855596 320 MHz SAW Filter Applications General Purpose For IF applications Product Features Functional Block Diagram Top view Typical 1dB Bandwidth of 22 MHz Low loss High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions: 9.0 x 7.0 x 1.5mm Hermetic RoHS compliant, Pb-free Pb Input return Gnd 8 Input 6 7 9 5 Gnd Gnd 10 4 Output 1 Gnd General Description Gnd 3 2 Gnd Output return Pin Configuration The 855596 is a high-performance IF SAW filter with a center frequency of 320 MHz and a 1 dB bandwidth of 22 MHz. It features low loss with excellent attenuation, and is designed to be used with a single ended input and output. Pin # SE Description 8 9 3 4 1,2,5,6,7,10 Input Return Input Output Return Output Case Ground The device is RoHS compliant and Pb-free. Ordering Information Part No. Description 855596 855596-EVB packaged part evaluation board Standard T/R size = 2000 units/reel. Data Sheet: Rev - 06/14/11 (c) 2011 TriQuint Semiconductor, Inc. - 1 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855596 320 MHz SAW Filter Specifications Electrical Specifications (1) Specified Temperature Range: (2) +25 C Parameter (3) Center Frequency Minimum Insertion Loss Lower 1dB Band Edge (5) Upper 1dB Band Edge (5) Lower 45dB Band Edge (5) Upper 45dB Band Edge (5) Amplitude Variation Group Delay Variation Group Delay Relative Attenuation (5) Conditions At Center Frequency 309 - 331 MHz 309 - 331 MHz 309 - 331 MHz 235 - 275 MHz 275 - 301 MHz 339 - 395 MHz 395 - 435 MHz Source Impedance (single-ended) (6) Load Impedance (single-ended) (6) Min Typical (4) Max Units 332.2 301.3 41 45 45 41 - 320 19.4 307.9 332.5 302.3 337.4 0.47 32 0.56 49 49 48 54 50 50 24 308.8 338.5 1.0 60 - MHz dB MHz MHz MHz MHz dB p-p ns p-p s dB dB dB dB Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to loss at center frequency 6. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature (7) Storage Temperature -40 to +85 oC -40 to +85 oC 7. Device may operate over this range with degraded Electrical Specifications Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev - 06/14/11 (c) 2011 TriQuint Semiconductor, Inc. - 2 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855596 320 MHz SAW Filter Reference Design - 50 SE Input, 50 SE Output Schematic 33nH 24nH 9 50 Single-ended Input 50 4 2pF 50 Single-ended Output 50 1,2,3,5 6,7,8,10 Notes: 1. Actual matching values may vary due to PCB layout and parasitics PC Board Mounting Configuration 9.19 1.32 1.22 960685 L1 SAWTEK C1 855596 JJJYHH L2 3.76 7.21 2.07 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick 1.22 1.32 1.32 Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer L1 L2 C1 SMA PCB 33 nH 24 nH 2.0 pF N/A N/A Coil Wire-wound,0805, 5% Coil Wire-wound, 0805, 5% Chip Capacitor,0805, 5% SMA connector 3-layer Coillcraft Coilcraft MuRata Radiall USA Inc. multiple Data Sheet: Rev - 06/14/11 (c) 2011 TriQuint Semiconductor, Inc. - 3 of 6 - Part Number 0805CS-330XJLC 0805CS-240XJLC G GRM2166T1H2R0CD01 9602-1111-018 960685 Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855596 320 MHz SAW Filter Typical Performance (at room temperature) Data Sheet: Rev - 06/14/11 (c) 2011 TriQuint Semiconductor, Inc. - 4 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855596 320 MHz SAW Filter Mechanical Information Package Information, Dimensions and Marking Package Style: SMP-35B Dimensions: 9.00 x 7.01 x 1.50 mm SAWTEK 855596 JJJYHH ID dot Date Code All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm 0.76 1.50 NOM. 1.65 MAX. Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) 9.00 2.54 1.80 7.01 2.54 1.12 1.02 x 2.54 1.02 Tape and Reel Information Standard T/R size = 2000 units/reel. All dimensions are in millimeters ID dot 16.8 2.7 O330 0.3 O102 4.0 2.0 O1.5 A 7.5 16.0 9.22 O20.2 O13.0 2.0 Data Sheet: Rev - 06/14/11 (c) 2011 TriQuint Semiconductor, Inc. Direction of travel - 5 of 6 - 2.2 Section A-A 1.75 7.22 12.0 O1.5 A Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855596 320 MHz SAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 0 Value: Test: Standard: This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). Passes 150 V min. Human Body Model (HBM) JEDEC Standard JESD22-A114 This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free ESD Rating: A Value: Passes 150 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: applications.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev - 06/14/11 (c) 2011 TriQuint Semiconductor, Inc. - 6 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R)