NTC Type MS Thermometrics EpoxyCoated Thermistor Description Features Epoxy-coated point-matched disc thermistors with 0.01 in (0.254 mm) nickel PTFE insulated leadwires. * Low cost, solid state temperature sensor * High sensitivity to changes in temperature * Suitable for temperature measurement, control and compensation * Standard resistance tolerances down to 2% * Excellent mechanical strength * Wide operating temperature range: -58F to 300F (-50C to 150C) * Suitable for PCB and probe mountings * Available in a wide range of material systems * Overall lengths from 0.71 in to 3.07 in (18 mm to 78 mm) Amphenol Advanced Sensors Type MS Specifications Epoxy-coated thermistor Type Number Ro@ 77 F (25 C) (W) Material System A in mm RL0703-624-73-MS 1K D7.3 0.120 3.05 RL0503-1248-73-MS 2K D7.3 0.095 2.41 RL0703-1445-95-MS 2.5K D9.5 0.120 3.05 RL0503-2890-95-MS 5K D9.5 0.095 2.41 RL0703-2910-97-MS 5K D9.7A 0.120 3.05 RL0703-3720-84-MS 6K D8.4 0.120 3.05 RL0503-5820-97-MS 10K D9.7A 0.095 2.41 RL0703-5744-103-MS 10K D10.3 0.120 3.05 RL0503-7440-84-MS 12K D8.4 0.095 2.41 RL0703-8780-96-MS 15K F9.61 0.120 3.05 RL0503-11.49K-103-MS 20K D10.3 0.095 2.41 RL0703-13.77K-120-MS 25K D12.0 0.120 3.05 RL0503-17.56K-96-MS 30K F9.61 0.095 2.41 RL0503-27.53K-120-MS 50K D12.0 0.095 2.41 RL0703-27.68K-122-MS 50K D12.2 0.120 3.05 RL0503-55.36K-122-MS 100K D12.2 0.095 2.41 1.13 in (28.7 mm) 0.1 in (2.54 mm) 0.25 in (6.35 mm) maximum Epoxy insulated A 0.2 in (5.08 mm) 0.04 in (1.02 mm) AWG #30, nickel PTFE insulated NTC Type MS Dimensions Options Data * * * * * * * Temperature accuracy: 1C @ 77F (25C) * Dissipation constant: 1.4 mW/C * Time constant: 15 seconds * Operating range: -58F to 302F (-50C to 150C) Other resistances in the range 2 k to 100 k Other tolerances, tolerances at other temperatures Alternative lead lengths, lead materials, insulations For 5% @ 77F (25C), replace "MS" with "MS5" For 3% @ 77F (25C), replace "MS" with "MS3" For 2% @ 77F (25C), replace "MS" with "MS2" Amphenol Advanced Sensors www.amphenol-sensors.com (c) 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. AAS-920-574A-03/2014