United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com362
LXG
SNAP MOUNT-105C
LXGSeries
The LXG series capacitors are large capacitance, snap-in capacitors similar to the standard KMH
but have an extended rated lifetime of 5,000 hours at 105C with the rated ripple current applied. The
LXG capacitors are available in 2 or 4-pin snap-in styles and 3 or 4 -pin straight terminals with or
without standoffs.
The standard LXG capacitors are non-solvent proof and are not recommended when halogenated
cleaning solvents are used. Refer to the Mini-Glossary for recommended cleaning conditions.
Snap Mount
Large
Capacitance
5,000 Hours
Extended Life
105C
Maximum
Temperature
PC board 2 or 4-pin snap-in; optional 3 or 4-pin straight terminals.
Capacitance range: 39 to 47,000µF.
Voltage range: 10 to 450VDC.
Operating temperature range: 40Cto
105C for 10 to 100V; 25Cto
105C
for 200 to 400V.
Leakage current: 0.02CV(µA) or 3mA, whichever is smaller, after 5 minutes at
20C.
Standard capacitance tolerance: 20%
Nominal case size (DL): 2225mm to 3550mm.
Rated lifetime: 5,000 hours at
105C with the rated ripple current applied.
Summary of Specifications
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 363
LXG Series
LXG
SNAP MOUNT-105C
LXG Specifications
Item
Operating Temperature Range 40 to
105C for 10 to 100VDC; 25 to
105C for 200 to 400VDC
Rated Voltage Range 10 to 450VDC
Capacitance Range 39 to 47,000F
Capacitance Tolerance 20% (M) at
20C, 120Hz
Leakage Current I 0.02CV (A ) or 3mA, whichever is smaller, after 5 minutes at
20C.
Where I = Leakage current (A), C = Nominal capacitance (F) and V= Rated voltage ( V )
Dissipation Factor (Tan )At
20C, 120Hz
Characteristics
Rated Voltage (V )
Tan (DF)
10
0.60
16
0.45
25
0.30
35
0.25
50
0.20
63- 400
0.15
450
0.20
Low Temperature
Characteristics
At 120Hz, capacitance at the rated minimum operating temperature shall not be less than
70% of the specified value at
20C.
At 120Hz, impedance (Z ) ratio between the 25C or 40C value and
20C value shall not
exceed the values given below.
Rated Voltage (V )
Z(
25C)/Z(
20C)
Z(
40C)/Z(
20C)
10 -16
4
15
25
3
10
35
3
8
50, 63
2
6
80,100
2
5
200- 400
4
–
450
8
–
Ripple Current Multipliers
Refer to Section 4 of the
Mini-Glossary for explanation
of Ripple Current Multipliers.
Ambient Temperature (C)
85C
1.73
105C
1.00
Frequency (Hz )
DC Rated Voltage
10 -50V
63- 100V
200, 250V
350, 400V
50Hz
0.95
0.92
0.81
0.77
120Hz
1.00
1.00
1.00
1.00
300Hz
1.03
1.07
1.17
1.16
1kHz
1.05
1.13
1.32
1.30
10kHz
1.08
1.19
1.45
1.41
50kHz
1.08
1.20
1.50
1.43
Shelf Life
Others
The following specifications shall be satisfied when the capacitors are restored to
20C after
exposing them for 500 hours at
105C without voltage applied. The rated voltage shall be
applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than
48 hours before the measurements.
Capacitance change: ≤20% of initial measured value
Tan (DF) : ≤150% of initial specified value
Leakage current : ≤initial specified value
Satisfies characteristic W of JIS C5141
Load Life The following specifications shall be satisfied when the capacitors are restored to
20C
after subjecting them to the DC rated voltage for 5,000 hours at
105C with the rated ripple
current applied. The sum of DC voltage and peak AC voltage must not exceed the full rated
voltage of the capacitors.
