QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 1Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Multilayer Ceramic Capacitors
for RF Power Applications
FEATURES
• Case size 0505, 1111, 2525, and 3838
• Ultra-stable, high Q dielectric material
• Lead (Pb)-free terminations code “X”
• Tin / lead termination code “L”
• Non-magnetic copper termination code “C”
• Reliable Noble Metal Electrode (NME) system
• High frequency
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
APPLICATIONS
• MRI coils and generators
• RF instruments
• Lasers, CATV, UHF / microwave RF power amplifiers
• Filter networks, timing circuits
• Mixers, oscillators impedance matching networks
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at 25 °C unless otherwise specified
Operating Temperature:
full range: -55 °C to +125 °C
Capacitance Range:
0505: 0.1 pF to 1000 pF
1111: 0.2 pF to 5100 pF
2525: 1.0 pF to 3000 pF
3838: 1.0 pF to 12 nF
Voltage Rating:
0505: 50 VDC to 250 VDC
1111: 50 VDC to 1500 VDC
2525: 300 VDC to 3600 VDC
3838: 300 VDC to 7200 VDC
Temperature Coefficient of Capacitance (TCC):
C0G (D): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C with
zero (0) VDC applied
Dissipation Factor (DF):
C0G (D): 0.05 % max. at 1.0 VRMS and 1 MHz
for values ≤ 1000 pF
C0G (D): 0.05 % max. at 1.0 VRMS and 1 kHz
for values > 1000 pF
Aging Rate: 0 % maximum per decade
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 MΩ minimum or
1000 ΩF, whichever is less
at +125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E.
Applied test voltages:
≤ 250 VDC-rated: min. 250 % of rated voltage
300 VDC-rated: min. 150 % of rated voltage
630 VDC- to 1000 VDC-rated: 150 % of rated voltage
1500 VDC and up: 120 % rated voltage
Available
Available
Available
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 2Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• For values below 0.4 pF and tolerance ± 0.05 pF, contact mlccrf@vishay.com
Detail ratings see “Selection Chart”
Note
(1) DC voltage rating should not be exceeded in application
Note
(1) For copper terminations add 0.01 mm to maximum termination pad
QUICK REFERENCE DATA
DIELECTRIC CASE MAXIMUM VOLTAGE
(V)
CAPACITANCE
MINIMUM MAXIMUM
D = NP0
0505 250 0.1 pF 1000 pF
1111 1500 0.2 pF 5100 pF
2525 3600 1.0 pF 3000 pF
3838 7200 1.0 pF 12 nF
ORDERING INFORMATION
VJ0505 D 1R0 B X C A C
CASE
CODE
DIELECTRIC CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION DC VOLTAGE
RATING (1) MARKING PACKAGING
0505
1111
2525
3838
D = HIFREQ Expressed in
picofarads (pF).
The first two digits
are significant, the
third is a multiplier.
An “R” indicates a
decimal point.
