Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 10
Device No. : DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao
Technical Data Sheet
0603 Package Chip LED (0.6mm Height)
19-213SUBC/S400-A5/S208-2/TR8
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain with in RoHS compliant version.
Descriptions
․The 19-213 SMD LED is much smaller than lead
frame type components, thus enable smaller board
size, higher packing density, reduced storage space
and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Part No. Material Emitted Color Resin Color
19-213SUBC/S400-A5/S208-2/TR8 InGaN Blue Water Clear
19-213SUBC/S400-A5/S208-2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 2 of 10
Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
19-213SUBC/S400-A5/S208-2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 3 of 10
Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
Forward Current IF 25 mA
Peak Forward Current
(Duty 1/10 @1KHz) IFP 100 mA
Power Dissipation Pd 110 mW
Electrostatic Discharge(HBM) ESD 150 V
Operating Temperature Topr -40 ~ +85 ℃
Storage Temperature Tstg -40 ~ +90 ℃
Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity IV 11.0 ----- 29.0 mcd
Viewing Angle 2θ1/2 ---- 120 ---- deg
Peak Wavelength λp ---- 468 ---- nm
Dominant Wavelength λd 469.5 ---- 475.5 nm
Spectrum Radiation
Bandwidth △λ ---- 25 ---- nm
Forward Voltage VF 2.70 ---- 3.10 V
IF =5mA
Reverse Current IR ---- ---- 50 μA VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.05 V
19-213SUBC/S400-A5/S208-2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 4 of 10
Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao
Bin Range Of Dom. Wavelength
Bin Min Max Unit Condition
2 469.5 475.5 nm IF=5mA
Bin Range Of Luminous Intensity
Bin Min Max Unit Condition
1 11.0 15.0
2 15.0 21.0
3 21.0 29.0
mcd IF=5mA
Bin Range Of Forward Voltage
Bin Min Max Unit Condition
1 2.70 2.80
2 2.80 2.90
3 2.90 3.00
4 3.00 3.10
V IF=5mA
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.05V
19-213SUBC/S400-A5/S208-2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 5 of 10
Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao
Typical Electro-Optical Characteristics Curves
Relative Luminous Intensity
Ambient Temperature T (°C
-60
Forward Current Derating Curve
Ambient Temperature T (°C
0
Forward Current
10
0
20
30
F
I (mA)
40
50
1
10
40
20 60
a)
10085
-20-40 0 20 60
40
)
a
10080
100
%)
(
1000
Relative Luminous Intensity vs.
Ambient Temperature
10
Relative luminous intensity
1
10
100
%)
(
1000
Forward Current
010
110
2
I (mA)
F
Relative Luminous Intensity vs
Forward Current
%
400
Relative Luminous Intensity
025 7550
(
100
550
450 500 600
)
Spectrum Distribution
Forward Voltage( )-volts
vF
2.6
0
10
20
40
30
50
Forward Voltage
4.23.43.0 3.8
Forward Current vs.
24
Forward Current F
I (mA)
Wavelength λ (nm)
0.7
0.9
0.8
1.0
0.40.30.5 0.1 0.2
70°
0.6
80°
90°
50°
60°
40°
Radiation Diagram
0° 10° 20°
30°
Ta=25°C
Ta=25°C
Ta=25°C
Ta=25°C
19-213SUBC/S400-A5/S208-2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 6 of 10
Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
RoHS
Pb
CPN :
PN : XXXXXXXXXXXXX
XXXXXXXXXXXXX
QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
CAT : XXX
HUE : XXX
REF : XXX
EVERLIGHT
MADE IN TAIWAN
19-213SUBC/S400-A5/S208-2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 7 of 10
Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Aluminum moisture-proof bag Desiccant Label
19-213SUBC/S400-A5/S208-2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 8 of 10
Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
No. Items Test Condition
Test
Hours/Cycles Sample
Size Ac/Re
1 Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1
6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1
19-213SUBC/S400-A5/S208-2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 9 of 10
Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
19-213SUBC/S400-A5/S208-2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 10 of 10
Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