Capacitance change: ≤25% of initial measured value
Tan (DF) : ≤250% of initial specified value
Leakage current : ≤initial specified value
Impedance At
20C, 30kHz, impedance (Z) shall not exceed the values given in the Ratings Tables.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com364
LXG Series
LXG
SNAP MOUNT-105C
Snap Mount
Types VN-T2 & VS-T2 Ø22~Ø35
VN & VS Pin Dimensions
Type VR-T3 Ø30
Type VR-T4 Ø35
VR Pin Dimensions
Unit: mm
Diagram of Dimensions
Type
VR (Standoff Pin)
VR (Straight Pin)
P
3.75
1.0
5.50
1.0
P1
2.0 max.
—
W1
0.7
W
1.50.1
Types VN-T4 Ø35
W2W1
W
PEdge
of can
PVC Sleeve
D301
L2
See
Pin
Detail
15
2-3x
PC board pin-out
45°
AB*
**Vent
PVC Sleeve
L2
See
Pin
Detail
22.5
2-4x
PC board pin-out
30°
A*C*
B
D351
**Vent
W
P
W1
Edge
of can
P1
W
P
W1
Standoff Pin (Standard)*** Straight Pin
PVC Sleeve
D1
L2
**Vent
See
Pin
Detail
10
2-2x
PC board pin-out
A*
PVC Sleeve
L2
See
Pin
Detail
22.5
2-4x
PC board pin-out
30°
C*
B
D351
**Vent
Type
VN-T2 Ø22-Ø35
VN-T4 Ø35
VS -T2 Ø22-Ø30
VS -T2 Ø35
P
5.81.0
5.81.0
4.00.5
3.50.5
W
1.50.2
W1
1.0
W2
1.0
CAUTION:
*Use the blank terminals for mechanical support only. The blank terminals must not be connected to a solder trace on the
PC board, but be electrically isolated from the negative or positive terminal.
**Vent may be located either on the bottom or side of the can.
***Please add an “H” to the end of the part number for standoffs.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 365
LXG Series
LXG
SNAP MOUNT-105C
6,800 LXG10VN682M22X25T2 22 25 0.146 120 1.3
10,000 LXG10VN103M22X30T2 22 30 0.099 100 1.65
12,000 LXG10VN123M22X35T2 22 35 0.083 80 1.85
15,000 LXG10VN153M22X40T2 22 40 0.066 70 2.12
18,000 LXG10VN183M22X50T2 22 50 0.055 50 2.45
10,000 LXG10VN103M25X25T2 25.4 25 0.099 90 1.64
12,000 LXG10VN123M25X30T2 25.4 30 0.083 70 1.85
15,000 LXG10VN153M25X35T2 25.4 35 0.066 60 2.16
18,000 LXG10VN183M25X40T2 25.4 40 0.055 50 2.43
27,000 LXG10VN273M25X50T2 25.4 50 0.037 40 3.11
12,000 LXG10VN123M30X25T2 30 25 0.083 70 1.89
18,000 LXG10VN183M30X30T2 30 30 0.055 50 2.37
22,000 LXG10VN223M30X35T2 30 35 0.045 40 2.73
27,000 LXG10VN273M30X40T2 30 40 0.037 35 3.13
39,000 LXG10VN393M30X50T2 30 50 0.026 25 3.99
18,000 LXG10VN183M35X25T2 35 25 0.055 65 2.42
22,000 LXG10VN223M35X30T2 35 30 0.045 45 2.79
33,000 LXG10VN333M35X35T2 35 35 0.03 38 3.49
39,000 LXG10VN393M35X40T2 35 40 0.026 30 3.96
47,000 LXG10VN473M35X50T2 35 50 0.021 23 4.62
5,600 LXG16VN562M22X25T2 22 25 0.133 120 1.44
6,800 LXG16VN682M22X30T2 22 30 0.11 100 1.66
8,200 LXG16VN822M22X35T2 22 35 0.091 80 1.87
10,000 LXG16VN103M22X40T2 22 40 0.075 70 2.12
15,000 LXG16VN153M22X50T2 22 50 0.05 50 2.74
6,800 LXG16VN682M25X25T2 25.4 25 0.11 90 1.66
10,000 LXG16VN103M25X30T2 25.4 30 0.075 70 2.07
12,000 LXG16VN123M25X35T2 25.4 35 0.062 60 2.37
15,000 LXG16VN153M25X40T2 25.4 40 0.05 50 2.71
18,000 LXG16VN183M25X50T2 25.4 50 0.041 40 3.11
10,000 LXG16VN103M30X25T2 30 25 0.075 70 2.11
12,000 LXG16VN123M30X30T2 30 30 0.062 50 2.37
18,000 LXG16VN183M30X35T2 30 35 0.041 40 3.02
22,000 LXG16VN223M30X40T2 30 40 0.034 35 3.46
27,000 LXG16VN273M30X50T2 30 50 0.028 25 4.07
10 Volts
13 Volts Surge
16 Volts
20 Volts Surge
*The case sizes in table are with no sleeve, refer to diagrams for case sizes with sleeve.
