 7.62 .300 3.4 .134 5.08 .200 7.62 .300 0.6 .024 5.6 .221 7.62 .300 0.3 .012 5.08 .200 7.62 .300 5.08 .200 7.62 .300 Schematic (Bottom view) General tolerance: 0.3 .012 Single side stable 1 12 10 2 coil latching 6 1 3 6 7 12 10 7 (Deenergized condition) (Reset condition) Tolerance: 0.1 .004 Note: External dimensions of 1 coil latching types are same as single side stable type. DS (2 Form C) Single side stable External dimensions 20 .780 PC board pattern (Bottom view) 9.9 .390 2.54 .100 8-0.9 dia. 8-.035 dia. 2.54 .100 9.3 9.9 .366 .390 0.6 .024 7.62 .300 3.4 .134 5.08 .200 5.08 .200 7.62 .300 0.6 .024 5.6 .221 7.62 .300 0.3 .012 5.08 .200 5.08 .200 7.62 .300 Schematic (Bottom view) General tolerance: 0.3 .012 9 11 13 16 8 6 4 1 (Deenergized condition) Tolerance: 0.1 .004 Note: External dimensions of 1 coil latching types are same as single side stable type. DS (2 Form C) 2 coil latching External dimensions 20 .780 PC board pattern (Bottom view) 9.9 .390 2.54 .100 10-0.9 dia. 10-.035 dia. 2.54 .100 9.3 9.9 .366 .390 0.6 .024 7.62 .300 3.4 .134 5.08 .200 5.08 .200 5.08 .200 2.54 .100 0.6 .024 5.6 .221 7.62 .300 0.3 .012 5.08 .200 5.08 .200 5.08 .200 2.54 .100 Schematic (Bottom view) General tolerance: 0.3 .012 9 11 13 15 16 8 6 4 2 1 (Reset condition) Tolerance: 0.1 .004 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. DS DS (4 Form C) Single side stable External dimensions PC board pattern (Bottom view) 35.24 1.387 9.9 .390 2.54 .100 14-0.9 dia. 14-.035 dia. 2.54 .100 9.3 9.9 .366 .390 0.6 .024 7.62 .300 3.4 .134 5.08 .200 5.08 .200 7.62 .300 5.08 .200 5.08 .200 5.08 .200 0.6 .024 5.6 .221 7.62 .300 0.3 .012 5.08 .200 5.08 .200 5.08 .200 7.62 .300 5.08 .200 5.08 .200 Schematic (Bottom view) General tolerance: 0.3 .012 9 11 13 8 6 4 16 14 12 10 1 3 5 7 (Deenergized condition) Tolerance: 0.1 .004 Note: External dimensions of 1 coil latching types are same as single side stable type. DS (4 Form C) 2 coil latching External dimensions PC board pattern (Bottom view) 2.54 .100 9.9 .390 35.24 1.387 16-0.9 dia. 16-.035 dia. 2.54 .100 9.3 9.9 .366 .390 0.6 .024 7.62 .300 3.4 .134 5.08 .200 5.08 .200 5.08 5.08 .200 2.54 .200 .100 5.08 .200 5.08 .200 0.6 .024 5.6 .221 7.62 .300 0.3 .012 General tolerance: 0.3 .012 5.08 .200 5.08 .200 5.08 5.08 .200 2.54 .200 .100 5.08 .200 5.08 .200 Schematic (Bottom view) 9 11 13 15 16 14 12 10 8 6 4 2 1 3 5 7 (Reset condition) Tolerance: 0.1 .004 NOTES 1. Coil connection When connecting coils, refer to the wiring diagram to prevent mis-operation or malfunction. 2. External magnetic field Since DS relays are highly sensitive polarized relays, their characteristics will be affected by a strong external magnetic field. Avoid using the relay under that condition. For Cautions for Use, see Relay Technical Information. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd.