PRODUCT DATASHEET Tina series last update 6/11/2015 Product number FA10887_TINA-RS Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Tina Assembly XP-G White 16.1 mm 9.7 mm Round PMMA ["tape"] Production ready Product number FA10644_TINA-D Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Tina Assembly XP-G White 16.1 mm 9.7 mm Round PMMA ["tape"] Production ready Product number FA10645_TINA-M Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Tina Assembly XP-G White 16.1 mm 9.7 mm Round PMMA ["tape"] Production ready Product number FA11200_TINA-O Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Tina Assembly XP-G White 16.1 mm 9.7 mm Round PMMA ["tape"] Production ready FWHM Efficiency cd/lm Gerber File 15 degrees 94 % 11.100 Available FWHM Efficiency cd/lm Gerber File 20 degrees 93 % 5.130 Available FWHM Efficiency cd/lm Gerber File 30 degrees 90 % 2.230 Available FWHM Efficiency cd/lm Gerber File 33+18 degrees 92 % 3.180 Available April 9th 2018 12:41 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 PRODUCT DATASHEET Tina series last update 6/11/2015 Product number FA10838_TINA-W Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Tina Assembly XP-G White 16.1 mm 9.7 mm Round PMMA ["tape"] Production ready Product number FA11019_TINA-WW Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Tina Assembly XP-G White 16.1 mm 9.7 mm Round PMMA ["tape"] Production ready FWHM Efficiency cd/lm Gerber File 51 degrees 92 % 1.150 Available FWHM Efficiency cd/lm Gerber File 62 degrees 91 % 0.800 Available NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. April 9th 2018 12:41 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 PRODUCT DATASHEET Tina series last update 6/11/2015 GENERAL INFORMATION - Product series especially designed & optimized for XP-G series of LEDs. - Special care taken to make light distribution as uniform as possible. - Lens material optical grade PMMA with high UV and temperature resistance. Allows use of high current and temperature conditions. Please find more information about used material from below: http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf April 9th 2018 12:41 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 Relative intensity of FA11019_Tina-WW-WHT (XP-G) 100 % 75 % 50 % 25 % 0% 90 80 70 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 A B C D 9.7 4 4 Front view Isometric view 3 3 2 16 Oval beam direction .1 Top view Bottom view INDEX PART NO - 1 2 - Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 2 PU foam tape 0.4mm This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Tina lens Tina holder PMMA PC white Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE Tina serie datasheet SIZE 1 PART NUMBER A4 SCALE D DESCRIPTION MATERIAL COLOUR 1:1 WEIGHT SHEET A 1/1