Standard Voltage Ratings - VN/Snap Mount
Rated
Voltage
(WVDC)
Capacitance
(µF)
Catalog
Part Number
Nominal
Case Size*
DL (mm)
Maximum
Ripple Current
(A rms) at
105C, 120Hz
Maximum
Impedance
(mΩ) at
20C, 30kHz
Maximum ESR
(Ω) at
20C,120Hz
Terminal Code: T2 = 2 -Pin Snap-in (Standard).
Case Code: See Case Sizes in Tables.
Capacitance Tolerance: M = 20%
Capacitance Value: Expressed in Microfarads. The first two digits are
significant figures, and the third digit indicates the number of zeros
for capacitance of 100F or more. R indicates the decimal point for
capacitance less than 100F (e.g. R22 = .22F; 2R2 = 2.2F;
22R = 22F; 221= 220F; 222 = 2,200F; 223 = 22,000F).
Lead Configuration: VN or VS = Snap-in Terminals.
VR = Straight Pins with or without Standoffs.
See diagrams for terminal options.
DC Rated Voltage: Expressed in Volts (e.g. 400 = 400WVDC).
Series Name: Indicates Basic Capacitor Design.
Part Numbering System for LXG Series When ordering, always specify complete catalog number for LXG Series.
LXG 400 VN 221 M 25X50 T2
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com366
LXG Series
LXG
SNAP MOUNT-105C
2,200 LXG35VN222M22X25T2 22 25 0.188 120 1.1
3,300 LXG35VN332M22X30T2 22 30 0.126 100 1.42
3,900 LXG35VN392M22X35T2 22 35 0.106 80 1.58
4,700 LXG35VN472M22X40T2 22 40 0.088 70 1.78
6,800 LXG35VN682M22X50T2 22 50 0.061 50 2.26
3,300 LXG35VN332M25X25T2 25.4 25 0.126 90 1.41
3,900 LXG35VN392M25X30T2 25.4 30 0.106 70 1.58
5,600 LXG35VN562M25X35T2 25.4 35 0.074 60 1.98
6,800 LXG35VN682M25X40T2 25.4 40 0.061 50 2.24
8,200 LXG35VN822M25X50T2 25.4 50 0.051 40 2.57
4,700 LXG35VN472M30X25T2 30 25 0.088 70 1.77
5,600 LXG35VN562M30X30T2 30 30 0.074 50 1.98
8,200 LXG35VN822M30X35T2 30 35 0.051 40 2.5
10,000 LXG35VN103M30X40T2 30 40 0.041 35 2.86
12,000 LXG35VN123M30X50T2 30 50 0.035 25 3.32
5,600 LXG35VN562M35X25T2 35 25 0.074 65 2.03
8,200 LXG35VN822M35X30T2 35 30 0.051 45 2.55
10,000 LXG35VN103M35X35T2 35 35 0.041 38 2.88
12,000 LXG35VN123M35X40T2 35 40 0.035 30 3.3
18,000 LXG35VN183M35X50T2 35 50 0.023 23 4.29
35 Volts
44 Volts Surge
*The case sizes in table are with no sleeve, refer to diagrams for case sizes with sleeve.
