153
02 03 04 05 06 07 08
09 10 11 12
A
Standard pole sizes
Available on demand. Minimum order quantity 5000
pieces per item.
Type 265
centerline 7.62 mm / 0.300 inches
P/N 312651
Part numbers (P/N) (information: page 110)
Complete the part number by
adding the pole size.
L = (pole size - 1) x centerline + 5.82 mm / 0.229 inches
500 V / 6 kV / 10 A
V / A 300 / 15
Technical Data
Type 265
Header, centerline 7.62 mm / 0.300 inches, horizontal
mounting, square contact pins 1 mm / 0.039 inches,
open ends, codable
Type 262 page 102
to Type 265
Terminal blocks
Accessories
for Type 265
Coding set
700024 page 206
Color black
2 - 12
Pole size
Solder pin length 3.45 mm
Recommended pc board hole
dia. Ø 1.5 mm
Solder pin dimension 1.0 x 1.0 mm
IP00
Protection category according
to IEC 529
Insulating material class CTI 600
min. 6.6 mm
Clearance and creepage distances
Insulation co-ordination according to EN 60664-1
Overvoltage category III III II
Pollution degree 3 2 2
Rated voltage 500 1250 1250
Rated test voltage 4 8 6
Dimensions in mm 1 mm = 0.0394 in.
