855596 - TriQuint Semiconductor

855596

320 MHz SAW Filter

Data Sheet: Rev - 06/14/11

- 1 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Applications

General Purpose

For IF applications

Product Features

Functional Block Diagram

Top view

Typical 1dB Bandwidth of 22 MHz

Low loss

High attenuation

Single-ended operation

Ceramic Surface Mount Package (SMP)

Small Size

Dimensions: 9.0 x 7.0 x 1.5mm

Hermetic RoHS compliant, Pb-free

Gnd Gnd

Gnd

Output return

Output

Input

Input return

Gnd

Gnd Gnd

1 2 3

5

4

876

9

10

General Description

Pin Configuration

The 855596 is a high-performance IF SAW filter with a

center frequency of 320 MHz and a 1 dB bandwidth of 22

MHz.

It features low loss with excellent attenuation, and is

designed to be used with a single ended input and output.

The device is RoHS compliant and Pb-free.

Pin # SE

Description

8

Input Return

9

Input

3

Output Return

4

Output

1,2,5,6,7,10

Case Ground

Ordering Information

Part No.

Description

855596

packaged part

855596-EVB

evaluation board

Standard T/R size = 2000 units/reel.

Pb

855596

320 MHz SAW Filter

Data Sheet: Rev - 06/14/11

- 2 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Specifications

Electrical Specifications (1)

Specified Temperature Range: (2) +25 ºC

Parameter (3)

Conditions

Min

Typical (4)

Max

Units

Center Frequency

-

320

-

MHz

Minimum Insertion Loss

At Center Frequency

-

19.4

24

dB

Lower 1dB Band Edge (5)

Upper 1dB Band Edge (5)

-

332.2

307.9

332.5

308.8

-

MHz

Lower 45dB Band Edge (5)

Upper 45dB Band Edge (5)

301.3

-

302.3

337.4

-

338.5

MHz

Amplitude Variation

309 – 331 MHz

-

0.47

1.0

dB p-p

Group Delay Variation

309 – 331 MHz

-

32

60

ns p-p

Group Delay

309 – 331 MHz

-

0.56

-

µs

Relative Attenuation (5)

235 – 275 MHz

275 – 301 MHz

339 – 395 MHz

395 – 435 MHz

41

45

41

49

48

54

-

dB

Source Impedance (single-ended) (6)

-

50

-

Load Impedance (single-ended) (6)

-

50

-

Notes:

1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3

2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over

temperature

3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances

4. Typical values are based on average measurements at room temperature

5. Relative to loss at center frequency

6. This is the optimum impedance in order to achieve the performance shown

Absolute Maximum Ratings

Parameter

Rating

Operating Temperature (7)

-40 to +85 oC

Storage Temperature

-40 to +85 oC

7. Device may operate over this range with degraded Electrical Specifications

Operation of this device outside the parameter ranges given above may cause permanent damage.

855596

320 MHz SAW Filter

Data Sheet: Rev - 06/14/11

- 3 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Reference Design – 50 SE Input, 50 SE Output

Schematic

50

Single-ended

Input

1,2,3,5

6,7,8,10

50

33nH 9 4 24nH

50

2pF

50

Single-ended

Output

Notes:

1. Actual matching values may vary due to PCB layout and parasitics

PC Board

Mounting Configuration

960685

855596

JJJYHH

SAWTEK

L1 L2

C1

1.22

9.191.32

1.22

3.76

1.32

2.07

7.21

Notes:

Top, middle & bottom layers: 1 oz copper

Substrates: FR4 dielectric, .031” thick

Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick

Hole plating: Copper min .0008µm thick

Notes:

1. All dimensions are in millimeters.

2. This footprint represents a recommendation only.

Bill of Material

Reference Desg.

Value

Description

Manufacturer

Part Number

L1

33 nH

Coil Wire-wound,0805, 5%

Coillcraft

0805CS-330XJLC

L2

24 nH

Coil Wire-wound, 0805, 5%

Coilcraft

0805CS-240XJLC

C1

2.0 pF

Chip Capacitor,0805, 5%

MuRata

G GRM2166T1H2R0CD01

SMA

N/A

SMA connector

Radiall USA Inc.

9602-1111-018

PCB

N/A

3-layer

multiple

960685

855596

320 MHz SAW Filter

Data Sheet: Rev - 06/14/11

- 4 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Typical Performance (at room temperature)

855596

320 MHz SAW Filter

Data Sheet: Rev - 06/14/11

- 5 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Mechanical Information

Package Information, Dimensions and Marking

0.76

9.00

2.54

1.12

1.02

7.01

1.80

1.50 NOM.

1.65 MAX.

1.02 x 2.54

Date Code

ID dot JJJYHH

855596

SAWTEK

Package Style: SMP-35B

Dimensions: 9.00 x 7.01 x 1.50 mm

Body: Al2O3 ceramic

Lid: Kovar, Ni plated

Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni

plating

All dimensions shown are nominal in millimeters

All tolerances are ±0.15mm except overall length and width

±0.10mm

The date code consists of: day of the current year (Julian,

3 digits), last digit of the year (1 digit) and hour (2 digits)

Tape and Reel Information

Standard T/R size = 2000 units/reel. All dimensions are in millimeters

Ø13.0

Ø20.2

Ø102

Ø330

16.8

2.7 ID dot

Direction of travel

2.0

A

Ø1.5

12.0

4.0 Ø1.5

2.0

9.22

7.22

2.2

Section A-A

0.3

16.0

7.5

1.75

855596

320 MHz SAW Filter

Data Sheet: Rev - 06/14/11

- 6 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Product Compliance Information

ESD Information

ESD Rating: 0

Value: Passes 150 V min.

Test: Human Body Model (HBM)

Standard: JEDEC Standard JESD22-A114

ESD Rating: A

Value: Passes 150 V min.

Test: Machine Model (MM)

Standard: JEDEC Standard JESD22-A115

Solderability

Compatible with the latest version of J-STD-020, lead

free solder, 260°C

Refer to Soldering Profile for recommended guidelines.

This part is compliant with EU 2002/95/EC RoHS

directive (Restrictions on the Use of Certain Hazardous

Substances in Electrical and Electronic Equipment).

This product also has the following attributes:

Halogen Free (Chlorine, Bromine)

Antimony Free

TBBP-A (C15H12Br402) Free

PFOS Free

SVHC Free

MSL Rating

Devices are Hermetic, therefore MSL is not applicable.

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations, and information about

TriQuint:

Web: www.triquint.com Tel: +1.407.886.8860

Email: info-sales@tqs.com Fax: +1.407.886.7061

For technical questions and application information:

Email: applications.engineering@tqs.com

Important Notice

The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain

herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint

assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained

herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with

the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest

relevant information before placing orders for TriQuint products. The information contained herein or any use of such

information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property

rights, whether with regard to such information itself or anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining

applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.

Caution! ESD-Sensitive Device