Standard Voltage Ratings - VN/Snap Mount
Rated
Voltage
(WVDC)
Capacitance
(µF)
Catalog
Part Number
Nominal
Case Size*
DL (mm)
Maximum
Ripple Current
(A rms) at
105C, 120Hz
Maximum
Impedance
(m
Ω) at
20C, 30kHz
Maximum ESR
(Ω) at
20C,120Hz
3,900 LXG25VN392M22X25T2 22 25 0.128 120 1.31
4,700 LXG25VN472M22X30T2 22 30 0.106 100 1.51
5,600 LXG25VN562M22X35T2 22 35 0.089 80 1.7
6,800 LXG25VN682M22X40T2 22 40 0.073 70 1.92
10,000 LXG25VN103M22X50T2 22 50 0.05 50 2.45
4,700 LXG25VN472M25X25T2 25.4 25 0.106 90 1.51
6,800 LXG25VN682M25X30T2 25.4 30 0.073 70 1.87
8,200 LXG25VN822M25X35T2 25.4 35 0.061 60 2.14
10,000 LXG25VN103M25X40T2 25.4 40 0.05 50 2.43
12,000 LXG25VN123M25X50T2 25.4 50 0.041 40 2.78
6,800 LXG25VN682M30X25T2 30 25 0.073 70 1.9
8,200 LXG25VN822M30X30T2 30 30 0.061 50 2.15
12,000 LXG25VN123M30X35T2 30 35 0.041 40 2.7
15,000 LXG25VN153M30X40T2 30 40 0.033 35 3.13
18,000 LXG25VN183M30X50T2 30 50 0.028 25 3.64
8,200 LXG25VN822M35X25T2 35 25 0.061 65 2.19
12,000 LXG25VN123M35X30T2 35 30 0.041 45 2.76
15,000 LXG25VN153M35X35T2 35 35 0.033 38 3.16
18,000 LXG25VN183M35X40T2 35 40 0.028 30 3.61
27,000 LXG25VN273M35X50T2 35 50 0.018 23 4.7
25 Volts
32 Volts Surge
12,000 LXG16VN123M35X25T2 35 25 0.062 65 2.42
18,000 LXG16VN183M35X30T2 35 30 0.041 45 3.09
22,000 LXG16VN223M35X35T2 35 35 0.034 38 3.49
27,000 LXG16VN273M35X40T2 35 40 0.028 30 4.04
39,000 LXG16VN393M35X50T2 35 50 0.019 23 5.16
16 Volts
20 Volts Surge
1,500 LXG50VN152M22X25T2 22 25 0.221 120 1.02
1,800 LXG50VN182M22X30T2 22 30 0.184 100 1.17
2,200 LXG50VN222M22X35T2 22 35 0.151 80 1.33
2,700 LXG50VN272M22X40T2 22 40 0.123 70 1.51
3,900 LXG50VN392M22X50T2 22 50 0.085 50 1.91
1,800 LXG50VN182M25X25T2 25.4 25 0.184 90 1.17
2,700 LXG50VN272M25X30T2 25.4 30 0.123 70 1.47
3,300 LXG50VN332M25X35T2 25.4 35 0.10 60 1.7
3,900 LXG50VN392M25X40T2 25.4 40 0.085 50 1.89
5,600 LXG50VN562M25X50T2 25.4 50 0.059 40 2.38
50 Volts
63 Volts Surge
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 367
LXG Series
LXG
SNAP MOUNT-105C
*The case sizes in table are with no sleeve, refer to diagrams for case sizes with sleeve.
