SiUD412ED www.vishay.com Vishay Siliconix N-Channel 12 V (D-S) MOSFET FEATURES PowerPAK(R) 0806 Single * TrenchFET(R) power MOSFET D 3 0.4 mm * Ultra small 0.8 mm x 0.6 mm outline * Ultra thin 0.4 mm max. height * Typical ESD protection 1500 V (HBM) 0. 8 m m 1 0.6 mm Top View 2 S Bottom View * 1.2 V rated RDS(ON) 1 G * 100% Rg tested * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS PRODUCT SUMMARY VDS (V) RDS(on) max. () at VGS = 4.5 V RDS(on) max. () at VGS = 2.5 V RDS(on) max. () at VGS = 1.8 V RDS(on) max. () at VGS = 1.5 V RDS(on) max. () at VGS = 1.2 V Qg typ. (nC) ID (A) Configuration 12 0.34 0.4 0.55 1.2 2.5 0.47 0.5 a, f Single D * Load switch * High speed switching G * DC/DC converters * Battery-operated and mobile devices S N-Channel MOSFET ORDERING INFORMATION Package Lead (Pb)-free and halogen-free PowerPAK 0806 SiUD412ED-T1-GE3 ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-source voltage VDS 12 Gate-source voltage VGS 5 TA = 70 C TA = 25 C 0.5 a, f ID 0.5 b 0.5 b TA = 70 C Pulsed drain current (t = 100 s) Continuous source-drain diode current IDM TA = 25 C TA = 70 C TA = 70 C TA = 25 C 1.5 IS 0.37 b 1.25 a 0.8 a PD W 0.37 b 0.24 b TA = 70 C Operating junction and storage temperature range A 0.5 a, f TA = 25 C Maximum power dissipation V 0.5 a, f TA = 25 C Continuous drain current (TJ = 150 C) UNIT TJ, Tstg -55 to +150 Soldering recommendations (peak temperature) c C 260 THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYPICAL MAXIMUM Maximum junction-to-ambient a, d t5s RthJA 80 100 Maximum junction-to-ambient b, e t5s RthJA 265 335 UNIT C/W Notes a. Surface mounted on 1" x 1" FR4 board with full copper, t = 5 s. b. Surface mounted on 1" x 1" FR4 board with minimum copper, t = 5 s. c. Refer to IPC / JEDEC(R) (J-STD-020), no manual or hand soldering. d. Maximum under steady state conditions is 135 C/W. e. Maximum under steady state conditions is 400 C/W. f. Package limited. S16-1563-Rev. A, 08-Aug-16 Document Number: 70300 1 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiUD412ED www.vishay.com Vishay Siliconix SPECIFICATIONS (TJ = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT VDS VGS = 0 V, ID = 250 A 12 - - V - 9 - - -1 - Static Drain-source breakdown voltage VDS temperature coefficient VDS/TJ VGS(th) temperature coefficient VGS(th)/TJ Gate-source threshold voltage ID = 250 A VGS(th) VDS = VGS , ID = 250 A 0.35 - 0.9 Gate-source leakage IGSS VDS = 0 V, VGS = 4.5 V - - 10 Zero gate voltage drain current IDSS On-state drain current a ID(on) Drain-source on-state resistance a Forward transconductance a mV/C V A VDS = 12 V, VGS = 0 V - - 1 VDS = 12 V, VGS = 0 V, TJ = 55 C - - 10 VDS 5 V, VGS = 4.5 V 1 - - VGS = 4.5 V, ID = 0.5 A - 0.27 0.34 VGS = 2.5 V, ID = 0.2 A - 0.31 0.4 VGS = 1.8 V, ID = 0.1 A - 0.37 0.55 VGS = 1.5 V, ID = 0.1 A - 0.42 1.2 VGS = 1.2 V, ID = 0.05 A - 0.55 2.5 VDS = 6 V, ID = 0.5 A - 1.6 - - 21 - - 13 - - 7 - - 0.47 0.71 - 0.04 - - 0.09 - 3 15 30 - 2 5 - 20 40 - 17 35 - 10 20 - - 0.5 c - - 1.5 - 0.7 1.2 V - 15 30 ns - 3 6 nC - 12.5 - - 2.5 - RDS(on) gfs A S Dynamic b Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss Total gate charge Qg Gate-source charge Qgs Gate-drain charge Qgd Gate resistance Turn-on delay time Rise time Turn-off delay time Fall time VDS = 6 V, VGS = 0 V, f = 1 MHz VDS = 6 V, VGS = 4.5 V, ID = 0.5 A VDS = 6 V, VGS = 4.5 V, ID = 0.5 A Rg f = 