8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Features: * High speed 10Mbit/s * Fan out of 8 over -40 to 85 * Logic gate output * High isolation voltage between input and output (Viso=5000 V rms ) * Compact small outline package * Pb free and RoHS compliant. Description The 6N137series devices each of consist of an infrared emitting diodes, optically coupled to a Very high speed integrated photo detector logic gate with a strobable output. They are packaged in an 8-pin DIP package and available in wide-lead spacing and SMD option. Applications * Ground loop elimination * LSTTL to TTL, LSTTL or 5 volt CMOS * Line receiver, data transmission * Data multiplexing * Switching power supplies * Pulse transformer replacement * Computer peripheral interface Truth Table (Positive Logic) Input Enable Output H H L L H H H L H L L H H NC L L NC H Isocom Components Ltd. Document NoDC93136 1 Rev. 1 Schematic 1 8 2 7 3 6 4 5 Pin Configuration 1, 4. N.C 2, Anode 3, Cathode 5, Gnd 6, Vout 7, VE 8, VCC http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Absolute Maximum Ratings (Ta=25C) Parameter Symbol Rating Unit Forward current IF 50 mA Enable input voltage Not exceed VCC by more than 500mV VE 5.5 V Reverse voltage VR 5 V Power dissipation PD 100 mW Power dissipation PC 85 mW Output current IO 50 mA Output voltage VO 7.0 V Supply voltage VCC 7.0 V PO 100 mW Isolation voltage *1 VISO 5000 V rms Operating temperature TOPR -55 ~ +85 C Storage temperature TSTG -55 ~ +125 C Soldering temperature *2 TSOL 260 C Input Output Output Power Dissipation Notes *1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1 & 2 are shorted together, and pins 3 & 4 are shorted together. *2 For 10 seconds. Isocom Components Ltd. Document NoDC93136 2 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Electrical Characteristics (Ta= -40 to 85C unless specified otherwise) Input Parameter Symbol Min. Typ.* Max. Unit Condition Forward voltage VF - 1.4 1.8 V IF = 10mA Reverse voltage VR 5.0 - - V IR = 10A Input capacitance CIN - 60 - pF VF=0, f=1MHz Symbol Min. Typ.* Max. Unit High level supply current ICCH - 7 10 mA IF=10mA, VE=0.5V, VCC=5.5V Low level supply current ICCL - 9 13 mA IF=0mA, VE=0.5V, VCC=5.5V High level enable current IEH - -0.6 -1.6 mA VE=0.5V, VCC=5.5V Low level enable current IEL - -0.8 -1.6 mA VE=2.0V, VCC=5.5V High level enable voltage VEH 2.0 - - V IF=10mA, VCC=5.5V Low level enable voltage VEL - - 0.8 V IF=10mA, VCC=5.5V Output Parameter Condition Transfer Characteristics (Ta=- 40 to 85C Unless otherwise specified) Parameter Symbol Min. Typ.* Max. Unit Condition High Level Output Current IOH - - 100 A VCC=5.5V, VO=5.5V, IF=250uA, VE=2.0V Low Level Output Current VOL - 0.35 0.6 V VCC=5.5V, ICL=13mA, IF=5mA, VE=2.0V Input Threshold Current IFT - 2.5 5 mA VCC=5.5V, VO=0.6V, VE=2.0V, IOL=13mA * Typical values at Ta = 25C Isocom Components Ltd. Document NoDC93136 3 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Switching Characteristics (Ta=- 40 to 85C, VCC=5V, IF=7.5mA unless specified otherwise) Parameter Symbol Min. Typ.