Standard Voltage Ratings - VN/Snap Mount
Rated
Voltage
(WVDC)
Capacitance
(µF)
Catalog
Part Number
Nominal
Case Size*
DL (mm)
Maximum
Ripple Current
(A rms) at
105C, 120Hz
Maximum
Impedance
(m
Ω) at
20C, 30kHz
Maximum ESR
(Ω) at
20C,120Hz
2,700 LXG50VN272M30X25T2 30 25 0.123 70 1.5
3,300 LXG50VN332M30X30T2 30 30 0.10 50 1.7
4,700 LXG50VN472M30X35T2 30 35 0.071 40 2.11
5,600 LXG50VN562M30X40T2 30 40 0.059 35 2.39
6,800 LXG50VN682M30X50T2 30 50 0.049 25 2.79
3,300 LXG50VN332M35X25T2 35 25 0.10 65 1.74
4,700 LXG50VN472M35X30T2 35 30 0.071 45 2.16
5,600 LXG50VN562M35X35T2 35 35 0.059 38 2.41
6,800 LXG50VN682M35X40T2 35 40 0.049 30 2.78
10,000 LXG50VN103M35X50T2 35 50 0.033 23 3.57
50 Volts
63 Volts Surge
1,000 LXG63VN102M22X25T2 22 25 0.249 120 1.0
1,200 LXG63VN122M22X30T2 22 30 0.207 100 1.15
1,500 LXG63VN152M22X35T2 22 35 0.166 80 1.32
1,800 LXG63VN182M22X40T2 22 40 0.138 70 1.49
2,700 LXG63VN272M22X50T2 22 50 0.092 50 1.92
1,200 LXG63VN122M25X25T2 25.4 25 0.207 90 1.15
1,800 LXG63VN182M25X30T2 25.4 30 0.138 70 1.45
2,200 LXG63VN222M25X35T2 25.4 35 0.113 60 1.67
2,700 LXG63VN272M25X40T2 25.4 40 0.092 50 1.9
3,300 LXG63VN332M25X50T2 25.4 50 0.075 40 2.2
1,800 LXG63VN182M30X25T2 30 25 0.138 70 1.48
2,200 LXG63VN222M30X30T2 30 30 0.113 50 1.68
2,700 LXG63VN272M30X35T2 30 35 0.092 40 1.93
3,900 LXG63VN392M30X40T2 30 40 0.064 35 2.41
4,700 LXG63VN472M30X50T2 30 50 0.053 25 2.8
2,200 LXG63VN222M35X25T2 35 25 0.113 65 1.71
3,300 LXG63VN332M35X30T2 35 30 0.075 25 2.18
3,900 LXG63VN392M35X35T2 35 35 0.064 38 2.43
4,700 LXG63VN472M35X40T2 35 40 0.053 30 2.78
6,800 LXG63VN682M35X50T2 35 50 0.037 23 3.55
63 Volts
79 Volts Surge
680 LXG80VN681M22X25T2 22 25 0.366 150 0.97
820 LXG80VN821M22X30T2 22 30 0.303 120 1.12
1,000 LXG80VN102M22X35T2 22 35 0.249 95 1.27
1,200 LXG80VN122M22X40T2 22 40 0.207 80 1.42
1,800 LXG80VN182M22X50T2 22 50 0.138 60 1.84
1,000 LXG80VN102M25X25T2 25.4 25 0.249 110 1.23
1,200 LXG80VN122M25X30T2 25.4 30 0.207 85 1.39
1,500 LXG80VN152M25X35T2 25.4 35 0.166 70 1.62
1,800 LXG80VN182M25X40T2 25.4 40 0.138 60 1.82
2,200 LXG80VN222M25X50T2 25.4 50 0.113 45 2.11
1,200 LXG80VN122M30X25T2 30 25 0.207 80 1.41
1,800 LXG80VN182M30X30T2 30 30 0.138 60 1.78
2,200 LXG80VN222M30X35T2 30 35 0.113 50 2.05
2,700 LXG80VN272M30X40T2 30 40 0.092 40 2.35
3,300 LXG80VN332M30X50T2 30 50 0.075 30 2.75
1,800 LXG80VN182M35X25T2 35 25 0.138 70 1.82
2,200 LXG80VN222M35X30T2 35 30 0.113 50 2.09
2,700 LXG80VN272M35X35T2 35 35 0.092 40 2.37
3,300 LXG80VN332M35X40T2 35 40 0.075 30 2.73
4,700 LXG80VN472M35X50T2 35 50 0.053 25 3.46
80 Volts
100 Volts Surge
390 LXG100VN391M22X25T2 22 25 0.638 150 0.78
560 LXG100VN561M22X30T2 22 30 0.444 120 0.99
680 LXG100VN681M22X35T2 22 35 0.366 95 1.12
820 LXG100VN821M22X40T2 22 40 0.303 80 1.26
1,200 LXG100VN122M22X50T2 22 50 0.207 60 1.6
100 Volts
125 Volts Surge
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com368
LXG Series
LXG
SNAP MOUNT-105C
*The case sizes in table are with no sleeve, refer to diagrams for case sizes with sleeve.
