ECO-PACTM 1 Single Phase AC Controller Modules PSW1C40 ITRMS VRRM = 44 A = 600-1600 V Preliminary Data Sheet VRSM VDSM (V) 700 900 1300 1500 1700 VRRM VDRM (V) 600 800 1200 1400 1600 Symbol I TRMS ITAVM ITAVM ITSM i2 dt (di/dt)cr Type PSW1C PSW1C PSW1C PSW1C PSW1C IJ 40/06 40/08 40/12 40/14 40/16 H G EF AB Test Conditions Maximum Ratings TVJ = TVJM TC = 75 C; MN 180 sine 44 A 32 A TC = 85 C; 180 sine 27 A TVJ = 45 C t = 10 ms (50 Hz), sine 520 A VR = 0 t = 8.3 ms (60 Hz), sine 560 A TVJ = 125 C t = 10 ms (50 Hz), sine 460 A VR = 0 t = 8.3 ms (60 Hz), sine 500 A TVJ = 45 C t = 10 ms (50 Hz), sine 1350 As VR = 0 t = 8.3 ms (60 Hz), sine 1300 As TVJ = 125 C t = 10 ms (50 Hz), sine 1050 As VR = 0 1030 As 150 A/s t = 8.3 ms (60 Hz), sine TVJ = 125 C repetitive, IT = 45 A f=50Hz, tP=200s VD=2/3VDRM IG=0.45 A non repetitive,IT = ITAVM 500 A/s 1000 V/s diG/dt=0.45A/s (dv/dt)cr TVJ = 125 C VD=2/3VDRM RGK= , method 1 (linear voltage rise) PGM PGAVM VRGM TVJ TVJM Tstg VISOL TVJ = 125 C tP=30s 10 W IT =ITAVM 5 W 0.5 W 10 V -40... + 125 125 C C -40... + 125 C 50/60 Hz, RMS t = 1 min 2500 V IISOL 1 mA 3000 V 1.5 - 1.8 14 - 16 18 Nm lb.in. g tP=300s t=1s Md Mounting torque (M4) Weight typ. Features * * * * * * Thyristor controller for AC (circuit W1C acc. to IEC) for mains frequency Isolation voltage 3000 V Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL registered, E 148688 Applications * * * * Switching and control of single and three phase AC circuits Light and temperature control Softstart AC motor controller Solid state switches Advantages * * * * * Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Data according to IEC 60747 refer to a single thyristor unless otherwise stated 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/ ECO-PACTM 1 Symbol Test Conditions Characteristic Value ID,IR VT VTO rT VGT TVJ = 125C, VR = VRRM, VD=VDRM IT = 60 A, 1.41 V 0.85 V 10.0 m TVJ = 25 C For power-loss calculations only VD=6V 3 mA TVJ= 25C 1.5 V TVJ=-40C 1.6 V IGT VD=6V TVJ= 25C 100 mA TVJ=-40C 200 mA VGD IGD IL TVJ= 125C VD=2/3VDRM 0.2 V TVJ= 125C VD=2/3VDRM 10 mA TVJ= 25C, tP=10s, VD=6V 450 mA TVJ= 25C, VD=6V, RGK= 200 mA TVJ= 25C, VD=1/2VDRM 2 s TVJ= TVJM; IT=20A; tp=200s;-di/dt=10A/s typ. 150 s IG=0.45A, diG/dt=0.45A/s IH tgd IG=0.45A, diG/dt=0.45A/s tq VR=100V; dv/dt=20V/s; VD=2/3VDRM RthJC RthJK ds dA a per thyristor; DC per module per thyristor; sine 180 el per module Creeping distance on surface Creeping distance in air Max. allowable acceleration typ. 0.88 0.44 1.1 K/W K/W K/W typ. 0.55 K/W 6.6 9.7 50 mm mm m/s Package style and outline Dimensions in mm (1mm = 0.0394") 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/