* Max. Unit Propagation delay time to output High level TPHL - 35 75 S CL = 15pF, RL=350, TA=25C Propagation delay time to output Low level TPLH - 40 75 S CL = 15pF, RL=350, TA=25C TPHL -TPLH - - 35 ns CL = 15pF, RL=350 Output rise time tr - 40 50 ns CL = 15pF, RL=350 Output full time tf - 10 30 ns CL = 15pF, RL=350 Enable Propagation Delay Time to Output High Level tELH - 15 - ns Enable Propagation Delay Time to Output Low Level tEHL - Pulse width distortion Common Mode Transient Immunity at Logic High 15 - ns Condition IF = 7.5mA , VEH=3.5V, CL = 15pF, RL=350 IF = 7.5mA , VEH=3.5V, CL = 15pF, RL=350 IF = 0mA , VCM=50Vp-p, CMH 5000 - - V/S VOH=2.0V, RL=350, TA=25C Common Mode Transient Immunity at Logic Low IF = 7.5mA , VCM=50Vp-p, CML 5000 - - V/S VOL=0.8V, RL=350, TA=25C * Typical values at Ta = 25C Isocom Components Ltd. Document NoDC93136 4 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Typical Performance Curves Isocom Components Ltd. Document NoDC93136 5 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER Isocom Components Ltd. Document NoDC93136 6 Rev. 1 6N137 Series http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series IF=7.5mA Input (IF) Pulse Generator tr=5ns Zo=50 IF=3.75mA tPHL +5V tPLH Output (Vo) RL 1.5V 0.1uF Input Monitor IF Vo 47 90% Output (Vo) 10% tf Isocom Components Ltd. Document NoDC93136 7 Rev. 1 tr http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Fig. 12 Test circuit and waveforms for tPHL, tPLH, tr, and tf Inut Monitor VE Pulse Generator tr=5ns, Zo=50 +5V 7.5mA 3.0V 0.1uF RL Vo Input (VE) 1.5V tEHL tELH Output (Vo) 1.5V Isocom Components Ltd. Document NoDC93136 8 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Fig. 13 Test circuit for tEHLand tELH IF +5V 0.1uF B 350 A Vo VFF VCM Peak VCM 0V 5V CMH Switching Pos. (A), IF=0 Vo VO(Min) VO(Max) Switching Pos. (B), IF=7.5mA VCM CML 0.5V Fig. 14 Test circuit Common mode Transient Immunity Isocom Components Ltd. Document NoDC93136 9 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Order Information Part Number 6N137Y Note Y = Lead form option ( G SM SM T+Ror none) Option Description Packing quantity None Standard DIP-8 45 units per tube G Wide lead bend (0.4 inch spacing) 45 units per tube SM Surface mount lead form 45 units per tube SM T+R Surface mount lead form + tape & reel option 1000 units per reel Isocom Components Ltd. Document NoDC93136 10 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Package Drawing (Dimensions in mm) Standard DIP Type Option G Type Isocom Components Ltd. Document NoDC93136 11 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Option SM Type Isocom Components Ltd. Document NoDC93136 12 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Recommended pad layout for surface mount leadform Device Marking 6N137 IYWW Notes 6N137 Y WW I denotes Device Number denotes 1 digit Year code denotes 2 digit Week code denotes Isocom Isocom Components Ltd. Document NoDC93136 13 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Tape & Reel Packing Specifications Option T+R Direction of feed from reel Tape dimensions Dimension No. A B Do D1 E F Dimension(mm) 10.40.1 10.00.1 1.50.1 1.50.1 1.750.1 7.50.1 Dimension No. Po P1 P2 t W K Dimension(mm) 4.00.1 12.00.1 2.00.1 0.40.1 16.0+0.3/ -0.1 4.50.1 Isocom Components Ltd. Document NoDC93136 14 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series Solder Reflow Temperature Profile 260 C (peak,10 Sec Max) >255 C ( 30s Max ) 217 200 1-3 C/Sec 60 - 140 Sec 150 70 - 170 Sec 1-3 C/Sec TIME (S) Isocom Components Ltd. Document NoDC93136 15 Rev. 1 http://www.isocom.com April 15, 2009 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 Series DISCLAIMER 1. Above specification may be changed without notice. Isocom will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. Isocom assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of Isocom. Please don't reproduce or cause anyone to reproduce them without Isocom's consent. Isocom Components Ltd. Document NoDC93136 16 Rev. 1 http://www.isocom.com April 15, 2009