Examples:
1R0 = 1.0 pF
V = ± 0.05 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
F = ± 1 %
G = ± 2 %
J = ± 5 %
K = ± 10 %
M = ± 20 %
Note
Details see
“Selection
Chart”
C = non-magnetic
copper barrier
100 % tin plate
matte finish
X = Ni barrier
100 % tin plate
matte finish
L = Ni barrier
with tin lead
plated finish
min. 4 % lead
A = 50 V
B = 100 V
K = 150 V
C = 200 V
P = 250 V
D = 300 V
E = 500 V
L = 630 V
I = 800 V
G = 1000 V
R = 1500 V
F = 2000 V
O = 2500 V
H = 3000 V
W = 3600 V
M = 5000 V
S = 7200 V
A = no
marking
M = marking
(EIA)
Q = marking
(non EIA)
T = 7" reel / plastic tape
J = 7" reel (low quantity)
R = 11 1/4" / 13" reel /
plastic tape
W = waffle pack
ENVIRONMENTAL STATUS
TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN
X Ni barrier 100 % tin plated matte finish Yes Yes
L Ni barrier with tin lead plated finish min. 4 % lead No No
C Cu barrier 100 % tin plated matte finish (non-magnetic) Yes Yes
DIMENSIONS in inches (millimeters)
CASE
CODE STYLE LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS (T)
TERMINATIONS PAD (P)
MINIMUM MAXIMUM (1)
0505 VJ0505 0.055 + 0.015 / - 0.010
(1.40 + 0.382 / - 0.254)
0.055 ± 0.015
(1.40 ± 0.38)
0.057
(1.45)
0.004
(0.10)
0.016
(0.41)
1111 VJ1111 0.117 + 0.015 / - 0.010
(2.98 + 0.382 / - 0.254)
0.110 + 0.015 / - 0.020
(2.79 + 0.382 / - 0.509)
0.102
(2.59)
0.012
(0.30)
0.018
(0.46)
2525 VJ2525 0.250 + 0.020 / - 0.025
(6.35 + 0.508 / - 0.63)
0.250 ± 0.015
(6.35 ± 0.381)
0.102
(2.59)
0.010
(0.25)
0.030
(0.76)
3838 VJ3838 0.381 ± 0.015
(9.7 ± 0.40)
0.381 + 0.017 / - 0.015
(9.7 + 0.45 / - 0.40)
0.118
(3.00)
0.010
(0.25)
0.030
(0.76)
LW
T
MAX.
P
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 3Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SELECTION CHART
DIELECTRIC (VISHAY CODE) C0G (D)
STYLE VJ0505
CASE CODE 0505
VOLTAGE (VDC) 50 100 150 200 250
TOLERANCEVOLTAGE CODE A B K C P
CAP. CODE CAP.
0R1 0.1 pF ••••• V, B, C, D
0R2 0.2 pF ••••• V, B, C, D
0R3 0.3 pF ••••• V, B, C, D
0R4 0.4 pF ••••• V, B, C, D
0R5 0.5 pF ••••• V, B, C, D
0R6 0.6 pF ••••• V, B, C, D
0R7 0.7 pF ••••• V, B, C, D
0R8 0.8 pF ••••• V, B, C, D
0R9 0.9 pF ••••• V, B, C, D
1R0 1.0 pF ••••• V, B, C, D
1R1 1.1 pF ••••• V, B, C, D
1R2 1.2 pF ••••• V, B, C, D
1R3 1.3 pF ••••• V, B, C, D
1R4 1.4 pF ••••• V, B, C, D
1R5 1.5 pF ••••• V, B, C, D
1R6 1.6 pF ••••• V, B, C, D
1R7 1.7 pF ••••• V, B, C, D
1R8 1.8 pF ••••• V, B, C, D
1R9 1.9 pF ••••• V, B, C, D
2R0 2.0 pF ••••• V, B, C, D
2R1 2.1 pF ••••• V, B, C, D
2R2 2.2 pF ••••• V, B, C, D
2R4 2.4 pF ••••• V, B, C, D
2R7 2.7 pF ••••• V, B, C, D
3R0 3.0 pF ••••• V, B, C, D
3R3 3.3 pF ••••• V, B, C, D
3R6 3.6 pF ••••• V, B, C, D
3R9 3.9 pF ••••• V, B, C, D
4R3 4.3 pF ••••• V, B, C, D
4R7 4.7 pF ••••• V, B, C, D
5R1 5.1 pF ••••• V, B, C, D
5R6 5.6 pF ••••• B, C, D
