Multilayer Organic (MLOTM) 0805 WCDMA Diplexer MLOTM TECHNOLOGY APPLICATIONS The 0805 diplexer is a best in class low profile multilayer organic passive device that is based on AVX's patented multilayer organic high density interconnect technology. The MLOTM diplexer uses high dielectric constant and low loss materials to realize high Q passive printed passive elements such as inductors and capacitors in a multilayer stack up. The MLOTM diplexers can support multiple wireless standards such as WCDMA, CDMA, WLAN, and GSM and are less than 0.6mm in thickness. These components are ideally suited for band switching for dual band systems. All diplexers are expansion matched to FR4 thereby resulting in improved reliability over standard Si and ceramic devices. Multiband applications including WCDMA, WLAN, WiMax, GPS, and cellular bands A Type 1940 Design Size Frequency (MHz) 7 Finish 7 = Au T = NiSn TR Packaging Tape & Reel TR = 3 Kpcs TR/500 = 500 pcs QUALITY INSPECTION Finished parts are 100% tested for electrical parameters and visual characteristics. OPERATING TEMPERATURE -40C to +85C TERMINATION Finishes available in Ni/Sn, Immersion Sn, Immersion Au and OSP coatings which are compatible with automatic soldering technologies which include reflow, wave soldering, vapor phase and manual. Top View 6 1 2 5 2 3 4 3 1 5 4 POWER CAPACITY 4.5W Maximum Low Insertion Loss Excellent Solderability Low Parasitics Low Profile Bottom View 0.200.10 0.200.10 (0.0080.004) (0.0080.004) 1 2 3 0.040.04 (0.0020.002) 1.280.20 (0.0500.008) 0.250.10 (0.0100.004) 0.950.05 (0.0370.002) 0.200.10 0.200.10 (0.0080.004) (0.0080.004) Side View 0.640.05 (0.0250.002) 6 5 4 2.120.20 (0.0830.008) Terminal No. 1 2 3 4 5 6 0.550.10 (0.0220.004) 0.440.10 0.440.10 (0.0170.004) (0.0170.004) Unit: mm (inches) Terminal Name High Frequency Port GND Low Frequency Port GND Common Port GND PART NUMBER: DP05A19407TR ORIENTATION IN TAPE 6 * * * * COMPONENT DIMENSIONS AND FUNCTIONS HOW TO ORDER DP 05 LAND GRID ARRAY ADVANTAGES Specification @ 25C Size [mm(inches)] Height [mm(inches)] Volume (mm^3) Frequency Range (F1) (MHz) Frequency Range (F2) (MHz) Insertion Loss (F1, at Fc) (dB) Insertion Loss (F2, at Fc) (dB) Attenuation (F1) at (F2) (dB) Attenuation (F2) at (F1) (dB) VSWR (Input @ F1) VSWR (Input @ F2) VSWR (Lowband @ F1) VSWR (Highband @ F2) 6 2.12 x 1.28 (0.083 x 0.050) 0.55 (0.021) 1.5 89268 1940230 -0.4 -0.65 -23 -20 1.3 1.4 1.4 1.2 129 Multilayer Organic (MLOTM) 0805 WCDMA Diplexer S PARAMETER MEASUREMENTS 0 0 -5 dB(S(1.1) dB(S(2.1) dB(S(1.1) dB(S(3.1) -10 -10 -15 -20 -25 -30 High Band Low Band 0.8 1.0 -30 -40 Return Loss -50 Return Loss -35 0.4 0.6 -20 1.2 1.4 1.6 1.8 2.0 2.2 -60 0.4 0.6 2.4 2.6 0.8 1.0 1.2 1.4 freq, GHz 1.6 1.8 2.0 2.2 2.4 2.6 freq, GHz -5 dB(S(2.3)) -10 -15 -20 Isolation -25 -30 -35 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 freq, GHz 6 Note: Measurements were taken using an Anritsu 4 port VNA; Diplexer was mounted on a custom evaluation board. To reduce systematic errors from the VNA, the coaxial measurement cables, and evaluation board, a Short-Open-Load-Thru (SOLT) calibration was performed, using a custom fabricated calibration substrate. This is the most common coaxial calibration methods. 130