Standard Voltage Ratings - VN/Snap Mount
Rated
Voltage
(WVDC)
Capacitance
(µF)
Catalog
Part Number
Nominal
Case Size*
DL (mm)
Maximum
Ripple Current
(A rms) at
105C, 120Hz
Maximum
Impedance
(m
Ω) at
20C, 30kHz
Maximum ESR
(Ω) at
20C,120Hz
560 LXG100VN561M25X25T2 25.4 25 0.444 110 0.98
820 LXG100VN821M25X30T2 25.4 30 0.303 85 1.23
1,000 LXG100VN102M25X35T2 25.4 35 0.249 70 1.41
1,200 LXG100VN122M25X40T2 25.4 40 0.207 60 1.59
1,500 LXG100VN152M25X50T2 25.4 50 0.166 45 1.86
820 LXG100VN821M30X25T2 30 25 0.303 80 1.25
1,000 LXG100VN102M30X30T2 30 30 0.249 60 1.42
1,200 LXG100VN122M30X35T2 30 35 0.207 50 1.61
1,500 LXG100VN152M30X40T2 30 40 0.166 40 1.87
2,200 LXG100VN222M30X50T2 30 50 0.113 30 2.4
1,000 LXG100VN102M35X25T2 35 25 0.249 70 1.45
1,500 LXG100VN152M35X30T2 35 30 0.166 50 1.85
1,800 LXG100VN182M35X35T2 35 35 0.138 40 2.07
2,200 LXG100VN222M35X40T2 35 40 0.113 30 2.39
2,700 LXG100VN272M35X50T2 35 50 0.092 25 2.81
100 Volts
125 Volts Surge
180 LXG200VN181M22X25T2 22 25 1.381 640 0.63
270 LXG200VN271M22X30T2 22 30 0.921 560 0.81
330 LXG200VN331M22X35T2 22 35 0.753 450 0.92
390 LXG200VN391M22X40T2 22 40 0.638 400 1.02
470 LXG200VN471M22X50T2 22 50 0.529 320 1.17
270 LXG200VN271M25X25T2 25.4 25 0.921 530 0.81
330 LXG200VN331M25X30T2 25.4 30 0.753 420 0.92
470 LXG200VN471M25X35T2 25.4 35 0.529 360 1.15
560 LXG200VN561M25X40T2 25.4 40 0.444 310 1.28
680 LXG200VN681M25X50T2 25.4 50 0.366 240 1.48
330 LXG200VN331M30X25T2 30 25 0.753 400 0.94
470 LXG200VN471M30X30T2 30 30 0.529 320 1.15
560 LXG200VN561M30X35T2 30 35 0.444 260 1.3
680 LXG200VN681M30X40T2 30 40 0.366 240 1.49
1,000 LXG200VN102M30X50T2 30 50 0.249 180 1.91
470 LXG200VN471M35X25T2 35 25 0.529 340 1.22
680 LXG200VN681M35X30T2 35 30 0.366 260 1.47
820 LXG200VN821M35X35T2 35 35 0.303 210 1.65
1,000 LXG200VN102M35X40T2 35 40 0.249 180 1.9
1,200 LXG200VN122M35X50T2 35 50 0.207 140 2.21
200 Volts
250 Volts Surge
150 LXG250VN151M22X25T2 22 25 1.658 640 0.57
180 LXG250VN181M22X30T2 22 30 1.381 560 0.66
220 LXG250VN221M22X35T2 22 35 1.13 450 0.75
270 LXG250VN271M22X40T2 22 40 0.921 400 0.85
390 LXG250VN391M22X50T2 22 50 0.638 320 1.08
180 LXG250VN181M25X25T2 25.4 25 1.381 530 0.66
270 LXG250VN271M25X30T2 25.4 30 0.921 420 0.83
330 LXG250VN331M25X35T2 25.4 35 0.753 360 0.96