6R2 6.2 pF ••••• B, C, D
6R8 6.8 pF ••••• B, C, D
7R5 7.5 pF ••••• B, C, D
8R2 8.2 pF ••••• B, C, D
9R1 9.1 pF ••••• B, C, D
100 10 pF ••••• F, G, J, K, M
110 11 pF ••••• F, G, J, K, M
120 12 pF ••••• F, G, J, K, M
130 13 pF ••••• F, G, J, K, M
150 15 pF ••••• F, G, J, K, M
160 16 pF ••••• F, G, J, K, M
180 18 pF ••••• F, G, J, K, M
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 4Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200 20 pF ••••• F, G, J, K, M
220 22 pF ••••• F, G, J, K, M
240 24 pF ••••• F, G, J, K, M
270 27 pF ••••• F, G, J, K, M
300 30 pF ••••• F, G, J, K, M
330 33 pF ••••• F, G, J, K, M
360 36 pF ••••• F, G, J, K, M
390 39 pF ••••• F, G, J, K, M
430 43 pF ••••• F, G, J, K, M
470 47 pF ••••• F, G, J, K, M
510 51 pF ••••• F, G, J, K, M
560 56 pF ••••• F, G, J, K, M
620 62 pF ••••• F, G, J, K, M
680 68 pF ••••• F, G, J, K, M
750 75 pF •••• F, G, J, K, M
820 82 pF •••• F, G, J, K, M
910 91 pF •••• F, G, J, K, M
101 100 pF •••• F, G, J, K, M
111 110 pF •••• F, G, J, K, M
121 120 pF •••• F, G, J, K, M
131 130 pF •••• F, G, J, K, M
151 150 pF •••• F, G, J, K, M
161 160 pF •••• F, G, J, K, M
181 180 pF •••• F, G, J, K, M
201 200 pF •••• F, G, J, K, M
221 220 pF •••• F, G, J, K, M
241 240 pF •••• F, G, J, K, M
271 270 pF ••• F, G, J, K, M
301 300 pF ••• F, G, J, K, M
331 330 pF ••• F, G, J, K, M
361 360 pF ••• F, G, J, K, M
391 390 pF ••• F, G, J, K, M
431 430 pF ••• F, G, J, K, M
471 470 pF ••• F, G, J, K, M
511 510 pF •F, G, J, K, M
561 560 pF •F, G, J, K, M
621 620 pF •F, G, J, K, M
681 680 pF •F, G, J, K, M
751 750 pF •F, G, J, K, M
821 820 pF •F, G, J, K, M
911 910 pF •F, G, J, K, M
102 1000 pF •F, G, J, K, M
112 1100 pF
122 1200 pF
SELECTION CHART
DIELECTRIC (VISHAY CODE) C0G (D)
STYLE VJ0505
CASE CODE 0505
VOLTAGE (VDC) 50 100 150 200 250
TOLERANCEVOLTAGE CODE A B K C P
CAP. CODE CAP.
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 5Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SELECTION CHART
DIELECTRIC (VISHAY CODE) C0G (D)
STYLE VJ1111
CASE CODE 1111
VOLTAGE (VDC) 50 100 200 300 500 630 1000 1500
TOLERANCEVOLTAGE CODE A B C D E L G R
CAP. CODE CAP.
0R2 0.2 pF •••••••• V, B, C, D
0R3 0.3 pF •••••••• V, B, C, D
0R4 0.4 pF •••••••• V, B, C, D
0R5 0.5 pF •••••••• V, B, C, D
0R6 0.6 pF •••••••• V, B, C, D
0R7 0.7 pF •••••••• V, B, C, D
0R8 0.8 pF •••••••• V, B, C, D
0R9 0.9 pF •••••••• V, B, C, D
1R0 1.0 pF •••••••• V, B, C, D
1R1 1.1 pF •••••••• V, B, C, D
1R2 1.2 pF •••••••• V, B, C, D
1R3 1.3 pF •••••••• V, B, C, D
1R4 1.4 pF •••••••• V, B, C, D
1R5 1.5 pF •••••••• V, B, C, D
1R6 1.6 pF •••••••• V, B, C, D
1R7 1.7 pF •••••••• V, B, C, D
1R8 1.8 pF •••••••• V, B, C, D
1R9 1.9 pF •••••••• V, B, C, D
2R0 2.0 pF •••••••• V, B, C, D
2R1 2.1 pF •••••••• V, B, C, D
2R2 2.2 pF •••••••• V, B, C, D
2R4 2.4 pF •••••••• V, B, C, D
