TMC Series Established Reliability TACmicrochipTM KEY FEATURES * * * * Weibull graded Reliability 0.1% / k hrs Low leakage Conformance testing (Lot by Lot) * Extended traceability * Approved for use in life support and implantable medical devices ENVIRONMENTAL FRIENDLY COMPONENT L CASE DIMENSIONS: millimeters (inches) Code POLARITY BAND NOT TO EXCEED CENTER LINE H EIA Code EIA Metric %K 0402 1005-07 L 0603 1608-10 Lt W +0.20 -0.00 +0.008 (0.039 -0.000 ) +0.20 1.60 -0.00 +0.008 (0.063 -0.000 ) +0.20 2.00 -0.00 +0.008 (0.079 -0.000 ) 1.00 % S Length (L) R 0805 2012-15 A 3.200.20 1206 3216-18 (0.1260.008) % T 3528 3528-12 3.50 +0.20 -0.20 (0.138 +0.008 ) -0.008 Width (W) +0.20 0.50 -0.00 +0.008 (0.020 -0.000 ) Height (H) Termination Spacing(S) Minimum Average Termination Mass Length (Lt) +0.20 0.50 -0.00 +0.008 (0.020 -0.000 ) 0.40 min. 0.10 (0.004) 2.0mg 0.65 min. 0.15 (0.006) 8.6mg 0.85 min. 0.15 (0.006) 29.9mg 1.600.20 (0.0630.008) 2.00 min. 0.15 (0.006) 44.6mg 1.20 max. (0.047 max.) 2.30 min. 0.15 (0.006) +0.15 0.85 -0.00 +0.006 +0.006 (0.033 -0.000 ) (0.033 -0.000 ) +0.15 +0.15 1.35 -0.00 1.35 -0.00 +0.006 +0.006 (0.053 -0.000 ) (0.053 -0.000 ) +0.15 0.85 -0.00 1.600.20 (0.0630.008) 2.80 +0.20 -0.10 (0.110 +0.008 ) 65mg -0.004 HOW TO ORDER TMC R 106 M 010 E HS Type TACmicrochipTM Case Code 0402=K 0603=L 0805=R 1206=A Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance K=10% M=20% Rated DC Voltage 002=2Vdc 003=3Vdc 004=4Vdc 006=6.3Vdc 010=10Vdc 016=16Vdc 020=20Vdc Packaging E = Non Modular qty. supplied on 7" reel Termination and Special Requirements HS = Tin Termination HR = Gold Termination Alternative characters may be used for special requirements. TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: Termination Finish: +85C: +125C: +85C: +125C: All technical data relate to an ambient temperature of +25C 0.47F to 68F 10%; 20% 0.005CV or 0.2A whichever is the greater 3 4 6.3 10 16 20 2 2.7 4 7 10 13 3.9 5.2 8 13 20 26 2.6 3.2 5 8 12 16 -55C to +125C HRC5000, Weibull B grade, 0.1% per 1,000 hours Nickel and Tin Plating (standard), Nickel and Gold Plating option available upon request 45 TMC Series Established Reliability TACmicrochipTM ESTABLISHED RELIABILITY RANGE (EIA Sizes) Capacitance Cap. (F) Code 0.33 334 0.47 474 0.68 684 1.0 105 1.5 155 2.2 225 3.3 335 4.7 475 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 100 107 150 157 220 227 2.0V Developmental Ratings - subject to change NOTE: Encircled letters designate codes where qualification is pending, contact local sales office for current status. 46 (LETTER DENOTES CASE SIZE) Voltage Rating DC (VR ) at 85C 3.0V 4.0V 6.3V K K R R R R R R L R R 16V K /L K/L K/L L L L/R L/R R R R L L L R A A 10V T 20V L R R