390 LXG250VN391M25X40T2 25.4 40 0.638 310 1.07
470 LXG250VN471M25X50T2 25.4 50 0.529 240 1.22
270 LXG250VN271M30X25T2 30 25 0.921 400 0.85
330 LXG250VN331M30X30T2 30 30 0.753 320 0.96
470 LXG250VN471M30X35T2 30 35 0.529 260 1.19
560 LXG250VN561M30X40T2 30 40 0.444 240 1.35
680 LXG250VN681M30X50T2 30 50 0.366 180 1.58
330 LXG250VN331M35X25T2 35 25 0.753 340 1.02
470 LXG250VN471M35X30T2 35 30 0.529 260 1.22
560 LXG250VN561M35X35T2 35 35 0.444 210 1.36
680 LXG250VN681M35X40T2 35 40 0.366 180 1.57
1,000 LXG250VN102M35X50T2 35 50 0.249 140 2.02
250 Volts
300 Volts Surge
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 369
LXG Series
LXG
SNAP MOUNT-105C
Standard Voltage Ratings - VN/Snap Mount
*The case sizes in table are with no sleeve, refer to diagrams for case sizes with sleeve.
Rated
Voltage
(WVDC)
Capacitance
(µF)
Catalog
Part Number
Nominal
Case Size*
DL (mm)
Maximum
Ripple Current
(A rms) at
105C, 120Hz
Maximum
Impedance
(m
Ω) at
20C, 30kHz
Maximum ESR
(Ω) at
20C,120Hz
56 LXG400VN56RM22X25T2 22 25 4.44 800 0.34
68 LXG400VN68RM22X30T2 22 30 3.656 700 0.44
82 LXG400VN82RM22X35T2 22 35 3.032 560 0.5
120 LXG400VN121M22X40T2 22 40 2.072 500 0.57
150 LXG400VN151M22X50T2 22 50 1.658 390 0.67
68 LXG400VN68RM25X25T2 25.4 25 3.656 660 0.4
100 LXG400VN101M25X30T2 25.4 30 2.486 520 0.5
120 LXG400VN121M25X35T2 25.4 35 2.072 440 0.58
150 LXG400VN151M25X40T2 25.4 40 1.658 380 0.66
220 LXG400VN221M25X50T2 25.4 50 1.13 300 0.84
100 LXG400VN101M30X25T2 30 25 2.486 500 0.51
150 LXG400VN151M30X30T2 30 30 1.658 400 0.65
180 LXG400VN181M30X35T2 30 35 1.381 320 0.74
220 LXG400VN221M30X40T2 30 40 1.13 290 0.84
270 LXG400VN271M30X50T2 30 50 0.921 220 1.1
120 LXG400VN121M35X25T2 35 25 2.072 420 0.61
180 LXG400VN181M35X30T2 35 30 1.381 320 0.83
220 LXG400VN221M35X35T2 35 35 1.13 260 0.94
270 LXG400VN271M35X40T2 35 40 0.921 220 1.09
390 LXG400VN391M35X50T2 35 50 0.638 170 1.26
400 Volts
450 Volts Surge
39 LXG450VN39RM22X25T2 22 25 8.5 1,000 0.37
47 LXG450VN47RM22X30T2 22 30 7.05 900 0.41
56 LXG450VN56RM22X30T2 22 30 5.92 900 0.44
68 LXG450VN68RM22X35T2 22 35 4.875 720 0.5
82 LXG450VN82RM22X40T2 22 40 4.043 650 0.56
100 LXG450VN101M22X45T2 22 45 3.315 600 0.64
120 LXG450VN121M22X50T2 22 50 2.762 500 0.72
