PYFjjS PYFjjS
5
Precautions
JPRECAUTIONSFOR CONNECTION
Do notmovethe screwdriverup,down,orfromside toside while
itisinserted inthe hole.Doing somay cause damage tointernal
components(e.g., deformation of the coil spring orcracks inthe
housing)orcause deterioration ofinsulation.
Do notinsert the screwdriveratan angle.Doing somaybreak
the side of the socketand resultin a short--circuit.
Do notinsert two ormorewiresinthe hole.Wiresmay comein
contactwiththe spring causing a termperaturerise ormaybe
subject tosparks.(There aretwowiring holesforeachterminal.)
Insert the screwdriveralong the holewall as shown below.
If lubricating liquid,such asoil,ispresenton the tip of the
screwdriver, the screwdrivermayfall outresulting ininjurytothe
operator.
Insert the screwdriverintothe bottomof the hole. It maynotbe
possilbletoconnectcablesproperlyif the screwdriverisinserted
incorrectly.
JGENERALPRECAUTIONS
Usethe clipto preventrelays fromfloating orfalling outof the
socket.
Do notusethe productifithasbeen dropped on the ground.
Dropping the productmayadverselyaffectperformance.
Confirmthat the socketis securelyattached tothe mounting
track beforewiring. If the socketismounted insecurelyitmayfall
and injurethe operator.
Ensurethat the socketisnotcharged during wiring and
maintenance.Notdoing somayresultin electric shock.
Do notpourwaterorcleaning agentson the product. Doing so
mayresultin electric shock.
Do notusethe socketinlocations subject tosolventsoralkaline
chemicals.
Do notusethe socketinlocations subject to ultravioletlight(e.g.,
directsunlight).Doing somayresultinmarkingsfading,rust,
corrosion or resin deterioration.
Do notdispose of the productinfire.
JREMOVINGFROM MOUNTINGRAIL
Toremovethe socket fromthe mounting rail,insert the tip of the
screwdriverinthe fixturerail and moveitinthe direction shown
below.