2R7 2.7 pF •••••••• V, B, C, D
3R0 3.0 pF •••••••• V, B, C, D
3R3 3.3 pF •••••••• V, B, C, D
3R6 3.6 pF •••••••• V, B, C, D
3R9 3.9 pF •••••••• V, B, C, D
4R3 4.3 pF •••••••• V, B, C, D
4R7 4.7 pF •••••••• V, B, C, D
5R1 5.1 pF •••••••• V, B, C, D
5R6 5.6 pF •••••••• B, C, D
6R2 6.2 pF •••••••• B, C, D
6R8 6.8 pF •••••••• B, C, D
7R5 7.5 pF •••••••• B, C, D
8R2 8.2 pF •••••••• B, C, D
9R1 9.1 pF •••••••• B, C, D
100 10 pF •••••••• F, G, J, K, M
110 11 pF •••••••• F, G, J, K, M
120 12 pF •••••••• F, G, J, K, M
130 13 pF •••••••• F, G, J, K, M
150 15 pF •••••••• F, G, J, K, M
160 16 pF •••••••• F, G, J, K, M
180 18 pF •••••••• F, G, J, K, M
200 20 pF •••••••• F, G, J, K, M
220 22 pF •••••••• F, G, J, K, M
240 24 pF •••••••• F, G, J, K, M
270 27 pF •••••••• F, G, J, K, M
300 30 pF •••••••• F, G, J, K, M
330 33 pF •••••••• F, G, J, K, M
360 36 pF •••••••• F, G, J, K, M
390 39 pF •••••••• F, G, J, K, M
430 43 pF •••••••• F, G, J, K, M
470 47 pF •••••••• F, G, J, K, M
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 6Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
510 51 pF •••••••• F, G, J, K, M
560 56 pF •••••••• F, G, J, K, M
620 62 pF •••••••• F, G, J, K, M
680 68 pF •••••••• F, G, J, K, M
750 75 pF •••••••• F, G, J, K, M
820 82 pF •••••••• F, G, J, K, M
910 91 pF •••••••• F, G, J, K, M
101 100 pF •••••••• F, G, J, K, M
111 110 pF •••••••• F, G, J, K, M
121 120 pF ••••••• F, G, J, K, M
131 130 pF ••••••• F, G, J, K, M
151 150 pF ••••••• F, G, J, K, M
161 160 pF ••••••• F, G, J, K, M
181 180 pF ••••••• F, G, J, K, M
201 200 pF ••••••• F, G, J, K, M
221 220 pF •••••• F, G, J, K, M
241 240 pF •••••• F, G, J, K, M
271 270 pF •••••• F, G, J, K, M
301 300 pF •••••• F, G, J, K, M
331 330 pF •••••• F, G, J, K, M
361 360 pF •••••• F, G, J, K, M
391 390 pF •••••• F, G, J, K, M
431 430 pF •••••• F, G, J, K, M
471 470 pF •••••• F, G, J, K, M
511 510 pF •••• F, G, J, K, M
561 560 pF •••• F, G, J, K, M
621 620 pF •••• F, G, J, K, M
681 680 pF •••• F, G, J, K, M
751 750 pF •••• F, G, J, K, M
821 820 pF •••• F, G, J, K, M
911 910 pF •••• F, G, J, K, M
102 1000 pF •••• F, G, J, K, M
112 1100 pF ••• F, G, J, K, M
122 1200 pF ••• F, G, J, K, M
132 1300 pF ••• F, G, J, K, M
152 1500 pF ••• F, G, J, K, M
162 1600 pF ••• F, G, J, K, M
182 1800 pF • • F, G, J, K, M
202 2000 pF • • F, G, J, K, M
222 2200 pF • • F, G, J, K, M
242 2400 pF • • F, G, J, K, M
272 2700 pF • • F, G, J, K, M
302 3000 pF • • F, G, J, K, M
332 3300 pF • • F, G, J, K, M
362 3600 pF •F, G, J, K, M
392 3900 pF •F, G, J, K, M
432 4300 pF •F, G, J, K, M
472 4700 pF •F, G, J, K, M
512 5100 pF •F, G, J, K, M
SELECTION CHART
DIELECTRIC (VISHAY CODE) C0G (D)
STYLE VJ1111
CASE CODE 1111
VOLTAGE (VDC) 50 100 200 300 500 630 1000 1500
TOLERANCEVOLTAGE CODE A B C D E L G R
CAP. CODE CAP.