56 LXG450VN56RM25X25T2 25.4 25 5.92 850 0.47
68 LXG450VN68RM25X30T2 25.4 30 4.875 670 0.53
82 LXG450VN82RM25X30T2 25.4 30 4.043 670 0.55
100 LXG450VN101M25X35T2 25.4 35 3.315 570 0.63
120 LXG450VN121M25X40T2 25.4 40 2.762 490 0.71
150 LXG450VN151M25X45T2 25.4 45 2.21 450 0.81
180 LXG450VN181M25X50T2 25.4 50 1.842 390 0.91
82 LXG450VN82RM30X25T2 30 25 4.043 650 0.57
100 LXG450VN101M30X30T2 30 30 3.315 520 0.64
450 Volts
500 Volts Surge
68 LXG350VN68RM22X25T2 22 25 3.656 800 0.39
82 LXG350VN82RM22X30T2 22 30 3.032 700 0.49
100 LXG350VN101M22X35T2 22 35 2.486 560 0.55
120 LXG350VN121M22X40T2 22 40 2.072 500 0.63
180 LXG350VN181M22X50T2 22 50 1.381 390 0.73
100 LXG350VN101M25X25T2 25.4 25 2.486 660 0.49
120 LXG350VN121M25X30T2 25.4 30 2.072 520 0.55
150 LXG350VN151M25X35T2 25.4 35 1.658 440 0.6
180 LXG350VN181M25X40T2 25.4 40 1.381 380 0.72
220 LXG350VN221M25X50T2 25.4 50 1.13 300 0.93
120 LXG350VN121M30X25T2 30 25 2.072 500 0.56
180 LXG350VN181M30X30T2 30 30 1.381 400 0.71
220 LXG350VN221M30X35T2 30 35 1.13 320 0.82
270 LXG350VN271M30X40T2 30 40 0.921 290 0.94
330 LXG350VN331M30X50T2 30 50 0.753 220 1.19
150 LXG350VN151M35X25T2 35 25 1.658 420 0.69
220 LXG350VN221M35X30T2 35 30 1.13 320 0.83
270 LXG350VN271M35X35T2 35 35 0.921 260 1.04
330 LXG350VN331M35X40T2 35 40 0.753 220 1.19
470 LXG350VN471M35X50T2 35 50 0.529 170 1.38
350 Volts
400 Volts Surge
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com370
LXG Series
LXG
SNAP MOUNT-105C
120 LXG450VN121M30X30T2 30 30 2.762 520 0.71
150 LXG450VN151M30X35T2 30 35 2.21 410 0.81
180 LXG450VN181M30X40T2 30 40 1.842 290 0.92
220 LXG450VN221M30X45T2 30 45 1.507 260 1.05
120 LXG450VN121M35X25T2 35 25 2.762 540 0.71
150 LXG450VN151M35X30T2 35 30 2.21 410 0.83
180 LXG450VN181M35X35T2 35 35 1.842 330 0.93
220 LXG450VN221M35X40T2 35 40 1.507 280 1.07
270 LXG450VN271M35X45T2 35 45 1.228 230 1.22
330 LXG450VN331M35X50T2 35 50 1.005 170 1.39
450 Volts
500 Volts Surge
Standard Voltage Ratings - VN/Snap Mount
Rated
Voltage
(WVDC)
Capacitance
(µF)
Catalog
Part Number
Nominal
Case Size*
DL (mm)
Maximum
Ripple Current
(A rms) at
105C, 120Hz
Maximum
Impedance
(m
Ω) at
20C, 30kHz
Maximum ESR
(Ω) at
20C,120Hz
*The case sizes in table are with no sleeve, refer to diagrams for case sizes with sleeve.
