TOSHIBA TC4044BP/BF/BFN TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TC4044BP, TC4044BF, TC4044BFN TC4044B QUAD 3-STATE R/S LATCH (Quad NAND R/S Latch) (Note) The JEDEC SOP (FN) is not available in Japan. TC4044B the latches composed by four independent R/S flip- flop circuits. TC4044B fabricated with NAND gates is suitable for data processing of four bits configuration. four output lines can have high impedance regardless of the contents of latches by means of common ENABLE input to make connection to the bus lines easy. MAXIMUM RATINGS P (DIP16-P-300-2.54A) Weight : 1.00g (Typ.) CHARACTERISTIC SYMBOL RATING UNIT DC Supply Voltage Vop Vs5 0.5~Vss + 20 V F (SOP16-P-300-1.27) FN (SOL16-P-150-1.27) Input Voltage Vin | Vss-0.5~Vpp+0.5 | V Weight: 0.189 (Typ) Weight : 0.139 (Typ) Output Voltage Vout Vss -0.5~Vpp + 0.5 V PIN ASSIGNMENT DC Input Current lin +10 mA Power Dissipation Pp 300 (DIP)/ 180 (SOIC) | mw , NJ Operating T _40~85 Qa4if 116 Vpp Temperature Range opr nc 20 15 s4 Storage Temperature Range P Tstg - 65~150 C si3[T 1] 14 R4 R140 M13 Q1 LOGIC DIAGRAM ENABLE 5 L i 12 R323 ENABLE > OD _ R267 11 $3 mo ed bw 3 SS R1 a 3 Q1 $ (TOP VIEW) s1 R2 6 9 Q2 TRUTH TABLE $ $2 E R3 72 77 23 L H 33 7717 H R4 14 7 24 H H No Change , * : Dont Care $4 45 HZ: High Impedance 2001-05-17TOSHIBA TC4044BP/BF/BFN RECOMMENDED OPERATING CONDITIONS (Vss = 0V) CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT DC Supply Voltage Vop 3 18 Vv Input Voltage Vin 0 _ Vop Vv STATIC ELECTRICAL CHARACTERISTICS (Vss = OV) SYM- - 40C 25C 85C CHARACTERISTIC |B, | TEST CONDITION [Voo UNIT (v) | MIN. | MAX. | MIN. | TYP. | MAX. | MIN. | MAX. 5| 495} | 495] 500/ | 495] aoe tage | YOH Nour] <A 10! 9.95] | 995 ]1000} | 995] urpur vorag IN= ss VDD 15[14.95 | |1495 |15.00| |1495| | | 5} | 0.05 | | 0.00] 0.05 | | 0.05 el tae Vou Vout] <1HA 101 | 005 | | o00| 005 | | 0.05 P g INT $848 DD 15} | 0.05 | | 0.00 | 0.05 | | 0.05 Von= 4.6V 5/ -0.61] | -0.51]-1.0} | -0.42] Vou= 2.5V 5/ -2.50/ | -2.10!| -40 | | -1.70/ cut High low | Voy= 9.5V 10/ -1.50/ | -1.30] -22] | -1..0] 4 Vou = 13.5V 15| -4.00) | -3.40]-90 | | -2.80) Vin =Vss, V IN SS DD mA Vo. =0.4V 5| 0.61) 0.51, 1.2] 0.42) Output Low VoL =0.5V 10 1.50) 1.3 3.2 1.10) Current OFT Vo. = 1.5V 15| 4.00} 34] 120] 2.80} Vin =Vss, Vop Vout =0.5V, 4.5V 5; 35] 3.5 | 2.75) 35}, Input High y,, | Vour=1.0V, 9.0V | 10] 7.0 | 7.0 | 5.50} 70) Voltage M) Vour = 1.5V, 13.5V| 15] 11.0 | 11.0 8.25| 1.0]; | lout| <A V Vout =0.5V, 4.5V 5; 5 | 2.25] 15} 1.5 Input Low y, | Vour=1.0v, 9.0v | 10) 30) 450} 30] 3.0 Voltage |) Vout =1.5V, 13.5V] 15] 40) 6.75, 40] 4.0 | lout | <1yuA Input |H Level] Iw | Vin=18V 18; 0.1; 10-5} O14] 1.0 Current | "L" Level} |i Vi, =0V 18; -0.1 |-10->| -0.1 -1.0 Output |"H Level} tow | Vou=18V is} | o4] | 4} 04] | 22 Leakage LA Current | L Level] Ip, | Vo, =0V 18} |-04] |-10-4]-04] | -12 5; 1 |0.002] 1 30 ourescent Supply Ipp =| Vin=Vss, Vop * 10; 2 _ 0.004 2 60 15; 4 |0.008} 4 | 120 * All valid input combinations. 