Wireless Local Loop Transmit and Receive
UNH Transmit and Receive
Dual Band 802.11 WLAN
WiMAX
CATV
Applications
August 2007 - Rev 15-Aug-07
Operation of this device above any of these parameters may cause damage.
0.05-3.0 GHz
High Dynamic Range Amplifier
Page 1 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
CMM6001-SC
Functional Block Diagram
Input Ground Output
Bias
Ground
123
4
Features
Description
0.05 to 3.0 GHz Frequency Range
37 dBm Output IP3
2.8 dB Noise Figure
12.5 dB Gain
20.5 dBm P1dB
SOT-89 SMT Package, RoHS Compliant
Single Power Supply
+3V to +5V Voltage Rail
The CMM6001-SC is a high dynamic range amplifier designed
for applications operating within the 0.05 to 3.0 GHz frequency
range. It is an ideal solution for transmit and receive functions
where high linearity is required. The amplifier has the flexibility
of being optimized for a number of wireless applications. The
combination of low NF and high IP3 at the same bias point
make it an ideal transmit or receive solution when used in
applications including cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz;
MMDS (multichannel multipoint distribution systems)
operating from 2.2 to 2.7 GHz; and WLAN (wireless LAN)
operating at 2.4 GHz.
The CMM6001-SC is packaged in a low-cost space efficient,
surface mount SOT-89 package which provides excellent
electrical stability and low thermal resistance. All devices are
100% RF and DC tested.
Supply Voltage
RF Input Power
Storage Temperature
Junction Temperature
Operating Temperature
Thermal Resistance
+6.0 V
+10 dBm
-55ºC to 150ºC
150ºC
-40ºC to +85ºC
65º C/W
Absolute Maximum Ratings
Parameter Condition Min Typ Max Units
zHG0.3egnaR ycneuqerF
Gain Externally matched 10.5 12.5 dB
Input Return Loss Externally matched -10 dB
mBd73+33+3PI tuptuO
Bd8.2erugiF esioN
mBd5.02Bd1P tuptuO
Am0015755egnaR tnerruC gnitarepO
V0.5egatloV ylppuS
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Notes:
1. T = 25°C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
0.05
Page 2 of 5
Application Circuit
Ref Designator Value Description Size
C1, C4 56 pF MCH185A560JK 0603
C2 0.1 F VITR 0.1 F 25V CER 0603
CAP 0603 X7R 10%
L1 10 nH TOKO LL 1608-F10NJ 0603
L2 12 nH TOKO LL 1608-F12NK 0603
CMM6001-SC
UnitsTypicalParameter
Frequency Range 900 1900 2400 MHz
Gain 12.5 11.5 10.8 dB
Input Return Loss -18.0 -11.5 -10.0 dB
Output Return Loss -17 -16 -15 dB
Output IP3 +37 +37 +37 dBm
Output P1dB 20.5 19.5 19.5 dBm
Noise Figure 2.7 2.8 2.9 dB
Notes:
1. Typical values reflect performance in recommended application circuit.
20
10
0
-10
-20
-30
-40
0.5 1.0 1.5 2.0 2.5 3.0
Frequency, GHz
Magnitude, dB
S21
S11
S22
S-Parameters vs Frequency
RF
OUT
uuuu
uuuu
C4
56 pF
L2
12 nH
Vcc
5V
C2
0.1 F
L1
10 nH
RF
IN
CMM6001-SC
SOT-89
T = 100 mil
INPUT MATCHING NETWORK
C1
56 pF T = 70 milT = 375 mil T = 485 mil
MIMIX
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
August 2007 - Rev 15-Aug-07
0.05-3.0 GHz
High Dynamic Range Amplifier
Page 3 of 5
Typical Scattering Parameters (Vd = +5V, Ids = 75 mA, T = 22°C, unmatched device in a 50 ohm system)
CMM6001-SC
Frequency S 11 S21 S12 S22
