MCC GBL005 THRU GBL10 omponents 20736 Marilla Street Chatsworth !"# $ % !"# TM Micro Commercial Components Features 4.0 Amp Glass Passivated Single-Phase Rectifiers 50 to 1000 Volts Marking : type number x * * * * High case dielectric strength Glass passivated chip junction High surge current capability Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL Rating 1 * Lead Free Finish/RoHS Compliant (NOTE 3)("P" Suffix designates RoHS Compliant. See ordering information) Maximum Ratings * * * O GBL O Operating Temperature: -55 C to +150 C Storage Temperature: -55OC to +150OC UL Recognized File # E165989 Maximum Maximum MCC Recurrent Part Number Peak Reverse RMS Voltage Voltage GBL005 50V 35V GBL01 100V 70V GBL02 200V 140V GBL04 400V 280V GBL06 600V 420V GBL08 800V 560V GBL10 1000V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V Electrical Characteristics @ 25C Unless Otherwise Specified Maximum Average Forward Current Peak Forward Surge Current Rating for fusing Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance GBL005-04 GBL06-10 Typical thermal resistance per leg IF(AV) O (1) IFSM 4.0 A 3.0A 150A I2t 93A2sec VF 1.1V t<8.3ms IFM = 4.0A; TA = 25OC IR 5.0uA 500uA TA = 25OC TA = 125OC CJ 95pF 40pF 22OC/W 3.5OC/W TC = 50 C TA = 40OC(2) 8.3ms, half sine Measured at 1.0MHz, VR=4.0V RJA RJL Note:1.Unit mounted on 3.0x3.0x0.11" thick(7.5x7.5x0.3cm)Al. plate 2. Unit mounted on P.C.B. at 0.375"(9.5mm) lead length and 0.5x0.5"(12x12mm) copper pads DIM A B C D E F G H J K L M N DIMENSIONS INCHES MM MIN MAX MIN MAX 0.125 X 0.125 3.17 X 3.17 .815 .825 20.7 20.9 .411 .421 10.4 10.7 .682 .718 17.3 18.2 .075 .098 1.9 2.5 .189 .209 4.8 5.3 .040 .050 1.02 1.27 .075 .098 1.9 2.5 .080 .095 2.03 2.41 .060 .080 1.05 2.03 .030 .040 0.76 1.02 .018 .022 0.46 0.56 .128 .140 3.25 3.56 NOTE X 45 3. High Temperature Solder Exemption Applied, see EU Directive Annex Notes 7 Revision: 4 www.mccsemi.com 1 of 3 2008/01/30 MCC GBL005 thru GBL10 Micro Commercial Components Fig. 2 -- Maximum Non-Repetitive Peak Forward Surge Current Per Leg 60 Hz Resistive or Inductive Load Heat-Sink Mounting 3.0 x 3.0 x 0.11" Thick (7.5 x 7.5 x 0.3cm) Aluminum Plate 4.0 3.0 2.0 P.C.B. Mounting 0.47 x 0.47" (12 x 12mm) Copper pads with 0.375" (9.5mm) lead length 1.0 Peak Forward Surge Current (A) Average Forward Output Current (A) Fig. 1 -- Derating Curves Output Rectified Current 5.0 0 150 TJ = TJ max. Single Sine-Wave (JEDEC Method) 100 50 1.0 Cycle 0 0 10 1 150 100 50 Fig. 4 -- Typical Reverse Leakage Characteristics Per Leg 100 Instantaneous Reverse Current (A) Instantaneous Forward Current (A) Fig. 3 -- Typical Forward Voltage Characteristics Per Leg 10 1 0.1 TJ = 25C Pulse width = 300s 1% Duty Cycle 0.01 0.4 0.6 1.0 0.8 1.2 1.4 500 100 0.1 TA = 25C 0.01 0 1.6 100 50 -- 400V 600 -- 1000V 100 100 10 1 0.1 0.01 0.1 1 10 100 t, Heating Time (sec.) Reverse Voltage (V) Revision: 4 100 80 60 Fig. 6 -- Typical Transient Thermal Impedance Per Leg Transient Thermal Impedance (C/W) TJ = 25C f = 1.0MHz Vsig = 50mVp-p 10 40 20 Percent of Rated Peak Reverse Voltage (V) 1,000 1 50 -- 400V 600 -- 1000V 1 Fig. 5 -- Typical Junction Capacitance Per Leg 0.1 TA = 125C 10 Instantaneous Forward Voltage (V) 10 100 Number of Cycles at 60Hz Ambient Temperature (C) Junction Capacitance (pF) TM www.mccsemi.com 2 of 3 2008/01/30 MCC TM Micro Commercial Components Ordering Information Device Packing (Part Number)-BP Bulk;20pcs/Tube ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 4 3 of 3 2008/01/30