Single Phase PSW1C40 ITRMS = 44 A
AC Controller Modules VRRM = 600-1600 V
Preliminary Data Sheet
Features
•Thyristor controller for AC (circuit
W1C acc. to IEC) for mains frequency
•Isolation voltage 3000 V∼
•Planar glass passivated chips
•Low forward voltage drop
•Leads suitable for PC board
soldering
•UL registered, E 148688
Applications
•Switching and control of single and three
phase AC circuits
•Light and temperature control
•Softstart AC motor controller
•Solid state switches
Advantages
•Easy to mount with two screws
•Space and weight savings
•Improved temperature and power
cycling capability
•High power density
•Small and light weight
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
ECO-PACTM 1
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
VRSM VRRM Type
VDSM VDRM
(V) (V)
700 600 PSW1C 40/06
900 800 PSW1C 40/08
1300 1200 PSW1C 40/12
1500 1400 PSW1C 40/14
1700 1600 PSW1C 40/16
Data according to IEC 60747 refer to a single thyristor unless otherwise stated
Symbol Test Conditions Maximum Ratings
ITRMS TVJ = TVJM 44 A
ITAVM TC = 75 °C; 180° sine 32 A
ITAVM TC = 85 °C; 180° sine 27 A
ITSM TVJ = 45 °C t = 10 ms (50 Hz), sine 520 A
VR = 0 t = 8.3 ms (60 Hz), sine 560 A
TVJ = 125 °C t = 10 ms (50 Hz), sine 460 A
VR = 0 t = 8.3 ms (60 Hz), sine 500 A
∫∫
∫∫
∫ i2 dt TVJ = 45 °C t = 10 ms (50 Hz), sine 1350 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 1300 A²s
TVJ = 125 °C t = 10 ms (50 Hz), sine 1050 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 1030 A²s
(di/dt)cr TVJ = 125 °C repetitive, IT = 45 A 150 A/µs
f=50Hz, tP=200µs
VD=2/3VDRM
IG=0.45 A non repetitive,IT = ITAVM 500 A/µs
diG/dt=0.45A/µs
(dv/dt)cr TVJ = 125 °C VD=2/3VDRM 1000 V/µs
RGK= ∞, method 1 (linear voltage rise)
PGM TVJ = 125 °C tP=30µs ≤10 W
IT =ITAVM tP=300µs ≤5W
PGAVM 0.5 W
VRGM 10 V
TVJ -40... + 125 °C
TVJM 125 °C
Tstg -40... + 125 °C
VISOL 50/60 Hz, RMS t = 1 min 2500 V∼
IISOL ≤ 1 mA t = 1 s 3000 V∼
MdMounting torque (M4) 1.5 - 1.8 Nm
14 - 16 lb.in.
Weight typ. 18 g
EF
MN
IJ
G
H
AB
http://store.iiic.cc/
ECO-PACTM 1
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Package style and outline
Dimensions in mm (1mm = 0.0394“)
Symbol Test Conditions Characteristic Value
ID,IRTVJ = 125°C, VR = VRRM, VD=VDRM ≤3mA
VTIT = 60 A, TVJ = 25 °C ≤1.41 V
VTO For power-loss calculations only 0.85 V
rT10.0 mΩ
VGT VD=6V TVJ= 25°C ≤1.5 V
TVJ=-40°C ≤1.6 V
IGT VD=6V TVJ= 25°C ≤100 mA
TVJ=-40°C ≤200 mA
VGD TVJ= 125°C VD=2/3VDRM ≤0.2 V
IGD TVJ= 125°C VD=2/3VDRM ≤10 mA
ILTVJ= 25°C, tP=10µs, VD=6V ≤450 mA
IG=0.45A, diG/dt=0.45A/µs
IHTVJ= 25°C, VD=6V, RGK= ∞≤200 mA
tgd TVJ= 25°C, VD=1/2VDRM ≤2µs
IG=0.45A, diG/dt=0.45A/µs
tqTVJ= TVJM; IT=20A; tp=200µs;-di/dt=10A/µs typ. 150 µs
VR=100V; dv/dt=20V/µs; VD=2/3VDRM
RthJC per thyristor; DC 0.88 K/W
per module 0.44 K/W
RthJK per thyristor; sine 180° el typ. 1.1 K/W
per module typ. 0.55 K/W
dsCreeping distance on surface 6.6 m m
dACreeping distance in air 9.7 m m
aMax. allowable acceleration 50 m/s²
http://store.iiic.cc/