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 7Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SELECTION CHART
DIELECTRIC (VISHAY CODE) C0G (D)
STYLE VJ2525
CASE CODE 2525
VOLTAGE (VDC) 300 500 630 800 1000 1500 2000 2500 3000 3600
TOLERANCEVOLTAGE CODE D E L I G R F O H W
CAP. CODE CAP.
1R0 1.0 pF •••••••••• B, C, D
1R1 1.1 pF •••••••••• B, C, D
1R2 1.2 pF •••••••••• B, C, D
1R3 1.3 pF •••••••••• B, C, D
1R4 1.4 pF •••••••••• B, C, D
1R5 1.5 pF •••••••••• B, C, D
1R6 1.6 pF •••••••••• B, C, D
1R7 1.7 pF •••••••••• B, C, D
1R8 1.8 pF •••••••••• B, C, D
1R9 1.9 pF •••••••••• B, C, D
2R0 2.0 pF •••••••••• B, C, D
2R1 2.1 pF •••••••••• B, C, D
2R2 2.2 pF •••••••••• B, C, D
2R4 2.4 pF •••••••••• B, C, D
2R7 2.7 pF •••••••••• B, C, D
3R0 3.0 pF •••••••••• B, C, D
3R3 3.3 pF •••••••••• B, C, D
3R6 3.6 pF •••••••••• B, C, D
3R9 3.9 pF •••••••••• B, C, D
4R3 4.3 pF •••••••••• B, C, D
4R7 4.7 pF •••••••••• B, C, D
5R1 5.1 pF •••••••••• B, C, D
5R6 5.6 pF •••••••••• B, C, D
6R2 6.2 pF •••••••••• B, C, D
6R8 6.8 pF •••••••••• B, C, D
7R5 7.5 pF •••••••••• B, C, D
8R2 8.2 pF •••••••••• B, C, D
9R1 9.1 pF •••••••••• B, C, D
100 10 pF •••••••••• F, G, J, K, M
110 11 pF •••••••••• F, G, J, K, M
120 12 pF •••••••••• F, G, J, K, M
130 13 pF •••••••••• F, G, J, K, M
150 15 pF •••••••••• F, G, J, K, M
160 16 pF •••••••••• F, G, J, K, M
180 18 pF •••••••••• F, G, J, K, M
200 20 pF •••••••••• F, G, J, K, M
220 22 pF •••••••••• F, G, J, K, M
240 24 pF •••••••••• F, G, J, K, M
270 27 pF •••••••••• F, G, J, K, M
300 30 pF •••••••••• F, G, J, K, M
330 33 pF •••••••••• F, G, J, K, M
360 36 pF •••••••••• F, G, J, K, M
390 39 pF •••••••••• F, G, J, K, M
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 8Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
430 43 pF •••••••••• F, G, J, K, M
470 47 pF •••••••••• F, G, J, K, M
510 51 pF •••••••••• F, G, J, K, M
560 56 pF •••••••••• F, G, J, K, M
620 62 pF •••••••••• F, G, J, K, M
680 68 pF •••••••••• F, G, J, K, M
750 75 pF •••••••••• F, G, J, K, M
820 82 pF •••••••••• F, G, J, K, M
910 91 pF •••••••••• F, G, J, K, M
101 100 pF •••••••••• F, G, J, K, M
111 110 pF ••••••••• F, G, J, K, M
121 120 pF ••••••••• F, G, J, K, M
131 130 pF ••••••••• F, G, J, K, M
151 150 pF ••••••••• F, G, J, K, M
161 160 pF ••••••••• F, G, J, K, M
181 180 pF ••••••••• F, G, J, K, M
201 200 pF ••••••••• F, G, J, K, M
221 220 pF ••••••••• F, G, J, K, M
241 240 pF ••••••••• F, G, J, K, M
271 270 pF ••••••••• F, G, J, K, M
301 300 pF ••••••• F, G, J, K, M
331 330 pF ••••••• F, G, J, K, M
361 360 pF ••••••• F, G, J, K, M
391 390 pF ••••••• F, G, J, K, M
431 430 pF ••••••• F, G, J, K, M
471 470 pF ••••••• F, G, J, K, M
511 510 pF •••••• F, G, J, K, M
561 560 pF •••••• F, G, J, K, M
621 620 pF •••••• F, G, J, K, M
681 680 pF •••••• F, G, J, K, M
751 750 pF •••••• F, G, J, K, M
821 820 pF •••••• F, G, J, K, M
911 910 pF •••••• F, G, J, K, M
102 1000 pF •••••• F, G, J, K, M
112 1100 pF •••••• F, G, J, K, M
122 1200 pF •••••• F, G, J, K, M
152 1500 pF •••• F, G, J, K, M
182 1800 pF •••• F, G, J, K, M
222 2000 pF •••• F, G, J, K, M
242 2400 pF • • • F, G, J, K, M
272 2700 pF • • F, G, J, K, M
302 3000 pF • • F, G, J, K, M
SELECTION CHART
DIELECTRIC (VISHAY CODE) C0G (D)
STYLE VJ2525
CASE CODE 2525
VOLTAGE (VDC) 300 500 630 800 1000 1500 2000 2500 3000 3600
TOLERANCEVOLTAGE CODE D E L I G R F O H W
CAP. CODE CAP.