1 MHz td(on) tr td(off) VDD = 6 V, RL = 12 , ID 0.5 A, VGEN = 4.5 V, Rg = 1 tf pF nC ns Drain-Source Body Diode Characteristics Continuous source-drain diode current IS Pulse diode forward current ISM Body diode voltage VSD Body diode reverse recovery time trr Body diode reverse recovery charge Qrr Reverse recovery fall time ta Reverse recovery rise time tb TA = 25 C IS = 0.5 A, VGS = 0 V IF = 0.5 A, dI/dt = 100 A/s, TJ = 25 C A ns Notes a. Pulse test; pulse width 300 s, duty cycle 2 %. b. Guaranteed by design, not subject to production testing. c. Surface mounted on 1" x 1" FR4 board with full copper, t = 5 s. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S16-1563-Rev. A, 08-Aug-16 Document Number: 70300 2 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiUD412ED www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) Axis Title Axis Title 10000 100 TJ = 25 C 120.0 80.0 100 2nd line IGSS - Gate Current (A) 1000 1st line 2nd line 2nd line IGSS - Gate Current (mA) 10 160.0 40.0 10000 -1 TJ = 150 C 10-2 10 -3 1000 1st line 2nd line 200.0 10-4 10-5 10-6 10 100 TJ = 25 C -7 10-8 10-9 10 0 0 2 4 6 8 10 12 10 0 14 2 4 6 8 10 12 14 VGS - Gate-to-Source Voltage (V) 2nd line VGS - Gate-to-Source Voltage (V) 2nd line Gate-Current vs. Gate-Source Voltage Gate-Current vs. Gate-Source Voltage Axis Title Axis Title 1.5 2 10000 10000 VGS = 5 V thru 2 V 1.6 0.6 100 TC = 25 C 1000 1.2 1st line 2nd line 0.9 2nd line ID - Drain Current (A) 1000 VGS = 1.5 V 1st line 2nd line 0.8 100 TC = 125 C 0.4 0.3 VGS = 1 V TC = -55 C 0 0 10 0 0.5 1 1.5 2 10 0 0.5 1 2 VDS - Drain-to-Source Voltage (V) 2nd line VGS - Gate-to-Source Voltage (V) 2nd line Output Characteristics Transfer Characteristics Axis Title Axis Title 1 10000 35 10000 VGS = 1.2 V 30 0.8 VGS = 1.5 V 1000 0.6 VGS = 1.8 V 0.4 VGS = 2.5 V 0.2 100 VGS = 4.5 V 10 0.3 0.6 0.9 25 1000 Ciss 20 15 Coss 10 Crss 100 5 0 0 2nd line C - Capacitance (pF) 2nd line RDS(on) - On-Resistance () 1.5 1st line 2nd line 2nd line ID - Drain Current (A) 1.2 1.2 1.5 0 10 0 2 4 6 8 10 ID - Drain Current (A) 2nd line VDS - Drain-to-Source Voltage (V) 2nd line On-Resistance vs. Drain Current and Gate Voltage Capacitance S16-1563-Rev. A, 08-Aug-16 12 Document Number: 70300 3 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiUD412ED www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) Axis Title Axis Title 2 VDS = 3 V 100 1 VDS = 9.6 V 0 ID = 0.5 A 1.6 0.1 0.2 0.3 0.4 0.5 1000 1.4 1.2 VGS = 1.2 V 1.0 100 0.8 0.6 10 0 VGS = 4.5 V; 2.5 V; 1.8 V; 1.5 V 1st line 2nd line 1000 VDS = 6 V 2nd line RDS(on) - On-Resistance (Normalized) ID = 0.5 A 4 3 10000 1.8 10000 1st line 2nd line 2nd line VGS - Gate-to-Source Voltage (V) 5 0.6 10 -50 -25 0 25 50 75 100 125 150 Qg - Total Gate Charge (nC) 2nd line TJ - Junction Temperature (C) 2nd line Gate Charge On-Resistance vs. Junction Temperature Axis Title Axis Title 10000 10 10000 0.8 1 TJ = 25 C 100 0.1 0.6 0.4 0.2 0.4 0.6 0.8 1.0 100 TJ = 25 C 0.2 10 0 1000 TJ = 125 C 1st line 2nd line TJ = 150 C 2nd line RDS(on) - On-Resistance () 1000 1st line 2nd line 2nd line IS - Source Current (A) ID = 0.5 A 0 10 0 1.2 1 2 3 4 5 VSD - Source-to-Drain Voltage (V) 2nd line VGS - Gate-to-Source Voltage (V) 2nd line Source-Drain Diode Forward Voltage On-Resistance vs. Gate-to-Source Voltage Axis Title 0.5 4.0 10000 0.5 3.0 0.4 ID = 250 A Power (W) 0.4 1st line 2nd line VGS(th) (V) 