preliminary data sheet SKY65124: 1930-1990 MHz High Linearity 2 W Power Amplifier Applications l l l l WCDMA/PCS/DCS/UTMS/TD-SCDMA Repeaters ISM band transmitter WCS fixed wireless Block Diagram VCC1 High linearity: OIP3 > 45 dBm P1 dB > 33 dBm * ACLR = -45 dBc for Pout > 25 dBm * ACLR = -55 dBc for Pout > 21 dBm * High efficiency: PAE 35% * High gain: 24 dB * Single DC supply: 5 V * Internal RF match with DC block l Active bias circuit l M CM (20-pin, 6 x 6 mm) lead (Pb)-free package (MSL3 @ 260 C per JEDEC J-STD-020) VREF2 VC_Bias VCC2 Active Bias RF In Features VREF1 Interstage Match Input Match Stage 1 l RF Out Output Match Stage 2 l GND N/C GND GND GND 1 20 19 18 17 2 15 N/C GND 3 14 N/C VC_BIAS 4 13 VCC1 N/C 5 12 N/C VREF1 6 11 VCC2 7 8 9 10 GND RF_IN RF_OUT 16 GND The SKY65124 is a fully matched 20-pin, lead-free, surface mount, Multichip Module (MCM) Power Amplifier (PA) designed for WCDMA/ PCS/DCS/UTMS/TD-SCDMA radio, repeaters, transmitters, mobile radios and WCS fixed wireless applications operating in the 1930-1990 MHz bandwidth. GND VREF2 Description Package Diagram All active circuitry in the module is contained in a single Gallium Arsenide (GaAs) Microwave Monolithic Integrated Circuit (MMIC). The device is manufactured with Skyworks Aluminum (Al) GaAs Heterojunction Bipolar Transistor (HBT) process, which allows for single supply operation while maintaining high efficiency and good linearity. The module can operate over the temperature range of -40 C to +85 C. A populated evaluation board is available upon request. NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Preliminary Data Sheet: Based on engineering results. Sampling quantities available. Pin out and package have been determined. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200996 Rev. A * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * April 6, 2009 1 preliminary Data Sheet * SKY65124 Electrical Specifications VCC1, VCC2, VREF1, VREF2, VC_BIAS = 5 V, Test Frequency = 1960 MHz, Tc = 25 C, ZO = 50 , unless otherwise specified Parameter Frequency Symbol Condition F Min. Typ. 1930 Max. Unit 1990 MHz Small signal gain lS21l Small signal 24 dB Input return loss lS11l Small signal 29 dB Output return loss lS22l Small signal 15 dB Output power @ P1 dB P1 dB CW 33 dBm Output 3rd order intercept OIP3 Pout/tone = 25 dBm, tone spacing= 5 MHz 45 dBm Noise figure NF CW 6.3 dB Pout @ ACLR = -45 dBc Pout_ACLR1 WCDMA test tone #1: 64 DPCH, DF = 5 MHz 25 dBm Pout @ ACLR = -55 dBc Pout_ACLR2 WCDMA test tone #1: 64 DPCH, DF = 10 MHz 21 dBm Power-added efficiency PAE CW, Pout @ P1 dB 39 Quiescent current Iccq No RF signal 500 mA Thermal resistance qJC Junction to case 22 C/W % Absolute Maximum Ratings Characteristic Value RF input power (POUT) 5 dBm Supply voltage (VCC, VREF, VC_BIAS) Total supply current (ICC + IBIAS + IREF) 6V 1100 mA Operating case temperature (TC) -40 C to +85 C Storage temperature (TST) -55 C to +125 C Junction temperature (TJ) 150 C Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. Each absolute maximum rating listed is an individual parameter. Biasing and driving the amplifier with more than one absolute maximum rating listed may result in permanent damage to the device. Exposure to maximum rating conditions for extended periods may reduce device reliability. CAUTION: A lthough this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be employed at all times. Recommended Operating Conditions Parameter Symbol Conditions Min. Typ. Unit 1990 MHz Operating frequency FO RF input power (small signal) PIN -10 dBm VCC, VC_BIAS, VREF 5 V Supply voltages (Note 1) Operating case temperature TC 1930 Max. -40 25 85 Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 April 6, 2009 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200996 Rev. A C preliminary Data Sheet * SKY65124 Typical Performance Data 1930 MHz 27.5 27.0 26.5 26.0 25.5 25.0 24.5 24.0 23.5 23.0 22.5 22.0 1960 MHz 1990 MHz 50 49 48 47 OIP3 (dBm) Gain (dB) VCC1, VCC2, VREF1, VREF2, VC_BIAS = 5 V, Test Frequency = 1960 MHz, Tc = 25 C, ZO = 50 , unless otherwise specified 46 45 44 43 42 41 40 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 15 1930 MHz 1.4 23 25 27 29 1960 MHz 1990 MHz -40 1.3 1.2 -45 1.1 1.0 ACLR (dBc) ICC Total (A) 21 Oip3 vs. power Out/tone across Frequency DF = 5 mhz Gain vs. power Out across Frequency 0.9 0.8 0.7 0.6 -50 -55 -60 0.5 -65 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 Power Out (dBm) aClr vs. power Out across Frequency WCdma test tone #1; 64 DpCh, DF = 5 mhz 40.0 34.0 39.5 33.9 33.8 Output P1 dB (dBm) 39.0 38.5 38.0 37.5 37.0 33.7 33.6 33.5 33.4 33.3 33.2 36.5 36.0 1.93 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Power Out (dBm) total Collector Current vs. power Out PAE @ P1 dB (%) 19 Power Out/Tone (dBm) Power Out (dBm) 0.4 17 33.1 1.96 1.99 33.0 1.93 1.96 Frequency (GHz) Frequency (GHz) pae @ p1 dB vs. Frequency Output p1 dB vs. Frequency 1.99 Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200996 Rev. A * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * April 6, 2009 3 preliminary Data Sheet * SKY65124 Typical Performance Data VCC1, VCC2, VREF1, VREF2, VC_BIAS = 5 V, Test Frequency = 1960 MHz, Tc = 25 C, ZO = 50 , unless otherwise specified 27.0 7.0 6.8 26.6 26.4 Noise Figure (dB) Small Signal Gain (dB) 26.8 26.2 26.0 25.8 25.6 25.4 6.4 6.2 6.0 5.8 25.2 25.0 1.93 6.6 1.96 5.6 1.93 1.99 Frequency (GHz) -10 -12 -12 -14 -14 -16 -16 -18 -18 |S22| (dB) |S11| (dB) noise Figure vs. Frequency -10 -20 -22 -20 -22 -24 -24 -26 -26 -28 -28 1.96 1.99 -30 1.93 1.96 Frequency (GHz) Frequency (GHz) |s11| vs. Frequency |s22| vs. Frequency Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 1.99 Frequency (GHz) small signal Gain vs. Frequency -30 1.93 1.96 April 6, 2009 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200996 Rev. A 1.99 preliminary Data Sheet * SKY65124 Theory of Operation The SKY65124 is comprised of two amplifier stages. The matching circuits for the input stage, inter-stage, and output stage are contained within the device. An on-chip active bias circuit is included within the device for both input and output stages providing for excellent gain tracking over temperature and voltage variations. The SKY65124 is internally matched for optimum linearity and efficiency. The input and output stages are independently supplied using the VCC1 and VCC2 supply lines, pins 13 and 11, respectively. The bias reference voltages for stages 1 and 2 are supplied using common lines VREF1 and VREF2 (pins 6 and 7) line. The DC control voltage that sets the bias to stages 1 and 2 is supplied via VC_BIAS, pin 4. Application Circuit Notes Center Ground. It is extremely important that the device paddle be sufficiently grounded for both thermal and stability reasons. Multiple small vias are acceptable and will work well under th edevice if solder migration is an issue. Ground (Pins 1, 2, 3, 8, 10, 17, 19, 20). Attach all ground pins to the RF ground plane with the largest diameter and lowest inductance via that the layout will allow. Multiple small vias are also acceptable and will work well under the device if solder migration is an issue. VC_BIAS (Pin 4). VC_BIAS is the bias supply voltage for stages 1 and 2. Typically set to 5 V. VREF1 (Pin 6). Bias reference voltage for amplifier stage 1. VREF1 should be operated over the same voltage range as VCC, with a nominal voltage of 5 V. VREF2 (Pin 7). Bias reference voltage for amplifier stage 2. VREF1 should be operated over the same voltage range as VCC, with a nominal voltage of 5 V. RF_OUT (Pin 9). Amplifier RF Output Pin. ZO = 50 W. The module includes an onboard internal DC blocking capacitor. All impedance matching is provided internal to the module. VCC2 (Pin 11). Supply voltage for the output (final) stage collector bias (typically 5 V). Bypassing of VCC2 is accomplished with C10, C11 and C12 and should be placed in the approximate location shown on the evaluation board, but placement is not critical. VCC1 (Pin 13). Supply voltage for the first stage collector bias (typically 5 V). Bypassing of VCC1 is accomplished with C6, C7 and C8 and should be placed in the approximate location shown on the evaluation board, but placement is not critical. RF_IN (Pin 16). Amplifier RF Input Pin. ZO = 50 W. The module includes an onboard internal DC blocking capacitor. All impedance matching is provided internal to the module. No Connect (Pins 5, 12, 14, 15, 18). The pins are open and may or may not be connected to ground. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200996 Rev. A * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * April 6, 2009 5 preliminary Data Sheet * SKY65124 Package and Handling Information Electrostatic Discharge (ESD) Sensitivity Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SKY65124 is a static-sensitive electronic device. Do not operate or store near strong electrostatic fields. Take proper ESD precautions. Please refer to Skyworks' Solder Reflow application note, available at www.skyworksinc.com, for instructions on mounting the SKY65124 to a printed circuit board. Production quantities of this product are shipped in a standard tape and reel format. For packaging details, refer to the Skyworks Tape and Reel application note, document number 101568. Application Circuit J1 RFin C13 10 F VREF1 C1 8.2 pF C2 1200 pF 5 R1 330 R2 150 VREF2 6 GND6 NC5 GND7 RF_IN N/C4 N/C3 GND3 SKY65124 VC_BIAS VCC1 N/C1 N/C2 VREF1 VCC2 7 8 9 16 15 14 13 C7 3300 pF C6 10 pF C8 10 F C10 10 pF C11 1500 pF C12 10 F 12 11 10 J2 RFout C3 1200 pF Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 6 VCC1 GND5 4 VC_BIAS 17 GND2 RF_OUT 3 18 GND4 2 GND1 VREF2 1 19 GND8 20 April 6, 2009 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200996 Rev. A VCC2 preliminary Data Sheet * SKY65124 Pin Assignments Evaluation Board VC_BIAS N/C 6 VREF1 7 Bias voltage No connect VREF2 8 GND Bias reference voltage 1 RFIN 5V GND 5V 5V GND J3 GND GND C13 C13 C2 R4 R4 U1 C7 R1 R1 C2 C3 R2 C3 J2 R2 Bias reference voltage 2 Low inductance ground connection GND R3 U1 C1 VREF1 VREF2 J1 J1 R3 VC_BIAS C4 4 SKYWORKS 2006 J2 S/N C9 C10 C4 C5 Low inductance ground connection C6 GND C7 3 C6 GND VCC_DET C5 R5 VDET C8 C8 VCC1 J4 R5 Low inductance ground connection C9 Low inductance ground connection GND C11 GND 2 RF_In C10 1 5 Description C1 Pin Name . Pin C11 VCC2 C12 RF OUT C12 N/C N/C 5V 5V TW16-D190- 9 RF_OUT 10 GND RF output Low inductance ground connection 11 VCC2 Stage 2 collector voltage 12 N/C No connect 13 VCC1 Stage 1 collector voltage 14 N/C No connect 15 N/C No connect Step 1. Connect RF test equipment to amplifier input/output SMA connectors. 16 RF_IN RF input Step 2. Connect DC ground. 17 GND Low inductance ground connection 18 N/C No connect Step 3. Connect all VCC, VREG and VC_BIAS lines to 5 V supply. Verify the ICCQ current is approximately 550 mA. 19 GND Low inductance ground connection 20 GND Low inductance ground connection Center attachment pad must have a low inductance and low thermal resistance connection to the customer's printed circuit board ground plane. Evaluation Board Description The Skyworks SKY65124 Evaluation Board is used to test the performance of the SKY65124 power amplifier module. The following design considerations are general in nature and must be followed regardless of final use or configuration. 1. Paths to ground should be made as short as possible. 2. The ground pad of the SKY65124 power amplifier module has special electrical and thermal grounding requirements. This pad is the main thermal conduit for heat dissipation. Since the circuit board acts as the heat sink, it must shunt as much heat as possible from the amplifiers. As such, design the connection to the ground pad to dissipate the maximum wattage produced to the circuit. Multiple vias to the grounding layer are required. RF_Out Evaluation Board Test Procedure Step 4. Apply RF signal data -10 dBm level and observe that the output level is approximately 14 dBm or the gain of the device is approximately 24 dB. NOTE: It is important that the VCC1 and VCC2 voltage source be adjusted such that 5 V is measured at the board. The high collector currents will drop the collector voltage significantly if long leads are used. Adjust the bias voltage to compensate. Recommended Solder Reflow Profiles Refer to the "Recommended Solder Reflow Profile" Application Note. Tape and Reel Information Refer to the "Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation" Application Note. NOTE: J unction temperature (TJ) of the device increases with a poor connection to the slug and ground. This reduces the lifetime of the device. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200996 Rev. A * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * April 6, 2009 7 preliminary Data Sheet * SKY65124 Evaluation Board Layer Detail Layer 1: Solder Mask Layer 1: Top Metal Layer 2 and 3: Ground Layer 4: Solid Ground Plane Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 8 April 6, 2009 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200996 Rev. A preliminary Data Sheet * SKY65124 Bill of Material for Evaluation Board Part ID Qty. Size Value Units Product Number Manufacturer Manufacturer's Part Number Characteristics 1 C1 1 0603 8.2 pF 5404R23-046 Murata GRM1885C1H8R2CZ01D COG, 50 V, 0.25 pF 2 C2 1 0603 1200 pF SK204-000-002 Murata GRM1887U1H122J U2J, 50 V, 5% 3 C3 1 0603 1200 pF SK204-000-002 Murata GRM1887U1H122J U2J, 50 V, 5% 4 C6 1 0603 10 pF 5404R23-047 Murata GRM1885C1H100RD51D COG, 50 V, 0.25 pF 5 C7 1 0603 3300 pF 5404R28-015 Murata GRM188R71H332KD01J X7R, 50 V, 10% 6 C8 1 1206 10 F 5404R91-005 TDK C3216X5R0J106KT X5R, 6 V, 10% 7 C10 1 0603 10 pF 5404R23-047 Murata GRM1885C1H100RD51D COG, 50 V, 0.25 pF 8 C11 1 0603 1500 pF 5404R24-015 AVX 06031C152MATMA X7R, 100 V, 20% 9 C12 1 1206 10 F 5404R91-005 TDK C3216X5R0J106KT X5R, 6 V, 10% 10 C13 1 1206 10 F 5404R91-005 TDK C3216X5R0J106KT X5R, 6 V, 10% 11 R1 1 0603 330 W 5424R20-037 ROHM MCR03EZHUJ330 50 V, 0.063W, 5% 12 R2 1 0603 150 W 5424R19-114 ROHM MCR03EZHUF150 50 V, 0.063W, 1% Evaluation Board Stack-Up Cross Section Branding Specifications Name Thickness (mils) Material r L1 - 1.4 Cu Rogers 4003-12 3.38 Lam1 12 L2_GND 1.4 Cu, 1 oz. - 4 FR4-4 4.35 1.4 Cu, 1 oz. - Lam2 L3_GND Lam3 12 FR4-12 4.35 L4 1.4 Cu, 1 oz. - Mark Pin 1 Identifier Manufacturing Part Number Revision Number SKY65124-21 EXXXXX.XX YYWW MX Lot Number YY = Manufacture Year WW = Week Packaged Sealed MX = Country Code Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200996 Rev. A * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * April 6, 2009 9 preliminary Data Sheet * SKY65124 Package Dimensions Recommended Footprint 6 Pin 1 Indicator Thermal Via Array O0.3 mm On 0.6 mm Pitch Will Improve Thermal Performance Top 20X 0.75 mm 0.25 mm Typ. Pin 20 Pin 1 20X 0.5 mm 6 0.6 mm Typ. 6.3 mm 1 mm Typ. Pin 20 Package Outline (0.3) Solder Mask Opening (2.075) 4X 0.5 2X 1.9 4X 1.5 12X 2.9 1.45 0.1 0.6 mm Typ. O0.15 Metal Pad Pin 1 6.3 mm (2.75) 4X 2.5 Pin 1 4X 1.5 Solder Mask Pin 20 4X 0.5 20X 0.85 mm Pin 1 20X 0.6 mm A 2X 1.9 20X SMT Pad 8X 2.9 4X R0.2 2X 1.7 mm 6.4 mm 1 mm Typ. Solder Mask Opening 0.5 0.1 0.1 Package Outline 2X 1.7 mm 6.4 mm 0.5 0.05 Metal Pad Edge Stencil Pattern Pin 20 20X 0.75 mm Pin 1 Detail A All dimensions are in millimeters Dimensioning and tolerancing according to ASME Y14.5M-1994 20X 0.5 mm 2X 1.7 mm 6.3 mm 1 mm Typ. Package Outline 2X 1.7 mm Stencil Aperture Size of 80 to 100% of the Module/Pkg. Solder Mask Opening 6.3 mm Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 10 April 6, 2009 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200996 Rev. A preliminary Data Sheet * SKY65124 Tape and Reel Dimensions 8.00 (P1) 0.3 0.02 O1.50 0.10 4.00 (Po) 2.00 0.05 B Pin 1 1.75 0.10 5.50 0.05 A A 12.00 0.30 6.35 (Bo) 7 max B 1.59 (Ko) Section B-B O1.50 Min. 6.35 (Ao) 8 Max. Section A-A 1. Carrier tape: black conductive polystyrene 2. Cover tape material: transparent conductive PSA 3. Cover tape size: 9.3 mm width 4. All dimensions are in millimeters Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200996 Rev. A * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * April 6, 2009 11 preliminary Data Sheet * SKY65124 Ordering Information Model Name Manufacturing Part Number Evaluation Kit Part Number SKY65124: 1930-1990 MHz High Linearity 2 W Power Amplifier SKY65124-21 (Pb-free package) TW16-D193-001 Copyright (c) 2009, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 12 April 6, 2009 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200996 Rev. A