Raspberry Pi Power Supply
Features:
Built specifically for use with Raspberry Pi
Class II design 5vdc 1A output via Micro USB
Energy efficient to MEPS V
ĞƐĐƌŝƉƟŽŶ
A 5vdc 1A Australian Micro USB power supply is manufactured
specifically for use with the Raspberry Pi device. It offers a highly
Ğĸ ĐŝĞŶƚŽƵƚƉƵƚŵĞĞƟŶŐůĂƚĞƐƚƐƚĂŐĞϮ;s ͿƌĞƋƵŝƌĞŵ ĞŶƚƐĂŶĚŝƐ
safety approved. This unit has fixed Australian pins and features short
ĐŝƌĐƵŝƚĂŶĚŽǀ ĞƌĐƵƌƌĞŶƚƉƌŽƚĞĐƟŽŶĂƐƐƚĂŶĚĂƌĚ dŚŝƐZĂƐƉďĞƌƌLJWŝ
power supply has M.T.B.F of 50K hours at 25 degrees C.
Part Number RPI-PSU-AU-MK1
Output 5vdc 1A maximum
Current Min. 0.01A
WŽǁ Ğƌ;ǁ ĂƩ ƐͿ 5W
Line Reg +/-5% at rated load
dŽƚĂůK ƵƚƉƵƚZĞŐƵůĂƟŽŶ +/-5 % at 0—100% load
Ripple & Noise (mV p-p) 200mV P-P
WƌŽƚĞĐƟŽŶƐ Over Current and Short Circuit
Case Size 54 x 24 x 38mm
Weight (approx.) 70g
DC Cord 1.8 Metres
DC Plug Micro USB
Rated Input Voltage 100-240Vac
Full Input Voltage Range 90-264Vac
Rated Frequency 50-60Hz
Full Frequency Range 47-63Hz
Efficiency 69.0%
Leakage Current shall not exceed 0.25mA
Input Power 7.72W max
Input Current (RMS Max.) 0.18A max
Hi-Pot Spec 3000Vac 10mA 1 min. (I.P. to O.P.)
E ŽůŽĂĚƉŽǁ ĞƌĐŽŶƐƵŵƉƟŽŶ 0.3W max
K ƉĞƌĂƟŶŐdĞŵƉĞƌĂƚƵƌĞ 0 to 40 degrees C
Storage Temperature -20 to 80 degrees C
K ƉĞƌĂƟŶŐ, ƵŵŝĚŝƚLJ 10% to 90%
Safety Approvals AS/NZS60950.1
EMC Standards EN55022:2006+A1:2007
/ EN6100-3-2 / EN6100-3-3
Pb-free Yes RoHS Compliant
MTBF 50K Hours at 25 degrees C
See mechanical drawing and DC cable drawing on page 2.
Full spec sheet on this PSU is available on request. Premier Farnell Ltd accepts
ŶŽƌĞƐƉŽŶƐŝďŝůŝƚLJĨŽƌƚLJƉŽŐƌĂƉŚŝĐĂůĞƌƌŽƌƐŝŶƚŚĞƉƌŽ ĚƵĐƟŽŶŽĨƚŚŝƐůĞĂŇĞƚ
WƌŽĚƵĐƚƐƉĞĐŝĮ ĐĂƟŽŶƐĂƌĞƐƵďũĞĐƚƚŽĐŚĂŶŐĞǁ ŝƚŚŽƵƚŶŽ ƟĐĞ
Raspberry Pi Power Supply
Mechanical drawing:
Output connector
