6.3 FG Series Dimensions Markings on sleeve Sleeve A1 Date code 0.3 MIN. H MAX. MIN. F D 0.5 001 Serial number Super Capacitor FG 5.5 V FG 5.5 V 0.22 F 0.22 F A1 P 0.5 - MAX operating voltage Nominal capacitance Negative polarity identification mark d1 0.1 d2 0.1 Terminal FG Type Specifications Part Number MAX operating voltage Vdc MAX Voltage MAX ESR current at holding at 1 kHz Discharge 30 min. characteristics system (F) mA V Dimension (unit:mm) Nominal capacitance Charge system (F) Weight D H P d1 d2 g FG0H103ZF 5.5 0.010 0.013 300 0.015 4.2 11.0 5.5 5.08 2.7 0.2 1.2 0.9 FG0H223ZF 5.5 0.022 0.028 200 0.033 4.2 11.0 5.5 5.08 2.7 0.2 1.2 1.0 FG0H473ZF 5.5 0.047 0.060 200 0.071 4.2 11.0 5.5 5.08 2.7 0.2 1.2 1.0 FG0H104ZF 5.5 0.10 0.13 100 0.15 4.2 11.0 6.5 5.08 2.7 0.2 1.2 1.3 FG0H224ZF 5.5 0.22 0.28 100 0.33 4.2 13.0 9.0 5.08 2.2 0.4 1.2 2.5 FG0H474ZF 5.5 0.47 0.60 120 0.71 4.2 14.5 18.0 5.08 2.4 0.4 1.2 5.1 FG0H105ZF 5.5 1.0 1.3 65 1.5 4.2 16.5 19.0 5.08 2.7 0.4 1.2 7.0 FG0H225ZF 5.5 2.2 2.8 35 3.3 4.2 21.5 19.0 7.62 3.0 0.6 1.2 12.1 FG0H475ZF 5.5 4.7 6.0 35 7.1 4.2 28.5 22.0 10.16 6.1 0.6 1.4 27.3 FG0V155ZF 3.5 1.5 2.2 65 1.5 - 16.5 14.0 5.08 3.1 0.4 1.2 5.2 FGH Type Specifications Part Number MAX operating voltage Vdc MAX Voltage MAX ESR current at holding at 1 kHz Discharge 30 min. characteristics system (F) mA V Dimension (unit:mm) Nominal capacitance Charge system (F) Weight D H P d1 d2 g FGH0H104ZF 5.5 - 0.10 100 0.15 4.2 11.0 5.5 5.08 2.7 0.2 1.2 1.0 FGH0H224ZF 5.5 - 0.22 100 0.33 4.2 11.0 7.0 5.08 2.7 0.2 1.2 1.3 FGH0H474ZF 5.5 - 0.47 65 0.71 4.2 16.5 8.0 5.08 2.7 0.4 1.2 4.1 FGH0H105ZF 5.5 - 1.0 35 1.5 4.2 21.5 9.5 7.62 3.0 0.6 1.2 7.2 FGR Type Specifications Part Number MAX operating voltage Vdc MAX Voltage MAX ESR current at holding at 1 kHz Discharge 30 min. characteristics system (F) mA V Dimension (unit:mm) Nominal capacitance Charge system (F) Weight D H P d1 d2 g 5.1 FGR0H474ZF 5.5 0.47 0.60 120 0.71 4.2 14.5 18.0 5.08 2.4 0.4 1.2 FGR0H105ZF 5.5 1.0 1.3 65 1.5 4.2 16.5 19.0 5.08 2.7 0.4 1.2 7.0 FGR0H225ZF 5.5 2.2 2.8 35 3.3 4.2 21.5 19.0 7.62 3.0 0.6 1.2 12.1 20 Super Capacitors Vol.12 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2010.11.8 9565SCAVOL12E Specifications Series name Item Category temperature range MAX operating voltage FG, FGH type FGR type Capacitance allowance -25 to 70 5.5Vdc, 3.5Vdc FG0.010F to 4.7F FGH0.10F to 1.0F 80 , -20 ESR Refer to standard ratings Refer to standard ratings Current (30-minutes value) Capacitance ESR Current (30 minutes value) Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality No obvious abnormality Capacitance -40 to 85 5.5Vdc 0.47F to 2.2F Refer to "Measurement Conditions" 80 , -20 Refer to "Measurement Conditions" Measured at 1kHz, 10mA ; See also "Measurement Conditions" Refer to "Measurement Conditions" Surge voltage6.3V (5.5V type) 4.0V(3.5V type) Charge30 sec. Discharge9min 30sec. Number of cycles1000 Series resistance 0.010F 1500 0.022F 560 0.047F 300 0.10F 150 0.22F 56 0.47F 30 1.0F, 1.5F 15 2.2F, 4.7F 10 Discharge resistance0 Temperature852 (FGR) 702 (FG, FGH) Surge Appearance Capacitance ESR Capacitance ESR Characteristics Capacitance in different ESR temperature Current (30 minutes value) Capacitance ESR Current (30 minutes value) Lead strength (tensile) Capacitance ESR Vibration resistance Current (30 minutes value) Appearance 200% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Phase Satisfy initial ratings 6 Satisfy initial ratings No terminal damage 50% or higher than initial value 400% or less than initial value Phase 30% or higher than initial value 3 700% or less than initial value 200% or less than initial value Phase Satisfy initial ratings 5 1.5CV (mA) or below Within 20% of initial value Phase Satisfy initial ratings 6 Satisfy initial ratings No terminal damage Satisfy initial ratings Satisfy initial ratings No obvious abnormality No obvious abnormality Solderability Over 3/4 of the terminal should be covered by the new solder Over 3/4 of the terminal should be covered by the new solder Satisfy initial ratings Satisfy initial ratings No obvious abnormality No obvious abnormality Satisfy initial ratings Satisfy initial ratings No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality Solder heat resistance Temperature cycle High temp. and high humidity resistance High temperature load Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Self discharge characteristics (voltage holding characteristics) Phase 2 50% or higher than initial value 400% or less than initial value Phase 3 Phase 5 5.5V type: Voltage between terminal leads higher than 4.2V 3.5V type: Not specified Test conditions (conforming to JIS C 5160-1) Phase 2 Conforms to 4.17 Phase1 252 Phase2 -252 Phase3 -402 (FGR) Phase4 252 Phase5 702 (FG, FGH) 852 (FGR) Phase6 252 Conforms to 4.9 Conforms to 4.13 Frequency10 to 55 Hz Testing time6 hours Conforms to 4.11 Solder temp2455 Dipping time50.5 sec. 1.6mm from the bottom should be dipped. Conforms to 4.10 Solder temp26010 Dipping time101 sec. 1.6mm from the bottom should be dipped. Conforms to 4.12 Temperature conditionCategory MIN tempRoom temp Category MAX tempRoom temp Number of cycles5 Cycles Conforms to 4.14 Temperature402 Relative humidity90 to 95 RH Testing time2408 hours Conforms to 4.15 TempCategory MAX temp 2 Voltage appliedMAX operating voltage Series protection resistance0 Testing time1000480Hours Charging condition Voltage applied5.0Vdc (Terminal at the case's side be negative) Series resistance0 Charging time24 hours Storage Let stand for 24 hours in condition described below with terminals opened. Ambient temperatureLower than 25 Relative humidityLower than 70%RH Voltage between terminal leads higher than 4.2V Super Capacitors Vol.12 21 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2010.11.8 9565SCAVOL12E