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 9Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SELECTION CHART
DIELECTRIC (VISHAY CODE) C0G (D)
STYLE VJ3838
CASE CODE 3838
VOLTAGE (VDC) 300 500 1000 2500 3600 5000 7200
TOLERANCEVOLTAGE CODE D E G O W M S
CAP. CODE CAP.
1R0 1.0 pF ••••••• B, C, D
1R1 1.1 pF ••••••• B, C, D
1R2 1.2 pF ••••••• B, C, D
1R3 1.3 pF ••••••• B, C, D
1R4 1.4 pF ••••••• B, C, D
1R5 1.5 pF ••••••• B, C, D
1R6 1.6 pF ••••••• B, C, D
1R7 1.7 pF ••••••• B, C, D
1R8 1.8 pF ••••••• B, C, D
1R9 1.9 pF ••••••• B, C, D
2R0 2.0 pF ••••••• B, C, D
2R1 2.1 pF ••••••• B, C, D
2R2 2.2 pF ••••••• B, C, D
2R4 2.4 pF ••••••• B, C, D
2R7 2.7 pF ••••••• B, C, D
3R0 3.0 pF ••••••• B, C, D
3R3 3.3 pF ••••••• B, C, D
3R6 3.6 pF ••••••• B, C, D
3R9 3.9 pF ••••••• B, C, D
4R3 4.3 pF ••••••• B, C, D
4R7 4.7 pF ••••••• B, C, D
5R1 5.1 pF ••••••• B, C, D
5R6 5.6 pF ••••••• B, C, D
6R2 6.2 pF ••••••• B, C, D
6R8 6.8 pF ••••••• B, C, D
7R5 7.5 pF ••••••• B, C, D
8R2 8.2 pF ••••••• B, C, D
9R1 9.1 pF ••••••• B, C, D
100 10 pF ••••••• F, G, J, K, M
110 11 pF ••••••• F, G, J, K, M
120 12 pF ••••••• F, G, J, K, M
130 13 pF ••••••• F, G, J, K, M
150 15 pF ••••••• F, G, J, K, M
160 16 pF ••••••• F, G, J, K, M
180 18 pF ••••••• F, G, J, K, M
200 20 pF ••••••• F, G, J, K, M
220 22 pF ••••••• F, G, J, K, M
240 24 pF ••••••• F, G, J, K, M
270 27 pF ••••••• F, G, J, K, M
300 30 pF ••••••• F, G, J, K, M
330 33 pF ••••••• F, G, J, K, M
360 36 pF ••••••• F, G, J, K, M
390 39 pF ••••••• F, G, J, K, M
430 43 pF ••••••• F, G, J, K, M
470 47 pF ••••••• F, G, J, K, M
510 51 pF ••••••• F, G, J, K, M
560 56 pF ••••••• F, G, J, K, M
620 62 pF ••••••• F, G, J, K, M
680 68 pF ••••••• F, G, J, K, M
750 75 pF ••••••• F, G, J, K, M
820 82 pF ••••••• F, G, J, K, M
910 91 pF ••••••• F, G, J, K, M
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 10 Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
101 100 pF ••••••• F, G, J, K, M
111 110 pF •••••• F, G, J, K, M
121 120 pF •••••• F, G, J, K, M
131 130 pF •••••• F, G, J, K, M
151 150 pF •••••• F, G, J, K, M
161 160 pF •••••• F, G, J, K, M
181 180 pF •••••• F, G, J, K, M
201 200 pF ••••• F, G, J, K, M
221 220 pF ••••• F, G, J, K, M
241 240 pF ••••• F, G, J, K, M
271 270 pF ••••• F, G, J, K, M
301 300 pF ••••• F, G, J, K, M
331 330 pF ••••• F, G, J, K, M
361 360 pF ••••• F, G, J, K, M
391 390 pF ••••• F, G, J, K, M