2 2001-05-17TOSHIBA TC4044BP/BF/BFN DYNAMIC ELECTRICAL CHARACTERISTICS (Ta = 25C, Vss =0V, C, = 50pF) CHARACTERISTIC SYMBOL TEST CONDITION Vop(V) MIN. TYP. MAX. UNIT Output Transition Time > i 70 200 (Low to High) ty 10 - 3 100 9 15 _ 30 80 Output Transition Time > - 70 200 (High to Low) tra 10 35 100 g 15 30 80 Propagation Delay Time tou . i is 0 (SET, RESET - Q) tout 15 _ 35 100 ns Propagation Delay Time pH2 R, = 1kQ 10 35 100 (ENABLE - Q) tozH 15 _ 30 70 3-State t 5 55 180 Propagation Delay Time eZ R,=1kO 10 30 100 (ENABLE - Q) tozt 15 _ 25 70 Min. Pulse Width > a 2s 100 (SET, RESET) tw. 0 7 20 80 15 20 40 Input Capacitance Ci _ 5 7.5 pF 3 2001-05-17TOSHIBA TC4044BP/BF/BFN WAVEFORMS FOR MEASUREMENT OF DYNAMIC CHARACTERISTICS WAVEFORM 1. 20ns 20ns p< > 90% SET \ 50% /50% \ ] om \______/ 10% 10% + 20ns 20ns AVE 90% 05 RESET 150% 50% a 10% < twi > 90% 0% Q 50% 50% _J tou tout 1026 7 | 10% 1 I trae thu WAVEFORM 2. 20n 20n p< < som, [0% ENABLE fom 50% sou Nio% Q 190% 10% teu touz 90% a Q 10% toz: tuz 2001-05-17TOSHIBA TC4044BP/BF/BFN DIP 16PIN PACKAGE DIMENSIONS (DIP16-P-300-2.54A) Unit in mm 18 moo ee & a uu + a ~2 3 3 / 19.75MAx 19.250.2 0.95:0.1 Q.735TYP | | Weight : 1.00g (Typ.) Unit in mm SOP 16PIN (200mil BODY) PACKAGE DIMENSIONS (SOP16-P-300-1.27) 16 90 HHEHHEEE HEH HAHAHA oe 0.705TYP i 0.43104 10.25 0) 1.27 10.8MAX 0.1578-45 0,810.2 Weight : 0.18g (Typ.) 5 2001-05-17TOSHIBA TC4044BP/BF/BFN SOP 16PIN (150mil BODY) PACKAGE DIMENSIONS (SOL16-P-150 -1.27) Unit in mm (Note) This package is not available in Japan. 16 9 ARAAARE HH HE BE EAH E__4 1 8 3.940.1 6.0+0.2 9.9+0.1 x z 3 B-& . a = =e 45 4 er n 2 740.1] S S F E 6 ? & o 3 0.7+0.3 Weight : 0.13g (Typ.) 6 2001-05-17TOSHIBA TC4044BP/BF/BFN RESTRICTIONS ON PRODUCT USE 000707EBA @ TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the Handling Guide for Semiconductor Devices, or TOSHIBA Semiconductor Reliability Handbook etc.. @ The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (Unintended Usage). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. @ The products described in this document are subject to the foreign exchange and foreign trade laws. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 7 2001-05-17