1000 2.0 100 1.0 0.3 0.3 10 -50 -25 0 25 50 75 100 125 150 TJ - Temperature (C) 2nd line Threshold Voltage S16-1563-Rev. A, 08-Aug-16 0.0 0.0001 0.001 0.01 0.1 1 Time (s) 10 100 1000 Single Pulse Power, Junction-to-Ambient Document Number: 70300 4 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiUD412ED www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) Axis Title 10000 1.4 1.0 1000 1st line 2nd line 2nd line ID - Drain Current (A) 1.2 0.8 0.6 Package limited 100 0.4 0.2 0.0 10 0 25 50 75 100 125 150 TA - Ambient Temperature (C) 2nd line Current Derating a Axis Title 10 10000 Limited by RDS(on) 2nd line ID - Drain Current (A) 1.0 Power (W) 0.8 0.6 0.4 (1) IDM limited 1 1000 100 s 1 ms 10 ms 10 s, 1 s, 100 ms100 ID(ON) limited 0.1 DC 0.2 T A = 25 C Single pulse BVDSS limited 0.01 0 0 25 50 75 100 125 TA - Ambient Temperature (C) Power, Junction-to-Ambient 150 1st line 2nd line 1.2 10 0.1 (1) 1 10 100 V DS - Drain-to-Source Voltage (V) V GS > minimum VGS at which RDS(on) is specified Safe Operating Area, Junction-to-Ambient Note a. The power dissipation PD is based on TJ max. = 25 C, using junction-to-ambient thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. S16-1563-Rev. A, 08-Aug-16 Document Number: 70300 5 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiUD412ED www.vishay.com Vishay Siliconix Normalized Effective Transient Thermal Impedance TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 1 Duty Cycle = 0.5 Notes: PDM 0.1 0.2 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = R thJA = 135 C/W 0.05 0.02 0.1 0.0001 3. T JM - TA = PDMZthJA(t) 4. Surface Mounted Single Pulse 0.001 0.01 0.1 1 10 100 1000 Square Wave Pulse Duration (s) Normalized Effective Transient Thermal Impedance Normalized Thermal Transient Impedance, Junction-to-Ambient (on 1" x 1" FR4 board with maximum copper) 1 Duty Cycle = 0.5 0.2 Notes: 0.1 0.1 PDM 0.05 t1 t2 1. Duty Cycle, D = 0.02 t1 t2 2. Per Unit Base = R thJA = 400 C/W 3. T JM - TA = PDMZthJA(t) Single Pulse 4. Surface Mounted 0.01 0.0001 0.001 0.01 0.1 1 10 100 1000 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient (on 1" x 1" FR4 board with minimum copper) Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?70300. S16-1563-Rev. A, 08-Aug-16 Document Number: 70300 6 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix Case Outline for PowerPAK 0.8 mm x 0.6 mm D C Pin 1 Indication E Top View Side View A A1 L D1 b e 2 3 E1 1 K Bottom View INCHES MILLIMETERS DIM. MIN. NOM. MAX. MIN. NOM. MAX. A 0.350 0.380 0.400 0.0138 0.0150 0.0157 A1 0 - 0.020 0 - 0.0008 b 0.120 0.150 0.180 0.0047 0.0059 0.0071 C 0.119 0.127 0.135 0.0047 0.0050 0.0053 D 0.750 0.800 0.850 0.0295 0.0315 0.0335 D1 0.200 0.250 0.300 0.0078 0.0098 0.0118 E 0.550 0.600 0.650 0.0217 0.0236 0.0256 E1 0.450 0.500 0.550 0.0177 0.0197 0.0217 e 0.300 0.350 0.400 0.0118 0.0138 0.0158 K 0.150 0.250 0.350 0.0058 0.0098 0.0138 L 0.200 0.250 0.300 0.0078 0.0098 0.0118 ECN: C13-1574-Rev. A, 23-Dec-13 DWG: 6020 Revision: 23-Dec-13 1 Document Number: 64254 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAD Pattern www.vishay.com Vishay Siliconix Recommended Land Pattern PowerPAK(R) 0806 1 3 2 0.3 0.3 0.13 0.6 3 0.54 1 0.35 0.13 0.03 0.8 2 0.03 0.23 0.55 Revision: 25-Oct-2018 0.62 Document Number: 78035 1 For technical questions, contact: powerictechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000