431 430 pF •••• F, G, J, K, M
471 470 pF •••• F, G, J, K, M
511 510 pF •••• F, G, J, K, M
561 560 pF •••• F, G, J, K, M
621 620 pF •••• F, G, J, K, M
681 680 pF •••• F, G, J, K, M
751 750 pF •••• F, G, J, K, M
821 820 pF • • • F, G, J, K, M
911 910 pF • • • F, G, J, K, M
102 1000 pF • • • F, G, J, K, M
112 1100 pF • • • F, G, J, K, M
122 1200 pF • • • F, G, J, K, M
152 1500 pF • • • F, G, J, K, M
182 1800 pF • • • F, G, J, K, M
222 2000 pF • • • F, G, J, K, M
242 2400 pF • • • F, G, J, K, M
272 2700 pF • • • F, G, J, K, M
302 3000 pF • • • F, G, J, K, M
332 3300 pF • • • F, G, J, K, M
362 3600 pF • • • F, G, J, K, M
392 3900 pF • • • F, G, J, K, M
432 4300 pF • • • F, G, J, K, M
472 4700 pF • • • F, G, J, K, M
512 5100 pF • • • F, G, J, K, M
562 5600 pF •• F, G, J, K, M
622 6200 pF •• F, G, J, K, M
682 6800 pF •• F, G, J, K, M
752 7500 pF •• F, G, J, K, M
822 8200 pF •F, G, J, K, M
912 9100 pF •F, G, J, K, M
103 10 000 pF •F, G, J, K, M
113 11 000 pF •F, G, J, K, M
123 12 000 pF •F, G, J, K, M
SELECTION CHART
DIELECTRIC (VISHAY CODE) C0G (D)
STYLE VJ3838
CASE CODE 3838
VOLTAGE (VDC) 300 500 1000 2500 3600 5000 7200
TOLERANCEVOLTAGE CODE D E G O W M S
CAP. CODE CAP.
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 11 Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS
0.01
0.1
1
10
100
10 100 1000
ESR (
Ω
)
FREQUENCY (MHz)
ESR VS. FREQUENCY
SIZE 0505 QUAD RF MLCC
1 pF
10 pF
100 pF
1
10
100
1000
10 000
10 100 1000
Q
FREQUENCY (MHz)
Q VALUE VS. FREQUENCY
SIZE 0505 QUAD RF MLCC
1 pF
10 pF
100 pF
0.1
1
10
1 10 100
SRF (GHz)
CAPACITANCE (pF)
SRF VS. CAPACITANCE
SIZE 0505 QUAD RF MLCC
0.1
1
10
1 10 100
CURRENT (ARMS)
CAPACITANCE (pF)
1000 MHz
500 MHz
150 MHz
CURRENT RATING
SIZE 0505 QUAD RF MLCC, EXT. VOLTAGE
0.001
0.01
0.1
1
10
100
10 100 1000
ESR (
Ω
)
FREQUENCY (MHz)
ESR VS. FREQUENCY
SIZE 1111 QUAD RF MLCC
1.5 pF
10 pF
180 pF
1000 pF
1
10
100
1000
10 000
10 100 1000
Q
FREQUENCY (MHz)
Q VALUE VS. FREQUENCY
SIZE 1111 QUAD RF MLCC
1.5 pF
10 pF
180 pF
1000 pF
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 12 Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS
0.1
1
10
1 10 100 1000
SRF (GHz)
CAPACITANCE (pF)
SRF VS. CAPACITANCE
SIZE 1111 QUAD RF MLCC
0.1
1
10
100
1 10 100 1000
CURRENT (ARMS)
CAPACITANCE (pF)
1 GHz
150 MHz
30 MHz
CURRENT RATING
SIZE 1111 QUAD RF MLCC, EXT. VOLTAGE
0.01
0.1
1
10
100
10 100 1000
ESR (