(MHz) (Mag) (Ang) (Mag) (Ang) (Mag) (Ang) (Mag) (Ang)
300 0.313 -38.56 4.435 159.70 0.118 -2.96 0.090 -50.49
400 0.307 -43.12 4.382 155.90 0.118 -7.56 0.078 -44.05
500 0.305 -48.70 4.344 151.60 0.118 -11.62 0.072 -38.92
600 0.304 -54.84 4.309 147.20 0.117 -15.23 0.070 -35.16
700 0.305 -61.22 4.270 142.70 0.117 -18.70 0.070 -32.63
800 0.307 -67.68 4.234 138.20 0.117 -22.02 0.071 -31.18
900 0.310 -74.20 4.197 133.60 0.116 -25.29 0.073 -30.88
1000 0.313 -80.57 4.158 129.00 0.116 -28.50 0.076 -31.21
1100 0.316 -86.85 4.122 124.40 0.115 -31.71 0.078 -31.76
1200 0.318 -93.11 4.085 119.90 0.115 -34.88 0.082 -32.50
1300 0.322 -99.29 4.043 115.30 0.114 -37.94 0.086 -33.84
1400 0.324 -105.40 4.004 110.70 0.114 -40.98 0.090 -35.26
1500 0.327 -111.40 3.960 106.20 0.113 -44.08 0.094 -36.85
1600 0.329 -117.40 3.919 101.70 0.112 -47.07 0.097 -38.64
1700 0.332 -123.40 3.879 97.22 0.112 -50.08 0.101 -40.76
1800 0.335 -129.20 3.838 92.77 0.111 -53.15 0.104 -42.85
1900 0.337 -135.00 3.799 88.32 0.110 -56.07 0.108 -45.06
2000 0.339 -140.80 3.760 83.87 0.109 -59.11 0.111 -47.37
2100 0.340 -146.50 3.720 79.47 0.109 -62.08 0.114 -49.53
2200 0.341 -152.30 3.679 75.03 0.108 -65.06 0.118 -51.72
2300 0.342 -158.20 3.639 70.64 0.107 -67.98 0.121 -53.76
2400 0.343 -164.10 3.600 66.25 0.106 -71.02 0.124 -55.82
2500 0.343 -169.80 3.561 61.89 0.105 -73.95 0.127 -57.84
2600 0.344 -175.80 3.524 57.51 0.105 -76.90 0.130 -59.75
2700 0.344 178.20 3.486 53.16 0.104 -79.96 0.133 -61.67
2800 0.344 172.20 3.448 48.81 0.103 -82.91 0.135 -63.35
2900 0.344 166.10 3.410 44.46 0.102 -85.93 0.137 -65.11
3000 0.344 160.00 3.373 40.13 0.101 -88.99 0.139 -66.85
S-Parameter Data Files are available online at www.mimixbroadband.com.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
August 2007 - Rev 15-Aug-07
0.05-3.0 GHz
High Dynamic Range Amplifier
Page 4 of 5
Physical Dimensions
123
4
XXXXXXX
XXXXXX
ZYYWW
DIMENSIONS IN MILLIMETERS
[INCHES]
4.50
[0.177]
1.73
[0.068]
0.46
[0.18]
3X 1.50
[0.059]
3.00
[0.118]
0.76
[0.030]
0.38
[0.015]
0.38
[0.015]
4.41
[0.163]
1.55
[0.061]
2.50
[0.096]
0.71
[0.028]
MARKINGS:
XXXXXXX = MIMIX MODEL NO.
XXXXXX = WAFER LOT NO.
ZYYWW = DATE CODE (YR/WEEK)
FIRST LETTER COUNTRY OF ORIGIN IF OTHER THAT USA
0.99
[0.039]
0.58
[0.023]
0.64
[0.025]
0.86
[0.034]
1.27
[0.050]
3.48
[0.137]
5.33
[0.210]
3.86
[0.152]
1.70
[0.067]
2.06
[0.081]
0.41
[0.016]
CMM6001-SC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
August 2007 - Rev 15-Aug-07
0.05-3.0 GHz
High Dynamic Range Amplifier
Page 5 of 5
CMM6001-SC
Ordering Information
Part Number for Ordering Package
CMM6001-SC-0G00
CMM6001-SC-0G0T
Matte Tin plated RoHS compliant SOT-89 surface-mount power package in
bulk quantity
Matte Tin plated RoHS compliant SOT-89 surface-mount power package in
tape and reel
PB-CMM6001-SC-0000 Evaluation Board with SMA connectors for CMM6001-SC
We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager
for more information regarding different plating types.
Handling and Assembly Information
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
August 2007 - Rev 15-Aug-07
0.05-3.0 GHz
High Dynamic Range Amplifier