Ω
)
FREQUENCY (MHz)
ESR VS. FREQUENCY
SIZE 2525 QUAD RF MLCC
1 pF
24 pF
100 pF
270 pF
1
10
100
1000
10 000
10 100 1000
Q
FREQUENCY (MHz)
Q VALUE VS. FREQUENCY
SIZE 2525 QUAD RF MLCC
1 pF
24 pF
100 pF
270 pF
0.01
0.1
1
10
1 10 100 1000 10 000
SRF (GHz)
CAPACITANCE (pF)
SRF VS. CAPACITANCE
SIZE 2525 QUAD RF MLCC
0.1
1
10
100
1 10 100 1000 10 000
CURRENT (ARMS)
CAPACITANCE (pF)
10 MHz
500 MHz
150 MHz
30 MHz
CURRENT RATING
SIZE 2525 QUAD RF MLCC, EXT. VOLTAGE
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 13 Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS
0.001
0.01
0.1
1
10 100 1000
ESR (Ω)
FREQUENCY (MHz)
ESR VS. FREQUENCY
SIZE 3838 QUAD RF MLCC
100 pF
22 pF
390 pF
180 pF
0.001
0.01
0.1
1
10 100 1000
ESR (Ω)
FREQUENCY (MHz)
ESR VS. FREQUENCY
SIZE 3838 QUAD RF MLCC
680 pF
2200 pF
5100 pF
1
10
100
1000
10 000
10 100 1000
Q
FREQUENCY (MHz)
Q VALUE VS. FREQUENCY
SIZE 3838 QUAD RF MLCC
22 pF
100 pF
180 pF
390 pF
1
10
100
1000
10 000
1101001000
Q
FREQUENCY (MHz)
Q VALUE VS. FREQUENCY
SIZE 3838 QUAD RF MLCC
2200 pF
5100 pF
680 pF
QUAD HIFREQ Series
www.vishay.com Vishay Vitramon
Revision: 10-Aug-17 14 Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(3) n/a = not available
(4) Final quantities for packaging can depend on product thickness
STANDARD PACKAGING QUANTITIES (1)(2)(3)(4)
CASE CODE TAPE SIZE
7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES WAFFLE PACK
PLASTIC TAPE
PACKAGING CODE
“T”
LOW QUANTITY
“J”
PLASTIC TAPE
PACKAGING CODE
“R”
PLASTIC WAFFLE PACK
PACKAGING CODE
“W”
0505 8 mm 3000 1000 10 000 n/a
1111 8 mm 2500 1000 9000 n/a
2525 12 mm 800 500 n/a 81
3838 16 mm 400 100 n/a 35
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and ≤ 70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment (1 year for copper).
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS
- 75 - 50 - 25 0 50 100 125
2.0
1.5
1.0
0.5
0.0
- 0.5
- 1.0
- 1.5
- 2.0
NP0
TEMPERATURE °C
150 175
25 75
% CAPACITANCE CHANGE
TEMPERATURE COEFFICIENT OF CAPACITANCE
TEMPERATURE °C
MIN. INSULATION RESISTANCE VS. TEMPERATURE
10 25 100 150
10 000
1000
100
10
50
INSULATION RESISTANCE
(ΩF)
AGING RATE
HOURS
100 1000 10 000
% CAPACITANCE CHANGE
0.2
0.1
0.0
- 0.1
- 0.2
110
0.2
0.1
0.0
- 0.1
- 0.2
DC VOLTS APPLIED
VOLTAGE COEFFICIENT OF CAPACITANCE
% CAPACITANCE CHANGE
0 10 20 30 40 50 60 70 80 90 100
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED